Problem writing to the configuration file (.ini)

Similar Questions

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• I run windows xp on HP Pavilion 750, in the past, I have not had a problem writing to the pictures from my computer to a disc

  I run windows xp on HP Pavilion 750, in the past, I have not had a problem writing to the photos from my computer on disc.

  It now written up so I get a message cannot keep any body can help please.

  original title: problem writing Photos...

  I'm sorry, but I don't have a solution for you.  You can check the Device Manager (start > run > devmgmt.msc > OK) to see if there are warnings next to your CD burner.  If there is a caution icon, double-click the entry and see what it says under "device status".

  I don't know how you use picture & Fax Viewer to burn a CD.  The usual method, except if you have 3rd party CD burning software, is to use Windows Explorer.  This is what Windows XP Help & Support has to say on this topic:

  To copy files and folders to a CD

  1. Insert a blank, writable CD into the CD burner.
  2. Open my computer.
  3. Click the files or folders to copy to the CD. To select multiple files, hold down the CTRL key while you click the files you want. Then, under file and folder tasks, click copy this file, copy this folder, or copy the selected items.

     If the files are located in my pictures, under management of images, click copy to CD or copy all items to a CDand go to step 5.

  4. In the dialog box copy items , click the CD player record, and then click copy.
  5. In my computer, double-click the CD burner. Windows displays a temporary area where the files are held before they are copied to the CD. Verify that the files and folders you want to copy to the CD appear under files ready to be written on the CD.
  6. Under CD writing tasks, click write these files to CD. Windows displays the Assistant burn a CD. Follow the instructions in the wizard.

  Notes

  • To open my computer, click Startand then click my computer.
  • Do not copy more files to the CD that it will hold. Standard CD hold up to 650 megabytes (MB). Large capacity CD contain up to 850 MB.
  • Don't forget that you have enough disk space on your hard disk to store the temporary files that are created during the CD writing process. For a standard CD, Windows reserves up to 700 MB of available disk space. For a high-capacity CD, Windows reserves up to 1 gigabyte (GB) of the available free space.
  • After you copy files or folders to the CD, it is useful to view the CD to verify that the files are copied.

• Impossible to the configuration file of the access to the error in XP mode: "is client\users\administrator is not accessible.

  Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer

  I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode.  Configure XP mode and when it asked for a password that I left it empty and press to enter.  When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.

  I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode.  I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer.  Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.

  There are two user fence: virtual XP-admin and virtual user of XP-88950xp.

  The only program I installed XP mode is this one.

  Thank you.

  Hugh Humphreys

  Hi Hugh Humphreys,

  Leave the password empty section and see if the XPMUSER can be accessed.

  Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:

  (a) Firstly, disable the integration features.

  (b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)

  (c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.

  (d) log in Windows by using the administrator account and the password.

  Note: The password is empty by default unless you already set a password.

  (e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.

  (f) choose the user you want to change and click 'reset password'. Set a new password.

  (g) click on "Advanced" tab, click on the button "Advanced".

  (h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".

  (i) check the "password never expires". Click on 'OK'.

  (j) then exit the settings and restart Windows XP Mode to normal mode.

  Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  (a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.

  (b) set a password for your current user.

  (c) click on tools on Windows Virtual PC, choose enable integration features.

  i. type the password, check the box "Remember my credentials" and click OK to open a session.

  II. after joining the domain, logon in XP mode with the local administrator account.

  Reference: http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/45f3f241-3d0a-43f7-8baf-c64ab3a8a76d/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  If this does not work, post your request in the TechNet forums to get help.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

• Dreamweaver CS5 won't start, can't find the configuration file

  Dreamweaver can not locate the resource file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application.

  Dreamweaver CS5 does not start because of the above error message.

  Found the file configuration, but on my roaming profile on the server, not on the C drive.

  Note that I have installed Dreamweaver on the second partition of the hard drive, not on C drive due to lack of space. Other software Adobe CS5 work well, like Photoshop and InDesign.

  I tried to delete the Configuration file (after saving), I read on this forum that it should be automatically recreated, but without success. Tried to copy the Configuration (in fact the entire Adobe folder) folder for the user profile on the C drive, but without success.

  No previous version of Dreamweaver has been installed on this PC. However, I have used earlier versions on different computers and there are in the Adobe folder on my roaming profile of CS4 and CS6 tracks.

  Could you please tell?

  I had searched the forum before posting, but could not find a relevant solution.

  Changed the registry as suggested by your link, but without success.

  Re-installed Dreamweaver CS5 and it worked. Detective Conan.

  Thank you for your quick response, I appreciate it a lot. I need to mark it as useful, although the problem has been solved by another method?

