Problems after 10 Windows updated

Similar Questions

• Problems after installing Windows Update

  Original title: update Windows 7

  After Windows 7 automatically updated most of my desktop icons, favorite on my site had disappeared. My home page has been changed and I had to re-select-the. Anyone who met with what I had to do a system restore to do things to normal?

  Hello

  ·        Who was the Windows update that caused the problem?

  ·        You have reinstalled Windows Update once you have made the system restore?

  If you have not yet re-installed updates you can do so one by one, which will help you identify which update caused the problem. To check the updates are installed on your computer, follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Toshiba laptop problem after Gaming/Windows Update.__No solution on the web.

  Hello! I use a Toshiba laptop.

  I was playing a game and windows update popped up!

  He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.

  He will appear with the options
  'Safe Mode '.
  "Safe mode with network.
  "Safe mode with command prompt.
  "Last good known Configuration".
  "Start Windows normally".

  Whichever one I choose Windows XP logo appears, then crashes immediately, restart.

  So I tried to use "do not restart in case of shutdown"

  And the blue screen appears

  "stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).

  What is this error? I can't enter safe mode by the way!

  Thanks for your help.

  It's http://support.microsoft.com/kb/330182

  Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.

  If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.

  If you cannot start the computer, go to the next method to update the BIOS of the computer.

  For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:

  315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode
  314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

  Method 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.

  Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:

  1. If a driver is listed by name in the Stop error message, disable or remove that driver.
     • If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
     • If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
  2. If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
  3. Disable or remove drivers or services that you recently added.
  4. Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:
     http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)

  Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XP

  Method 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:

  1. Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
  2. Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
  3. Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.

     Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.

  4. Restart the computer.
  5. Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.

  Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.

  -----------------------------------------------------------------
  You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you!

• Get his problem after installing windows update on May 18, 2016

  Original title: updated 18/06/2016

  Has anyone else been having sound problems with the new batch of updates? I tried to download the drivers, but that didn't work and now I had to restore my system from the 18th daily. Any ideas on how to identify the update is the cause or what driver I may have missed? My computer is a Dell Latitude E5420, running 64-bit Windows 7 Prof. Any other information needed let me know. Thank you!

  Hello

  According to the description, I understand that you are facing the problem in your computer after Windows installation updated May 18, 2016.

  Yes, you can view the installed update so that you can identify the updates that are installed in May 18, 2016.

  Please follow the steps to see updates history in Windows 7:

  1. Click the Start button.

  2. Then select Control Panel > programs.

  3. And then, under programs and features.

  4. Select view installed updates.

  View update installed please check that the update installed in May 18, 2016 and uninstall the update one & check if the sound is working well and find the culprit, update.

  Please follow the methods described below to check if it helps:

  Method 1: perform a Clean boot and install Windows Update.

  If its a major update, I recommend you put the computer in a clean boot state and install it again in order to minimize interference that could cause this noise problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: uninstall and reinstall the Sound Driver.

  1. Press Windows + X key.
  2. Type devmgmt.msc (to open Device Manager)
  3. Find and select the audio driver.
  4. Right click on the driver.
  5. Uninstall the audio driver.

  Windows automatically installs the generic driver, otherwise I recommend you download & install audio driver on the website of the manufacturer to check if it helps.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• A startup problem after that Windows updates were installed and a disk read error occurred.

  I have a laptop Dell Inspiron 9400

  Windows Vista Home Premium SP2 operating systems

  Last night, he showed 16 updates are ready to be installed the automatic updates.

  So I clicked to install the updates as I always do.  I have everything done exactly the same thing.  When updates

  have been made install prompted me to restart now for the updates to take effect.  I have clickedd the button

  Restart now and he acted like he was going to reboot except is went to a blue screen with a message that says:

  A disk read error has occurred.

  Press Ctrl + Alt + Delete to restart

  I tried several times by pushing the Ctrl + alt + del keys to restart my system, it does not start...

  It shows the DELL screen with the loading bar, which is in charge of the left to the right.  It then displays

  Back to the blue screen with the same Message (an office read error)...

