problems of metadata with link Public

Similar Questions

• Problem compiling AIR with linked files

  I am trying to compile an AIR application in Flash Builder 4.01; The project has related files.

  I am able to compile in Flash Catalyst to AIR without any problem. But when I try in Flash Builder to export the compiler as an AIR application hangs and does not compile. All embedded components work smoothly if I compile without adding assets and images. If I "Select All" I can click Finish as many times as I want and nothing happens.

  Does anyone know why this might be happening?

  

  Thank you

  Eric

  Hello

  Flash Builder has a limit known with linked files.

  Please put your assets in a new source folder (project properties-> Flex Build Path-> Source path-> add a folder, point to an external folder).

  Unless it is a 'source' folder, the compiler ignores the assets in these files during the export.

  Thank you

  Rémy

• Problem blackBerry software with link BB when syncing with BB Q10

  I've been using link BB 1.2.3.56 on one of my PC for 8 months now, but a particular type of behavior has recently developed.  After connection Link tries to synchronize the calendar and other data and then a pop-up window will appear as follows:

  ---------------------------
  Microsoft Visual C++ Runtime Library
  ---------------------------
  Runtime error!

  Program: ...es\research in motion\blackberry link\BlackBerryLink.exe

  This application has requested the execution to terminate in an unusual way.
  For more information, contact the application support team.

  ---------------------------
  Ok
  ---------------------------

  I tried to repair and reinstall same link, but the problem persists.  Any ideas?

  Thanking you advance a solution.

  OK, so the operating system is WIN 7 SP1 and Visual C ++ could be 2005, 2008, 2010 and 2013.  I don't know you are using.

  Some programs have been installed before the fault that appear, but some have been uninstalled.

  I was encouraged to re - install Link, but this time I checked the box to delete the existing settings so that the later installation would be "clean".

  It worked, so that some of the settings were incorrect due to the Elimination of some programs that are accessible by link.

  I would recommend to all those who have problems of this type link check the deletion settings to uninstall because clearly this would cause the link to fail if anything here is false.

  Thank you for your time and I hope that it will be useful to others.

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• InDesign on Mac with OS 10.8 CS6 have problems with links

  Hello

  InDesign on Mac with 10.8 CS6 have problems with links. All links to other files need to be updated when you open a file, although absolutely nothing has changed for linked files.
  We can exclude the networking of business and the system hosting the files (software on RedHat Linux VM HELIOS). This happens with the Indesign files newly created and 'old'. For example, we create a file Tuesday, save it and open it again on MAC same exact Wednesday and all links to other fields (.indd, .png, .bmp, etc. nothing rare) must be updated because they all show the yellow triangle + black exclamation point symbol next to them. Someone else knows that, what can we do? We have absolutely everything tried and updated all the software from MAC OS to CS6 itself, but nothing seems to help for the long term.

  For any information required?

  Mr. Miller

  Thanks for your quick response.
  In fact, we noticed that there also seems to be something wrong with the timestamps:
  If we open the news via the MAC finder to a file (.psd for example) which is linked to one of our indesign files, it has a certain date of creation.
  If we then switch to the Indesign file that we just opened in which we had to update all the links and open information to exactly the same file looked at us in the finder, another creation date is indicated. So there also seems to be a mistake here (hope it is clear what I mean).

  Our network we are excluding the error cannot be "re-enacted". We have created several test files in Indesign (simple white page with a link to a .psd file which is also used in one of the allegedly defective files) and opened on different MACs with different versions of the OS over the past few days/weeks, but unfortunately files open without notifications or errors.

  Just as a background: a few months ago the problem seems to occur between MACs with different OS, 10, 6-10, 8 first. A file that was created on a MAC 10.6 could not be opened without updating all the links on a 10.8 Mac is why we've updated everything to 10.8. The error will not occur for about 2-3 weeks but then reoccured again. ?

  Have you heard something similar?

• Problem with links in Dreamweaver CS3 site root

  I have problems with the links from the root of the site when I'm working on my localhost with Dreamweaver CS3.
  
  I'm building a site with PHP, MySQL using the WAMP server. I have a page (www.site.com/index.php) I want to copy in the subdirectories (e.g. www.site.com/about/index.php) then I want to do the copy as painless as possible by using the links from the site root (e.g. /about/index.php). It works on the internet but NOT on localhost.
  
  Why is this? What can we do? Is there a fix if it is a bug? This seems like a simple thing, but it's such a problem.

  > Why is it?