• AIP-50055: error in the configuration file

  Hi all
  
  I defined a 850 doc in EDI X 12 on the Internet and I have defined an internal delivery channel to choose the file to a folder. After the deployment of the Setup, I get the error below and the file does not get picked up from this location.
  
  2009.02.05 to 05:36:46:017: B2BStarter wire: B2B - Error (ERROR) -: AIP-50055: error in the configuration file
  at oracle.tip.adapter.b2b.init.Repository.b2bEngineConfiguration(Repository.java:770)
  at oracle.tip.adapter.b2b.init.Repository.initialize(Repository.java:711)
  at oracle.tip.adapter.b2b.init.B2BServer.readRepository(B2BServer.java:451)
  at oracle.tip.adapter.b2b.init.B2BServer.initialize(B2BServer.java:183)
  at oracle.tip.adapter.b2b.init.B2BStarter.startB2B(B2BStarter.java:298)
  at oracle.tip.adapter.b2b.init.B2BStarter.run(B2BStarter.java:144)
  at java.lang.Thread.run(Thread.java:534)
  
  I even tried to make the configuration and restart the server. But still, it did not help.
  
  Please help me solve this problem.
  
  Kind regards
  Khli

  Hi khli,.

  It seems that the WalletLocation property is not available in tip.properties. Please provide it as necessary when the server starts

  Kind regards
  Dheeraj

• Failed to read the configuration file. New installation on windows 7

  I just downloaded and installed firefox on my windows 7. No error on installation. When I try to launch Firefox I get this dialog box. Configuration - the configuration file cannot be read. Please contact your system

  administrator.

  Note that you must delete the Firefox program folder to do a clean reinstall to remove the file that is trying to access the mozilla.cfg file which probably does not exist.

• 25 Firefox is unable to read the configuration file on new install

  I try to install Firefox 25.0 on a XP - SP3 machine and receive the error "failed to read the Configuration file. Please contact your system administrator. I use a file to mozilla.cfg that I created and that you have applied to previous versions. The mozillia.cfg file has entries Pref lock, which are formatted as follows:

  lockPref ("Network.protocol - handler.external.shell", false);

  I have read discussions on various forums and the recommended fix seems to be a "clean reinstall. This machine has never installed Firefox, so a clean reinstall is not an option.

  As noted by one side this version of Firefox will be not to read the config on any OS file I tried Win7 or XP, I did a clean reinstall on both of these machines with the same results.

  I appreciate your help with this.

  If it helps, here is the content of my mozilla.cfg and local - settings.js.

  C:\Program Files\Mozilla Firefox\mozilla.cfg

  //
  
  lockPref("security.enable_ssl3", true);
  lockPref("security.default_personal_cert", "Ask Every Time");
  lockPref("network.protocol-handler.external.shell", false);
  lockPref("plugin.disable_full_page_plugin_for_types", "PDF, FDF, XFDF, LSL, LSO, LSS, IQY, RQY, XLK, XLS, XLT, POT PPS, PPT, DOS, DOT, WKS, BAT, PS, EPS, WCH, WCM, WBI, WB3, RTF");
  lockPref("browser.formfill.enable", false);
  lockPref("signon.autofillForms", false);
  lockPref("signon.rememberSignons", false);
  lockPref("dom.disable_window_open_feature.status", true);
  lockPref("dom.disable_window_move_resize", true);
  lockPref("security.enable_tls", true);
  lockPref("dom.disable_window_flip", true);
  lockPref("dom.event.contextmenu.enabled", false);
  lockPref("dom.disable_window_status_change", true);
  lockPref("dom.disable_window_open_feature.status", true);
  lockPref("browser.startup.homepage", "http://intentionally removed");
  lockPref("app.update.enable", false);
  lockPref("extensions.update.enabled", false);
  lockPref("browser.search.update", false);

  C:\Program Files\Mozilla Firefox\defaults\pref\local-settings.js

  pref("general.config.obscure_value", 0);
  pref("general.config.filename", "mozilla.cfg");
  

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt

  What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt.

  I always get this message in a long horizontal area on my desk top once I restart and turn on my computer.

  Thank you

  "Privoxy" is a 3rd party is no program not part of Windows XP.  You can go to
  Panel-> Add/Remove programs
  and remove this program.  If you still think that you need this program, try reinstalling it on Sourceforge
     <>http://sourceforge.NET/projects/ijbswa >

  HTH,
  JW

• Check the size of the configuration file

  Hello all,.

  I'm about to pass a PIX 525 of 5.3 to 6.3 software and I'm working my way through the release notes.

  I would check and see the size of my config file on a slice of PIX 525 in failover mode.

