Problems of synchronization/Notification on network WiFi home

Similar Questions

• Problems connecting to a Satellite Pro 4600 for network wireless home

  Hello
  My computer has a processor Athlon 64 x 2 4200 + and 2 GB of RAM, with XP2 Pro. I have a Linksys WRT54GS broadband router and connected with Virgin Media.

  My daughter gave me an old laptop a Satellite Pro 4600 with a 747 MHz Celeron processor, 384 MB of RAM and XP2 Pro has an Intel Pro/100 VE Network adapter. I set up a Linksys Wireless - G Notebook Adapter with SRX (model No. WPC45GX), so that I could use around the House. However when I try to connect to the home network, although he "finds" a list of networks, I am unable to connect and get an error message - "Windows cannot connect to the selected network (my home network). The network can be is no longer in range. Please refresh the list of available
  networks and try again. »

  I tried to connect with laptop computer in the same room as the router, but get the same message. In the Manager of peripheral devices, network cards, the two are shown and both work properly, but in the taskbar there is a red cross shown on the two icons, they say that a network cable is unplugged, but I don't have a cable network.
  The other tells me that the wireless is not connected.

  I presume that the adapter works as it can 'see' wireless networks, I used Lynksys support to verify that all router and adapter settings are correct.
  My wife has a new laptop and is able to connect to the home network with no problems.

  Please can someone offer advice or assistance.

  GMC

  for some reason, you need to turn off your wired connection (cable) and use the client of the PCMCIA wireless network card. Maybe just the problem that your system can not separate the two network connections and gets an error it s. You should also visit the site Web of Linksys and download the latest driver and the customer for the card, so you can make sure that the software is up to date.

  Another good idea would be to visit www.microsoft.com and the support center for any 'knowledge base documents' which could probably solve the problem.
  As your machine is really old and no one is using PCMCIA cards more, you may wait a long time for an answer in this forum. Maybe you should check the site from linksys for a support section. Maybe they could help you...

  Welcome them

• Issue of 'no networks detected. Problems with the AR5BWB222 driver for WiFi adapter. Help, please!

  Hi all

  I need your help!

  then a few days ago my wifi started playing on my acer Windows 8 V5-552 and I have decided to update the driver for the card. I did this by unistalling and re-istalling the driver for the Atheros AR5BWB222 map I downloaded from this site acer very (it turns out it's the same version), now I have no WiFi connection at all (I am currently using ethernet cable but I need to be mobile around the House!). Troubleshooting does not help and said "there could be a problem with the driver for the WiFi card" and when I click fix problem there is no NOTHING (why did even give the option?). Did a system restore and that didn't work because of my antivirus and there still nothing when I turned antivirus off the coast. Then I read a lot of forum preveous questions on this driver and no solutions helped, maybe because everything is last year.

  I really want to avoide a factory reset as I have some programs here that will be very difficult to acquire again.

  If you're still here after my speech, I am greatfull and also want your knowledge and advice about this superior! Please help me!

  What antivirus program you are wrong with turning off? I know that some may be stubborn. If the AV program refuses to turn off this feature with a selective startup in MSCONFIG, then you can try to uninstall it completely in the PANEL. Then try to restore to the previous new date

  Jack E/NJ

• Problem with timeout when connecting to wifi

  Although my laptop connects to other networks wifi (unsecured), it does not connect to my wifi network at home. The error message says that the wireless card has failed due to timeout. The Atheros 5700 card reports that it works correctly. I tried several fixes suggested as the reinstallation of the drivers, etc.. Microsoft asatap adapter has disappeared from the list of cards and will not reinstall.

  Any suggestions?
  Chet

  Hi Chet,

  Welcome to the Microsoft community.

  From the description, seems that you are not able to connect Wifi for home secure Wifi network.

  1. what version of Windows you have on your computer?

  2. it worked before?

  Method 1: You can try a system restore to the date that it worked:

  System restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Method 2: Reinstall the drivers:

  a. go to Control Panel

  b. open the Device Manager

  c. uninstall the network card and restart the computer

  (d) download and install the driver from the manufacturer's website

  Post back with the result. If the problem is still not resolved, we will be happy to help you further.

• Problem with the primary dns server, get the error "There could be a problem with one or more network adapters on this computer."

