problem with WRVS4400N router.

Similar Questions

• Problem with new router WRVS4400N

  I recently bought a new Cisco WRVS4400N router for our network which has 19 computers connected to a switch of 24 ports.  We currently use a D-Link router and migrate to the Cisco router.  The problem I have is that as soon as I connect one of our servers or the switch 24 ports to the Cisco router I can no longer access the internet or the connection to the network, I can also access the routers of each server configuration.  If I connect the router to make a stand-alone computer I can access the configuration and change things, but as soon as I connect the server or switch 24 ports everything dies (all lights are green on the router but if everything is connected).

  Has anyone experience this problem with this router?

  Any help would be greatly appreciated.

  Kind regards

  Shawn

  Hi Shawn,

  Thank you for posting. The server provides DHCP on your network? If so, disable the DHCP server on the WRVS4400N before you connect it to your network.

• Problem with wag160N router wireless

  Hi all. Sorry for the typos etc I am new in the forum :-). Please, if the subject has moved to another subforum do it.

  So, here's the problem: last week, I bought the WAG160N wireless-N adsl2 + modem router (version 2) and yestreday I formatted my laptop 2, so today I decided to install a new one.

  I work 2 hours on it now, but still I can't find a solution. I started with the first cd, as required by the guide. Everything works well until the installation wizard step that attempts to connect to the router. At this point, he's looking for 5 minutes and then he said that he is not able to communicate with the router and wonder to check the connection again. I connected everything as it should (the gray wire of telephone jack to the socket of the router that says DSL, cable - ethernet - yellow of Gate 1 of the router ethernet for the laptop and then the AC/DC to the router and power.) I click next to the installation wizard, then he said to the power on the router... I do it and it checks then 5 minutes and again, he says that can't find it and tell me to double check and the story goes like this. I made 6 - 7 times but nothing. I also used the netwotk magical Wizard that was installed to fix the problem (because it recognizes that there is connection problem), but is not able to set in! What should I do? The ISP said that they don't sell Linksys products for their stores (I do not know the ISPS work on other countries, here they sell routers, adsl packs ect in their store) so they can't provide me with support. Can someone help me? Its the first time I use a linksys for me product and I don't know how to install it without the cd.

  I use windows vista pre sp2 on two laptops.

  I must also say that I have no problem with the ethernet connection the baudtec my ISP gave in the pack, that I bought when I activated my ADSL (2 years ago). IM connected with it now to view the topic.

  Sorry for my bad English and im sore right now that I can't think of what other info you might need, post and I will answer you.

  Thx for reading.

  Hello

  Connect your device directly to your pc via ethernet cable.

  Try to find the ip address of your device using the arp - a command

  Try to ping your router/adsl with address (192.168.1.1) ip of the device. u should get a response, if no response then in your pc check the LAN connection properties and enable DHCP.

  If you get always no response to ping the device, try and set an ip address in the range (192.168.1.1 or whatever your ip devices). Now, try to configure the device to cd Wizard help.

  Correct me if im wrong.

  Concerning

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• Help for BBM blackBerry Smartphones & Facebook does not not for 9320 - problem with "host Routing Table? -Virgin

  So, today I received my new 9320 at Virgin Mobile, first Blackberry & love the phone! but I can't use the BBM or Facebook app...

  At first I could not even access the browser while that connected to my wifi... then I phoned Virgin & they helped me to reset the settings on my BB that I could use the browser etc...

  I thought it was problem solved, until I discovered BBM and Facebook, use app world separate service? Anyway, I phoned up to Virgin because I wanted to do this job, they are included in my package & I did not understand why I can't access any of them...

  After a long phone call the problem has proved that the "host routing table" was empty and (according to in Virgin) there is a problem with new BlackBerry receiving these details... they said this isn't a problem on the end there & told me there is nothing more they can do so to click 'register now' and wait for the details...

  24 hours later and nothing, so I hope someone here can help me, make me a BB the whole point is things miss me actually lol and I feel now I'm paying for a phone contract I can't really use it, without any help from my provider?

  Any help?

  Or

  Anyone with a new BB knows something like that recently? Thank you

  Wow... Virgin you gave really there. You see, you PAY for 100% of your services and 100% of your formal support... at the moment, they seem to be or you deliver. Only they have the ability (in fact the RESPONSIBILITY!) to degenerate RIM requiring improved support of cases (from your description, it must be that... with a HRT empty, nothing that anyone here can do). End users have no free path to receive assistance from the RIM at all - only via the escalation. So, what I would do if I were you, is their ring back... but this time do not let you fob OFF... insist that, because you HAVE them, you have a contract with them and they are about to be in violation of this contract - they must solve your problem, degenerate into RIM if they wish.