  Because when your (local) server see is you run to the
  ROOT, he goes to ITS root, and rather than the Web site root (for example, htdocs or Inetpub).
  You can work around this by using virtual hosts (google it).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "KBwebpro" wrote in message
  News:fr6g48$GS4$1@forums. Macromedia.com...
  > I have a problem with links from the root of the site when I'm working on my
  > localhost with Dreamweaver CS3.
  >
  > I am building a site with PHP, MySQL by using the WAMP server. I have a page
  > (
  (> www.site.com/index.php) I want to copy in the subdirectories (for example
  (> www.site.com/about/index.php) if I want to make as painless print
  > as
  > possible using links from the site root (e.g. /about/index.php). He
  > works
  > on the internet but NOT on localhost.
  >
  > Why is it? What can we do? Is there a fix if it is a bug? This
  > seems
  > like a simple thing but it's such a problem.
  >

• ITunes has stolen my music from my computer. Because they do not want to deal with the public, what should I do to get back them.

  Every so often, iTunes sends a notice to update the iTunes on my computer. Last year after that they did, all sounds have disappeared from my list of reading hundreds of old songs. Now, when I click on any song or melody, nothing happens.

  Given that Apple does not want to deal with the public, I ask, what do I do now, please?

  See the empty/corrupted after upgrade/crash iTunes library. Ideally, the measures taken immediately after that the problem appeared would restore your library. In some cases your media may be still on the computer, but not when iTunes is looking to it. The songs that do not play show with an exclamation point in the view of songs? ITunes plays all audio signal at all?

  TT2

• problem on copy with hp printer m127

  Hello

  Sorry! my English is not good

  I have a printer hp m127 and I have problem on copy with this printer

  When I copy an A4 of sandpaper or Charger do not print about 1 inch of the bottom of the page, but when I scan this page, it is OK and when I print the document scanned, it's too good

  I don't know why this problem exists

  Thank you very much

  Hi @hamidjoon and welcome to the Forums of HP!

  I see that you have problems with copy.  I would like to help!

  Before we start, I need a little info:

  I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Please let me know what you find.  Thanks for posting on the HP Forums!

• My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9

  My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9.  If anyone has experienced this problem and do you know a solution?

  Hello
   
  What is the full error message?
  The average while you can also contact QuickBooks for additional help.
  Here is the link: http://community.intuit.com/quickbooks

• MAC filter list giving problems on EA6500 with bridge

  Hello

  installed a router EA6500 and WUMC710 bridge.

  I tried using the MAC filter option and included all my wireless devices, including the WUMC710 bridges.  The MAC filter works great for wireless computers and smart phones.

  It also works for bridges, the bridge is accessible from the network and can be opened for installation.  However, all devices connected to the bridge are considered to be wireless devices.  No, problem, can live with that.  For example, included the MAC addresses of these devices (Media Player, desktop,...).

  Even when I've included these devices, attached to bridges, they cannot access the network or accessed via the network.  For some reason, the router seems to make a difference between wireless devices, directly attached to the router and devices are connected to the WUMC710 bridge.

  When I do not use the MAC filter, the devices work properly.

  With my old router / bridge configuration, I never knew that the devices connected to the bridge where the as wireless devices.

  Someone at - it experience with this problem?  Is this a problem with the gateway or router?

  MAC addresses that you enter for the devices connected on the WUMC710 should be the LAN mac addresses. You must also include the mac address of the WUMC710 instead of just the mac address of LAN wireless. It is the way in which the bridge is designed to work if you have the mac address filtering is enabled in the router. Got this info from this link: http://homecommunity.cisco.com/t5/Access-Points/WUMC710-MAC-Address-issues-when-using-MAC-Filtering/....

• I have a problem with a Gamehouse game. Talked to them and they say that it is a problem of compatiablity with Vista.

  I have a problem with a Gamehouse game

  Talked to them and they say that it is a problem of compatiablity with Vista. It's Super Jigsaw Puzzle and I the hours worked in several puzzles and now when I try to go inside he closes Super Puzzle. This is frustinating because I've uninstalled and reinstalled the program 3 times, it does not help. Is that what I can do to fix this problem in Vista? I have all the updates except IE 8.  We like IE7, but all the other updates sent we have.

  If it is a program downloaded and installed, read this:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Z10 Outlook synchronization with link

  It's my 5th Blackberry, I thought I knew what I was doing here, but nope. I have link BB 1.1.1.32 and 10.1.1.2019 OS and do not have Outlook to synchronize with link. My first 4 Blackberries was just a matter of plugging and pressing sync. With the Z10, I keep trying and can't seem to synchronize. It is very important to me that I need to sync my contacts, calendar and tasks every day to stay on the right path. I got on the phone since March, and I'm close to throwing in the towell and using upgrade for my wife to get a different brand phone that will be synchronized. I like the phone otherwise, but it's a deal breaker. Any suggestions to get it to work?

