Problems of internet connection of Bluetooth with Nokia 6680

Hello

After a reinstall of Windows on my laptop Portege R200, I'm not able to install a new connection using the connection from the bluetooth stack Wizard more. This only happens for the express installation of the battery, I want to do for internet connection. Connect bluetooth to your mobile generally is working, as it is the Nokia PC Suite application. Re-install the software doesn't seem to work.

Test a little, I discovered the following:
-L' Connection Wizard (either automatically or manually) is not mobile and authentication works without problems as well. But after this step, an error message appears saying that the connection cannot be established
-If I use manual mode to create a connection error occurs after you choose the COM port
-At the manual installation: if I use some other than 40 COM-port, the error no longer appears and it continues with the installation of the modem
-Use of the program of COM Local Bluetooth to add a port, I get an error of creation of the port COM-40, too
-40 COM port is not used by another application

No idea what could cause this problem?

Hello

Did you use the Bluetooth connection before the reinstallation of the Windows operating system?
It was working properly?
Unfortunately I do not have a Bluetooth specification, but I recommend you to download the latest version of battery Bluetooth m.
Check out this Web of Toshiba Bluetooth site:
http://APS.toshiba-tro.de/Bluetooth/

You will find a lot of descriptions.

Tags: Toshiba

Similar Questions

  • I can't connect my Bluetooth headset Nokia BH-111 with my laptop ASUS X501CA (using BT 4.0). Help, please!

    I can't connect my Bluetooth headset Nokia BH-111 with my laptop ASUS X501CA (using BT 4.0). I tried to add to the device several times in the Panel, but the PC still not able to find the helmet.

    Hello

    1. are you able to connect other devices bluetooth on your laptop?

    2. are you able to connect Nokia BH-111 on other PCs?

    I suggest you follow these items and check if it helps.
    Why Windows is not find my device?

    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    If the problem is only specific to Nokia BH-111, you can also check with Nokia supported

    Let us know if it helps.

  • Problems of Internet connection with a Satellite Pro A120

    Hi, I do not know if someone can help me, but I thought that it was worth a try, because I'm desperate.

    Basically, I can't here online with my computer.

    I am currently away from home, back to my parent's House. I usually am on AOL dialup, they are on the same but with broadband, and until last night, I managed to use their connection high speed without any problems.

    I've updated my AVG, and did an update windows yesterday.

    Today while I was doing something, my screen AOL flashed upwards (disconnected) but I thought nothing of it, until what I tried to get online this afternoon.

    Now, while I'm connected to broadband including wireless router controls and I said that I have a strong connection, I get up then a message of not being able to get an internet connection when I actually try and connect. I don't know if it's AOL or the computer, but because I can get on AOL by using the computer, my parents, I guess to it that I don't see that I did something to stop this connection.

    When you try to sign in to MSN messenger I'm also coming with a message that says that my DNS is unable to resolve my IP address. I don't know if that makes no sense?

    I tried to rebuild my log in the location using the AOL software, but it makes all the difference.

    If anyone has any suggestions as to what could happen, or better yet how to solve, I would be REALLY grateful.

    Thank you

    Kat

    First of all, you must check if one of you firewall don t lock you internet connection.

    In addition, you need access to network connections and in the LAN and WLan connection, you should check the general tab-> settings/properties of Internet Protocol (TCP/IP).
    All (IP, DNS, Getway, etc.) must be set to automatically obtain the address

    Last but not least, it would be appropriate to delete your AOL profile and configure everything again.

    Good luck

  • Problems of Internet connection with Windows CE 6.0

    original title: frustrated

    I have a netbook with windows ce 6.0 and I tried each troubleshooting method that could think about my internet provider which is clear. The problem is when I'm at work I can use wifi there without any problem, but at home I can't all internet so the end result is clear wireless telling me that they do not support windows this. I know I'm not the only one with windows this or the one trying to get on the internet.

    Hello

    ·          You use a router to connect to the internet?

    ·          If Yes, have you tried if internet connection work when it is connected through an Ethernet cable?

