Problems after editing a Subvi containing a group of dynamic user events

Similar Questions

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

  It will be useful.

• Problems using again after editing

  Once I edit a film strip, I go to Adobe Dynamic link and then "send again" half way what fact transcoding it close and restart my PC.

  I use Win 7, 3 GB of memory, a HARD drive of 1 TB to dedicate.

  There is no explanation or suggestion to stop this problem? or there is another way, so after editing I can burn the movie to a DVD and watch it on TV?

  Thank you very much

  Juan

  Export your timeline first media using a pre-configured with the good rate MPEG2-DVD.  Import into your project again.  If you have selected a DVD MPEG preset in the list of the SOUL, still do not have to re - encode.

  This method is more reliable than the use of dynamic links.

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• Bootloop after editing build.prop

  Hello Hello, y at - it could someone help me im in a bootloop because of my build.prop of edition. Is there anyone know how to solve this problem. ? My camera is Lenovo a3000-H and rooted it.

  Bootloop after editing build.prop comes because of not giving the correct permissions (rw-r-r). Now you can push the build.prop using adb sideload and then change its permissions using chmod. OR another way is that you Flash system.img using flash SP tools.

• Help! R40 problems after reformatting

  I meet a lot of problems after reformatting the laptop using the IBM recovery tool that comes with windows xp. After installing the drivers and xp

  -I can't use the trackpoint (mouse) and I see no mouse pointer on my screen

  -the system detects any USB or flash drive

  -Problems of drivers even after installing the latest drivers ethernet network card and mouse. When I tried to install the latest drivers, he said: "the i/o operation was abandoned because of a thread exit or an application request.

  -Tried to install xp sp3 but I said the installation did not complete.

  -Cant even repair windows xp because he says "systemroot system32/ntdll.dll c0000221 unknown hard error".

  Well just solved the DIF. The edition of the ibm recovery software xp sucks. What I did was deleted all the data on the hard drive and install xp using my cd. Then, everything works perfectly.

• Problem with remote access in a residential group

  Having a problem with desktop sharing remote within a group of home access.  I don't have problem of access to the desktop from the laptop, but for some reason I can't access the laptop from the desktop.  I tried everything I could think of.  Remote access is enabled on both PCs.  Help, please.  Thank you very much!

  Hello

   

  1. who is the operating system installed on the desktop and laptop computers?

  2. what happens when you try to access the laptop from the desktop? You receive an error message?

  3. What are troubleshooting you performed?

  I suggest you follow these methods and check.

  In a first step of troubleshooting, I suggest to run the troubleshooter to group on the source and the destination computer.

  Step 1: Open the troubleshooter group living

  If your computer has problems viewing computers or files shared in your collective housing, try to use the collective dwelling Troubleshooter to fix the problem

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Step 2: Share files and folders on a group of houses in the laptop using the method proposed below. Try to access from desktop and check.

  a. right click on the item you want to share, and then click share with.

  b. Select Home Group (read/write)

  c. this option share point with your entire Home Group and allows them to open, edit, or delete.

  Share files with someone: http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  Home Group: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

   

  I hope this helps!

• HTML Parsing error: Cannot edit the item container parent before the child element is closed (KB927917).

  Original title: HTML Parsing Error:

  When I go on this particular Web page, I can open the page, but with errors.  The error I get is: HTML Parsing Error: impossible to edit the item container parent before the child element is closed (KB927917).  Can someone out there help me solve this problem.  Also, it is the only Web page devoted to this particular site that does this.

  Hi Debbie9089,

  ·         What browser do you use?

  ·         Have you been able to access this site much earlier?

  If you use Internet Explorer, you can follow this link and check if the problem persists.

  Why do I get an "Operation aborted" error message when I visit a Web page in Internet Explorer?

  Hope the helps of information.

  Please post back and we do know.

• Toshiba laptop problem after Gaming/Windows Update.__No solution on the web.

  Hello! I use a Toshiba laptop.

  I was playing a game and windows update popped up!

  He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.

  He will appear with the options
  'Safe Mode '.
  "Safe mode with network.
  "Safe mode with command prompt.
  "Last good known Configuration".
  "Start Windows normally".

  Whichever one I choose Windows XP logo appears, then crashes immediately, restart.

  So I tried to use "do not restart in case of shutdown"

  And the blue screen appears

  "stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).

  What is this error? I can't enter safe mode by the way!

  Thanks for your help.

  It's http://support.microsoft.com/kb/330182

  Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.

  If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.

  If you cannot start the computer, go to the next method to update the BIOS of the computer.

  For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:

  315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode
  314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

  Method 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.

  Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:

  1. If a driver is listed by name in the Stop error message, disable or remove that driver.
     • If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
     • If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
  2. If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
  3. Disable or remove drivers or services that you recently added.
  4. Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:
     http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)

  Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XP

  Method 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:

  1. Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
  2. Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
  3. Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.

     Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.

  4. Restart the computer.
  5. Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.

  Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.

  -----------------------------------------------------------------
  You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you!