  We have a little more than 1500 lines in the configuration file, and I'm curious to know how this configuration is.

  Does anyone know how to do this?

  Thanks in advance.

  concerning

  Amanda

  Is the command that you want to take a look at 'sh flashfs' and here is what the output you get:

  For a file system of version 2 (6.0 and 6.2)

  folder 0: pix image

  file 1: config

  file 2: certificate information

  file 3: image of pdm

  folder 4: file system folder

  For a file system of version 3 (6.3)

  folder 0: pix image

  file 1: config

  file 2: certificate information

  file 3: image of pdm

  folder 4: crashdump

  folder 5: recording of file system

  Let me know if you have any other questions.

  Scott

• change the value of the location attribute in db jca file with the configuration file

  Hello

  How can I change the value of attribute of 'place' in the jca adapter db file by using the configuration level if possible?

  I have the database map file where the first two lines are:

  < name of the adapter-config = "getParty" = 'Database adapter' adapter wsdlLocation = "getParty.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/CRP1"UIConnectionName ="crp1_apps"adapterRef =" "/ >

  ...

  I need to replace the configuration file

  EIS/DB/CRP1

  with

  EIS/DB/DEV

  but this isn't the case. I think that I am not referencing correctly but I don't know how he is correct, that I couldn't find examples for composites and wsdl content, JCA file.

  Please share the idea.

  Thank you

  Anatoliy

  Anatolly salvation,

  You can assign a new value to the property of JCA by using either the Ombudsman as BPEL.

  Pick click entitled value option and add the right attribute to the property JCA jca.db.DataSourceName.

  In BPEL will zoom click the invoke for the DB adapter, go to the Properties tab and add the right attribute to the property JCA jca.db.DataSourceName.

  (edit)

  If you want to use a configuration file to set the value, I suggest a BPEL property, the value can be replaced by using a configuration file and can be assigned to the JCA property using ora: getPreference ("prefName as string");

  When you use a mediator does not have a preference, and you can use a placeholder that you change when you compile the SCA composite. With ANT in combination with hudson, you can easily replace the value (hard) by the environment.

  See you soon,.

  Robert van Molken

  Specialist of the integration of Oracle

  Post edited by: robertvm

• Error reading the configuration file

  I install the Adobe Access 4.0 trial license server and when I run the g - r on the Tomcat installation dir \licenseserver Validator.bat I get a message "error reading configuration file. Here's the log dump:

  [] 2012-12-20 22:46:32, 176 INFO [[Partition (flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] class loader of partition creation «flashaccessserver"with «[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]» libraries

  [2012-12-20 22:46:32, ERROR 582 [. com.adobe.flashaccess.server.license.tools.Validator [Partition (flashaccessserver)]] could not validate the deployment tenant "flashaccessserver/sampletenant".

  com.adobe.flashaccess.server.common.configuration.ConfigurationException: error reading the configuration file

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)

  to com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl. < init > (TenantConfigurationImpl.java:110)

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)

  at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment (Validator.j ava: 255)

  to com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment (Validato r.java:283)

  at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment (Validator.j ava: 301)

  at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)

  at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)

  Caused by: org.apache.commons.configuration.ConfigurationException: could not load the configuration

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)

  ... 7 more

  Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; HVAC-complex - type. 2.4.b: the content of the element "KeyServer" is not over. A the "{"http://licenseserver.flashaccess.adobe.com/tenant": file"}' should. "

  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException (exercise wn Source)

  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$ XSIErrorReporter.reportErro (Unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT (unknown Source) type

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType (KNU nown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent (exercise wn Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement (KNU nown Source)

  to com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$ FragmentContentDri ver.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument (exercise wn Source)

  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse (unknown Source)

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)

  ... 9 more

  I use a relative path to my .pfx file to the transportServerCredential and the licenseServerCredential in the flashaccess - tenant.xml and my password was encoded using the Scrambler.bat.

  Also, when I check using the configuration http://< LicenseServer >: 8080/flashaccessserver/flashaccess/license/v2 I get the message "license server is configured properly."

  Any ideas why the Validator.bat cannot read the configuration file?

  Neil and may,

  I also used the evaluation of access version 4.0, and I got stuck in the same place you did.  I had two main symptoms.

  (1) the validator was not with the same error that you are experiencing.

  (2) later, while trying to acquire a license for playing packaged content, encrypted, the license acquisition failed, and the cause of the original error has also pointed out the Key Server parameter in flashaccess - tenant.xml.

  According to the documentation, the certificate server key (and in fact the key server itself) are supposed to will be necessary only when a policy calls for remote key service to clients of iOS.  But, I took a chance and added the .pem file in the sampletenants directory and made him the flashaccess - tenant.xml as follows:

  Configuration | Tenant | Certificates | KeyServer. File | path =

  The result was a successful validation of the configuration and the successful license acquisition and reading - and the key server is not even in the course of execution.  Apparently with 4.0 certificate is part of the minimum for the scanner configuration, even if the documentation says something quite different.

  Good luck, hope this helps.

  Scott

• CMDTUX_CAT:754: ERROR: error parsing of the configuration files

  Hi Tuxedo Experts,
  I have compiled and related sample code Tuxedo client and server (simpapp). According to the README, the next steps is running y tmboot command. It starts smoking simpserv Server? If this is not the case, how can I start that?
  
  In addition, when I ran this 'tmboot-y' command, I get the error:
  ===========================================
  $ tmboot y
  
  tmboot: internal error: CMDTUX_CAT:754: ERROR: error parsing of the configuration files
  
  
  
  tmboot: internal error: CMDTUX_CAT:1360: ERROR: configuration file not found
  ===========================================
  
  Could you please help me with that.
  
  Thank you and best regards,
  Ahsan Asghar

  Hey Ahsan,

  Well, the error message says tmboot cannot find TUXCONFIG. If the TUXCONFIG environment variable has not been set or the tmloadcf command has not completed successfully to create TUXCONFIG. Whenever you login, you will need to run the tux.env file to set all necessary environment variables. If tmloadcf finishes successfully, it should have printed one or more of the error messages.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• The configuration files are used to create this cache server?

  I start a cache server by running the $COHERENCE_HOME/bin/cache-server.sh file. But I don't how it is configured.
  The configuration files are used to create this cache server? How do I know?
  I check the contents of the cache-.sh file.
  In my view, the config.xml file - cache-coherence, consistency-pof - config.xml file and leader tangosol-coherence are used, no?

  After the start of a cache server, view the output carefully and you will find the configuration files are used. For example, the configuration files are displayed in bold background in the following text:

  F:\coherence\coherence\bin>cache-server.cmd
  java version "1.6.0_16"
  Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
  Java HotSpot(TM) Server VM (build 14.2-b01, mixed mode)
  
  2009-11-30 22:46:06.468/1.547 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
  ational configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-co*
  *herence.xml"*
  2009-11-30 22:46:06.484/1.563 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
  ational overrides from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-cohere*
  *nce-override-dev.xml"*
  2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
  iguration override "/tangosol-coherence-override.xml" is not specified
  2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
  iguration override "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5/459
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-11-30 22:46:07.468/2.547 Oracle Coherence GE 3.5/459  (thread=main, member=n/a): Loaded c
  ache configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *coherence-cach*
  *e-config.xml"*
  2009-11-30 22:46:08.515/3.594 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Service
   Cluster joined the cluster with senior service member n/a
  2009-11-30 22:46:11.765/6.844 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Creat
  ed a new cluster "cluster:0xD7DB" with Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.1
  68.0.8:8088, MachineId=26632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceSe
  rver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A800080000012548585
  C6D68081F98
  2009-11-30 22:46:11.796/6.875 Oracle Coherence GE 3.5/459  (thread=Invocation:Management, member
  =1): Service Management joined the cluster with senior service member 1
  2009-11-30 22:46:12.515/7.594 Oracle Coherence GE 3.5/459  (thread=DistributedCache, member=1):
  Service DistributedCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.593/7.672 Oracle Coherence GE 3.5/459  (thread=ReplicatedCache, member=1): S
  ervice ReplicatedCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.609/7.688 Oracle Coherence GE 3.5/459  (thread=OptimisticCache, member=1): S
  ervice OptimisticCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=Invocation:InvocationService,
   member=1): Service InvocationService joined the cluster with senior service member 1
  2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=main, member=1): Started De
  faultCacheServer...
  
  SafeCluster: Name=cluster:0xD7DB
  
  Group{Address=224.3.5.0, Port=35459, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=266
  32, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
    OldestMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=2
  6632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=1, BitSetCount=2
      Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=26632, Locat
  ion=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.0.8:8088}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMembe
  rId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    DistributedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCo
  unt=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
    ReplicatedCache{Name=ReplicatedCache, State=(SERVICE_STARTED), Id=3, Version=3.0, OldestMemberId=1
  }
    Optimistic{Name=OptimisticCache, State=(SERVICE_STARTED), Id=4, Version=3.0, OldestMemberId=1}
    InvocationService{Name=InvocationService, State=(SERVICE_STARTED), Id=5, Version=3.1, OldestMember
  Id=1}
    )