  Good luck!

• Problem with IKEv2 routes w using PSK and RADIUS

  Hello

  I have a 7 881 + (15.2 (4) M2) connected to a 1001 ASR (03.07.01.S) via the Internet. The goal is to set up DVTI on the ASR, use FlexVPN on the CPE and inject crypto IKEv2 itineraries in the VRF on the EP for subnets protected on the SCE when using pre-shared key for authentication and RADIUS to return the attributes.

  I can get the tunnel works fine, but I can't get the cryptographic routes.

  My configs:

  7 881 + CPE:

  Crypto ikev2 keyring Keychain-CPE

  peer ASR

  address

  pre-shared key abcd

  !

  Profile of crypto ikev2 IKEV2-PROFILE-CPE

  match one address remote identity 255.255.255.255

  identity local fqdn cpe.ipsec.net

  sharing front of remote authentication

  sharing of local meadow of authentication

  Keyring key chain local-CPE

  DPD 30 2 periodic

  !

  Crypto ipsec transform-set esp - TFS-AES256-SHA-HMAC-aes 256 esp-sha-hmac

  tunnel mode

  !

  by default the crypto ipsec profile

  game of transformation-TFS-AES256-SHA-HMAC

  profile ikev2 IKEV2-PROFILE-CPE

  !

  Crypto ikev2 client flexvpn FLEX

  Peer 1

  Customer inside Loopback0

  customer connect Tunnel0

  !

  interface Loopback0

  IP 255.255.255.255

  !

  interface Tunnel0

  the negotiated IP address

  source of tunnel Dialer2

  ipv4 ipsec tunnel mode

  dynamic tunnel destination

  tunnel protection ipsec default profile

  PE OF THE ASR:

  Authorization group to the network IPSEC-AUTHOR of AAA AAA-GROUP-IPSEC-RADIUS

  !

  Crypto ikev2 60 2 dpd periodicals

  !

  Profile of crypto ikev2 IKEV2-PROFILE-ASR

  corresponds to fvrf FVRF

  match identity fqdn remote domain ipsec.net

  sharing front of remote authentication

  sharing of local meadow of authentication

  Keyring aaa IPSEC-AUTHOR

  AAA authorization user psk IPSEC-AUTHOR list

  virtual-model 1

  !

  Crypto ipsec transform-set esp - TFS-AES256-SHA-HMAC-aes 256 esp-sha-hmac

  tunnel mode

  !

  by default the crypto ipsec profile

  game of transformation-TFS-AES256-SHA-HMAC

  the value of RADU ikev2-profile

  answering machine only

  !

  type of interface virtual-Template1 tunnel

  no ip address

  source of tunnel GigabitEthernet0/0/3

  ipv4 ipsec tunnel mode

  tunnel vrf FVRF

  tunnel protection ipsec default profile

  Definition of RADIUS user name:

  CPE. IPSec.net

  Tunnel-Password = abcd,

  Framed-IP-Address = 172.16.0.254,

  Box-IP-Netmask = 255.255.255.254,

  Cisco-avpair = "ip:interface - config = vrf forwarding test",

  Cisco-avpair = "" ip:interface - config = address ip 172.16.0.255 255.255.255.254 ","

  Cisco-avpair = 'ipsec:route - value = interface',

  Cisco-avpair = "ipsec:route - value prefix = 32",

  Cisco-avpair = "ipsec:route - accept = any"

  The tunnel interface is coming on the CPE, the virtual access interface is implemented on the ASR. I could use BGP to Exchange routing between EP and CPE information, but I want to use IKE.

  I think the problem is because I don't know how to call a permission policy IKEv2 on PBS (in which I could set up a list of access for the ). But on the CPE, I have the following limitations:

  I want to use PSK for authentication, but no RADIUS server is available. So, the only other option for PSK authentication is a Keyring set locally, as there is no way to use a user name defined locally (local authentication) with a set of keys.

  So how can I trigger an IKEv2 authorization under the profile of IKEv2 policy?

  CPE (config-ikev2-profile) list of psk #aaa user authorization?

  The WORD AAA list name

  If I set a local aaa authorization list, then all authentication fails:

  AAA authorization network default local

  Profile of crypto ikev2 IKEV2-PROFILE-CPE

  by default the AAA user psk authorization list

  * 15:52:27.042 Dec 20 UTC: IKEV2-3-NEG_ABORT %: negotiation failed due to the ERROR: exchange Auth failed

  And there is no way to trigger that the authorization policy if I do not set the command above, is not it? I tried to modify the authorization policy by default with access list, but it is not taken into account.

