Problems of BIOS X100e with device Gobi 2000 WWAN

Similar Questions

• Gobi 2000 wwan undetected

  tried to install the gobi desert in 2000 on the Tablet, I get the message wwan undetected, where can I find the drivers for it

  Steven

  It probably won't work. WWAN module is qualified for the TPT are Gobi3000, F5521gw Ericsson and Huawei EM600. I assumed that, like the ThinkPad standard, all the other modules are rejected at the level of "BIOS", so even that if you find Android drivers for other cards, you wouldn't be able to get the card working.

  In addition, it is not as easy as Windows to install drivers for the new hardware.

• X100e with WWAN in Australia, how to put in place?

  I just got a bicoeur with WWAN Gobi chip x100e.

  When I run the Thinkvantage tools - 3G mobile broadband, he asks me to activate Verizon. (I have already inserted the SIM in the slot)

  The problem is that there is no such thing as Verizon in Australia. My carrier is Optus, and I bought a SIM BYO (bring your own) which means it comes with a SIM card, that's it, no drive, no software, no nothing.

  How to connect to Optus then? I know that the AFN and other parameters. Only, there is no software in the x100e run to connect.

  I am really impressed by the information / software provided in the x100e as I am with his material.

  I of course will ring support phone but now it's midnight and I hope that someone above Lenovo can give some advice.

  Hi midnight BobbyLe and welcome to the Lenovo user community!

  Check the solution to this issue:

  http://forums.Lenovo.com/T5/ThinkPad-edge/ThinkPad-3G-WWAN-no-good-faulty-marketing/m-p/243775#M682

  And this knowledge base article:

  http://forums.Lenovo.com/T5/ThinkVantage-Technologies/configuring-mobile-broadband-with-Gobi-2000-OU...

  I hope this helps!

• E120 Lenovo Edge - cannot detect the WAN of GOBI 2000 map

  Hi, I hope someone could help.  I bought an E120 that my country does not see the X120e

  I bought a card WWAN of GOBI 2000 dealer of Lenovo.  The card passes through the white list very well although it is not mentioned as one of the taken WWAN devices supported.

  I tried to install the 7xwc48ww.exe (drivers X120e and Edge 11 WAN) to see if it would work.  The GOBI loader installs, but the driver does not load, sense - in device - PORTS - Gobi charger Manager

  -In device - network adapters - No. Gobi WAN Card Manager

  I also tried the solution-http://curiouslynerdy.com/2009/05/qualcomm-gobi-wwan-card-on-windows-7/ , but still no joy.

  According to me, the X 120 and E120 are very similar, so I guess the Gobi WAN should be able to work.

  Can anyone suggest an alternative?

  Thank you very much!

  The E120 Edge is like the X121e GOBI 3000 or F5521gw will work. I tried a GOBI 2000 in my E120 with the same result as you.

• XPS 15 (9530, end 2013)-problems of childcare facilities, USB device is disconnected

  Hello

  I got the XPS 15 (9530, end 2013) a few days earlier with widnows 8.1 installed on it and since day 1 I'm running into a weird problem. All my USB devices keeps disconnecting. If its my phone (HTC a M8) or my portable hard drives. I tried several cables and the result is the same.

  I tried to connect all the devices on the different laptops and they work very well except for my laptop. One thing that I know you guys is that if I have my phone connected with the laptop, it charges great however, I am unable to navigate any file on my phone because it keeps disconnecting.

  Any help?

  I could solve my 9530 Dell USB connection/disconnection problem with this combo.

  BIOS A05
  www.sendspace.com/.../pxu1y0
  Use a real lightning cable Apple Original

• Email rec'd 'a device began synchronizing with devices connected to your Firefox account' Please explain

  What is happening with my account of Firefox? I received an email as follows: «a device started syncing with devices connected to your account in Firefox» If there is a security problem, Firefox's history on all my computers. Please explain what is happening here quickly. I think I'll remove the Firefox browser everything and start over with someone else. I can't take risks with my information.

  This isn't a security problem. With the team of Mozilla Sync, I have confirmed that it is an email waiting turning Sync in Firefox on a new computer, tablet or phone. In the future, they will cease to send this type of email to avoid worrying people.

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• HP 2000: How to remove bios password on a hp 2000

  How can I remove bios password on a hp 2000

  Hello

  The password screen, press enter 3 times and you will receive a 'code to stop' - post returns with this code.

  Kind regards

  DP - K

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• problem ejecting usb mass storage device

  After the synchronization when you try to eject the ipod's message problem ejecting usb mass storage device

  Are eject you using the eject of the iPod in iTunes?