• Premiere Pro 2015.3 problems after update 2015.2

  I'll have a lot of problems after the update to 2015.3.  It is a project which worked perfectly well, a few days ago on 2015.2 (or whatever the previous version was).  Now, audio is de-energized, it does not play smoothly, and everything hangs after a few minutes - I can't move the timeline, it does not meet the up/down keys to navigate to the previous/next item, it is totally insensitive.  Everything worked well until the update to 2015.3.

  I'm running Windows 7 Pro on a 6-core i7 Extreme with 24 GB of RAM and a Quadro 4000 (v354.35).  I have a 500GB SSD for Windows and the creative cloud, 2 TB RAID 0 HDs for swap/cache/work/etc., 1 TB HD for project files, 2GB RAID 0 video source HDs, 1 GB HD for video output (5 logical volumes, 7 physical disks).  This system has flown before installing 2015.3.

  Help, please!

  Published by: Kevin Monahan

  Reason: more concise title

  Hello

  Please mention the operating system you are using?

  For Windows try the step below.

  Please go to Edit Menu of Premiere Pro > Preferences > Media and uncheck the option "Enable accelerated h.264 decoding Intel."

  Note: It is necessary for the Windows Machines

  Once done restart Premiere Pro and check the performance.

  Vinay

• Problems after downgrading my 200SP CQ61 - missing network controller!

  Hello everyone.

  I'm having problems after downgrade my Vista to XP Pro Sp3 I CQ61-200SP followed existing tuturials and they were very helpful, however I am having problems with the "network controller".

  I tried all these:

  Intel Wireless, (Note: MS Windows Installer 3.1or later, must be installed), here

  Atheros Wireless Driver, here or here

  Broadcom Wireless, here

  Realtek RTL8168C Family PCI-E Fast Ethernet NIC, here

  Realtek RTL8102E Family PCI-E Fast Ethernet NIC, here , or here

  But nothing happens! Please help me because I can not install this controller and I am unable to connect to internet!

  Message edited by zide on 15/11/2009 17:33

  Atheros Wireless here

• Bug? Save fails after edited transformation - java closed connection error

  Hello

  I have a problem with the registration of ODM workflow after editing of node transformation.

  
  Processing node, I did transform change for the variable 'IMP_APPL_PA_EMP_STS_CD_REV_BIN' bin variable, sql code so what:

  case

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('011', '040', '070', '080','090 ')) then 1

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('012', '014', '030', '051', 990')) then 2

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('010', '013', '050', '061', 100')) then 3

  When ('IMP_APPL_PA_EMP_STS_CD_REV' ('015', '020', '021', '022', '023',' 060')) then 4

  When ("IMP_APPL_PA_EMP_STS_CD_REV" is null) then 1

  3 other

  end

  Validation is going well, but after I press save I get the message:

  Cannot save TDW_RISK/Test/binn_test (java.sql.SQLRecoverableException: connection is closed).

  I tell myself that when I put shorter case example - when, sql

  case

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('011', '040', '070', '080','090 ')) then 1

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('012', '014', '030', '051', 990')) then 2

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('010', '013','050 ')) then 3

  3 other

  end

  ewerything is ok. When I add one, two or more "channels" box when example: 061', '100' same mistake happen again.

  I'm trying to do with dif datasource in various workfolows, but nothing helped.

  I found workaround using SQLNode and it works it is not best but to use the transformation of other variables.

  Any idea why is this happenning? Restrictions in node SQL Developer to transform?

  System: SQL Developer Version 4.0.0.12, Database 11.2.0.2

  Kind regards

  Kreso

  Whatever it is, it seems that in SQL Developer 4.0.2 and minor data issue is resolved.

• Forms paper barcode grayed out after edit

  Hello

  I am facing a problem with the pdf form that I created with Adobe Livecyle Designer ES 4 Version 11.

  I have four fields (3 textfilds and 1 drop-down list) and a paper form barcodes on my form (PDF417). IM using fields to fill in the data of barcode. After the user changes the area of barcode fields becomes gray. How can I show barcode update on the form.

  It is the original form.

  

  This is what form looks like after editing fields.

  

  And this is the collection for bar codes.

  

  Thanks in advance.

  Some bar codes will work if the forms have been activated through LiveCycle Reader Extensions (a server product), I'm afraid.

  I recently published another solution.

• pen problem after a reboot mode X200t slate

  I had following problem: after Windows restarts using the slate, I always get the pen doesn't work does not correctly, it's always in the upper left corner of the screnn, every time I touch the screen.

  TouchPoint works well.

  The only solution is to reboot the Dual Wacom Penabled Touch in Manager (stop and start again). This isn't comfortalble, cause, you need one-slate, restart and put the Tablet slate.

  All the drivers are updated to the latest versions.

  I have Win7 32 bit

  C.

  RESOLVED:

  Edition Enhanced Multitouch Driver (last version 7.0.2.19)

  Instal Driver Multitouch (latest version 3.0.0.3)

  BTW, it's a shame for Lenovo list drive more Multitouch for X200T, which does NOT work properly

  C.