Problems of Internet connection on Satellite Pro M50

Similar Questions

• Satellite Pro M50: Lobos SkyMe internet phone will not be installed when connect you

  I would welcome suggestions for a USB problem.

  A Lobos SkyMe internet phone will not install when it is connected to a USB port, but will install when plugged into my Shuttle PC.
  Historical precedents with the USB ports on this Satellite Pro M50, I'm pretty much at my wits end.

  Apparently, no driver is necessary, but I wonder if there is a registry hack to force recognition?

  Hello

  Could you describe in detail what does not work? You get an error message?

  I m not an expert in internet phone installation and didn t install similar devices in the past, but I imagine that the phone should recognize the new plugged the USB with no problems.

  If there is a problem with the USB device recognition go to Device Manager and remove all the controllers and the USB ports.
  Reboot the laptop.

  After that process, the operating system installs the ports again.
  Then you could try to connect the external USB device to the laptop USB port.

  PS; to make sure that the USB ports will provide enough power, you must disable USB energy saving properties.

• Satellite Pro M50: WLan connection after 10 min lost IP address

  I just bought a Satellite Pro M50.
  I can connect to the router using Congfigfree OK, but after 10 minutes or if she loses IP etc.
  Have refresh the wireless connection to reconnect.
  This continues every 10 minutes approximately.

  Hello

  Thanks for the information updated and nice that it works.
  As far as I know, this option is enabled in power safe during work only with batteries.
  But for better performance of Wlan this sure option should be disabled.

• Drivers of local wireless network for Satellite Pro M50

  Hello

  I inherited a Satellite Pro M50 with a corrupted hard drive. I formatted and reinstalled Windows XP Home.

  I looked for a wireless Lan driver, but the site tells me that no driver exist?

  Help and advice would be appreciated to allow me to connect to internet wirelessly.

  Thank you very much.

  Hello

  The Satellite Pro M50 is an old series laptop.
  You can find the drivers in the field of Archives; in the form of product type choose Archive.

  You can also visit this page:
  http://APS2.toshiba-tro.de/WLAN/

  I think you should the dirver Intel.

• Can not find the audio driver for Satellite Pro M50

  Someone please help. Audio drivers simply disappear from a satellite pro M50 and me tried, do a search in the internet without success.

  Someone please help

  Hello

  Have you checked the page of the Toshiba driver?
  If this isn't the case, then do it!
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Here you have to choose the right unit and you will get all the drivers available for this notebook.
  I checked this page and I found the audio driver XP for this laptop.

  That is why I see no problem ;)

• Satellite Pro M50 is doing weird things perpetually

  Hello

  I come to you in a State of defeat, I have in my care at the present time a friends Satellite Pro M50, Model No.: PSM55E-003001EN, who does BIZARRE things perpetually, I tried to diagnose for a few weeks and am still absolutely perplexed.

  When started after a period of time (for example, be left overnight), the computer turns on, the rotation of the fan disc to the top, but nothing comes on the screen, it is completely blank. If you turn it off and turn back on again immediately, after that it will start and 'messages' as usual. The reason for this is a mystery to me, because it is only a problem the first time that you turn it on after a while to be turned off, then it disappears.

  Secondly, when it does not start XP, half the time that it will work fine until the screen is touched (tilted forward or backward), which either will make return empty (but always backlit), or BSOD. The other half of the time, it will start in XP, but after a few moments enclosing or suffer the cutting issue screen without being hit at all. I also tried connected to an external monitor, where the output seems to have the same behavior as the computer screen (on off the moment when you off/white/frozen etc.).

  Now, I have re-installed times mulitple XP on the computer, and (outside), it will work perfectly well in a base state being moved and tilted in all directions, I can think of trying, until I have install the ATI display driver recommended from the Web from Toshiba or legacy ATI site When the problems about screen clipping and booting into the operating system seem to start...

  I also tried to install a distribution of Ubuntu on the machine, which works properly again for awhile once installation is complete, until the machine is turned off and left overnight, the next day, wherever he hangs at startup 'Ubuntu' screen and does not start despite any number of reboots.

  I ran Memtest and it indicates that the RAM is fine, and the HARD drive was also tested and is in working condition. Now, this does not seem to point me in the direction of a flaw with the graphics chip, but I don't know if it would force the latter to expose ALL of the behaviors that shows this machine...

  Someone at - it advice about these issues? Given the age of the machine and taking into account the cost of a new phone of base, I don't think that it is worth my friend spend money on fixing the thing, I try right here save the dump.

  Thank you.

  I can't say with certainty what the problem but, as Akuma have already written, there must be a hardware problem.
  What you can do about it? You can try to find it on eBay or elsewhere mainboard handed to nine and exchange it in the hope that everything will be OK. Otherwise you can give advice to your friend to save money and buy new laptops.

