Problem with wag160N router wireless

Similar Questions

• Problem with new router WRVS4400N

  I recently bought a new Cisco WRVS4400N router for our network which has 19 computers connected to a switch of 24 ports.  We currently use a D-Link router and migrate to the Cisco router.  The problem I have is that as soon as I connect one of our servers or the switch 24 ports to the Cisco router I can no longer access the internet or the connection to the network, I can also access the routers of each server configuration.  If I connect the router to make a stand-alone computer I can access the configuration and change things, but as soon as I connect the server or switch 24 ports everything dies (all lights are green on the router but if everything is connected).

  Has anyone experience this problem with this router?

  Any help would be greatly appreciated.

  Kind regards

  Shawn

  Hi Shawn,

  Thank you for posting. The server provides DHCP on your network? If so, disable the DHCP server on the WRVS4400N before you connect it to your network.

• FTP with WRT160N router wireless problem

  I upgraded my router WRT54G, a little back and ever since then, I can't get my (CuteFTP 7.0) FTP software to work.

  I didn't change anything with the FTP software. The change ONLY on my system is the new router.

  Is there some sort of setting I need to change so that he could afford to FTP?

  OK - so I fixed it. I think that there is something more big wrong with my router at first. The night last wired connection to my wife worked very well and today he was completely dead. In fact, since I updated the firmware on the router about a month ago, his internet connection was for crap.

  I hooked the computer directly to the cable modem and it worked perfectly.

  So this morning, I bought a WRT54G2 - just hung and EVERYTHING worked from the outset - including my FTP software.

  My suggestion for buyers... avoid the 160N. I'm bummed I wasted $100ish on mine only to get the 2.5 use PITA.

• A30 - problem with intel pro Wireless 2200bg - wireless always turn off

  Hello.

  I have a problem with the wireless card Intel pci mini. I installed in the connector mini pci and connected the 2 wires. I also installed drivers and software to Intel. But the connection is always available. I changed the wireless switch located on the left side of my toshiba, but said software, the hardware radio switch is off.
  I reinstalled operaiting system XP Home, XP Pro, but all the time I have information that this switch is off.

  Thanks for any information

  Hello

  Please first check that when you the physical switch turn on wireless communication, you should also somewhere (probably near the switch) see an orange light.
  If this isn't the case, then there is something wrong.
  Did also attach you the antenna cables to the Wifi card?
  You use the Windows XP client or customer of Intel for wifi?

  BR

  Tom

• Problem with network controller / wireless driver

  Hello, I have problems with my computer network controller. I can't connet to the Internet wireless or wired. In addition, two of my USB Ports do not work.

  My system is HP Pavilion G4 - 2235dx

  A6 - 4400M with Radeon AMD

  Windows 7 Professional

  The hardware ID

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C

  PCI\VEN_168C & DEV_0032 & CC_028000

  PCI\VEN_168C & DEV_0032 & CC_0280

  There are other issues such as:

  PCI device

  SM Bus controller

  USB controller

  When you open Device Manager and every thing under "Other devices" are not available, you will get the real picture. Please I need your help to make this work again.

  Thank you.                       David

  Hi, David:

  Here are links to the drivers you need:

  1. first install the amd chipset driver and restart. You only want to use the first file on the Web page.

  This will install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  2. wireless card driver is the following:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  3 PCI device is the following:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• Help for BBM blackBerry Smartphones & Facebook does not not for 9320 - problem with "host Routing Table? -Virgin

  So, today I received my new 9320 at Virgin Mobile, first Blackberry & love the phone! but I can't use the BBM or Facebook app...

  At first I could not even access the browser while that connected to my wifi... then I phoned Virgin & they helped me to reset the settings on my BB that I could use the browser etc...

  I thought it was problem solved, until I discovered BBM and Facebook, use app world separate service? Anyway, I phoned up to Virgin because I wanted to do this job, they are included in my package & I did not understand why I can't access any of them...

  After a long phone call the problem has proved that the "host routing table" was empty and (according to in Virgin) there is a problem with new BlackBerry receiving these details... they said this isn't a problem on the end there & told me there is nothing more they can do so to click 'register now' and wait for the details...

  24 hours later and nothing, so I hope someone here can help me, make me a BB the whole point is things miss me actually lol and I feel now I'm paying for a phone contract I can't really use it, without any help from my provider?

  Any help?

