Problems after installing vCenter has 5.1 - no vCenter Server found

Similar Questions

• Boot problems after installing Vista SP2 (KB948465)

  I installed SP2 via update.  During the update process there was a power failure.  After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup.  Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.

  After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start.  After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
  I immediately did a system restore to return my PC before SP2 was installed.

  After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed.  It was on 9 November.  As I need my computer, I didn't reinstall SP2 until I had finished this work.

  As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2.  Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.

  Between the 10th and today, 14, Windows Update has installed more than updated.

  Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
  I tried to uninstall SP2 via update.  The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure.  I used the power switch to turn the PC back on.  After startup, the PC told me that deletion failed.

  Then I tried the system restore.  Unfortunately, the first available restore point was post - SP2 installation.  I restored it for the point that is as close as I could.  I tried to uninstall SP2 again through Windows Update.  This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.

  I haven't restarted my PC since then.  Most updates have been downloaded automatically, and the PC tells me that a restart is required.  I'm a little worried that I will end up with a completely insensitive PC.

  I use an Acer Aspire X 3200 with Vista home premium pre-installed.  I don't have a Vista disc.

  Hello, Alex

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems after installing KB978338 on Windows Vista SP2

  I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.

  System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.

  I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.

  Please tell us how can I still troubleshoot or solve this problem.

  Thanks in advance.

  JohnBrown

  Halifax, NS

  So I "hid" the update and you call this one closed without resolution.

  While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.

  Repost:

  See the section "How to get help" of http://support.microsoft.com/kb/978338

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly fee

  I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error

  Hello

  This link may help: the application failed to start properly (0xc0000022).-Microsoft Community

  Kind regards

  Sheena

• Hi I have a problem after installing my CS6.  He repeats to me that msvcr100.dll was not found

  Hi I have a problem after installing my CS6.  He keeps saying that msvcr100.dll was not found?

  Download the runtime MSVC 2010 from Microsoft and install it.

  Mylenium

• Re: Satellite L300 - problems after installing Windows 7

  Hello

  I have a Toshiba Satellite L300 bought with Windows Vista 32 bit about 4 months later, I got my Windows 7 64 bit done.

  1 my laptop has startup problems after I installed the drivers give him additional drivers to go, but I have downloaded drivers for Windows 7 64 bit

  2nd I hear music and want to hear the next song is what I use, but not net if the keyboard fn +? don't not go and play / pause next thank you Stop and media player tased funtionieren not only the weis tase of modest silence

  P.s. to translate with google

  Thanks in advance
  Patrick

  Hi Patrick,

  To be honest, your ad is very difficult to understand and I don t know what you mean exactly.

  According to your assignment, it seems that you need a driver and you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In regards to the FN keys you have Toshiba Value added Package, and Flash Cards Support utility. Everything can be downloaded from the official page of Toshiba.

• DVD problem after installing Win XP Service Pack 2

  After installing XP Service pack2 son of college clicked on a question about activation of WinDVD 5 for Toshiba and now my DVD does not load the program. How can I fix it, remimbering I need help step by step?

  WinDVD is the least of your problems: WinXP SP2 should be installed no later than October 10 2006!

  If the computer running Windows XP Gold or SP1 until earlier, may not be a critical functional application of antiviruse protection installed and 3 + years of security updates have not been installed.

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 [1] needs to be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ================
  [1] extended for WinXP SP2 support ends July 10, 2010. After this date, the computers running under that WinXP SP2 will NOT be offered for additional updates of critical security, automatic updates do not work, and site Web Windows Update won't be available until SP3 is installed.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems after installing drivers for HP Photosmart 5510e

  I was helping my sister set up his new printer HP Photosmart 5510e on a laptop that has Windows 7 64 bit.  She was not wearing the disc so had to download the drivers from the HP website.  Since she has downloaded the drivers, the computer not giving him stop, go to the Task Manager, or do much. I have check that she went to the site of HPs.  Has anyone else had problems with their computersw after installing the drivers?  I don't know what to do.