• Satellite Pro M50: ATI Radeon Mobility 200 - error blue screen

  Hello

  My girlfriend has a Satellite Pro M50, she bought 3 weeks ago about, recently it started to freeze so that in general use (play music, browse the web via wifi etc.) and then it blue screens. The blue display lights only for a split second before disappearing and the reboot of the machine.

  Once he started again I send the error report to Microsoft and it lets me know that he could have the ATI drivers, I went to the website of ati to search for drivers, but for some reason any, that there is none for the mobility of 200 m, I used the drivers from the toshiba to the opposite site and this seemed to solve the problem for a short time , but it's happening now once again, is this a hardware problem or software and what should I do?

  any ideas anyone (specification of machine below)?

  Toshiba Satellite Pro M50
  Intel Celeron 1.5 ghz
  512 MB of RAM
  40 GB HARD drive
  ATI Mobility Radeon 200 m graphics card
  Win XP Home Ed

  see you soon

  Rich

  Hello

  The blue screen occurs due to the failure of the serious software or hardware failure. You the case looks like a hardware problem. As John said in the first response, it could be the graphics card or something similar.
  You guarantee is valid and I really recommend to contact the Toshiba authorized service partner in your country for the control of the machine.
  If replacements are needed this should be done for free because of the valid guarantee.

• Satellite Pro M50 - upgrade RAM does not fit

  Hi, I'm looking to upgrade the ram in a Satellite Pro M50, I bought a stick of crucial but although he mounted in the slot (and was regarded as the correct product) machine didn't post with it, I bought another stick (different brand) and installed this but get the same problem. Looking at it, I noticed that the notch in the existing stick of 256 MB is a bit (a few mm) out against the new stick and of course although they fit into the slot, the actual pins on the stick won't line up properly.

  Is this a known issue? Do I have to buy a specific brand of RAM in order to modernize the system? Crucial guarantee their RAM to work, very unusual that it didn't work that way for this system of tosh.

  Thanks in advace to anyone who can enlighten us!

  GYS

  Hi GYS

  S let speak quite clearly, for RAM upgrade, you must use compatible RAM modules. I hope you know what that means compatibility work.
  So if you want to be sure you are using the right RAM modules and compatible I recommend modules memory live 1024Mo PC2700 to use with the PA3313U-2M1G part number.

  You can upgrade your laptop up to 1 GB of RAM and using two of these modules, you will be able to use maximum RAM and also make sure that the Rams will be suitable for your system.

• Satellite Pro M50: Device Manager displays only 768 MB memory

  Hi all

  I have just rebuilt windows THAN XP on my Satellite Pro M50 and everything seems fine, except that before I reinstalled XP my device manager showed all my 1 025 Meg of memory.

  Now, it shows only 768 Meg. However, Information System shows all Meg 1 025. Any suggestions?

  Thanks in advance,

  Phil

  Hello

  I suppose that the memory was not upgraded. That I myself remember portable Pro M50 shipped with 256 MB + 512 MB modules.
  That is why I see problems with memory. It should show 768 MB.

  Hoe did you check the value of the memory in the system information?

• Re: No Internet on the Satellite Pro C660

  Someone at - he of the drivers from the internet that can run internet on Toshiba Satellite Pro C660? Laptop is preinstalled with Win7 64 bit.

  I put t know what the card is inside the laptop. He formerly Atheros, but now his Realtek, was great work until Windows don't update now no link it just says: limited access, even if there are 5 full bars showing, there is a yellow question mark on it.

  When I run the troubleshooting it indicates a possible driver problem, but if I check the driver it says working properly. I have been using the system restore and disable windows update, but daily updates are coming back and I have no internet again.

  Now the system restore point that I had created that worked went among the dining choices.
  My head is paralyzed.
  Any help greatly appreciated

  D

  Windows updates are listed as important and optional. Under optional drivers are sometimes written drivers for hardware components such as display or WLAN. Please don t install these updates. Install important updates only, and only use the drivers from Toshiba.

  Please send us the name of the full model (C660-xxx) and we can check what cards are on the inside.
  Try it please check the system again restore and turn on show restore points more. I hope that your restore point will be there. Do it, check the functionality and don t install any driver offered by Microsoft Windows update.

• Toshiba Satellite Pro M50 comaptible - tools for WIndows 7

  Hello world
  I own Satellite Pro M50, listed as a model on the official website of Toshiba - drivers and tools provided by Toshiba are only for XP and several of them for Vista.

  I installed Windows 7 32 bit and I am very satisfied with the speed of the computer now. Windows 7 was able to detect my devices (screen, usb, wifi, lan) and drivers updated successfully. Everything seems to work OK now.