  Hello

  I was all of a sudden having problems connecting to my wifi at home. When I was diagnosed, he says cannot communicate with primary dns server. I tried all methods in similar positions, but nothing works. I am also unable to connect to internet with my iphone and the itouch. It's really frustrating, because I've already tried all of your suggestions. I just ran another ' diagnose connection problems and it says the following:
  "There could be a problem with one or more network adapters on this computer." Help, please!
  Thank you!

  Thanks for your help, but I have tried this before. In the end I just unplugged my modem and plugged in again and it worked? I feel a bit silly not to try first.

• Unable to find network, wifi and bluetooth driver for windows 7 64 bit professional

  Hai,

  My (Compaq 15-s001TU) G8D87PA have some problems finding the pilot network, wifi and bluetooth. My os is windows 7 Professional 64-bit edition, someone please help me find it?

  Thanking you

  Omal Bose

  Dear lasvegaswireman thank you very much for your answer. Last day I contacted the HP support team and I got the resolution, Compaq 15-s001TU comes with pre loaded back free. If you want to upgrade to windows 8, I believe that you will find no difficulty in finding the drivers for the HP product support page. But in the case of windows 7, you will not get the driver LAN, Wifi and Bluetooth page main media because HP made this model to be worked with windows 8. They provide generic drivers for above mentioned drivers missing. First of all let me dissect the details of manufactured goods of chipset for this model which is not mentioned in anywhere (not even in the catalogue).

  Blue tooth - Ralink Chipset

  WiFi-Ralink Wifi

  LAN-Realtek Chipset

  -Realtek card reader

  Chipset: Intel

  USB3-Intel chipset

  I contacted HP support to solve the problem of missing driver. You can use the following links to get missing drivers for Windows 7 64-bit professional edition

  RALink bluetooth

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-119299-1

  RALink 802.11 b/g/n WiFi Adapter

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-111782-1

  Driver and Intel Chipset Installation utility

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1&cc=us&DLC=en&LC=en&OS=4063&product=7137570&sw_lang=

  Intel USB 3.0 Host Controller Driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134312-1&cc=us&DLC=en&LC=en&OS=4063&product=7137570&sw_lang=

  Realtek card reader driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134096-1&cc=us&DLC=en&LC=en&OS=4158&product=7137570&sw_lang=

• You cannot change the ID network of home-based business

  I'm changing my network ID of a network of home-based business, but after I restarted my computer it comes back constantly as company.

  Hello Hector,

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Your system has already been connected to a network domain?
  3. What is the edition of Windows 7, you use?

  The question arises after the restart, if your system does not have the authorization of the user to change the location of the network. To diagnose and solve the problem, I suggest you try the following steps:

  Method 1:

  You can also perform network troubleshooting that might help us diagnose the problem better.

  Access the link for more information on troubleshooting network below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  The question may also be due to the user permissions are not available to change the location of the network. You can try the following steps and change the following settings.

  1. Click Start, type gpedit.msc in the search box and press ENTER. This step opens the local Group Policy Editor.
     (Click Yes if you are prompted.)
  2. Expand Computer Configuration, expand Windows settings, Securitysettings, expand network list manager policies, and then double-click network in the right window.
  3. Go to the network location tab, then click on user can change location under the section user permissions.
  4. Click OK , and then close the Group Policy Editor.
  5. Restart the computer.

  Note: The steps above are valid for Windows 7 Professional, full and business editions.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How can I configure the order of networks wifi on my iPhone 6?

  I was browsing the Internet and looking for throughout my general settings but I'm not able to find a way to configure the order of networks wifi on my phone, as I can with my MacBook Air (via Network Preferences > advanced > tab Wi - fi). I had to do a reset to the factory on my router settings and now my iPhone automatically connects to another wifi network in the building which is distant; and, as a result, poor reception. He will also choose my device Chromecast before my own router, so I have to go and manually choose my router every time.

  Is my only option to "forget this network" for the device Chromecast and the other network wifi. Therefore, to move my router plus high in the list (and then add those two later, put further down in the hierarchy list), or y at - it a simple way to just change the order? Thanks for the help.

  Settings > Wi - Fi > select the network to which you want to connect, enter the password.