  I found this article, but do not know if this matches your problem.  Are there more in detail with the error message you get when you try to synchronize?

  http://www.BlackBerry.com/BTSC/KB34453

• Problem of indexing with Google Drive sync folder

  Indexing is working in all areas on my Windows 7 computer, except for my folder of Google Sync Drive.  I have already ruled out a problem with google reader.  No there.  Seems to be an indexing problem associated with this folder.  Any suggestions to fix this problem of indexing?

  Hello

  Welcome to the Microsoft Community Forums. I understand that you are facing problem of indexing with Google Sync Drive folder.

  You did changes to the computer before the show?

  I suggest the link and follow the steps in troubleshooting.

  Improve Windows searches using the index: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Refer to how to solve problems with search and indexing?

  If the problem persists after you perform the steps in troubleshooting from the link above and if you have problem in Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• BlackBerry Z30 several problems after resoring Blackberry link Z30.

  Hello

  I worked on a problem of battery with the help of Blackberry and they had me back up my Z30 via Blackberry link to try an earlier version of the operating system. When I restored my phone (full restore), Miss me my apps Android installed via the snap and my email is no longer works.

  The email says my accounts are not valid and "some accounts have not responded." I returned to passwords, but that did not help. Are there known issues with email recovery on the last link of Blackberry under OSX?

  I thought that my Android Waze and Outlook would have questions about recovery and I remember coming across an article on the restoration of their but can't find it now. Any help or is there a collection of articles on the problems of recovery that I could look at?

  Thank you

  John C.

  Hello

  If you already work with formal support, why did they not answer these questions for you? In any case, la.2160 is quite old now... 3247 is up-to-date, and I recommend that you move to the top, via Knowyou:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-BB10-OS-using-Sach...

  If things are still not good, so I recommend the following very clean process:

  1. WIPE on the device
  2. Operating system support via the automatic charger (toujours.3247)
     • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  3. WIPE on the device
  4. Only restore settings, nothing else
  5. Re-enter your password email and re - get your add on apps

  Otherwise, remove step 4 (do not restore anything) and rather reconfigure everything from scratch.

  Good luck!

  PS - Oops... I just noticed you said OSX, which means that you are on a MAC, which means that you cannot use Knowyou or autoloader... only work on PC, but provide methods to update your device OS very clean and easy.

• vRealize 7 - NSX Automation deployments fail due to problems of certificate with vRealize Orchestrator

  Hello community,

  After you have installed the latest version of vRA, vRO, and NSX I run questions when you apply components that use components of the NSX. First of all: details of the version:

  -vRA: 7.0.0 (build 3292778)

  -vRO: 7.0.0.16989 (build 331003)

  -NSX: 6.2.1 (build 3300239)

  vRO plugin versions are delivered with the vRO version listed above with the exception of the plugin NSX, which has been updated to the latest version (1.0.3 published on 17.12.15).

  In the configured tenant vRO is configured as endpoint. I can check the data collection is running and working. I can see the plugin NSX for vRO runs the workflow 'create endpoint NSX' from time to time using the configured user of vRA VRO.

  In the configured tenant vRO is thus configured as server default for ASD vRO. Connection test is successful. When you save the config I'm prompted to approve the vRO certificate, which I confirm. Note that the thumbprint specified matches the footprint of the vRO certificate that I get during the visit of the vRO system on https://vro:8281. I am able to navigate the vRO vRA designer workflows, therefore: connection seems established.

  Within vRO the vRA COFFEE and plug-ins IAAS have been saved successfully. I am able to browse the inventory of plugin for both plugins.

  To solve the problem, I created a new unified plan within the design section of vRA with the following configuration:

  -Transport box: my area of transport configured NSX (checked: manual creation on this area using NSX works very well)

  -Routed res pol. Bridge: my reference for the dash cluster to use Pol

  -The only component dragged to canvas is a 'network and safety'-> 'On-Demand NAT Network' that uses a profile preset 1-to-many network as is "Parent network profile" without manual modification.

  -Note that, although there is a plan very simple example to illustrate the problem, it happens with any model that I have set up if any component is confgured requiring the NSX plugin for vRO.