  I tried once or twice as the system restart in Mode safe mode (F8)...   This doesn't work anymore...

  He always flashes back to the BLUE SCREEN with the same message.

  Please, can someone tell me why this would happen as a result of the windows updates...?

  How this can be fixed or what should I do to get my back operational system?

  Thank you...

  Shelly928

  Hi Shelly928,

  You can read the following article and try the steps to solve the problem:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Hope this information is useful.

• lost touch pad dell drivers after installing Windows updates.

  Separated from this thread.

  I did the update and lost contact dell drivers pad and now I can't play all the games that I got on the computer. The previous update lost my sound card drivers.

  Hi Craig,.

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems after installing Windows updates.

  Any Windows specific update which is the origin of the problem or you face the problem after installing updates? This is to check if the updates you receive are associated with hard devices.

  To view your history of update, follow these steps:
  a. open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  b. press or click view update history.

  I wish that you install the Dell Web site touchpad drivers.

  You can refer to this article for the procedure: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1JW07

  In addition, if all of the updates are at the origin of the problems with the hardware on the PC, then I suggest you also update the drivers from the Dell Web site chipset.
  See the article:

  Download and update drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Qosmio G20-127: after that Windows update I can not see list fax and printer

  Description of the problem
  Model: Toshiba Qosmio G20-127
  Operating Sysytem: Microsoft Windows Media Center Edition

  After the restoration of BONE of restore DVD, I can see list Fax and printer. But after the Windows Update I can not see the list of fax and printer and cannot run the Wizard "add a printer".

  I just installed printers.

  It seems that it s a Microsoft Windows problem and it s not bound Toshiba laptops
  See this Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/823447/

• Fix for common problems associated with Windows Update repeatedly trying to solve the same problem

  When the machine running Windows Update on a Windows XP Professional (SP3 with IE8), the information for the download of the ActiveX bar does not appear. Tried to run the Fix for "Common problems with Windows Update" and it says "Windows Update components must be repaired. Difficulty-it short, reports of success, "Found Themes" saying "one or more components of Windows Update are configured incorrectly". However, still unable to download updates from the information bar does not appear. Repeating the difficulty happens with exactly the same problem i.e. reports etc. but no success still can not download the ActiveX on Windows Update since the information bar never shows up.

  At tried all the suggested solutions I can find for the reported similar problems such as checking the downloads ActiveX security settings, reset Internet Explorer settings, and even resetting Windows Update (Articlce ID 971058) components. Still no luck. Therefore, I am unable to manually check and download updates of Windows security.

  Otherwise my PC works well. Norton Internet Security is installed but did not prevent Windows Update to work on another PC I have. The information bar appears sometimes for other downloads, and it doesn't seem to be a problem on the Windows Update page.

  Please can you help. Thank you.

  No, I'm not not first uninstall IE8 (or IE7) before proceeding with the repair facility...

  Long history, technical, short version: do not uninstall IE8 (and/or IE7) before doing a repair installation (Windows XP only!) leaves the two Internet Explorer and Windows in a State of "confused" or "broken". Your only recourse now is a clean install of Windows (after backup your personal data).

  No, another repair facility won't solve the problem - even if you uninstall IE8 beforehand.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: So that registry cleaners can solve some problems (temporarily, at least), they are not & cannot fix what caused the problem. Compare to treat a broken leg with a stick and a couple of BandAids.

• 0 x 80244004 error after installing Windows Update Agent 7.6.7600.256

  After installing Windows Update Agent 7.6.7600.256 22/06/2012, I no longer see the Windows Update page when I run Windows xp and get this error 0 x 80244004, any response?

  Hello

  I saw an answer posted by (DevekY) and it's here:

  (Go to Advanced Setup ESET
  Web and email-> Web access and anti-phishing protection-> HTTP, HTTPS
  Installation scanner HTTPS-> HTTPS filtering mode

  Select "do not use HTTPS protocol control")

  I did this and solved my problem (have no more error 0 x 80244004)

  But what do you think? My computer will not be endangered?

