Problema internetul cu deschiderea computerului imi da eroare, if trebuie sa-l manual Introduction.

Similar Questions

• Pavilion dv2500 loading problems.

  I have a HP Pavilion dv2500 Notebook PC and I just bought a new battery about two weeks ago. My laptop is less than two years and it took me about six months to get a new battery for my laptop. In this period, I use my laptop on my power adapter only with no problem. Now that I have a new battery, I noticed that my laptop has problems of load. It will charge the battery but only if the ca is in a certain position and nothing 'bumps' in there. Six months ago, I took my laptop to my college to check the life expectancy of the AC and my college said it was perfectly fine. I did yet another health check, but I wonder what could cause this problem. The battery again, and this problem just started after I started using a battery on my laptop. I think that my AC is about a year, too.

  If I take the battery and the only laptop running on the AC, it won't work unless there again, it is in a certain position. And again, this battery is brand new and before she would charge perfectly fine. My power adapter could be dying or will I have another hardware problem? Because it's the only problem I've had.

  http://h10032.www1.HP.com/CTG/manual/c01295820.PDF

  If you have not tried with a different AC adapter, I'll try to see if I could borrow one and try that first.  If it still does the same thing, then I would say it is the seizure of power on the Board of Directors.  I don't know your whole model number but the link is for the service and maintenance manual for a 2500.  It will show the procedure to disassemble and fixing it.  Being to shake autour decision-making, I would say that it's a bad shot.  The link I posted in the previous post is for the usb card.  I just showed you that if you can see how the decision-making was there.  It just buy the plug with cable, and not to the usb Board.

• Works without any problem

  This post isn't a question, but a commendation to Apple for their latest OS, El Capitan. I waited until this week, in order to download the new OS, as I had read about all of the many problems with the new OS. I own a MacBook Pro w/retina, mid March 2014 w / 1 TB of storage. When I upgraded my memory of 240 GB to 1 TB, by buying a new MacBook, I've had problems with it. The system would frequently be freeze-up whenever I ran several windows at the same time with MS Word or PowerPoint, Sketchup Pro, software Adobe Pro (several programs), and even the Firefox and Safari browsers. This would occur several times a day or more. I took my system in Apple in which their diagnosis could not make affirmative about problems with the equipment. They even cleaned my system and reinstalled manually some pieces of software. They were / are preparing to keep my computer for a week so that understand the problems. I have one is not a computer expert but I recon that because I run several sophisticated design and medical programs, some are bound to create problems with an operating system, especially the large memory using programs (many of my programs are 5 GB and more). Yet and after the installation of the new operating system, my computer did not freeze once and it works much more quickly than before. It's as if my system has acquired the stability of the grater. In any case, I'm glad that I waited a few months before downloading the new OS, but I'm glad I downloaded it now. My life is a lot easier now that my Apple is running up to my level of expectation, especially given Apple's steep prices for their products.

  This is a user forum.  Apple is not read something here.  Send your comments if you want to tell them how much you love El Capitan.

  http://www.Apple.com/feedback

• I have update problems that interfere with the operation of the Overdrive Media Console software compared to WMA files.

  Windows is completely up to date through the date of this post.

  OverDrive Media Console
  -MP3 download and play perfectly
  -Download error 0xC00D2751 for all WMA files (~ 80% of audio book from the library files are downloadable in this format), informing me to contact Microsoft.

  Solution on the Microsoft website:
  -http://support.microsoft.com/kb/913800
  -The patch will not install.

  Journal of problem with the installation of the hotfix:

  [KB913800.log]
  0.031: ================================================================================
  0.031: 2009/11/16 (local) 18:35:17.508
  0.031: d:\9b8cb172a0ae06ea215f6af0\update\update.exe (version 6.2.29.0)
  0.046: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  0.046: hotfix started with following command line:
  0.078: CreateUserInterface: GetProcAddress for DefineInstallCustomUI failed: 0x7f
  0,109: SYSTEM\WPA\MediaCenter\Installed is equal to the Value specified
  0,109: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,109: second Condition in Prereq.CheckRegistry.Section failed
  0,109: Check condition for 1 line of prerequisite returned FALSE
  0,109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,109: KB913800 Setup has encountered an error: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  0,109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,109: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  20.343: message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  20.343: user input: OK
  20.343: Update.exe extended error code = 0xf0f4
  20.343: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Cannot find another solution on the Microsoft site.

