Problems installing the 4-DVD set 2013

Similar Questions

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Equium A200 - problems with the CD/DVD-RW and Realtek HD driver

  I'm having some trouble with my Equium A200-1VO.

  First of all, I can't get the CD/DVD-RW to write any dics. The Player opens also from time to time.

  Secondl, I just downloaded and installed the latest driver Realtek HD audio, under the guidance of Toshiba, to see that when I plug my headphones the sound always comes out of my laptop speakers.

  Any help or thoughts?

  Thank you

  Now, he can be really problematic. If you use your own installation of the OS, no one can say with certainty what can be the problem. Each laptop manufacturer, including Toshiba, offer recovery image installation and in using the factory settings, everything should work well. These recovery images are tested and they offer all the hardware and software features.

  Maybe you should install Vista using recovery media supplied and check if all these problems are happening again. If yes then we can talk about the unusual and serious issues.

• Qosmio G40 - impossible to install the HD DVD player

  Qosmio G40

  It is not possibel to install the software for HD DVD Player Toshiba Windows 7-64 bits 4.60.03 of 11/30/09. After installation, the installation will be finished with the information that the software is not for this system.

  Anyone has the same problem or a solution to this affect...

  Thanks for your comments...

  Hi mate

  Please take a look here:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=184685

  The thread is on the same theme.
  It seems that this is not a full version but only an update.
  You will need to install the HD for Vista drive and then update Windows 7

• Impossible to install the Player DVD Toshiba HD for Windows 7-64 bit

  Laptop: Toshiba Qosmio G40 with windows 7 Ultimate 64 Bit

  I can't install the driver of DVD HD Toshiba for Windows 7-64 bit 4.60.03 from 30/11/09!

  The facility will be cancel information that the software cannot be installed on this system.

  Problem is that the file that you downloaded is not the player but just an update.
  Usually, you should be able to install player designed for Vista and install this updated level, but eventually I can see, Toshiba doesn't offer HD DVD player for Vista 64-bit.

  I assume that your laptop comes with Vista 32 bit only. Am I right about that?

• Problems with the software DVD-ROM discs

  My hard drive is not always save when I insert my Sims 3 disc. They are the software DVD-ROM discs. Recently, I was able to install a new but have not been able to get my computer to record the disc since then. How can I solve this problem?

  Hello

  1 are. what software you referring?

  2. what operating system is installed on the computer?

  3. you remember make changes to your computer before this problem?

  Try the steps in the following article: your CD or DVD cannot read or write media http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

• Windows 8 cannot install the package redistributable vc 2013

  Hello, for some reason any cannot install the package redistributable 2013 on my windows desktop vc 8.

  I run the file vcredist 64, the pop-up window with show the progress of the installation... and nothing happens, the progress bar stay empty.

  I discovered this problem on behalf of the new SpaceInvasion.fr hammer war game that i download throug steam, after downloading steam tries to install the package redistr of vc and he could not. So therefore I can't start a game.

  Pls Help!

  What can be the problem?

  Hello

  Thanks for the help, but the problem is solved by the system (System Restore) restore to 3 days before.

• Laptop of HP ENVY 15 TS: problems installing the audio driver

  Hi all

  My product is the HP ENVY 15 TS laptop.

  Product number: E7Z34UA #ABA

  OS: 8.1 64-bit Windows

  A few days ago, I opened my laptop to find that there is no sound coming from the speakers at all. I was completely baffled because the audio was working perfectly fine before, even after the upgrade to Windows 8.1. I tried several solutions posted on other forums, such as install other drivers and uninstall the IDT High Definition Audio Driver and then scan for hardware changes. Now, however, when you try to update the driver IDT, it says that a peripheral attatched to the system does not work. What should I do?

  I've provided screenshots of things that appear when trying to solve this problem.

  

  Hello skyeisthelimit. I understand there is no sound emitted by the mobile phone. According to the description, I think that the question is focused on software. However, I won't remove the defective hardware of my mind. You have attempted a few troubleshooting, which is excellent. I'll provide some troubleshooting facilities (some steps you already completed). Please follow troubleshooting all in order, I suggest:

  First of all, there are some tutorial of Microsoft Assistant that solves the problems of sound in Windows 8.1. Please follow the wizard until it is finished. You can locate this wizard here: http://windows.microsoft.com/en-CA/windows/no-sound-help#no-sound=windows-8 & v1h = win8tab1 & v2h = win7tab1 & v3h = winvistatab1 & v4h = winxptab1

  Then, follow the troubleshooting, indicate in this document from HP: http://support.hp.com/us-en/document/c03257712

  Finally, you will be asked to reinstall the updated drivers. Please install it: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1 & cc = us & dlc = in & lc = on & os = 4158 & product = 5450018 & sw_lang =

  Assuming that the problem is not resolved, the next step is to refresh of Windows 8. This will force the computer to return to Windows 8. It will also clean the computer, to a certain extent (it is not as powerful as a recovery). For more information about how to update Windows, please see this document from Microsoft: http://windows.microsoft.com/en-CA/windows-8/restore-refresh-reset-pc

  If the operating system update does not resolve the problem, reinstall the operating system is the next step. Make sure that you back up all your data beforehand.

