Problems connecting to half mini-map DW1520 wireless-n wlan

Similar Questions

• Dell DW1506 (802.11 b/g/n) half mini-map WLAN

  I bought a Dell Inspiron 660 s today and the order confirmation scored points ' Dell DW1506 (802.11 b/g/n) half mini-map WLAN. "  I have a Speedstream 4300 modem connected to my existing computer and wonder if it is possible to connect the modem and the DW1506 or if the DW1506 would replace the modem.  I apologize if this isn't the most intelligent question, but I've never had an experience with a WLAN.  Thanks for any help!

  Hi SquarePeg61,

  The modem Speedstream 4300 does not support Wi - Fi. you need a wireless router to connect wireless computers.

  As the system has a wireless card installed DW1506 mid-height mini-map WLAN installed in it, please get a wireless router to an electronics nearby at a cost-effective price store to connect the wireless system.

  Good answer for any other help.

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• Dell Wireless 1502 (802.11 b/g/n) half mini-map WLAN

  Tried to remove this map on a new Dell Vostro 260 (there where he didn't need) and put it in a Dell Optiplex 360 with Windows 7 x 64.  When you try to install the driver the setup.exe gives the message: "Setup cannot run on this platform."  I tried to check I select the Win7 x 64 option to download but still no luck.  The file info is Driver Atheros 26/05/2011 - Version 9.1.0.328, A01.

  Maybe is this not compatible with older hardware Core 2 Duo card and require an i3 + chip?

  Even if your original post is a year old... I had the same problem. I downloaded the x 64 driver package 9.1.0.328, A01 win7 and it failed with the same problem. (The strange thing is that I have an another Inspiron 620 running win7 x 64 and the driver installed, a native of Dell, is the 9.1.0.328 version?) So, I tried the other available win7 x 64 package, 9.2.0.517, A02. Yet once, didn't with the same "the installer cannot run on this platform." I decided to try and manually install the driver instead of using the installation program. Pass - Manager Control Panel/hardware and sound / control unit and made a right click on this card in 'network adapters' click on "update driver software," go in the appropriate directory on the C: which was created from the extraction of the package, and then click 'ok '.  I could get my dell 1502 works this way. I deleted the complete directory which was created from package 9.1.0.328. I found myself with worm 9.2.0.517... only because it was the second package that I've extracted. I assumed that 9.1.0.328 would have probably worked this way too much.

• Problems connecting to the internet with my wireless router

  I have a WRT54GS v7 wireless router that I use with a modem ADSL ZyXEL P-660R-D1. during installation, I was unable to establish a connection to the internet, once my router is properly connected to my desktop computer and my modem. All the correct lights on my modem and router are turned on. Please help, I tried to turn off the two as instructed by the installation wizard, but who failed to make the internet connection works and I continued the installation process after many attempts. At the end of the installation, he said that my router has been set up, but I don't have an internet connection. What should I do to fix this?

  The problem you are experiencing is caused by the fact that you Zyxel and your WRT54GS both try to use the same 192.168.1.x subnet.   Your WRT54GS will not work properly if you try to put the same subnet on the LAN ports and the port Internet (WAN).  Also to note that the installation wizard will not work in your situation, then stop using it.  You will need to manually configure your router.

  There are two ways to solve the problem:

  Option 1) Change the subnet in the WRT54GS.    To do this, follow these steps:

  (a) turn off your network

  (b) disconnect the WRT54GS of other devices.

  (c) connect a single computer via ethernet cable, a LAN on the WRT54GS port

  (d) turn on your computer and the WRT54GS

  (e) point your browser to 192.168.1.1 and connect to your WRT54GS

  (f) change "local IP address" 192.168.2.1, then click the 'Save Settings' button and wait (3 to 60 seconds) of the screen refresh.  You will be probably disconnected from the WRT54GS.  Don't worry about this.

  (g) take out your browser and turn off the WRT54GS and your computer.

  (h) then, using an ethernet cable, connect the Zyxel ethernet port to port Internet (WAN) of the WRT54GS.

  (i) power of your network.  It should work.

  You will now access your pages of configuration WRT54GS to 192.168.2.1

  Option 2) the other way to solve your problem is to change your Zyxel to 'bridge' mode  (You will need to consult your Xyxel user guide, or your ISP website, to find out how to do this).  This will convert the Zyxel a real modem, and then he won't get an IP address.  After that, you need to configure your WRT54GS to your PPPoE connection for you.

  I guess that your Zyxel is a PPPoE connection.  If we perform a PPPoA connection, then does not allow Option 2 because your WRT54GS is unable to make a PPPoA connection.

  Additional notes:

  You don't need to do both options.  Choose one or the other.

  For a more normal web use including browsing, email, downloads, etc., or another option should work fine.  If you are an online gamer, you will probably prefer option 2, because this will make it easier to set up many online games.

• Problem connecting to the network via a wireless connection

  Original title: why my knees is not connecting to the internet that she used to...?

  "My automatic connection to my net service simply does not work, when I put the appp problem solving through net wireless configuration, I can see it check adapter, services and ultimately he connects to the internet, but I didn't do it before, it was automatic, another affected is the lower display side right hand that appears when you click on the" internet access "icon". If do you it while he's looking my net service name, it seems empty that a connection broadband which I didn't use before I use the modem provided by INFINITUM... YOU HAVE AND IDEA WHAT UNDERWAY? At the moment I'm connected like I got the app work and conect problems problem but it says that there is the problem; "THE DIGNOSTICS GUIDELINES SERVICE DOES NOT WORK.

  Hello

  1 did you do changes on the computer before the show?

  2. who is the application that you are talking about?

  3. What is brand and model computer?

  Method 1: Update the wireless network drivers

  See the site:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Reinstall the application

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3: Disable security software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a system restore

   

  See the site:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

• Anyone with problems connects an iPad mini to a wifi 2.4 GHz since update to 9.3.1 and 9.3.2 iOS?

  Since the two latest updates, my original iPad mini will connect is more than all the routers wifi 2.4 Ghz based.  If it's a double router broadband with a 5 GHz signal, I can always connect to those, but they are not as prevalent.  He also broke my ability to bind to my hotspot MiFi Karma that I used to work.  I am * off with Apple to disable the part of my iPad is an understatement at this point.

  No, I have

• Compatibility problem XP Dell Wireless 1395 mini-map WLAN driver currently installed Vista Home Edition 32 bit Service Pack II

  Hi, my OS is Windows Vista Home Edition 32 bit Service Pack 2 - installed on XP by the owner without first unintalling XP.  Although my Device Manager lists the mini-map Dell Wireless WLAN 1395 as working properly, what Windows says that it has stopped working correctly because the driver installed is not compatible with my current operating system (just one of the many questions).  Although I can get online wireless most of the time, IE and Google Chrome often freeze and there are a few minutes, I got a blue screen - not for the first time - that shut down Windows.  I note the other error message information that a fatal error has occurred that required Windows stops, so am not sure that the two problems are related or not.  I tried to find a compatible driver for what I assume is a WLAN Mini card for the original XP OS on the compatibility of Vista site, but there is no driver is listed for the Dell Wireless WLAN mini-map 1395.

  I have the Vista installation CD, but not the verification code necessary to reinstall.  It will appear somewhere on this computer under the program or the ancillary system (information) available to administrators?

  Just out of curiosity, there is a feature of rectangular white USB printed with the name "Biogear" attached to one of my ports, although he is not listed among devices on my computer since the computer laptop original owner died and I can not ask what is its purpose or what program it was meant to facilitate. I tried to remove it and it came out (the envelope detached the part inserted into the USB port) without affecting my ability to access the Internet wireless.  An internet search has a line of golf apparel and a few articles in German... Any ideas?  Thanks, Lara

  If the original owner installed Vista on XP, you need to reformat and do a fresh install of Vista or you will continually have problems multipling. If the original owner is an update from XP to Vista it is OK. However, the problems that you're seen suggest the original owner installed Vista on XP. Verification code (if found on the computer) will not be for Vista but for XP. As long as your operating system is installed, you can retrieve the key with Free Key finder software, do a search and you will find them on the internet. Also if you have the CD and ask for a new key to Microsoft you will get it at a very low price, I don't know no current tax, was $ $10,00. Since you are not the original owner (and the first owner died) both of these options may not be totally legal, unless you can provide proof of purchase or the person deseased was a member of the family.

• Cannot connect to a WPA - PSK with WLAN DW1520 Wireless-N particular, but can when no security is set to wireless. How can I get the card to use WPA - PSK?

  I have a DW1520 Wireless-N WLAN Half-Mini card in an Alienware M17X10. I am trying to connect my home through a TRENDNet TEW-435BRM access DSL issue in WPA - PSK.

  I was able to get the card to use the accounts wireless WPA2-PSK and WPA - PSK in other areas is not a problem directly related to WPA - PSK.

  I can get it to connect to the network when the diffuse TRENDnet without security (free release) and when directly plugged into the wireless router, cable - but every time I go to dissemination of WPA - PSK it can't connect?

  While in WPA - PSK the WLAN card can 'see' the network and wireless router can see the 'computer' (and is a 'trust machine'). I have one couple of other previous model Dells connected to the network without problem or needed changes if any ideas why I would have questions here?

  The driver installed is the 'last' to 5.60.48.35.

  I tried to restart the router and the computer without success. I use Windows Firewall.

  No bright sparks that can point me in the right direction?