  Back emails with Microsoft technical support has failed to a solution.  Beyond to download the fix will not download, they have no extra information for me.

  whitepawn23,
  Are you having to provide updates through Windows Update?  If so, I suggest that you perform a clean boot , and then run Windows update.  If you continue to have a problem with a certain update you need to download and install it manually.  Alternatively, you can consider removing the Overdrive program and new test.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Instalation 900 SPA

  Hi all
  I am about to install a new VOIP system in our offices.  We are only a small office, but reasonably busy and I only need three to five extensions.  I already have the material and I'm reasonably confident (famous last words!) by installing the system with a SIP line and connected to a normal telephone line for the downturn.  I'm NOT sure about a field.  Prime material

  SPA9000
  SPA3102
  962/942 SPA phones

  OK now my desktop system consists of a server with SBS2003 with NIC TWO one for LAN and WAN cards.  Workstations and other elements are connected by ethernet to a D Link switch which is connected to the NIC1 and the NIC 2 connects to a telephone line Draytek router/ADSL broadband.  Internet access is of course provided to workstations using DHCP.  Everything works well at the present time.

  Now that I do not understand is the SPA 9000 connectivity and the SPA3102 which has an FXO port to the telephone line.  As I don't have only one telephone line how to connect theat line to the router AND the SPA3102.

  I hope that explains my question

  Thanks for any help

  You will connect the WAN port on the SPA9000 to the switch and then together "Network Interface Proxy" WAN under the label to join automatically, in which case your SBS2003 has no problem handling of multicast SIP, IP of SPA phones. You must manually register the SPA3102 to the SPA9000, you set a proxy which is the IP address of the SPA9000, you can verify that proxy address by clicking on one of the IP phones that automatically, then you put a User ID user defined. You can test if it works by calling locally and User ID on one of the IP phones.

• problem with LifeCam nx-6000 image

  Camera show the wrong colors, image looks like psychedelic

  Hi tmd16,

  Thank you for your message.

  Looks like you may have a problem with the driver for the camera, try using the section "to manually update drivers" of this article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  What software you use to access the camera?

  Have you tried another software?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems pictures copies of Flash memory card and USB drive under Vista 64 files

  Hi, when I insert a flash memory card (SanDisk 8 GB SDHC or SanDisk 2 GB Compact Flash) either by inserting the card into a card reader, AutoPlay comes on but the image transfer stops after a few images have been copied to any program (Windows, Picasa, etc.). I chose to copy the files. Same experience when I connect the camera with the memory card in the camera using the USB cable to the PC. I tried to re - format camera memory cards, but it has no effect.
  Also, I feel the same when I try to copy from a USB flash drive (the drive is basic, not a U3 key).
  I have a HP Pavilion m9400t Elite desktop running Vista Home Premium 64-bit. I own this desktop computer for a year and I've always had this problem. I have no problem using these flash memory cards and a USB drive on my old XP PC or an Apple Mac Book. For what I can tell, my Vista desktop is set for automatic windows and updates from HP. Everything about the plan of updating drivers, etc., which would solve this problem would be appreciated.
  Thank you
  Srini

  Hi Srini,

  one) that you get specific error messages when images are arrested to copy?

  (b) what is the file format of the pictures\files that are not copied? What images are copied with success?

  To narrow the problem, please follow the steps mentioned below:

  O copy the pictures manually on the flash memory card Office.

  O connect the flash memory card\ camera to the back of the computer (for a different USB (port universal serial bus) and try to copy the pictures\files.)