  Problem is with Toshiba tools.
  MasterG (to whom I am very grateful, but I have not found a way how to address him directly) advised another user with the old model (M100-221) to use PPV and Flash Card Utility Support for series L500.
  (for more details: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=57586&tstart=0)
  
  I tried, and the utility of Support Flash Card worked. Now, I can use the Fn key.

  There are also a few features Toshiba I would run: Power Saver, utility TouchPad and so on. How could I know what model has tools that could function as a substitute for my only or was it just a coincidence that it worked?

  Thank you very much in advance, and greetings to the whole community of toshiba, I'm really pleased with this support forums.

  Bevo

  Hi Ben,

  It of Nice to hear that you have successfully install Windows 7 successfully on your Satellite Pro M50 and you also like the forum like me. :)

  What tools you want exactly?
  There are a few differences between XP and Windows 7 tools. For example, Power Saver already belongs to a package of added value, and you can find the parameters energy saver in Windows the Windows Management.

  The utility of touchpad you can download other laptops. AFAIK driver Synaptics and Alps Electric should work on all models, but you need to test, I n t have Satellite Pro M50.

  In addition a list of compatible tools does not for me. Just try it.
  Important is that you install Windows 7 versions or at least for Vista. I think that the XP don t work tools.

  Good luck! :)

• Satellite Pro M50 with Vista: how to get the S-video on the job?

  Hi all

  I have a vista equipped Satellite Pro M50. Does anyone know how to get the S-video on the job? I can't understand.

  Inadvance, see you soon

  Phil

  Did you look in the user manual?
  This doc is always pre-installed on laptop and provides useful information. Also how to connect a TV and use simple notebooks ports.

  A hint; You must use an s-video cable to connect the laptop to the TV.
  Then use the FN + F5 key combination to switch between display devices.
  Sometimes the special s-video option must be enabled on the TV.

  I would recommend consulting the manual of the TV also.

  Good bye

• How to connect by Satellite Pro A300-1LW to TV - only monitors VGA port available

  I want to connect my Satellite Pro A300 1LW to the TV to watch DVDs and videos on the internet.
  There is only a single VGA output.

  I have this connected to the input VGA on TV (Sony Bravia LCD TV) and it displays the start-up screens such as the BIOS, Windows startup screen password but fails when the user login screen.

  The television then shows a message indicating "signal not supported.
  Adjust the PC output '.

  Is the complete list of available interfaces:

  1 x DC-in
  1 x external monitor (this is the port that I use)
  1 x RJ-11
  1 x RJ-45
  1 x i.Link (IEEE 1394)®
  1 x external microphone
  1 headphone (stereo)
  1 x SP/DIF (optical) shared with headphone jack
  1 x 5-in-1 Bridge Media slot (supports SD ^ TM ^ memory cards up to 16 GB)
  Stick® up to 256 MB, Memory Stick Pro ^ TM ^ up to 2 GB, MultiMedia Card ^ TM ^ to the top
  to 2 GB and xD-Picture Card ^ TM ^ up to 2 GB)
  1 (shared with a USB port) x eSATA
  4 (2 left, 2 right) x USB 2.0 (USB Sleep-and-Charge of support)

  Have you tested when laptop is not connected and that Vista is fully charged?
  I mean start your laptop and wait for Vista to be fully charged. Cannot connect to the TV, then use the FN + F5 key combination to have the image on the TV.

  It works correctly?

• Upgrade CPU on Satellite Pro M50?

  Is it possible to upgrade the processor on a Satellite Pro M50 to say an Intel Pentium M 755 SL7EM Socket 479 (mPGA479M) or is the BIOS locked to accept only Celeron M 350J, 360J, 370, 380?

  You should first check chipset compatibility.
  IIN case the chipset would support the new processor, you have a good chance to get the laptop works properly.

  I think the old series M50 Intel 915 PM/915GM/910GML chipset support.
  So, theoretically the
  -Intel Pentium-M Dothan (725/730/740/750/760/770) 1.6 GHz, 1.73 GHz, 1.86 GHz, 2.0 GHz, 2.13 GHz
  and
  -Intel Celeron-M Dothan (350J, 360J, 370) 1.3 GHz, 1.4 GHz and 1.5 GHz
  should be compatible.

  But be aware that portable upgrades from manufacturers don t support the CPU.
  So no one can tell which device is supported by the BIOS.

  Also, the Pentium CPU would create and produce more heat and this may affect the functionality of the laptop. In the worst case system and the RAM would be crashes due to the higher temperature.

• Satellite Pro M50 - need MODEL number

  Hello world

  I'm new to this bear so please with me. I'm looking to sell my Satellite Pro M50 and need model number to the list correctly.
  Where can I find this number, you can.

  Thanks Keith.

  Hello

  Did you look on the bottom of the unit?
  Please do.

  There should be a label that contains the serial number and model.
  If you need the hardware specifications of notebooks and then use the model number and google for more details
  I sure that you will find at the Toshiba m product page