    Question suits you best in the MSDN forums.

    http://social.msdn.Microsoft.com/forums/en/category/EmbeddedWindows

    Diana

    Microsoft Answers Support Engineer

  • Problems of internet connectivity with Dell Inspiron 7520 (1703 of Dell Wireless 802.11b/g/n 2.4 ghz)

    Hello

    I bought a Dell Inspiron 7520 for a week now, and I had a strange problem with internet connectivity since then. First, wifi takes a lot of time to connect. After, I'm online, every 10 minutes my network access stops working completely. But if I click on the network icon in the toolbar, it starts working again, but it stops in the next 10 minutes, once again, and so on. If I try to fix connectivity problems, he always find and solve some in the network card or wireless, but then point again, after 10 minutes, or so, it happens again.

    My network card is a Wireless Dell 1703 802.11b/g/n 2.4 ghz and I tried to update and to re - download the firmware, but nothing seems to fix.

    What should I do to fix this?

    Hello friends. Recently I came across the same problem identified by many with a Dell Inspiron 15R laptop 7520 with the Dell Wireless 1703 (Atheros chipset). After losing an entire afternoon and looking at forums and their complaints, I think that I found the solution to the problem (at least, here is running).

    The laptop is connected to a router TP-Link TL-WR740N. The router is configured to run with a frequency of 20 or 40 MHz, making the switch automatically in the factory. The mobile card wireless driver is configured to work only with 20 MHz at the factory. But can be configured to work with two frequencies is adapted automatically. To do this, change the configuration (in Windows 7):

    Start > Control Panel > Device Manager > network adapters > Dell Wireless 1703 802.11b/g/n (2,4 GHz) > click the Advanced tab > select 802.11n bandwidth. Change the value of Auto 20 MHz / 40 MHz.

    Press OK and wait for to reconnect you.

    I hope this helps.

    Jeferson Vasconcellos

  • Internet connection sharing: "Bluetooth network connection" does not appear in the list "Home Networking connection."

    Hello.

    With Windows 7, I want to share the network connection Wi - Fi with Bluetooth through PAN (Personal Area Network).

    When there are several connections in addition to Bluetooth after opening "Share" tab, I see these connections in the "Home Networking connection" list, but there is no Bluetooth. Then, when there is no connection in addition to Bluetooth which I can share with, there is no tab "share."

    Equipment: laptop Samsung NB30:

    • Broadcom BCM2070 Bluetooth 3.0 + HS USB Device with the driver PAN ('Bluetooth device (Personal Area Network)") provided by Samsung: Microsoft, version 6.1.7600.16385, 21.06.2006

    As I assume there should be means to somehow add "Bluetooth Network Connection" to a list of connections that can be internet shared with.

    Also, when I tried to fix this problem manually, other questions are raised:

    • There is really no Thoubleshooting guide for Internet connection sharing in Windows 7? I see this document on the site "Microsoft Support" for Windows 98SE, Windows XP - but not Vista and 7.
    • When I'm stuck to the administration of the system to the GUI, there is good decision to guarantee a target with the CLI. After searching a command line installation Internet connection sharing, I see no guides for this - only something likehttp://forums.devshed.com/windows-help-34/enabling-ics-under-command-line-89499.html . Is there really no way to set up ICS by command line and I'm forced to use complex GUIs?

    So, please help me solve problem BT PAN ICS. But if you reply to other questions, it will also be interesting to read.

    Hi LeoniusLeonius,

    Here are a few articles using Windows Internet connection sharing (ICS) you can do refers to.

    Using ICS (Internet Connection Sharing)

    http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

    Set up a shared Internet connection using ICS (Internet Connection Sharing)

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

    Change the settings for ICS (Internet Connection Sharing) Internet

    http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

    Sharing an Internet connection between multiple computers

    http://Windows.Microsoft.com/en-us/Windows7/sharing-one-Internet-connection-among-several-computers

    Change which computer on your network connects to the Internet

    http://Windows.Microsoft.com/en-us/Windows7/change-which-computer-on-your-network-connects-to-the-Internet

    See if one of the articles will help you in fixing the issue.

    Any sharing via command line for internet connection, unfortunately there is no command available to do.

    Hope that answers your query.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problems of Internet connection on Satellite Pro M50

    The internet on the laptop connects via a network for a connection hub high speed. I know the network hub works as it works with other computers in my house. But my phone just happens with page not displayed all the time.

