Problems of DNS DMS version 5.2

Similar Questions

• Problems of DNS with RV082 and OSX Lion

  Hello

  I have a problem with DNS resolution, using a Mac and a router RV082.

  I use the Google DNS, it manually until 8.8.8.8 and 8.8.4.4

  The simpton is that DNS resolution is slow or fails in the Mac App Store, Firefox, Safari, etc.. I once solved this in hard reseting the RV082 and get to the page were it ask a firmware and does not work until you download the firmware.

  I did this same procedure, but no longer works. Everyone knows this too?

  Thank you

  Oliver

  Hi oliversl1,

  Thank you for posting. Please provide additional information:

  1. What type of internet connection? (Cable, DSL, T1)
  2. No matter what Windows PC? If so, it works ok?
  3. A new hardware version 3, is the RV082? If this is not the case, do you know how old he was?
  4. What version of the firmware?

  Please as well see the following:

  https://supportforums.Cisco.com/thread/2022782

  We also had a problem with Mac computers and RV0xx which has been tentatively scheduled by a downgrade of firmware. I think it was firmware version 1.3.12.19 - tm who had problems with the Mac.

• When I click on the right botton I see a small copy of the browser page. This problem on the new version of mozilla. This problem is not presented on 15 version of mozilla.

  When I click on the right botton I see a small copy of the browser page. This problem on the new version of mozilla. This problem is not presented on 15 version of mozilla.

  I think that you run two versions;

  The details of your system to watch;

  Shockwave Flash 14.0 r0 * Shockwave Flash 13.0 r0

• problem with DNS on the active directory server unique

  I have a client that I'm having a problem with DNS that they do not have active directory structure.  I tried just about everything and at my wits end.  Customers can get online, but the problem is that they cannot see the DNS.  Any help would be much appreciated.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Problem of DNS in Windows 7 wireless connection

  New computer laptop gateway with Windows 7 was to connect to the internet for a month, until a few days ago, when I started to lose the wireless connection often. The only solution was to wait that it will eventually reconnect again. Other computers are connecting wireless with no problems. I get a message that it is a problem of DNS server. He usually tells me that I am connected to the wireless but the connection between the router and the internet is broken. Wired works fine. Suggestions?

  Hi lisina10

   

  You can follow the steps below to check the NIC in Device Manager.
  You can check if you have any exclamation point beside the devices listed. If you have, then there is problem with the card is installed.
  I suggest you to uninstall and reinstall the NIC drivers and check:
  a. click Startand then click Control Panel.
  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  c. in the NIC, expand adapter, right click on the devices listed and then click Uninstall.
  d. When you are prompted to confirm that you want to remove the device, click on OK.
  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically. Check after this procedure if you are able to get access to the network.

  
  You can also check the driver through windows updates updates. Check out the link for additional assistance mentioned in the update drivers below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps.

• Problem with Lightroom RAW Version 4.4 converter file CR2

  I have the problem that my Lightroom Version 4.4 the RAW Format of my new camera (Canon EOS 1200) do not identify.

  The file is a CR2. How to get the RAW directly on my Lightroom Version Converter?

  Hi bjomk,

  Canon EOS 1200 photos are not supported in version 4 of Lightroom.

  You need at least version 5.4 access to raw images.

  For example, you can upgrade to a newer version of Lightroom or Adobe DNG Converter allows you to convert images to DNG and then work on these DNG in Lightroom.

  Article references: supported by Adobe Camera Raw devices

  Kind regards

  Claes

• Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Hi judithl34724699,

  If you want to convert Word files to PDF with the Adobe Reader application then it is possible with the service Pack of PDF. Try to use the service on the web: https://cloud.acrobat.com/convertpdf

  Also try to use a different file type.

  Thank you

  Abhishek

• Too many problems with the latest version of Lightroom

  Hi all

  I have too many problems with the latest version of Lightroom (CC 2015.2.1 1046594)

  In fact, the latest version of 3 or 4 were bad: instead of doing better, I always had more problems.

  So I would like to go back to a previous version of lightroom

  Adobe customar care, in Italy, is unnecessary:

  they can just to:

  -looking for answer on this forum

  -saying "you solve your problems just with the de-insall and re-install it.

  stop, no more...

  in this way they create me a lot fo iusses...

  I use the English version of the PS and LR, but they made me reinstall the Italian version of CC because it has been blocked

  the result was that CC does not recognize software, due to a different language version

  so, I contacted again Adobe Customer Care... they said "no problem, uninstall LR, delete these files and install this...

  I did and I let go 2 years to develop the parameters on the correction of the colors for my clients because they told me to remove a folder, I need!

  so, I ask you now if there is a way to return to a previous version of lightroom, any previous version...

  I never found better performance in more recent versions...

  I've always found, performance slower, more problems...

  personal idea: I do not understand why adobe are boicotting itself, but I think he do!

  Thanks to you all

  Hi ramontillo,

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• I have a problem with the new version of Photoshop CC 2015

  Hello

  I just installed the new version of Photoshop CC 2015. However I have proplem with this version. If I optimize the program, I will not be able to use all the tools, because everything is great, I don't have the problem with the old version.

  I hope for a solution...