  Thank you
  Carla

  Hi Cmcgaw,

  Follow the steps below to completely remove the HP software. Let me know if you still have problems with the laptop after uninstalling the software?

  1. type % temp % in run

  2. look for a folder called 7z? Example: 7zS6D6F, and then open it.

  3. open the contents of the file Util

  4. open the folder titled CCC

  5. If you have an HP computer, run L3uninstall.bat. If your computer is not HP, then run the L4uninstall.bat

  6. once the uninstaller cleaning brush is finished, restart the computer.

• Keyboard problems after install "Microsoft Keyboard Layout Creator"

  I bought a new keyboard, a Skyline 895 defender and she did not have some important buttons (such as <> |), so I installed MSKLC 1.4.
  But it turns out it was a big mistake. Now I have problems with key combinations such as ctrl + c and ctrl + v.

  The questions are:

  Sometimes there entry offset, sometimes the information is not copied to the Clipboard, and sometimes after pasting, I get a random amount of info pasted.

  Basically, MSKLC makes my keyboard very unstable and I can't work with my workflow. I've been frustrated because of the randomnes which seems to happen on my PC after installing MSKLC 1.4.

  I tried on another pc without MSKLC keyboard and it works perfectly, no lag, no randomness in Clipboard action.

  It seems that MSKLC has a bug with combinations of keys. Is there a solution for this? Uninstallation of MSKLC will fix this problem and what are the good alternatives to MSKLC? Or do I have to reinstall windows because of this?

  Thank you!

  Hello

  Thanks for posting your query in Microsoft Community.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums for assistance:

  Windows Hardware Development MSDN Forums

  Hope this information helps. Do not hesitate to write to us for all questions related to Windows, and we will be happy to help you.

• iPhone 6 problem after installing IOS 10.0.2 - phone app keeps freezing for 30 seconds

  After installing IOS 10.0.2 on my iPhone 6, the phone app keeps freezing when I open it and remains frozen for about 30 seconds.  Then it closes its doors.  Then only can open and use the phone/directory.  Does anyone else have this problem?

  My husband and my phone do the same thing. We are constantly reset. Very frustrating!

• HP Officejet 7612: analysis of problems after installing Windows 10

  After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.

  Printing is no problem.

  With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.

  I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.

  With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.

  Same problem with "Windows Fax and scan."

  Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?

  Hello
  
  Thank you for using the HP Forums.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Monitor problems after installing SP1

  After installing SP1, on reboot, the screen works nto correctly.... I see the cursor and screensaver.  .. everything else is black

  WTH?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• UCS C220 M3 custom problem after installing ESXi 5.1.0 Cisco

  Hello world

  I m using a Cisco UCS C220 M3 when I tried to install ESXi 5.1.0 custom Cisco after complete the entire process and restart the server. The ESXi has not started it appeared as if there is no operating system.

  In addition, before installing ESXi I configured a HDD in RAID 0, initialized the RAMDisk and chosen as a pilot.

  Hoping someone could help me.

  Llianovich,

  Unfortunately, the on-board controller is not supported with ESXi.  I saw other people using this controller for VMware and makes the work but the behavior is very random and it could work or fail at any time. It is recommended to use one of the controllers of basic PCI or Mezzanine by the ESXi (see c220 m3 datasheet below)

  STEP4SELECT CONFIGURATION of RAID (page 21)

  http://www.Cisco.com/en/us/prod/collateral/ps10265/ps10493/C220M3_SFF_SpecSheet.PDF

  Embedded MegaRAID controller

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C220/install/RAID.html#wp1028426

  

• problem with installing vcenter

  Hello

  I have problem with the instalation of win7 64 vcenter in the virtual machine, it is a victory of new costs 7

  I have attached the log here

  Thank you

  vCenter Server is only supported on server operating systems. Please see VMware Compatibility Guide: search guest conductor /

  André