Problems of Internet connection with a Satellite Pro A120

Similar Questions

• Installation problems after upgrade the HDD on Satellite Pro A120 (PSAC1E)

  Hello

  I've recently updated my Satellite Pro A120 with more memory and a larger hard drive. The memory I installed is 2 x 1 GB Module (DDR2-667) and the product number of the hard drive is MK2035GSS.

  My computer recognizes both of these upgradges, but since their installation I was able to install all applications (for example Norton Security etc) on my laptop - they seem to spend 1/2 to 3/4 of the way in which the installation process and then just quit smoking and become insensitive or an error message appears. I even tried to put the product recovery disc to try and erase everything and start over but even that does not load in entirely. Any ideas of what could be the cause? Also, I get messages of constant error on the screen and it blue screens and restarts frequently.

  If anyone has any ideas on what could be the cause, I would be extremely grateful for any help!

  Thank you very much

  Cblack

  Post edited by: cblack

  Hello

  just a question, than to the manufacturer that are the memory modules? And similar modules? Or do you have that you have installed other modules later.
  We can exclude the HARD drive because it doesn´t HARD drive installed. they do not cause bluescreens or similar. In very rare cases, the disk HARD COULD cause errors, but then the pladder or BSOD´s must be REALLY damaged and in your case, the HARD drive is brand new.

  It might be, that memory modules are not compatible with your machine. To avoid these incompatibility issues, you must use the modules of well-known such as kingston and toshiba brands. (I'd rather kingston, they work like a charm in my A100 Sat :))

  Would appreciate comments on your part.

  See you soon

• Problems of Internet connection with Windows CE 6.0

  original title: frustrated

  I have a netbook with windows ce 6.0 and I tried each troubleshooting method that could think about my internet provider which is clear. The problem is when I'm at work I can use wifi there without any problem, but at home I can't all internet so the end result is clear wireless telling me that they do not support windows this. I know I'm not the only one with windows this or the one trying to get on the internet.

  Hello

  ·          You use a router to connect to the internet?

  ·          If Yes, have you tried if internet connection work when it is connected through an Ethernet cable?

  Question suits you best in the MSDN forums.

  http://social.msdn.Microsoft.com/forums/en/category/EmbeddedWindows

  Diana

  Microsoft Answers Support Engineer

• Problems of internet connectivity with Dell Inspiron 7520 (1703 of Dell Wireless 802.11b/g/n 2.4 ghz)

  Hello

  I bought a Dell Inspiron 7520 for a week now, and I had a strange problem with internet connectivity since then. First, wifi takes a lot of time to connect. After, I'm online, every 10 minutes my network access stops working completely. But if I click on the network icon in the toolbar, it starts working again, but it stops in the next 10 minutes, once again, and so on. If I try to fix connectivity problems, he always find and solve some in the network card or wireless, but then point again, after 10 minutes, or so, it happens again.

  My network card is a Wireless Dell 1703 802.11b/g/n 2.4 ghz and I tried to update and to re - download the firmware, but nothing seems to fix.

  What should I do to fix this?

  Hello friends. Recently I came across the same problem identified by many with a Dell Inspiron 15R laptop 7520 with the Dell Wireless 1703 (Atheros chipset). After losing an entire afternoon and looking at forums and their complaints, I think that I found the solution to the problem (at least, here is running).

  The laptop is connected to a router TP-Link TL-WR740N. The router is configured to run with a frequency of 20 or 40 MHz, making the switch automatically in the factory. The mobile card wireless driver is configured to work only with 20 MHz at the factory. But can be configured to work with two frequencies is adapted automatically. To do this, change the configuration (in Windows 7):

  Start > Control Panel > Device Manager > network adapters > Dell Wireless 1703 802.11b/g/n (2,4 GHz) > click the Advanced tab > select 802.11n bandwidth. Change the value of Auto 20 MHz / 40 MHz.

  Press OK and wait for to reconnect you.

  I hope this helps.

  Jeferson Vasconcellos

• Satellite Pro A120: How to set a resolution of 1440 x 900 or 1680 x 1050 on external monitor

  Hello

  I'm considering buying an external to use with my Satellite Pro A120 monitor. The laptop has a Mobile Intel 945GM chipset and it doesn't seem as if I can choose the resolution that I would need a widescreen (1440 x 900 or 1680 x 1050), with its menu of graphic properties.

  Is it possible to put one of these resolutions so that I could use an external display, or is simply not an option?

  The drivers supplied with the monitor would be likely to help him?

  Hello Thom

  Unfortunately when you have factory settings you probably won't be able to use these resolutions. I put t know if it's because of preinstalled driver or limitation technique graphics card.

  You can try to install the driver from the manufacturer of the graphics card and see if it will work (Intel or ATI). Just testing everything.

  If you have the time to read this interesting topic http://www.laptopvideo2go.com/forum/index.php?showtopic=9243

• Satellite Pro A120 - what docking station is compatible?

  Hello

  What model of Toshiba Docking stations are compatible with Toshiba Satellite Pro A120. I can't answer this question on google or the Web from Toshiba site.
  Thanks for help.

  Hello!

  Have you checked the user manual? You will find the answer! ;)

  I checked and you have the Toshiba Advanced Port Replicator III. If search you with Google for it, you should find a few online shops where you can buy it.

  Good bye

• Replacement battery for Satellite pro A120

  I need to replace the battery on my Satellite pro A120 and cannot work from the PC, the user manual or this site what types of batteries are compatible with this PC.