    I tried to use the system restore and found that some how some drivers got uninstalled so I have re-installed to the best of my ability and it still doesn't work. Then I looked at the settings of internet connection, but they seemed very well so went on the microsoft Web site and found a helps interactive utlity while I download it on my other pc and run it on the laptop.

    Guided Help has had a problem with the virus checker on his firewall so I disabled the firewall and be represented. Now, is he then ran flawless internet Explorer and it would not connect.

    If someone nows how I can solve this problem please contact me

    Thank you
    Darren

    Hello

    Have you tried using another browser? I'm 100% sure that it's simply because of the Internet Explorer settings.

  • Securing internet connection Wi - Fi with Equium L10 and Belkin router

    Hello

    I installed a wireless belkin router on my laptop L10 and have an excellent connection to the internet - everything works fine. However, I would like to secure the connection to prevent indiscreet listening - I tried to do this under the encryption and authentication of the menus, but I'm not sure about the different acronyms used - eg Shared, WEP and WPA for example.

    I tried different combinations of these, but the laptop disconnects just from the router until I return to the connection 'open' standard with encryption disabled. Can someone point me in the right direction... ??

    Hello Dan

    Your router is unknown to me, but encryption is still working on the same path. Check the security settings of your router, then select security options. Set the encryption you want to use (WEP) and the password.
    Your device must be configured as described on this page
    http://LSS.wisc.edu/~Sara/wireless/pcwepconfig.htm

    If everything is done on the right track to avoid any problems. I also use WIFI at home with 64-bit encryption, and I spent 10 minutes for any configuration.

  • Long wait for the Internet connection at startup with Vista

    Basic box Vista my fiance started taking never catch an internet connection at startup. Since the arrival of her office up to the time that the red X little disappeared from the network in its tray icon took four and five minutes. I've tried everything to fix, but nothing has worked. I'm looking through its installed programs that is a bit like the Add/Remove program utility in windows XP THAT and I see what is called Hello. It is the software by Apple, which allows some other software network function. I think it installed when she got her new smart phone and install disks. In any case, I uninstalled Hello, restarted, and bingo!, completed internet connection for about ten seconds after the bureau came. So if you have a similar problem, check your list of programs and search for Hello. Uninstall it and see if it solves your problem of network in Windows Vista. If it doesn't, you can always reinstall Hello, if you really think that you need.

    Thank you for this report and congratulations to solve the problem.

    When I see Hello on a computer, it is usually the result of installation of iTunes.  iTunes uses to find the libraries shared over a network.   If you have a computer with iTunes, you need not Hello.  For more information, see Hello: frequently asked questions (FAQ). Steve Winograd, MS - MVP (Windows desktop experience)

  • Problems of Internet connectivity after an upgrade to Windows 7

    At home I have 2 computers Presario laptops connected to the internet via a modem wireless router / the two using Vista Home Premium (32 bit) OS. Last week I upgraded to one of them to Windows 7 (32 bit) and since then, I had Internet connectivity problems. The other laptop, always on Vista, continues to work with no problems and so I excluded the modem/router wireless as the source of the problem.

    The problem is that when all programs that access the Internet, for example Internet explorer, Mozilla Firefox, Microsoft Outlook and MS Instant messenger, lose the connection to the internet after a few minutes. I disconnect them the laptop to the wireless network and reconnect again manually, then works again for a few minutes and the problem repeats.  An interesting observation is that I use SKYPE (VOIP program) and it is Basel to connect to the internet and maintains the connection without problem.

    I suspect that the problem may be the driver for the hardware wireless (apparently made by Atheros communications) installed on the laptop, but I can't find more information on the subject.

    Any help on this problem will be greatly appreciated.

    Tony Partida

    {Information}

    Hi Tony,.

    It is certainly possible.

    Some people have managed to install this driver Atheros for Windows 7.  It is on the following link.  Save it to your desktop.

    Atheros Driver - Win 7

    The driver is in a zip file.  If you do not have an extraction utility installed, download and install 7-Zip.  Right-click on the downloaded zip file, select Extract 7 - Zip, select the files, and then click Ok.  Open the newly extracted folder, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If it installs successfully, restart the computer and see if there is an improvement in connectivity.