  Or

  Anyone with a new BB knows something like that recently? Thank you

  Wow... Virgin you gave really there. You see, you PAY for 100% of your services and 100% of your formal support... at the moment, they seem to be or you deliver. Only they have the ability (in fact the RESPONSIBILITY!) to degenerate RIM requiring improved support of cases (from your description, it must be that... with a HRT empty, nothing that anyone here can do). End users have no free path to receive assistance from the RIM at all - only via the escalation. So, what I would do if I were you, is their ring back... but this time do not let you fob OFF... insist that, because you HAVE them, you have a contract with them and they are about to be in violation of this contract - they must solve your problem, degenerate into RIM if they wish.

  Good luck!

• problem with WRVS4400N router.

  Hello

  I have a problem with the new WRVS4400N router.

  After you have connected to my modem infrastructure and configured WAN configuration with my ISP provider,

  ISP see I am connected, I see that I am connected, get a GREAT link and link of 70M, about speed.

  Yet not be able to access the web trying to leave a different devices (TABLET, laptop) or different (WiFi, Ethernet cable) connections.

  When I am connected directly to modem infrastructure, Internet access is successful.

  In addition, what router previous (EDIMAX) which was also connected and I tried, access to the web succeeded.

  Can you please help me solve this problem?

  Not able to understand what is the problem.

  Thank you

  Can you access the WebGUI of the WRVS4400N when it is connected to the modem catch up.

  This is a cable modem?

  Try restarting the Modem, then once all lights went solid/normal and modem is stable, restart the WRVS4400N and try again.

  What about Simon
  http://www.linksysinfo.org

• problem with mode Dell Wireless 1395 mini-map standby in windows xp

  I have problem with my computer laptop inspiron 1525 and the mini-map dell 1395 wireless.

  I installed windows vista for about 4 months, and there is no problem with the wireless.

  now, I have installed windows xp prof.  and it's the wireless card works fine. I put my laptop mode "Eve" and after a walk to the top. the wireless card absolutely does not work.

  I tried to uninstall and install the driver, I tried to run windows backup, I tried to do what I can, but no useful idea.

  Tip: When I try to check for the networks without wire around me, he say like this but in Arabic "could not verify the 65535 channel, verification will be repeated later.

  http://www5.0ZZ0.com/2008/07/02/17/850863907.jpg

  [url = http://www.0zz0.com] [img] http://www5.0zz0.com/2008/07/02/17/850863907.jpg [line] [url]

  any body help me befor replacing the xp on vista

  
  

• Problem with the Logitech Wireless Speaker Adapter

  Hello

  It's been days trying to get my computer, a Dell Inspiron 1721 on Vista, working with the Logitech Wireless Speaker Adapter. There are no instructions to come with the adapter because it was said to be very easy to use, that well is not for me...

  The adapter works via Bluetooth. I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off. The adapter works as I have tried with a smartphone and it was so easy to do.

  Apparently something to do with A2DP, which does not have Vista. (I'm not an expert, I just repeat what I read on the forums...). If Yes, where can I find?

  Any help is welcome because I am completely lost on this one.

  Thanks adavance

  chikito11n

  There is no instructions to come with the adapter

  You can find the instructions on the Logitech support page. On the left side of this page is a link to the Getting Started Guide pdf which is the instructions.

  chikito11n

  I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off.

  The flashing green light means it tries to connect and pair, so it can not connect, or it can be connected, but not being able to pair.

  First of all, make sure your laptop is equipped with a bluetooth adapter.

  Then, make sure you have the latest bluetooth driver. Go to the Inspiron 1721 downloads page. In the drop-down list, select Vista. Expand the network category. Find your bluetooth adapter driver and install it if it is newer than your current driver. (These drivers are from 2007, then you probably already have the most recent).

  As the Getting Started Guide Logitech says "refer to the documentation that came with your device for pairing instructions. Dell does not provide these instructions, but they are available on the Microsoft website. However, page this guy has the instructions and screenshots and it is easier to follow than Microsoft. It also explains how to determine whether or not you have a bluetooth adapter and how to configure it to connect to a bluetooth device, then explains how pair or sync in Vista.

  Note that if you enter an access code in the Bluetooth Setup Wizard, the Getting Started Guide says to enter 0000.

• problem in connetion with my router wireless.

  I have a gateway verizon westell router model 7500 and whenever I try to connect using my computer vista laptop it ask username, password and domain to logon on the XP computer all he asks is the network key and I type in and it works, but not on vista

  Hello

  The laptop is probably configured to use the domain at work network.

  If it's the work laptop talk to the working population.

  If it's your portable private and you do not need it for network domain.