  "Whenever I ask this plan, the request fails with the error message:" ","application [fa1e0689-0d06-4308-a914-e498c0d1fd99]: 404 not found "

  Looking in vCenter, NSX and vRO I can check that nothing is really trigged when you ask for the action plan.

  Consider the vRA /storage/log/vmware/vcac/catalina.log becomes very visible:

  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.isEndpointAlive:88 -
  vRealize Orchestrator endpoint with url [https://s00-vro.my.domain:8281/vco] is not alive. 
  Exception message:> [Host name 's00-vro.my.domain' does not match the certificate subject provided by the peer (CN=s00-vro.my.domain, OU=VMware, O=My Company, C=DE)]
  
  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.getFirstAliveEndpointByPriority:200
  - vRealize Orchestrator endpoint [https://s00-vro.my.domain:8281/vco] with priority 1 is not alive. Skipping.
  
  org.springframework.web.servlet.mvc.method.annotation.ExceptionHandlerExceptionResolv
  er.logException:189 - Handler execution resulted in exception: Endpoint not found. There are no vRealize Orchestrator endpoints that are alive.
  
  com.vmware.vcac.platform.service.rest.resolver.ApplicationExceptionHandler.handleHttpStatusCodeException:673 - 404 Not Found
  org.springframework.web.client.HttpClientErrorException: 404 Not Found
  ...
  ...
  ...
  
  

  Please note that I double checked the certificate. This is a self-signed certificate created using the 7.0 vRO new control panel, the one I get when you go to https://vro:8281. It is valid and the object (issed to CN) matches perfectly the hostname entered the ASD and endpoint configuration in the vRA. It is separable and time on all components of the server is in sync with the use NTP.

  Now, I even re-generated certificate and re-registered and rebooted all the components, but while I can see that the certificate has been updated all components I always get the same question.

  Never had this problem with the previous version of the NSX / vRA / vRO. I checked the documentation if nothing has changed here, but did not find what I'm doing wrong. Anythimg I'm missing here? Any bug?

  OK, this seems to be the issue. So put atleast to previous day since version ofvRO (cannot check if it's true for charges vRO 7 installs as well but it is probably) vRO 'control center' will generate certificates based SHA1 vRA love not for actions that use the endpoint in the vRA vRO. ASD seems to work without these problems.

  Sidenote: VRO upgraded installs will also come with SHA1 based CERT if they use a self-signed cert created by vRO. However: you would think that it is sufficient to recreate the cert using the control center. But it turns out it isn't, because it will generate a (new) based SHA1 cert.

  What I did to solve the problem:

  1. create a vRO SSH2 based certificate without the cert extensions, similar to the one that ships with built-in vRA vRO. I tend to use xCA for these jobs, but openSSL will do as well. The exact format required for the certificate of vRO is not documented, but I can make sure you need it like this: PEM certificate in key private and public including format PKCS #1, formatted as follows:

  -----BEGIN RSA PRIVATE KEY-----
  (Your private Key: your_vro_server.key)
  -----END RSA PRIVATE KEY-----
  -----BEGIN CERTIFICATE-----
  (Your primary certificate: your_vro_server.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your intermediate certificate: intermed.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your root certificate: root.crt)
  -----END CERTIFICATE-----
  

  I had problems when I used the key extensions so I would say you don't use and don't create a very basic cert without extensions V3, as indicated on the right of the image to my last post (ideally, you want to have a cert with the same properties as the cert is used by the device of integrated vRO vRA unless of course different CN) etc.).

  2. use the vRO control center located at https://your-externa-vro:8283 / vco-controlcenter / #/ and move to--> Orchestrator Server SSL certificate certificates. Use the action to import to import your PEM cert. It should tell you that you need to restart your device vRO. Then RESTART the device (for not just restart the service, this seems not be sufficient).

  3 al ' vRA remove the Endpoint vRO everywhere wherever it has been configured. Also, I removed the vRO to the ASD config just to make sure that nothings left.

  4 reboot the vRA power (IAAS can be left as what). I needed to do this because I have seen that the keystore at some point would keep beeing crushed by CERT vRA (?), I deleted it (AND I checked that they are deleted) reappears in the keystore after a while. After a reboot, the problem was gone, the keystore was clean.

  5. Add the configuration of endpoint and ASD vRO. Accept the certificate.

  6. the works.

  Therefore, while I have no more time to solve the problems more than I guess the problem is the SHA1 function certificate generated by the device of vRO. The internal unit is equipped with a SHA2 based cert that works and after that change the external device SHA1 cert in a basic cert SHA2 all works.