  Thanks a lot for your time to help me.

• Network icon is missing from the notification area after the window updated

  I have some problems about the notification for the network and the volume icon!
  They are missing after the window updates!
  I tried to check the "Taskbar and Start Menu Properties' > 'Notification area', Volume and network are grey which I cannot check these boxes. Grateful if you could help me solve this problem!
  Thank you very much!

  Hi VisBo,

  Welcome to the windows vista forums.

  Please follow the steps below to resolve this issue:

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area.

  For the network icon, you can also do with the registry.

  NOTE:

  Please be careful while making changes to the registry, any undesirable changes can affect your operating system.

  1. click on start.

  2. in the start menu search bar type regedit, and then on enter.

  3 Please go to this location in the registry by expanding each location by clicking on the brand more on the left side.

  HKEY_CURRENT_USER\Software\Classes\LocalSettings\Software\
  Microsoft\CurrentVersion\TrayNotify

  4. remove the keys 'IconStreams' & 'PastIconsStream '.

  5. start the Task Manager by pressing ctrl + alt + delete at the same time.

  6. in the Task Manager right click on explorer.exe and kill the process.

  7. click on applications in the task manage, press new task and type explorer.exe, and then press ENTER.

  Explorer will now reboot and your icons should return.

  Alternatively, you can try to uninstall the most recent update that has caused the problem. You can uninstall an update by clicking on the icon of the program features in Control Panel. Select the update that caused the problem, and then uninstall it.

  You can also make a selection of updates to install by setting the windows updates to notify you before installing an update. To open this Panel, and then click windows updates, click settings.

  I hope this information is useful.

  Please let us know if you need assistance.

  Concerning
  Rehman - Microsoft Support

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• Windows vista and the problem with the window updates more computer or mouse freezes

  I have window vista system.

  Impossible to update versions of window

  mouse/computer frequent freezing problem

  have installed McAfee total protection

  Hi DilipAssar,

  ·         What happens when you try to run windows update?

  ·         You receive an error message/code?

  ·         Did you the latest changes on the computer?

  ·         How long have you been experiencing this problem?

  ·         What exactly is the computer or the mouse gel?

  Search for the error message for the updates that have failed to be updated.

  To check the update fails, follow the steps:

  Click Start > all programs > windows update > view update history

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Put the computer in a clean boot State before proceeding with the installation of windows update.

  Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Reference: http://windows.microsoft.com/en-US/windows-vista/Ways-to-improve-your-computers-performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• Please help! After a windows update last night, I put my laptop on and it won't let me type anything in browsers or anything else.instead a question mark appears when you type!

  need help please, after a windows update last night, I put my laptop this morning and it won't let me type anything to, type all.cant in my browser, research or of anything.when I try to type a? will appear instead and if I press any key again and a new tab opens again and again, if you continue to press any keys.i tried the system restore and it does not work.when I tried troubleshooting my devices on my laptop there is an error code 43. I uninstalled the usb controller option he gave and restarted the computer. I can see is no longer this error.i hope he relocated the itself.anti virus is very good if can anyone help?

  laptop = hp pavillion (BEATS AUDIO)
  OP = WINDOWS 7

  Hi Dan MJ.

  Yes, you can go ahead and try the steps in my previous post and check if this solves the problem.

  If these steps is not enough you can follow these methods and check if it works:

  Method 1: I you recommend to turn off the computer, unplug the power, restart the computer and reconnect the USB device. See if the device is detected.

  Method 2: You can run the hardware and devices Troubleshooter and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also see the following article for more information about the error Code 43:

  Code 43: Windows has stopped this device because it has reported problems

  http://TechNet.Microsoft.com/en-us/library/cc725873%28WS.10%29.aspx

  Let us know if that helps.

• No sound after installing Windows Update KB2962407 on Windows 8

  After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds.  Its returns if I uninstall this update.

  Hello

  Microsoft has confirmed that this problem occurs on some Windows 8 PC.  You can solve this problem by opting for Windows 8.1.

  Microsoft made in Windows Update KB2962407 to fix this problem.  While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .