problem with mode Dell Wireless 1395 mini-map standby in windows xp

Similar Questions

• Compatibility problem XP Dell Wireless 1395 mini-map WLAN driver currently installed Vista Home Edition 32 bit Service Pack II

  Hi, my OS is Windows Vista Home Edition 32 bit Service Pack 2 - installed on XP by the owner without first unintalling XP.  Although my Device Manager lists the mini-map Dell Wireless WLAN 1395 as working properly, what Windows says that it has stopped working correctly because the driver installed is not compatible with my current operating system (just one of the many questions).  Although I can get online wireless most of the time, IE and Google Chrome often freeze and there are a few minutes, I got a blue screen - not for the first time - that shut down Windows.  I note the other error message information that a fatal error has occurred that required Windows stops, so am not sure that the two problems are related or not.  I tried to find a compatible driver for what I assume is a WLAN Mini card for the original XP OS on the compatibility of Vista site, but there is no driver is listed for the Dell Wireless WLAN mini-map 1395.

  I have the Vista installation CD, but not the verification code necessary to reinstall.  It will appear somewhere on this computer under the program or the ancillary system (information) available to administrators?

  Just out of curiosity, there is a feature of rectangular white USB printed with the name "Biogear" attached to one of my ports, although he is not listed among devices on my computer since the computer laptop original owner died and I can not ask what is its purpose or what program it was meant to facilitate. I tried to remove it and it came out (the envelope detached the part inserted into the USB port) without affecting my ability to access the Internet wireless.  An internet search has a line of golf apparel and a few articles in German... Any ideas?  Thanks, Lara

  If the original owner installed Vista on XP, you need to reformat and do a fresh install of Vista or you will continually have problems multipling. If the original owner is an update from XP to Vista it is OK. However, the problems that you're seen suggest the original owner installed Vista on XP. Verification code (if found on the computer) will not be for Vista but for XP. As long as your operating system is installed, you can retrieve the key with Free Key finder software, do a search and you will find them on the internet. Also if you have the CD and ask for a new key to Microsoft you will get it at a very low price, I don't know no current tax, was $ $10,00. Since you are not the original owner (and the first owner died) both of these options may not be totally legal, unless you can provide proof of purchase or the person deseased was a member of the family.

• Cannot find drivers for Dell Wireless 1395 WLAN mini-map for my dell vostro laptop 1400

  install the drivers for the controller network by name

  Dell Wireless 1395 mini-map of the cd WLAN failed and could not find it online too.

  Go to: http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=VOS_N_1400&os=WLH&osl=en&catid=&impid= and select network devices and there you will find drivers for the WLAN Wireless 1395 mini-map for Vostro 1400 laptop.  Make sure you check the first good version of Vista to ensure you get the correct driver.  It would be better if you are returned and entered your product Tag so the system would correspond to results to your specific computer, but you (and you could buy them separately in which case they may not be listed).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dell Wireless 1395 WLAN can communicate with the Netgear router

  Everything works very well with my old HP laptop.
  Now, I also have a Dell Inspiron 1520 with a Dell wireless 1395 WLAN mini map. I can't links with my Netgear router using the new Dell. However, I can link to the top of my next "s"Linksys"router, but by very weak signal because of distance. How can I set up for my Dell to connect with my Netgear router?  I went through all the routines of wireless network of Microsoft AND Dell Wireless network routines.

  
  

• Problem with on Inspiron 1521 1390 mini card

  For the past few weeks, I had trouble maintaining a stable wireless internet connection.  I have intermittently lose connection or the connection strength fluctuates.  I have an Inspiron 1521, with a Dell Wireless 1390 Wlan Mini Card.  Also, I am running Windows 7.

  A few hours ago, I suddenly lost my wireless connection and could not restore.  I ran the diagnostic tool, who reported that there was a hardware or a problem with the driver with my minimap 1390.  Now, when I go into the Device Manager, it has an exclamation mark next to him and he says: "this device cannot start (Code 10)".

  I rebooted my system and downloaded and installed this driver (http://www.dell.com/support/drivers/us/en/04/DriverDetails?driverId=CR6YY&fileid=2731101777).  Now, device manager says "Windows has determined the software driver for your device is up to date," but there is always a Code 10 error.

  It just means that the card needs to be replaced?  I don't know what to do now - any help would be appreciated.

  I received today my wireless card new (Dell Wireless 1395 - that now recommends Dell for my system).  I installed it and as soon as I turned on my laptop, the card was recognised, software driver had already been installed (somehow) and available wireless networks detected card.  I'm now connected wireless using this card.

  Sundeep B, thank you very much for all your help!

• Problems with a contact form of Muse in a plesk (windows) Godaddy hosting account

  Hello

  I have problems with a contact form of Muse in a plesk (windows) Godaddy hosting account. It is not send. It is as if the input image verification is not valid.

  I tried BusinessCatalyst and it works fine. I also tried a similar form on another site hosted on c-Panel (linux) to Godaddy and it works as well.

  Help!

  Thank you.

  Hi Marianne,.

  Please check with your host for assistance with the same provider.

  Kind regards

  Akshay

• Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Hello

  I suggest you fine the link below and it will help you.

  Does not open App | Wheels of progress turn continuously

  Concerning

  Maansee

• Dell Wireless 370 Bluetooth wireless internal mini map does not, download the error code 43.

  Original title; - minimap wireless Bluetooth does not

  All of a sudden my internal Dell Wireless 370 bluetooth minimap has stop working and displays an error: Windows has stopped this device because it has reported problems. (Code 43). Could someone help me please

  Hello

  1. did you of recent changes to the system before the show?

  Method 1:

  Follow the link below and run the fix - it tool and check if it helps.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Follow the link below and download the drivers for the Bluetooth device and install and check if that helps.

  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/DriverFileFormats?c=us&l=en&s=DHS&CS=19&DriverID=R226750

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if it helps.

• Dell Wireless 1395 802.11 g WiFi card compatibility with Windows XP

  I would like to buy a Vostro 1000 with Windows XP to replace a Dell Inspiron 1100 failed on a home WLAN.  However details of the card WiFi of 1395 provided with lists of Vostro Vista as the only supported operating system.  I don't want Vista to avoid potential compatibility issues with the rest of the network that uses XP, especially the Linksys router.  However, I have seen the 1395 as having drivers for Windows XP.  If anyone can clarify this?

  
  

• A30 - problem with intel pro Wireless 2200bg - wireless always turn off

  Hello.

  I have a problem with the wireless card Intel pci mini. I installed in the connector mini pci and connected the 2 wires. I also installed drivers and software to Intel. But the connection is always available. I changed the wireless switch located on the left side of my toshiba, but said software, the hardware radio switch is off.
  I reinstalled operaiting system XP Home, XP Pro, but all the time I have information that this switch is off.

  Thanks for any information

  Hello

  Please first check that when you the physical switch turn on wireless communication, you should also somewhere (probably near the switch) see an orange light.
  If this isn't the case, then there is something wrong.
  Did also attach you the antenna cables to the Wifi card?
  You use the Windows XP client or customer of Intel for wifi?

  BR

  Tom

• problem with wifi Dell 1510

  I have a problem with my wifi. It dosnt work. I don't know if my adoptive parent works well. I think that the problem is related to software. I want to know what to do to connect to wireless internet. my windows is vista Home premium. one thing I should say is that when I turn on his lamp dosnt light up my wireless.

  Thanks indeed

  http://support.Dell.com/support/downloads/index.aspx

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  If the problem persists with your wireless network, please contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L505D - problem with mode standby in Windows 7

  It's me again, in the last thread:

  "Hello friends,

  I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)). "

  The mode 'sleep' worked perfeclty for a few days and it's still gone... What more when I try to enter the mode "sleep" I can't do anything on the laptop, it still works on the white screen and the transformers fan works high speed. In recent days, when the "sleep mode" worked, windows has no update...

  I don't know what is happening... :) Weird problem, isn't?

  It is not easy to say why this is happening. In your last post, you wrote about some updates of windows. Who knows what's wrong there.
  If nothing is done, not even system restore and you want to use the standby mode I recommend you save all your data and install the new OS by using recovery mode.

  With the settings everything's going to be OK but then be careful with updates.

• How can I fix a problem with my Dell Inspiron 1750 internal speaker?

  I started having problems with the internal speakers on my Dell 1750. Everyone knows about this problem? Is there a solution?

  Hello

  For hardware problems, you will need to contact the manufacturer of the computer. Here is a link for your convenience.

  Dell Contact technical support: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&cs=19&l=en&s=dhs& ~ ck = mn

  Concerning

• Problem with wag160N router wireless

  Hi all. Sorry for the typos etc I am new in the forum :-). Please, if the subject has moved to another subforum do it.

  So, here's the problem: last week, I bought the WAG160N wireless-N adsl2 + modem router (version 2) and yestreday I formatted my laptop 2, so today I decided to install a new one.

  I work 2 hours on it now, but still I can't find a solution. I started with the first cd, as required by the guide. Everything works well until the installation wizard step that attempts to connect to the router. At this point, he's looking for 5 minutes and then he said that he is not able to communicate with the router and wonder to check the connection again. I connected everything as it should (the gray wire of telephone jack to the socket of the router that says DSL, cable - ethernet - yellow of Gate 1 of the router ethernet for the laptop and then the AC/DC to the router and power.) I click next to the installation wizard, then he said to the power on the router... I do it and it checks then 5 minutes and again, he says that can't find it and tell me to double check and the story goes like this. I made 6 - 7 times but nothing. I also used the netwotk magical Wizard that was installed to fix the problem (because it recognizes that there is connection problem), but is not able to set in! What should I do? The ISP said that they don't sell Linksys products for their stores (I do not know the ISPS work on other countries, here they sell routers, adsl packs ect in their store) so they can't provide me with support. Can someone help me? Its the first time I use a linksys for me product and I don't know how to install it without the cd.

  I use windows vista pre sp2 on two laptops.

  I must also say that I have no problem with the ethernet connection the baudtec my ISP gave in the pack, that I bought when I activated my ADSL (2 years ago). IM connected with it now to view the topic.

  Sorry for my bad English and im sore right now that I can't think of what other info you might need, post and I will answer you.

  Thx for reading.

  Hello

  Connect your device directly to your pc via ethernet cable.

  Try to find the ip address of your device using the arp - a command

  Try to ping your router/adsl with address (192.168.1.1) ip of the device. u should get a response, if no response then in your pc check the LAN connection properties and enable DHCP.

  If you get always no response to ping the device, try and set an ip address in the range (192.168.1.1 or whatever your ip devices). Now, try to configure the device to cd Wizard help.

  Correct me if im wrong.

  Concerning

• Problem with network controller / wireless driver

  Hello, I have problems with my computer network controller. I can't connet to the Internet wireless or wired. In addition, two of my USB Ports do not work.

  My system is HP Pavilion G4 - 2235dx

  A6 - 4400M with Radeon AMD

  Windows 7 Professional

  The hardware ID

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C

  PCI\VEN_168C & DEV_0032 & CC_028000

  PCI\VEN_168C & DEV_0032 & CC_0280

  There are other issues such as:

  PCI device

  SM Bus controller

  USB controller

  When you open Device Manager and every thing under "Other devices" are not available, you will get the real picture. Please I need your help to make this work again.

  Thank you.                       David

  Hi, David:

  Here are links to the drivers you need:

  1. first install the amd chipset driver and restart. You only want to use the first file on the Web page.

  This will install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  2. wireless card driver is the following:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  3 PCI device is the following:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=