  Reconfigure the laptop to the network group.

  http://www.ezlan.NET/Win7/net_name.jpg

  * The screen says shoot Win 7, it's the same for Vista.

  Jack, MVP-Networking. WWW.EZLAN.NET

• Problems with Satellite C660 wireless

  My day 7 old Satellite C660 is constantly does not connect to wireless internet. It connects then stops loading web pages. I don't get no access or limited access note on the tray icon of system, but when I display the available networks it shows as connected with good resistance. I have 4 other wireless devices that runs through the same connection without problem. I checked the driver for my wireless card, and it is up to date.

  It drives me crazy and I think again the laptop to the store for a refund. Can anyone help?

  Thank you

  Steve

  Check if the BIOS update is available.
  Only thing you can do is update the BIOS in the hope that everything will be OK.
  I put t really know what else you can try.

  Did you perhaps tested WLAN connectivity by router s friend?

• problem with printing on wireless network

  Hello. I have a HP psc 2410 all-in-one printer.

  I recently bought a modem router that has a function called "print server" and I decided to use this feature and print via wifi. I put it to the top, but with a problem. When I print something, for example, test page, instead of printing a page, it will print 'test page' on 3 pages (something like partial pages and the last = third page is printed without understanding) and then it freezes (the printer display says 'printing' and I have to cancel the job, otherwise it crashes and I have to reconnect it). I have this problem, not only in the test page but at least IE, office, PDF files. This concerns mainly the Wifi, since if I connect the printer directly to the PC or laptop via usb, it works quite well. also I tried printing with different laptops with wifi but no go. Here is more information that I have forget:

  (1) router is WPA - PSK encryption type.

  (2) there is no mac filtering or hide SSID passes.

  (3) a laptop and an iPad is connected to the router via wifi and a PC which is connected by a LAN cable.

  (4) the IP address of the printer, this is the same as the IP for the router settings page. (192.168.0.1)

  (5) I can't open the printer's internal web page by entering the IP address of the printer in the browser, since it is the same as the IP address of the router.

  (6) firewall on my computer (windows 7 32-bit) laptop is turned off and I don't use any anti-virus.

  (7) I tried PHYSICIAN analysis AND HP Print, but he says that the printer is OK.

  Thank you

  Leland

  EDIT: after studying for hours, I finally managed to get rid of the problem of gel. now, there is just one problem of this partial impression that happens by chance on wifi! I mean, it happens sometimes and sometimes not.

  any suggestions? I would really appreciate it

  The background is that this printer has no way to connect more than a straight USB connection.   In order to make wireless you have a device that will give him a network IP address.  The printer itself is unable to do this.

  The only way to get this printer on a network is to buy a SEPARATE USB print server.   Or, buy a router separate, as I said, that has a USB connection on the back which will have supported printers.

  You can not connect as you wish as it stands right now.

  However, call your ISP and have them set up IF their gateway device has a USB connection and really can support a printer.  That's their problem.

• Satellite L645 - problem with Internet connectivity Wireless 'limited access '.

  Hi all

  I recently bought a Satellite L645 laptop, however, there is a big problem. Whenever I connect to a wireless network, it will connect in a minute, he removes the connections and said "limited access", he could return by being connected but then back with limited access, so. However, when the laptop is connected to an ethernet internet cable works. I checked and the driver is updated, it is a defective material? software? is there something I can do? Help, please...

  Thank you.

  Hello

  Here the material is ok.
  You must disable for the Wlan to save energy.
  You can do it in 7 QL power management.
  In addition, go to-WLan card-> properties > Device Manager
  You will find a named tab to save energy. You should uncheck the option here that allows the computer turn off the Wlan device to save energy.

• Problems with A660 - 18 wireless

  Hi can someone help. I spent 1.5 hours on the phone to sky (my ISP) last night that my internet is so slow. They went through everything (reset the router, move, new filters etc) telling me that I should have 2.5mbs (I know, it's slow, but it's heaven). I did some tests telling me it was between 0.17 mbs and 1.7mbs. More I thought last night over I thought it might be the laptop. A number of things that made me think of this were: -.
  (a) if I use the laptop on battery (not network) he gets 55% of battery I lose internet connection completely.
  (b) if I use the laptop on the floor in my house (the router being downstairs) I can't connect to the internet at all, even if I'm sitting at the laptop next to a pc that is connected to the same router and work very well.
  I'm not really good with computers so it could be something simple that I'm missing. Any help would be very useful, Chris

  Try the new Wireless LAN drivers. They can be found here:
  http://APS2.toshiba-tro.de/WLAN/index.php?page=downloads