• Problems of synchronization of calendar and contacts between Outlook 2010 and iPhone 5 s

  I have problems of synchronization of calendar and contacts between Microsoft Outlook 2010 and my iPhone 5 s. I've implemented iCloud and probably, this problem started when I updated the OS 9.2.

  Any guidance would be appreciated.

  Thank you in advance.

  Howdy Kishor,

  Welcome to Apple Support communities.

  As I understand it, there is a problem syncing contacts and calendars between Outlook 2010 on your PC and iPhone 5 s. try to take a look at the article linked below which provides much information about the iCloud application Windows and tips that should help you to solve this problem of general troubleshooting.

  Get help using Outlook with iCloud for Windows - Apple Support

  See you soon.

• I have problems to connect to my network wireless computers in my house running XP Pro.

  Hello. I have problems to connect to my network wireless computers in my house running XP Pro. I set up my wireless router to use WPA - PSK encryption. When I type in the passphrase on computers running XP in my house, I get an error message indicating that the password must be 5 to 13 ASCII characters or 10 to 26 characters in hexadecimal. It doesn't even seem like it checks the password. The error immediately.

  I tried to connect to the network using my work running Windows 7 laptop and it works fine. Any help would be appreciated. Thank you.

  original title: cannot connect wireless

  Go, I tried and it worked was that you have to be sure what parameters you have set when you set the security of your are wireless (for example the Type of security, Encryption Type etc.) and they have to be compatible with the version of your laptop.
  Older versions usually have 64bitWEP or WEP 128 bit and newer versions have WPA, WPA2-Personal (PSK).

  The 64-bit and 128-bit require 5 or 13 characters. These characters can be obtained when you configure the wireless (it will ask you to put the characters and the characters will be automatically converted to hexadecimal characters, which it must be remembered that they are the password wireless).

  WPA or WPA2 - Personal (PSK) are easier to implement and the passwords are normal characters that you want it to be.

  Then go to your security wireless set up the page and re - configure the password or the type of network and it should help

• Problem "there could be a problem with one or more network adapter on the computer?

  Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

  Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

  Hello:

  If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• The arrow of extension in the notification area (Vista Edition home premium) is missing

  original title: the notification area (Edition Vista Home premium)

  The arrow of extension in the notification area is missing?, all other icons are there, have tried to check the "Hide inactive icons" in the properties and also tried unchecked, option niether worked after a reboot?, seems very odd it disappeared as she did, as I havnt changed from the settings?

  Check the individual behavior of the icons in the taskbar properties? In the Notification area tab of the properties of the taskbar click the button 'Customize' to check. You can also try clicking on the "Default settings" button.

  How to reset the Cache Notification Area icons in Windows 7 and Vista

• Irregular problem connecting to the wired network

  My Windows 7 PC has an irregular problem, connect to the local network of cable through a provided network of the netgear modem/router.

  The connection timeout is the question and sometimes takes a while four two minutes or more.

  A reboot of the pc never seems to resolve but (quite often, in fact usually) will be a restart of the modem.

  The modem is always on (as the announced network connection is supposed to be).

  The network provider has replaced the modem, and the problem persists. This leads me to believe that there is a start up or similar problem with the pc.

  I ran the troubleshooter in windows... no chance/results. Is there a "fixit" tool I could try or something similar?

  Happy to clarify, to provide more information and appreciate any input.

  concerning

  Lethal42

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to refer to the link below and check if this is useful:

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Hope this information helps.

  Sincerely,

  Ankit Rajput

• Problem on Windows 7 computer network connectivity

  The desktop of Windows 7 ether net connected, I had selective network problems. I was unable to access the Web sites, but had no problem to update software and connections to the game servers. I ran antivirus and optimizer software to solve the problem, but I think they may have removed some crucial programs for networking.  Now, I am unable to access the Internet related services all via ether net.

  I tried to reinstall the driver for network card to the motherboard. Among network cards, the teredo tunneling adapter displays an error titled code 10. I tried the REGEDIT fix and reinstall the driver.  None of these solutions so far have worked.

  I'm not sure whether the mistake of teredo is the cause, but it seems like a common problem. Anyone know how I might be able to solve this problem?

  Original title: network connectivity problem

  Hello

  Thanks for the reply.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the computer?

  2. that you get an error message when you connect to the Internet? If Yes, what is the full error message?

  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  See the article for more information.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.