  If I use a card with an access-list and IKEv2 encryption, I can get directions crypto on the ASR. But I want to use FlexVPN on the CPE.

  Is there a way to do this?

  Also the IOS configuration guides are not too useful

  Thank you

  Radu

  . "09:12:42.299 Dec 21 UTC: IKEv2:IKEv2 local AAA asks author ' 87.84.214.31 '.

  . "09:12:42.299 Dec 21 UTC: IKEv2:IKEv2 local AAA - political ' 87.84.214.31 ' does not exist.

  . 09:12:42.299 Dec 21 UTC: authorization IKEv2:IKEv2 162 error

  Not sure how resembles your config, but here it says that it cannot find

  ikev2 crypto 87.84.214.31 permission policy

  <...>

  If it is configured?

• Microsoft Update problems with Belkin router

  I installed the last Microsoft Update (yesterday) and from that moment, my router works.  I confirmed that the router is fine (it sends the signal without problems to other devices) so I'm sure it was the Microsoft update that caused the problem. How to take care of this problem?  I have a Belkin F7D2301 Surf v1000.  Any help you could provide would be much appreciated.

  In fact I thought to it.  There was an update that was missing from my Belkin (for some reason, the update was not necessary before the update).  As soon as I installed the update (click on "check for updates"), the problem has been resolved.  Thanks for your help, if.

• Several problems with the router WRT110

  First of all, the router disconnects randomly. As in, the router stopped broadcasting and will not be displayed on the list of the available when it arrives. When this happens, no wireless device cannot connect until the network resets.

  Second, whenever a wireless COMPUTER connects to the network, all network connections are lost for 5 to 10 minutes. However, this does not work when I connect other wireless devices to the network, such as my XBOX 360 console.

  Why does this happen? I'm tired of the random disconnection!

  Make sure that all Vista and Win 7 computers have IPv6 disabled under the properties of the LAN parameters for each card.

  WRT110 should have firmware version 1.0.04)is ou.05.  Disable UPnP in router.  Settings wireless Beacon Interval 75, threshold RTS and Fragmentation 2304, channel 1, 6 or 11.

• Problem with internet connection Wi - Fi Windows XP - very 'slow' packages

  Hi people, this problem has been driving me crazy for weeks, so I wonder if someone can provide a solution! Sorry for the long post, but I tried to put in as much information as possible.

  In short, I decided to rebuild an old laptop in Windows XP (2006) I (latest updates installed). I'm without audio (cannot find drivers), but this isn't so much a problem. The problem needs to connect to the WiFi.

  The internal WiFi card is an Intel (r) PRO/Wireless 2200BG (or, at least, it's the driver).

  WiFi is displayed as 'Connected' and ' Signal strength: Excellent "(as my laptop is sitting right next to the hub). Ethernet (wired) connection to the hub works perfectly. I have WiFi BT working connects perfectly with my Mac and my iPod, I know that there is absolutely no problem with the router.

  However, my laptop does not seem to want to connect WiFi, despite 'positive' messages above. All browsers (IE, Chrome, Firefox) display a message stating that they cannot connect to the internet. Nothing in browsers suggest that all DNS settings have been changed.

  I * think * the problem might be because the packets sent/received are still very low - if either enter three digits, I have a lot of luck. For now, they are stuck on envoys = 14, received = 3.

  So, what I have checked/tried is the following (all based on Google search) - none have worked:

  (1) I can confirm that the automatic Wireless Configuration is enabled, started and set to automatic, and that Windows is used to set up my network.
  (2) my wireless network appears in my favorite networks and is automatically connected to (or should be :-)) - I have added/removed the connection several times, check the wireless key, every time, without success.)
  (3) the TCP/IP menu is configured to obtain an IP address and a DNS service automatically.
  (4) type ipconfig/all at the command prompt seems to show that everything works OK:

  • The physical address is: 00-16-xx-xx-xx-xx (I removed the last few digits as it is an open forum, but is probably not a security issue)
  • DHCP is enabled.
  • Automatic configuration is enabled.
  • The IP address is 192.xxx.x.xx (as above)
  • Subnet mask is 255.255.255.0
  • Default gateway, DHCP and DNS server are all the 192.xxx.x.xxx (as above)

  However, IP routing is NOT enabled or is Proxy WINS. Node type appears as unknown.

  I tried the DNS, IP address in the command line (don't remember the command), hot flashes reset everything I can think of or have found via an internet search.

  I also tried the two separate Wireless USB key (only install the drivers - now deleted), which is not working.

  I am so right in thinking that everything seems OK, except the transfer of packages very low? Anyone who has any other control I can try - or better yet, a potential solution?