    Kind regards

    DP - K

  • Netflix error code: N8106 106 problem of Internet connection on all my browsers

    Whenever I try to load the Netflix on any browser I get the error Code: connection problem Internet N8106-106.  It says "an Internet or a problem of domestic network connection does not prevent reading.  Please check your Internet connection and try again. "I have no problem with my Internet and 2 other computers on my network even are able to load Netflix very well.  I have the most updated Silverlight and my computer meets all the requirements to play Netflix.  What on Earth is the problem?

    Hello

    I suggest you to try the steps below and check if it helps.

    Method 1:

    Set up your computer in a clean boot state, and check to see if the same problem happens.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

     

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Follow these steps to reset the computer to start as usual:

    (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

    If you are prompted for an administrator password or for confirmation, type your password, or click continue.

    (b) under the general tab, click the Normal startup option, and then click OK.

    (c) when you are prompted to restart the computer, click restart.

    Method 2: Try temporarily disabling the software antivirus installed on the computer and look at the result. You must activate new security that you was disabled programs.
    Disable the antivirus software:
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Hope this information is useful.

  • Causing the problems of internet connection Internet access server

    I have covered a lot of discussions on this issue and have tried all the fixes I found relating to this issue but did not have a chance to find a solution to my problem. I apologize if this is a repeat post, but as I said, none of the questions I found helped.

    ------

    I have 2 laptops (windows 7), 2 xbox 360 s, and smart phones that will all connect to my internet connection with a problem and run great.

    However, I recently bought a PC oriented for the game, and I got this error because I got it.

    I am able to connect to the Internet. Google has always works as Youtube, but youtube videos will stop eventually buffering until I have restart the browser.  Most of the games that I play online will launch and play very well in the beginning, but then they lose the internet connection and not return it until I have close the game and restart it, then it works very well for 5 minutes for an hour, but ends by loses connection again until I got close the game and start it again... However, when games lose connection if I Alt + Tab back on the desktop I'm always connected to the internet and can run my internet browser to always connect to google or youtube... Other sites are also affected (Netflix, Microsoft, Outlook, contraction, etc. all will simply keep the load and eventually tell me 'the site takes long to answer').

    I tried the update of Device Manager, but it says it cannot find the updates for the server to access Internet with yellow Triangle /!

    In the currency manager<><>
    "The drivers for this device are not installed (Code 28)

    To find a driver for this device, click Update driver. »

    When I click on "put updated pilot."

    "Windows was unable to install your Internet access server .
    Windows found driver software for your device.

    If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

    However after visiting the Linksys website, the only thing close to that I found was to update the firmware, which I did, but was still does not solve the problem, and I can't seem to find everything related to the Internet Access Service.

    I then tried calling Linksys (router Linksys E1200 series), who directed, I call my ISP, which then make sure that my drivers are up to date.

    At the beginning I was not able to check for an update for access to the Internet Server (all have been 'grayed out' and unclickable).  However after clicking on "Devices and printers" under the start menu, right click router<>

    I tried also to open the command prompt

    I did the "Winsock" fix according to the instructions and an IP reset via the command prompt, always with no success.

    I spent about the last 48 hours trying to get this update with no luck, I finally met a thread with a post that seems to fix the problem for Vista, but I need the version of Windows 7 which has not been registered.  A member of the community had provided a link to download the driver I can't find for the life of me.

    I'm typing this from my laptop (not the PC having problems) and it internet runs fine on this legacy without problems as are all other currencies clung to the same internet connection. The PC in question is the only one that is connected to the router, all the rest are wireless and work very well. (No wireless in the PC with the question card)  If I wired my laptop (with the same Ethernet cable that runs on the PC with the questions) my laptop connects to the internet and always runs very well.

    Any help would be greatly appreciated.

    Hello Dubz,

    Thanks for posting your question on the forum of the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    1. What is your default browser?
    2. What is the brand and model of your computer?

    I appreciate your efforts to resolve the issue.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    If you are using Internet explorer as default browser, then please use the suggestions provided in this Microsoft Knowledge base article and check.
    Reference:
    Internet Explorer does not start or stops responding
    http://support.Microsoft.com/kb/926449/en-GB

    Important notes:
    Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

    The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Also, please use method 2.