  Can anyone help?

  Hello

  On the Europe of Toshiba in the Options box & accessories page you will find the list of compatible options (batteries, etc.) with the Satellite Pro A120.
  Check it!

  In addition, you can order the Toshiba ASP compatible battery in your country!
  They could provide a battery support!

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Problems with disk Satellite pro 4200 hard assembly

  I have problems with a Satellite pro 4200.
  The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

  CU
  Eltgen

  Hi Eltgen

  Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

  It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

• PC Diagnostic tool indicates problem with WiFi - Satellite Pro A100

  Hey all

  Im having some problems trying to connect with my laptop wifi computers.

  Ran tool Diagnostic PC (toshiba) and the result said network fails but gave me no help to identify or reapiring problem.

  If anyone can help?

  Satelittle Pro A100
  Win XP
  512 MB of ram
  HARD DRIVE 60 GB
  ATI Radeon X 1400

  Malc

  Hello

  I put t know what problem you have, but check the status of the WIFI card in Device Manager. After this check, if the card is correctly enabled or disabled. If the map is successfully activated the laptop should be able to see WLAN network. If this isn't the case, I assume that there is a problem with the wireless network card.

  If you want to report us more on your problem.

  Good bye

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• Satellite Pro A120 has network problems

  Mr President.

  I, Jayarajan.C.N, working as an Assistant Executive Engineer in the Kerala State Electricity Board, Kerala, India.
  We had a laptop brand Thoshiba (Satellite Pro A120 type; PTA83L-08L02N model number; SL.no. Y6131B1488H) as part of a package of type brand MD - 2000 Tesient relay.

  We use this laptop for other official purposes also. It works smoothly.

  But we were faced with the following problems:
  1. we could connect the computer laptop in Local Area Networking with other desktop computers and laptop. But we could not transmit or receive data from the other computer.

  2. we could connect us the laptop to the network in ad-hoc mode wireless and the laptop showed the link as 'excellent '. But as in the case of LAN, data may not be transferred or received.

  3. we tried to use dial-up modem to the laptop. But we do not have internet access. The error showed was 'busy line (error 676) '. In fact, the line was not busy.

  4. we checked to access internet using Reliance Netconnect USB modem after installing its software. He also failed in showing the "username & passwords are wrong in this area.

  5. I added an init string in the Toshiba modem commands: AT & FX1. But before that, I made a mistake. I installed the Client Services for Netware. After that, the connection mode was changed. But I don't know how to uninstall "client services for Netware". I selected the account control user - change the way users log on or off, I received the following message: "client for Netware has disabled the display of welcome and quick user agrees." To restore these features, you must uninstall client services for Netware. As I said before, I don't know how to uninstall the same. Now during log on, I have to use ctrl + alt + delete to log on.

  After you have added the string init AT & FX1, I have only seen the modem trying to catch the net until the "veryfying username and password. But he could not catch the net. Please note that I had installed the client services for Netware. I saw that the modem has been "connecting" even after a few minutes and I noticed the system reacted very slowly.

  In short, we cannot achieve any type of networking and by error logging has been changed...
  We ask your advice detailed without delay.
  Thanks in advance.

  Regarding
  DANIELA. C.N,
  Assistant Executive Engineer,
  [email protected]

  Hello

  Please don t be angry with me, but this is a user-forum user and please don t expect magical solutions or answers.
  However, I will try to give some suggestions.

  1.) Please check if you are in the same workgroup or domain and check if you have set the right rights to folders. In addition to check all the parameters of the firewall and possibly disable it please!
  (2) see point 1)
  3.) found a Microsoft document describes this error message:
  http://support.Microsoft.com/kb/187215
  or
  http://Xtra.co.nz/help/0, 5721-2513242, 00.html

  (4) Please check the user name and password. Please note; It case sensitive s

  (5) If you want to remove the Client Service for Netware, click on START/SETTINGS/CONTROL PANEL/CONNECTIONS NETWORK. On your CONNECTION to the local AREA NETWORK right click, select properties and click on it, then highlight "CLIENT SERVICES for NETWARE" and click the "UNINSTALL" below

• Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

  Hi all.

  I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

  I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

  After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

  I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

  I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
  The first onewas ok, everything works. Either everyone has this problem :/

  I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

  Any suggestions what may cause the problem or how to fix?

  I think you should first clarify whether your headset is OK.

  My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

  Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

  If in case the headset is faulty, the speakers and the headphones would not work.
  So I think you should check the helmet first.

  If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
  Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

  The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

  However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

• Satellite Pro A120 (PSAC1E) - TV problem

  Hello
  My laptop "Satellite Pro A120 (PSAC1E)" computer does not connect to any type of TV (digital or analog). I tried many different kind of connections to SCART-VGA to VGA-HDMI. I think something is wrong with the VGA output because apparently the Intel graphic card supports the TV/monitor output as the software driver suggests. However, I can't connect the laptop to an external monitor rather easily and without hassle.
  Someone there has the same problem and if so, do you have a solution to this problem (everything!).

  Thank you

  KAV

  Hello

  As far as I know NOT ALL Satellite Pro A120 PSAC1E are equipped with the video output jack!
  I see you are using an external monitor connector!
  This port can ONLY be used with external display (screen) or a projector, but NOT with the TV!

  The TV can be connected to the s-video port that is not available!