Problems of 2 GB HP P6-2371ea and XFX Radeon HD R7750
I managed to change the bios so that I can boot from my new graphics card, but it seems slower than the built in graphics, I did something wrong?
I read the posts before I decided to post here and followed all the instructions, disabled security and allowed Legacy support, but it just doesn't seem right, I can't get 5.9 for Desktop graphics on Windows Experience, 6.4 for 3D graphics, is possible to disable the integrated graphics card or am I got away with it in this way?
I've also equipped with a 600 Watt power supply before the GPU.
Any help would be great, thank you very much
Install a new video graphics card disables the default integrated Intel GMA HD graphic card.
If you were hoping you could create a game PC on your public large PC OEM, you know now that you can not.
There are constraints to the motherboard, memory and BIOS (multiplying bus and bus voltage) options that you do not have.
Best regards
ERICO
Tags: HP Desktops
Similar Questions
-
I just bought a refurbished Airport Extreme and I intend to use it as my router & combine with our old time Capsule of existing one to create a roaming Wifi network.
The new Airport Extreme (renovated) is in my studio/Office - directly connected to our internet broadband wireless (WAN port)
Our small ethernet is connected to my iMac [mid 2010 running OSX 10.11.5] & a PC and extends up to 2 other domains through an ethernet switch.
This configuration works very well, our internet speed has improved slightly - better than our old T-Link router bit. WiFi available throughout the House - better on one side.
Time Capsule (2 TB) is connected by ethernet on the far side of the House, offer backup Time Machine and strong Wifi to this area.
This time Capsule was an existing installation that went perfectly with the T-Link before I bought the Airport Extreme.
I used the Airport utility to set everything up and it seems to work.
The problem is:
Combines the Capsule and extreme connected & active, the Internet gradually slows down and grinds to stop. -Wifi seems to follow suit, but is much more gradual.
If I disable the Time Capsule, the internet connection is back to normal, Airport Extreme Wifi signal is strong and extends to almost all areas.
I got to the departure of the two units configuration problems, so I reset both factory default and from that moment managed to do all this work - with the exception that the internet connection slows down. Whenever I visit a different web site, it takes more time to load/link upward.
I spoke with our ISP, the link to our tower is solid. The technology suggested that I put Wifi on each unit to use a different channel (2 frequencies & several channels each available).
So far, this has not resolved the problem, I will continue to make adjustments.
I googled this - most of the answers are not to date - usually 2012, 13, 14. and not directly related to my situation. But I will continue my search.
I'd appreciate if anyone here has any suggestions
The new Airport Extreme (renovated) is in my studio/Office - directly connected to our internet broadband wireless (WAN port)
What is the number and the model of the modem or modem/router that your ISP has provided you?
Should we assume that you use a Mac with the help of a current or recent operating system?
If you get out of the Capsule of time and leaves disabled for now, the network AirPort Extreme continue to run at full speed for a few hours and not slow down?
We ask these questions because we must first confirm that the AirPort Extreme works properly until we can begin to troubleshoot the connection to Time Capsule.
-
Opening links in a new tab will also load the link on the problem of temporamental currnt tab that comes and goes. Sometimes using links from google as well. Never had this problem before. Also the SafeSearch feature on google has itself locked on strict, not too much problem, but has happened at the same time my links and tabs not working like I want.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
Having problems capturing the image with 2 cameras and the PCIe-1430
I have problems of switching between my two cameras and breaking or capture images in Labview or MAX. I can switch between cameras and capture images very well so that in the Vision Development Module, but not in Labview or MAX. However, it does not work the first time I have capture an image of a port, but not after that.
This the error I get LabVIEW:
1074397150 error occurred at Snap.vi IMAQ
Possible reasons:
NOR-IMAQ: A timeout error has occurred while you wait for it
specified event. If you expect a picture, check that all the videos
data are acquired during the period. If waiting for a
signal, check that the assertion of signal occurs within the time limit
period.This error I get from MAX:
The IMAQ error
Error 0xBFF60022
A timeout error occurred while you wait for the specified event.
If you expect a picture, make sure all video data is acquired
during the period. If you wait for a signal, check that the
affirmation of signal occurs within the time limit.The following list is what I currently use:
1 card PCIe-1430
2 cameras JAI Pulnix CM-140MCL
LabVIEW 9000 f3
Vision Assistant build 20090611041452
MAX 4.6
NEITHER Vision 9.0
IMAQ 4.3
-
Not enough disk space (428 and 488 event id)
I have 3 servers,
Exchange 2010
TMG 2010
Member Server. (2008)
These entire servers have the same problem, the problem is that I can't install and uninstall anything on it even window update patches cannot be installed on it. On the server exchange and Member roll and functionality cannot be opened and displays the error message. (Exception from HRESULT: 0 x 80070490)
Appear in the event viewer for most event IDS are 428 and 488 (not enough space).
I have enough space on each server, IE more than 40 GB of free space.
Please answer me if there is no possible solution.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
«Problem with access point or wireless adapter»
Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, MariaHI Maria,
· What operating system is installed on your computer?
· You have installed the latest drivers for wireless network card?
Follow the suggestions below for a possible solution:
Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: See these articles for solve wireless problems:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Windows wireless and wired network connection problems
Let us know if that helps.
-
I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.
There are two main reasons for the mistakes of certificate:
- Your computer's time is not set correctly. Check your time year/month/day/hour/minute/timezone/light of day. Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
- The second reason is that Windows XP is not very good for updating root certificates. Go to the following site:
<>http://support.Microsoft.com/kb/931125 >
and go down to the section:
'Update Package root (designed for Windows XP only)'
There is a link, you can use to download a update for your root certificates package. Download this package and double-click it to update.