    Method 2:
    I also suggest you try the steps in this Microsoft support article and check.
    Reference:
    Automatically get recommended drivers and updates for your hardware
    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • After reset, problems of internet connection due to problems during installation of updates

    Original title: recently reset computer - internet connection problem

    I used hundreds of gigabites and most of it was unknown, so I decided to reset my computer and do a clean install. He started very well, the instalation process.

    But once I jumped on the desktop, I noticed I could download windows updates, but not browse the internet. Just of left me with a white screen without end and says "waiting for google.ie" solve problems no problem, this isn't even not aware that there is a.

    I finally just hoped windows update could solve this problem, so I tried to download and install all updates. He failed and left me in an endless loop of "reboot...". "until I restarted my PC 3times to reboot and installed an other clean.

    Then everything seemed fine, I could browse the internet immediately. I downloaded google chrome, traveled to youtube and finally installed Norton internet security. But when it restarted, google chrome would not meet any time I started and internet explore doesn't load pages, just like before.

    I installed the 100 pending updates immediately, and the problem persisted. It can always downlosd updates to windows, but won't let me access the internet. I really need help, it only happened on this computer before. It may not be a problem with my modem, he's always been compatible

    Installing another batch of updates - 9 of 95...

    This problem is fixed after this last batch of updates, if I were to turn off manually the update screen because pc had glitched. Windows is full of unwanted confusion today

  • If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

    After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

    Hi Pharao-nael,

    I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

    Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
    Configure and use third-party Bluetooth - Apple Support Accessories

    Turn off pairing a Bluetooth accessory

    To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

    When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

    Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:

    Pair your device with a Bluetooth accessory

    1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
    2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
    3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

    When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

    Thank you for using communities of Apple Support, cheers!

  • How long an internet connection to broadband with a speed of 512 Kbps (DSL) should last to download 138 MB?

    Hello

    I have an internet connection broadband with a speed of 512 Kbps.
    So, I think it means:
    512 KB * 60 seconds (1 minute) = 30720 KB per minute.
    Thus, 30720 KB/1024 = 30 MB
    30 MB per minute
    However, I noticed that the 140 MB in the screenshot below took about an hour until they were completed. It was supposed to take four minutes and a half approximately.
    In addition, there is no other applications running while these downloads above are downloaded

    The storage units in the case of networking is different. Please note the difference between KB and KB. The 'b' indicates bits (8 bits is a byte) and 'B' indicates bytes. In the case of networking, data are sent in form of packages, divided into eight parts, bits is used.

    Therefore, 512 Kbps will achieve a maximum data transfer speed of 512/8 = 64 Kbps. 64 * 60 = 3840 KB per minute which is 3.75 MB per minute. On average, it'll take 45-50 minutes to download a 140 MB file. But we cannot wait for the speed of the network to be stable to always, it varies. So it may take more than an hour also.

Maybe you are looking for

  • Satellite L850-12U: various annoying problems

    Hello I have some problems with my laptop Toshiba Satellite L850-12U, purchased 550 on Grosbill in September. It is under warranty! -Bad contact of the battery to the battery can disconnect a moment at any time (a simple light touch is necessary to r

  • How can I get out of the mode of recovery on my nano without restoring

    I have a 4th Gen ipod nano.  Screen went black, I tried to reset (by pressing menu and Center button) without success.  Nano plugged into pc, dialog said in recovery mode, need to restore for nano to work in iTunes, I don't want to restore because I

  • Initialization of controls on the front

    Hello On my front, I have several controls that the user must set before executing the program. The user mostly enters values that each time that on the front before running the program.  Is it possible to save these values in the control on the fron

  • How to create a specific property node w / script of VI

    I am writing a VI script to work with multi column list boxes.  I need to create a property node that gets a reference to the REF field.  I see that I can create a property via the method invoke Create.Property node node node, but how to get the REF

  • Generation of signals (c) FIFO PXI-6225

    Hello. My user requests an upgrade a system existing. I'm an analog input I need to convert to a digital waveform. As the analog input varies, I need to be able to vary the frequency of the digital wave to match. Just recently, I discovered that I sh