  O check if the photos are in double version:

  Windows detects your newest pictures and doesn't matter the duplicate versions of the old photos that you've already copied to your computer

   

  He may want to know:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• MQTT - TestMqtt - problem

  I know, some months agao that I tested the Mqtt library and TestMqtt Aoo cascades community samples

  Now tried again and running into problems

  Library of MQTT

  Error reported: MqttClientImpl.h not found

  copied from/private to / src

  then could build the library project

  TestMqtt

  problems reported that assets/lib not found

  created the assets/lib folder

  then runs into problems where libMqtt.so is not copied in assets/lib

  copied manually, but this does not work hgelp

  still a few errors of build process

  make[1]: Leaving directory `/daten/bb_workspaces/cascades-api-10-1/TestMqtt/translations'
  make -C ./arm -f Makefile debug
  make[1]: Entering directory `/daten/bb_workspaces/cascades-api-10-1/TestMqtt/arm'
  make -f Makefile.Debug
  make[2]: Entering directory `/daten/bb_workspaces/cascades-api-10-1/TestMqtt/arm'
  make[2]: cmd: Command not found
  cmd /c copy /y ..\..\Mqtt\Device-Debug\libMqtt.so ..\assets\lib
  make[2]: *** [o.le-v7-g/TestMqtt] Error 127
  make[2]: Leaving directory `/daten/bb_workspaces/cascades-api-10-1/TestMqtt/arm'
  make[1]: Leaving directory `/daten/bb_workspaces/cascades-api-10-1/TestMqtt/arm'
  make[1]: *** [debug] Error 2
  make: *** [Device-Debug] Error 2
  

  any ideas?

  Hi ΕΚΚΕ,

  I see what happened. With the help of this new regime I solve the reference to the libMqtt.so library in the Mqtt project at the time where I wrap the bar file. There are now 2 executable files in the manifest of BAR, and I had managed to incorrectly identify the entry point of the application as the executable libMqtt.so rather than the TestMqtt executable.

  The attached patch (diff patch2.zip) file provides additional changes to the file bar - descriptor.xml to correct this problem. Apply to the file bar - descriptor.xml who has had my original patch applied.

  I tested on a Windows device (to work) and it launches the app TestMqtt correctly, but it should work unchanged on a Mac since it is purely a change of file bar - descriptor.xml.

  I would like to know how you get on with on a Mac, and if it's sunny I'll push the update on GitHub.

  See you soon,.

  John

• Cisco SPA with problem of DHCP Options 66

  Dear all,

  I have a problem of my phone Cisco SPA for the autodeploiement.

  If I manually enter the page configuration and paste "[- pwd - password user uid] http:///dms/def/spa$PSN.cfg" in the profile rule. Everything works perfectly.

  However, we would like to do in the provision of zero touch, I add the "[- pwd - password user uid] http:///dms/def/spa$PSN.cfg"DHCP Options 66. " The SPA phone seems impossible to get the 66 Options parameter. It shows that "/ spa$ PSN.cfg" in the rule of profiles.

  I'm sure that the DHCP server works perfectly.

  Can anyone help on this?

  Kind regards

  Desmond

  You cannot use the custom during initial deployment (zero touch) password. DHCP can be used to deliver key to the device in this way.

  Ok. What are the options you have?

  You my use of the configuration file, compiled with SPC type -target option. It encrypt the file by using the password from each device Mac so you need no password given to the device - device can calculate the password required their Mac. It provides just basic security level - insensitive user, like me, know the algorithm used for password generation so that it can calculate the password and decrypt the file.

  You can use HTTPS with mutual certificate authentication to deliver XML or SPC configuration form. All phones have the unique client certificate, then you can be sure that the request has been issued by the unit. It offers a high level of security.

  There are also a few other possibilities, but disclosed so that information on the goal you want to hit, so I can't list.

  Just note that DHCP will meet anyone, in addition, the answer may broadcast (therefore handed to anyone, even without prior request). If you deliver critical data via DHCP, you can consider them publicly available. Security resulting is without security.