  Thank you!

  Hello c0ley,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:
  Take a look at step 6 in this article that give more details about it:
  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx
  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• [WRT1900AC] Problems with the subtitles (.) (SRT) with. MP4. AVI and others. MKV videos

  Hello

  I use the WRT1900ACS 2.0.0.173388 firmware and I noticed a few videos with. Just SRT subtitles does not work on my smarttv via DLNA server.

  I have some MKV videos with. The SRT subtitles I can perfectly look through DLNA, but. MP4. AVI and others. MKV seems simply do not find subtitles.

  All of these videos with. SRT subtitles, I can watch properly on my Mac or directly into the USB port on the TV, which seems to clearly be a problem with the router or some settings.

  I tried to rename the extension of the file from. MP4 and. AVI to MKV, but also did not work.

  Are there other settings that I can do?

  I suggest you use a software of 3 rd-party, which we are not trained for, that can integrate the file of external subtitles for YouTube videos. Media Server is a router feature that will allow you to stream multimedia files to your DLNA or active UPnP devices within your network. With this, external subtitles as SRTs file may or may not be detected because it is not a file of DLNA support.

• WAN problem with DLINK KvD-g1402s WVC210

  My wvc210 works fine on my local network, but I can't access it from the internet. I have read the manual and I have tried several solutions to this forum but still no luck. Who can help?

  WVC210 camera:
  Fixed IP: 192.168.0.99
  Active DDNS, dynDNS provider
  License to access Web alternative 8000

  Router D-Link KVD-G1402S:
  WAN: Dynamic IP address
  LAN: IP: 192.168.0.1
  Virtual server: 192.168.0.99 TWO 8000/8000 Camera

  If I go to http://xxxx.homedns.org/ to get the page of my router for dynDNS configuration works
  If I go to http://xxxx.homedns.org:8000 / get a time out
  If I check the port 8000 on the dynDNS site, he said of "the port is open and accepts connections...". »

  any ideas?

  There was a problem with the router. This router is known for problems with the virtual server...

  problem solved now

• Hello - problem with wrt54gl

  Hello.

  I have two problems with this router.

  1. I can not log in with the user name and password provided by my internet provider. I can't log in to the user interface of stock, I install tomato or dd wrt to be able to connect.

  2. I can't reach speeds greater than 4 Mbit/s cable (not wireless, cable).

  Any ideeas?

  Thank you in advance.

  Search the Forum to find out how to change the mtu to manual and use 1492.

  Or search for your product support page.

  Edit: or that someone you learn to type "change mtu linksys' in a google search.

• I think I'll have problems with registry - I can't add or remove programs, when I rebooted until windows starts I have SEEN 150/150 REGISTER... any ideas

  I had to restore my computer from these problems, had problems with wire4less router cause took off so wireless cause I got no internet.  Has worked with the provider, Charter and got back internet but do not add or remove programs - have problem with printer HP TrayApp, s if lack but cfan can't add restricted cause - restricted user-entered and gave access, but still does not work.  Will try F8 and start the repair to see if it works.  Any ideas?  HELP... l.Thanks

  Thanjs - I did take it to someone to clean.  Always have problemd with printer but am back to him.  Thanks for all your suggestions.  I guess I've done too many bugs diffedrent and messed up.

• RV082 problems with internet - downloading file corruption

  Hey guys,.
  I have the RV082 router and I'm having a strange problem.

  When I try and download files or applications, my computer happens to expire during the download and unexpectedly farm or the file that I am trying to download is corrupted.  I have never seen anything like this before.  I spent the time on the phone with my ISP and they said this isn't a problem on their end.  I am able to browse the internet without any problem.  I just have problems downloading stuff.

  I have reproduced this problem on other computers on my network.  If it is not isolated to my computer.  that tells me that there must be something wrong with the router.

  Is this a problem with my router settings?

  Any help is greatly appreciated.

  It's really weird. I suggest to manipulate the MTU of the RV082 section if this will solve the problem. Follow this link to determine the correct MTU size for router:

  http://Linksys.custhelp.com/cgi-bin/Linksys.cfg/php/enduser/std_adp.php?p_faqid=4454&p_created=11647...

  Also, make sure that you are using the latest firmware for the router said. You can download the latest firmware for the router on this link:

  http://www.Cisco.com/en/us/products/ps9926/index.html

  Apart from that, I suggest you contact support CISCO focus more on your problem. In my view, that this unit is part of serial company Cisco devices now supports. Try going to this link for other devices of the series business and the site where you can get your hands on Cisco for support:

  http://www.Cisco.com/Web/products/Linksys/index.html

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!