  Thank you

  Declan

  Hello

  Try resetting the password in the part of the router wireless, then copy and paste it to the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot find drivers for Dell Wireless 1395 WLAN mini-map for my dell vostro laptop 1400

  install the drivers for the controller network by name

  Dell Wireless 1395 mini-map of the cd WLAN failed and could not find it online too.

  Go to: http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=VOS_N_1400&os=WLH&osl=en&catid=&impid= and select network devices and there you will find drivers for the WLAN Wireless 1395 mini-map for Vostro 1400 laptop.  Make sure you check the first good version of Vista to ensure you get the correct driver.  It would be better if you are returned and entered your product Tag so the system would correspond to results to your specific computer, but you (and you could buy them separately in which case they may not be listed).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP OfficeJet 6500 E710n: HP OfficeJet 6500 printer problem - connection to new Comcast Wireless Gateway E710n

  Use this printer (wireless) for a few years without problem connected to a Linksys 802.11n wireless router.  Connected to a desktop computer and two laptops.

  Comcast asked recently that I update my modem cable to a new wireless, which also serves as a 802.11n access point wireless router.  I installed the new point wireless very well and has been able to set up the printer on a wireless network. (IP, host name and Mac address doesn't appear on the thin printer).

  I reinstalled the printer drivers on each computer and everything worked very well last weekend.  This weekend, I went to turn the Scanner on the desktop (HP Pavilion, Windows 7, 64-bit) and it wouldn't work.  Then I reinstalled the device drivers and then there was no connection to the printer (many reboots the PC and printer at various times during the tests).  So I ran again the connection settings on the printer - and led wireless term.  (I was able to get the scan to the connection to the computer once on one of the laptops, never the office, then lost.  When I send to the printer, it goes into the queue, a very small number of bytes, cross (usually hear the printer starts) then there lost error "connection to a printer.  Oddly enough, a couple of times after canceling the print job in the queue, the printed test page actually printed a few minutes later...

  I tried to use HP Print & Scan Doctor - it was a complete waste of time.  To date, it has always died (do not connect not not the unit) and never been able to diagnose something.  I end up having to go to the Task Manager to kill him because he always hangs.

  Any thoughts?  I'm puzzled.

  Appreciate any help/ideas that someone can think.

  FYI - I have still no idea what the question is / was?

  Connected to the gateway wireless from Comcast to the old Linksys router and I went back to my old wireless network.  After you have reinstalled the printer drivers, re-connection of the printer to the old wireless network, re-start the printer and computers - I was (finally...) manages to get printing and scanning works again.

  What a waste of a morning/afternoon.

• half-mini wireless-n DW1520 card will not work on the only G N

  I recently updated my internet connection to 30 MBPS to 15 with the Charter.  I ran a speed test with my Dell desktop computer with the Ethernet cable directly plugged into the modem and got a speed of decent connection, but when I use my router and Wireless - N DW1520 Half - Mini Card on this computer, the connection speed drop nearly in half!  It seems that the card will work in Wireless-G and not the faster Wireless-N.  Why is it and, if possible, how can I change this setting?  Thanks for your time.

  Hello

  Don't forget to convert Mbits in megabytes.

  Check this box:

  WiFi vs actual throughput speeds
  http://www.wifihowto.NET/WiFi-speeds-vs-real-world-throughput

  You must use N g would not work anywhere near as fast you see.

  G = 54 Mbps or 6.8 MB and real world 3.4 MB

  N = 300 Mbit turbofan 150 Mbps single stream or 37.5/18.7 MB and real world 18.5/9.3 MB.

  Interference, the distance and other environmental conditions may further reduce the speed WiFi.

  Thus, it seems that your WiFi becomes very good passage of double-flow N.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• problem with mode Dell Wireless 1395 mini-map standby in windows xp

  I have problem with my computer laptop inspiron 1525 and the mini-map dell 1395 wireless.

  I installed windows vista for about 4 months, and there is no problem with the wireless.

  now, I have installed windows xp prof.  and it's the wireless card works fine. I put my laptop mode "Eve" and after a walk to the top. the wireless card absolutely does not work.

  I tried to uninstall and install the driver, I tried to run windows backup, I tried to do what I can, but no useful idea.

  Tip: When I try to check for the networks without wire around me, he say like this but in Arabic "could not verify the 65535 channel, verification will be repeated later.

  http://www5.0ZZ0.com/2008/07/02/17/850863907.jpg

  [url = http://www.0zz0.com] [img] http://www5.0zz0.com/2008/07/02/17/850863907.jpg [line] [url]

  any body help me befor replacing the xp on vista

  
  

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• Intel Dual Band Wireless-AC 7260 WiFi Bluetooth Half Mini Card

  Hi, I have a question, Intel Dual Band Wireless-AC 7260 WiFi Bluetooth Half Mini Card will work on my Dell Inspiron N5110? without having any hardware compatibility problems...

  Kind regards

  Yes.

  I installed on my dell n5110 and it works.