  If you do not have the case, restart the computer with the always-connected iPod.  After reboot, this problem persists?

• problem of sudden wifi with iphone 4S

  Hello

  a few days ago, my iPhone 4S does not receive more an IP address from a DHCP server, even for all the WIFI networks, with that I use for work.

  WIFI authentication is OK, but is never received from IP (or other information received from the DHCP server).

  Someone at - he already experienced this?

  Any idea?

  Already used the 'forgotten network?' and enter the parameters for connection a couple of times, same result.

  Thank you very much

  Dominique

  Hi dofas,.

  Here are a few troubleshooting steps for the problem you are having with your Wi - Fi connection.  I've highlighted some key information.  Click on the link for more details.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  Still not connect?

  Reset your network settings. Tap Settings > General > reset > reset network settings. This resets also Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before

  • If you are connected to a Wi - Fi network, but you can't get online, try to use your Wi - Fi network on other devices. If you can't get online using your other devices, there could be an interruption of the service. Call your internet provider cable or the assistance company.
  • Try to connect to a Wi - Fi network in a different location. If your device can connect, you will need to get help with your Wi - Fi network. If it cannot connect to Wi - Fi networks, contact Apple.
  • Update your Wi - Fi router with the latest firmware and check that the router supports your Apple product. For more information, contact the manufacturer of your router.

  Recommended settings for the WiFi routers and access points
  https://support.Apple.com/en-us/HT202068

  DHCP

  The DHCP Dynamic Host Configuration Protocol () assigns addresses that identify devices on your network. Once awarded, devices use these addresses to communicate with each other and with computers on the Internet. The functionality of a DHCP server can be considered similar to a telephone company distributing phone numbers, that clients then use to call other people.

  Value: a single DHCP server by network

  Details: There is only one DHCP server on your network. This DHCP server can be integrated into your modem cable or DSL, a stand-alone, or integrated into your router Wi - Fi router. In all cases, only one device should act as a DHCP server on your network. If several devices has activated, you will probably see to address conflicts and issues of access to the Internet or other resources on your network.

  Take care

• HP Pavilion 17: keyboard problem after BIOS upgrade

  This isn't a terribly troubling problem, but I will mention it if HP is the reform of systems of thought from these forums.  I recently downloaded and applied the update of the BIOS HP with HP Support Assistant.  After, my keyboard does not work on the login screen Windows 10.

  I connect using a PIN code but can no longer enter the PIN code using the keyboard.  The figures of the 'line' number work very well, however, and as soon as I'm connected, the keyboard works normally.

  And, Yes, I have switched Num Lock

  Plug the power adapter.

  Press the power button and then press the ESC key.

  Now, press the F2 key to enter the interface of PC Hardware Diagnostics UEFI.

  

  Select the Firmware management

  At the next screen, choose BIOS Rollback.

  

• Problems of internet connectivity with Dell Inspiron 7520 (1703 of Dell Wireless 802.11b/g/n 2.4 ghz)

  Hello

  I bought a Dell Inspiron 7520 for a week now, and I had a strange problem with internet connectivity since then. First, wifi takes a lot of time to connect. After, I'm online, every 10 minutes my network access stops working completely. But if I click on the network icon in the toolbar, it starts working again, but it stops in the next 10 minutes, once again, and so on. If I try to fix connectivity problems, he always find and solve some in the network card or wireless, but then point again, after 10 minutes, or so, it happens again.

  My network card is a Wireless Dell 1703 802.11b/g/n 2.4 ghz and I tried to update and to re - download the firmware, but nothing seems to fix.

  What should I do to fix this?

  Hello friends. Recently I came across the same problem identified by many with a Dell Inspiron 15R laptop 7520 with the Dell Wireless 1703 (Atheros chipset). After losing an entire afternoon and looking at forums and their complaints, I think that I found the solution to the problem (at least, here is running).

  The laptop is connected to a router TP-Link TL-WR740N. The router is configured to run with a frequency of 20 or 40 MHz, making the switch automatically in the factory. The mobile card wireless driver is configured to work only with 20 MHz at the factory. But can be configured to work with two frequencies is adapted automatically. To do this, change the configuration (in Windows 7):

  Start > Control Panel > Device Manager > network adapters > Dell Wireless 1703 802.11b/g/n (2,4 GHz) > click the Advanced tab > select 802.11n bandwidth. Change the value of Auto 20 MHz / 40 MHz.

  Press OK and wait for to reconnect you.

  I hope this helps.

  Jeferson Vasconcellos

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

  Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
  I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

  I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

  However, FixIt said that he was unable to solve the problem and discs are still read.

  I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

  Any ideas?

  Thank you!

  Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.