  For more information on how to effectively back up your computer, please this document of reference: http://h10010.www1.hp.com/ewfrf/wc/document?cc=us & lc = on & dlc = in & docname = c03270359

  For more information about how to perform a system restore, please reference this document: http://support.hp.com/us-en/document/c03489643

  Please answer with the results of your troubleshooting. I'm only here to help!

  Mario

• Satellite A660/07U - problem install the nVidia for Win 7 64 bit driver

  A660/07U Windows 7 64 bit

  At first, I need to install this driver because apparently it will solve a problem with the current driver that is causing the computer freezes when booting with an external monitor as main display.

  I downloaded the Setup file of driver from the Toshiba web site and it's extraction ok but when I run the program it just then immediately quits without installing drivers.

  The Device Manager in windows seems not help either, because when I point to the extracted files it tells me that I already have the drivers, even if my current version of the driver is a lower number than the one downloaded.

  Restart made no difference.

  Any ideas/suggestions?

  Thanks in advance

  Hello

  It is a series of laptop Toshiba to THE.
  Where did you download the driver?

  Usually, you must choose the driver from this page:
  http://www.MyToshiba.com.au/support/notebooks/satellite/A660/psaw3a-07u00r/download?OS=25

  I recommend you to download and try to install it once more

• Problems installing the new hard drive OSX iMac G5 A1076

  I have an Imac G5 A1076 model who needed a new hard drive

  The hard drive for now I can not install the OS!

  I formatted the hard drive using transmac on my Win 7 pc (since I don't have access to another mac)

  I also bought the 10.3 disk 3 cd OSX Install discs.

  When I put disc 1 in hold C and start the IMAC I get a gray screen with a gray circle with a line through it.

  Maybe I was reading that this is caused by installing is not the correct OSX?  I looked on everymac.com and found that it was originally shipped with os x 10.3.5

  do I need to get a drive to 10.3.5?  He will tell 10.3.5 the disk?  my 10.3 that I bought new in the box never open just says 10.3.

  Help, please!

  You need the original computer disks or details of Mac OS X 10.4 through 10.5.6 DVD.

  (137519)

• How do I install the cd - dvd driver and hence

  I use a drive cd - dvd but now Im receiving to reinstall.
  How and where? my driver installation disk? or...

  Hi Phillip Rose,

  1. what operating system is installed on the computer?
  2. What is the brand of the CD/DVD drive?
  3. don't you make changes to the computer before the show?

  I suggest you to download and install the drivers for the CD/DVD on the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• HP Support Assistant unable to fix a problem with the CD/DVD not detected

  I have a G42-415DX laptop and I can not read cd/DVD, it was working fine 3 weeks ago and now nothing / I tried the support assistant and he could not solve the problem.  I got a message saying the driver must be reinstalled, how do I reinstall the driver?

  Hello

  If you do not get the chance to use another PC, I would definitely create the CD and the DVD bootable as it would give a clear indication if there is a hardware problem with the optical drive.

  In the meantime, try following the procedure in the title of the subheading "Let me fix it myself" on the link below to remove upper and lower filters (if these registry keys exist) and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  If find you the following registry keys and delete them, restart the laptop before checking the disc.

  Kind regards
   
  DP - K

• Problem with the default printer setting.

  My default printer setting is changed without doing me it. This can be avoided?

  Thank you. I did this. I also installed the Thirdring app and it works a treat, so I'll see how things are going in the future. Thanks for your helpful tips.

  Ian

• Problems installing the software and updates

  I ran Microsoft Fixit as some updates and the printer software will not install. As a result, "one or more components of Windows Update are configured incorrectly". I run XP on Dell 7 years. He seems to have lost the installation files. Can anyone help please? I can re - install the original XP disc?

  I ran Microsoft Fixit as some updates and the printer software will not install. As a result, "one or more components of Windows Update are configured incorrectly". I run XP on Dell 7 years. He seems to have lost the installation files. Can anyone help please? I can re - install the original XP disc?

  You can do a fresh install if you feel that this is necessary.

  You can try to go through this list as well...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.