HTH,
JW
-
I have a problem with the drag (cursor snap) video and audio stuttering!
I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering. my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine. Are there updates or the settings that I can apply to correct this problem?
http://www.eMachines.com/support/drivers.html
The latest drivers/software for your machine come directly from eMachines.
Click the link above for them.
See you soon.
Mick Murphy - Microsoft partner
-
problem with ' law of the administrator. type' and cannot be changed to the user Act.
(this is a PC at HOME, I'm the only person to use it) - after change to the administrator account, problems arise. I can't click and open Excel or Word files on the desktop, I open Excel or Word first, and then recover my files there. So I want to change my administrator account to the normal user account, but it does not allow me to do. I click, click standard - it does not.
I can't find any advantage by using the law of the administrator.
I also tried some methods of Forum - they do not work
So, what can I do to restore my normal user account administrator account.
WaiHar
After change of [my account] to the administrator account, problems arise. I can't click and open Excel or Word files on the office.
-> What exactly happens when you try?
I also tried some methods of Forum - they do not work
-> What methods could they have been?
So, what can I do to restore my normal user account administrator account.
-> There is no need to change your administrator user account.
-> What really makes you think that your account has administrative privileges?
-
Problems associated with tours to the iPad and Mac
Hello
I have an AIR-WLC2112-K9 controller with 1250 TOWERS, customers could connect without problem a few weeks ago, most of the customers are towers, some are Mac and a little
are iPads.the security is WEP encryption.Suddenly the ipads could not associate with towers, a message appears on the passwords, but passwords are correct, temporarily I solved the problem
After changing to WPA - PSK, but the next day the problem came once more. With Mac, the problem is that they can't rally or many abandons the connectionIn my case one having a RIDE and I have no problems, I can associate whenever I want, and also other towers.
I intend to upgrade to AIR-WLC2100-K9-6-0-196-0.aes but I don't know if this will solve the problem.
any suggestion?
Have a read of this:
http://www.Cisco.com/Web/software/wireless/deferral/Software_Advisory_6_0_196_0.html
If you upgrade to a higher version of firmware, Cisco recommends 7.X.
-
problem installing windows 7 finishing installation scope and freeze for hours please help
problem installing windows 7 finishing installation scope and freeze for hours please help
my pc req:2 GB of ramNVIDIA geforce 210 1 GB180 GBPentium 4 3.40Help, pleaseTurn off the computer.
try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.
Log, click Start, type Device Manager, press ENTER.
Expand graphics cards
Right-click your video card, click on uninstall.
Restart your system
Log, click Start, type Device Manager, press ENTER.
Expand graphics cards
Right-click your video cardDriver update software; then click search automatically for updated driver.
-
Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.
Hi Chaz,
I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.
Please answer these questions to get a better understanding of the issue.
1 have changes made to your computer before this problem?
2 shut down other applications while they are in use?
3. do you get an error code?You can try these methods to check whether the problem is resolved.
Method 1: Run the troubleshooter of app.
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Open this link to launch the troubleshooter.
Method 2: Update the application.
Method 3: Reinstall the application.
This link has the steps that you can follow to update and reinstall the application.
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
Feel free to use the forum for any other issue of Windows, you may have.
-
I bought two Lightroom... One for Mac and one for Windows but Mac gives me problem... it happened in judgment and now it won't open upwards - and how that I associate my Mac purchase at a monthly payment as my Windows plan? Its a plan of photography by Adobe (including lightroom and photoshop)
Hi Robertc70810949,
It is a digression of your technical question, but you haven't purchased two separate subscriptions for creative cloud? You are probably aware of this, but just in case you're not, a single Plan of creative photography cloud allows installation and activation on two computers. These computers can be two Macs, two windows, or one of each. See Adobe Creative Cloud FAQ for more information. Of course, you can have another reason to buy multiple subscriptions, but I wanted to clarify in case you can save yourself a little money.
Kind regards
Del
-
I have paid the monthly fee and have been using Acrobat Pro DC. I had a problem where I broke my previous laptop and want to continue to use this product. I bought another laptop, and I don't know how to download the program without having to pay again. I pay $14,99 per month for this service, how can I download it without having to pay again?
Hello
Please download Acrobat Pro ms of the here. After you download the application, install and activate it by providing your Adobe ID
Thank you
Abhishek
-
I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!
I have an idea, I think that what's happening is the fact that the video is not charged, it cannot find the video, he goes to the last downloaded part.
Maybe you are looking for
-
How can I get a reasonable speed on sending / receiving messages
I am in the process of upgrading from a Pentium 4, Windows XP Home (SP3) Intel Core i7-4770 system running under Windows 8 (x 64). At the same time I'm looking into the possibility of changing my e-mail program Thunderbird. I installed Thunderbird 24
-
but whenever I check the speakers he always says that this device does not work correctly
-
How to reset a password in a used laptop?
I have a laptop computer, and I need to reset the password, log in. Can someone help me?
-
virus with XP Antivirus 2008 PC-Vista problem laptop problem
Yes the guys that I got scammed by vista 2008. It's on my PC and my pc can access net, but it will be prohibit me access of malware or dell site forum. Suggestions for my PC cleaned and operate? Hi guys, I literally need help immediately. I opened an
-
Client VPN cannot get inside the network
The VPN client connects to the 2600 on the serial interface, should be able to get to the 10.10.0.0 network beyond 192.168.1.14. The customer ping responds failure of external serial interface address.