  Go to Preferences > Interface > user interface scaling and see if 200% is checked.

  If so, uncheck the box and see if that fixes the problem.

• I have problems to download trial versions. ask again me to confirm e-mail and even if I do nothing will download.

  I have problems to download trial versions. ask again me to confirm e-mail and even if I do nothing will download.

  Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

  You can also download trial directly by that site from the links below.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  http://prodesigntools.com/tag/DDL

• VMWare HA issues / problems of DNS ESX3.5.0U4

  Hi guys,.

  I have the following problems with my VMWare farm.

  VMWare HA:

  I have setup a HA Cluster where I wanted to add two hosts (HP DL585). One installs and configures the HA Agent without any problem. Else we come up with an error message (not enough resources...).  My quality of configured failover is 1 with VC saying I got 0 for the moment. Reservations are not made on only VMs. Strict admission control is turned off.

  There are currently only a single machine virtual on this cluster, which is a virtualized VC, so I didn't get the chance to disable and configure HA

  I read that it was a problem some time earlier with U2, but I guess this should be fixed now...

  Another point is that I have problems with DNS. I have two connections in service at the present time console, one in my backend for iSCSI Connections with IP VMKernel 10.0.0.1/8 and one for management with 172.16.1.180/24 for the frontend. In my opinion the iSCSI SC didn't need to have a connection to the gateway (172.16.1.1) because it is only for an iSCSI SAN in the backend and will be forever. When I try to ping my DNS servers of the console ESX (172.16.1.180) he's trying this address of 10.0.0.1 ping... Do I have to fill my separate LANs to get a connection to iSCSI SC to the bridge or what? Sounds a bit insecure...

  Thanks for advice or comment on that.

  See you soon,.

  Timo

  In this simple case use files static hosts on ESXs and VC with the only front-end SC.

  André

• EA6350 - strange problem with DNS on some devices.

  My EA6350 has this strange issue where some devices, not all, are struggling to get the DNS, and I have to go back and manually configure DNS servers (I am on Comcast, so I use Comcast servers) in each unit carried out in order to get an Internet connection. (i.e., I need to replace the 192.168.1.1 provided by DHCP from the router with 75.75.75.75/75.75.75.76).  Looks like its something to do with some of my devices do not love how DNS gets proxied through this address by the router.  I've seen him have a problem on a Win7 PC, a PC Win10, a chromebook, an Xbox 360 and a couple of smart TV, but it seems not to be a problem on iPhones, iPads, a phone Win10, Win10 tablet, an other PC Win7, and one an Xbox.

  I tried to do a factory reset and reset of the router and flush the DNS cache on the device that would allow me to do, but nothing helped. My firmware is updated.  I also tried to set the static routes of the DNS on the router and that doesn't seem to help either.

  The interesting part about this is that it hit all of the devices in my house, just a few and it seems to be more prevalent on cable devices.  From what I can tell, the router receives its DNS Comcast very well (and as I said, there are a lot of devices that work).   Has anyone else seen anything like this?

  I think I solved my problem.  I did a factory reset on the router and don't update the firmware and now everything seems to work for all devices, even the most problematic.

  2.1.1.168234 is good.

  What that either version is later that it has problems.

• Problem upgraiding new iOs Version

  Greetings!

  Please help me, im having a problem with the download to update my iOS version larest do I need to have enough memory for this? My current memory space is 797 MB. How much it would be for the memory so I can finally upgrade to the latest version.

  Here I have attatched a screen shot based on the results of the failure of the aftert to install the new version of the iOSthank you.

  You try to live update?  Try to install by connecting to a computer using iTunes. Who will save storage during the upgrade.

  This link explains how update via iTunes: update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  Upgrade to iOS 10 requires a lot of free space:

  https://www.imyfone.com/iPhone-space-saver/iOS-storage-management/

• I installed the latest version of Firefox and it does not connect to any Web site. I had no problem with the previous version, I used.

  Can not connect to any Web site.

  texhusky Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• Why doesn't Java Deployment Toolkit (click-to-play) is blocked, as the referenced bug is closed and there is no security problem not known in Version 7 U51?

  In my view, it is important to block insecure addons. But if you do it should be an open bug assigened. The bug referenced to this add-on is already resolved, so I do not know why this plugin is disabled. https://Bugzilla.Mozilla.org/show_bug.cgi?id=636633

  I have the problem that I want to use Secure_Auth that uses the Deployment Kit Java of nasty (via javascript) way that firefox does not see the deployment kit must be started. This is why I have not expected this plugin still for this web site. Since there is no available documentation how to do this configuration in a config file that I'm stuck at the moment.

  I'm a little surprised liitle which blocks all versions (same secure versions) is a way to get a good user experience.

  Concerning

  Martin

  MG_DAU,

  Why do you think that the problem is caused by the block of Java Deployment Toolkit, not Java itself? See http://www.java.com/en/download/faq/deployment_toolkit.xml and this document I found with a google search:

  • Oracle Java blocking the Java Applet of SecureAuth due unsigned Java components

  For general information on the use of Java on trusted sites, see:

  • How to allow Java on trusted sites
  • The Java plugin to view interactive content on Web sites