• Problem with the update in Microsoft money 2005 UK currency

  Having used MONEY 2005 UK for several years, with Sterling accounts and the Euro appearing in this document, with Total balance of the account and the final balance of each account that is displayed in euros, it's still works fine, no problem! but the problem is that before a couple of years, there is an update manually or automatically in the exchange rate Euro / Sterling. but it is currently unavailable, and the exchange rate remains as a very old... So I need to know how to do the updates of this exchange rate in my MONEY 2005 UK on my laptop running Windows 7 Home Premium Service Pack 1... Thanks in advance for your answer :-)

  Hello

  For questions of Microsoft Money you please directly post the Forum money from Microsoft.

  http://social.Microsoft.com/forums/en-us/home?Forum=money

  See you soon.

• Problems of Smartphones blackBerry with Facebook Places

  Hello world

  Having problems with my Blackberry Curve 8520 to update Facebook places - read the manual online and it explains how to turn on the GPS, but if I try, I don't have the option to turn it on... Any advice?

  Found the answer.

• Problem of services component the blackBerry Smartphones

  4 weeks old BB TOrch -.

  Often, I am unable to hear (services appeal is suspended high-microphone and speaker not working, but appeal is perceived) when I call someone on my mobile if I remove my battery and restart my laptop, it works fine.

  Kindly help

  Charles

  296 is an old OS and had some problems call. I would upgrade to a newer version.

  Manual device OS upgrade instructions:

  1. start by searching for your operator and the system operating file that you want to use.

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  2. make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/

  3. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

  5. This step is not necessary unless there is a problem on the next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then proceed to step 6

  6 remove the internet connection for PC and reboot the PC.

  7. plug the BlackBerry and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file was in.

  8. If you did step 5, restoration of the back upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339

  Take advantage of the new operating system.

• Home office 64 bit installation problem

  I have a 64-bit computer and downloaded 64-bit desktop at home, but it won't let me make it work because I have a 32-bit version of 2010 Professional on my computer.  I can't uninstall the 32-bit professional, but it does not show to the memory

  32 and 64-bit versions of Office cannot coexist, you must first uninstall the 32-bit version.

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  If the step above does not resolve the problem, uninstall Office by removing all the registry keys for this office manually check the item below:

  Note: Read the disclaimer mentioned in this article before you perform the troubleshooting steps.

  Instead of office 12 files looking for records Office 14.

  http://support.Microsoft.com/kb/928218

  Try to reinstall Office.

• Problem with download custom to CSV in APEX

  Apex: Apex 4.2

  Oracle 11g

  Listener of the apex.

  Hello I have a general problem with export to CSV using a custom process of pl/sql manual tabular.

  I can't use the native 'Download' option because it will not be exported my textbox objects to CSV

  So I have a custom download process that calls another page which has a prior to the process of the header as follows:

  HI INAMIK

  I think you need to update your code to place your fields exported with '. '.

  For column headings

  htp.prn('"Month/Year","Bonus","Actual Bonus Distributed","Date Distributed"'||chr(13));
  

  For data

  htp.prn('"' || x.MONTH_DATE|| '","' ||x.RVU_BONUS || '","' || x.SIX_MO_BONUS_ACT || '","' || x.BONUS_DIST_DTTM || '"' || chr(13));
  

  I hope that solves your problem

  Concerning

  Mahmoud

• Problems of updating Windows 8, the impossible to install the next update, KB3008273, kB3043812, KB3087039 and KB3078601

  I try to install the following update on a windows 8 system, KB3008273, kB3043812, KB3087039 and KB3078601.

  None of them will not properly install example KB3087039 will produce a 80073712 error message code that the other just off automatically install during the restart process.

  Does anyone has ideas to solve these problems?

  Kind regards

  Michel

  You can download the manual update of the catalogue and check if it installs. It is perhaps a corruption of backend.

  Open in IE/Edge:

  Catalog.Update.Microsoft.com