Problems of Tunneling comments

Similar Questions

• Problem with his comments before signing the PDF.

  Problem with his comments before signing the PDF.

  My problem is with sticky notes that I need to use my comments frequently.

  When I place my signature and save document commented, disappear all pop-up windows and icons of sticky notes go "flat" of the document.

  It's the same with all the annotation tools and pop ups disappear if I use them with.

  Is there a way to keep comments and pop-ups 'living' signing and recording after his comments?

  Fig 1: commented the document before you sign and save.

  

  Photo 2: after you save the signed document. Pop - ups disappeared and sticky notes are here to stay.

  

  Hey Tomi,

  It was a typo on the part of Ajlan. It was supposed to read "Lock after signing the Document. Please see the screenshot below. However, this check box only appears in the dialog box sign the Document If you sign the last signature on the PDF field. If you don't, it's because there are other unsigned signature fields.

  Steve

  

• Problem with tunnel IPSEC with NAT

  Hello

  I had an ipsec tunnel between a former Cisco router at a remote site. I'm the config 887 to an ASA migration. The remote site cannot establish the tunnel. This is the only site having problems. There are one number of other sites remote connection back without problem.

  The Setup is

  192.168.1.x (main site inside) - ASA - 86.x.x.x (outside) - Internet - 159.x.x.x (side remote outdoors) - Firewall - 10.10.10.x

  The remote site will not accept the 192.168.1.x range so I'm NATing 192.168.50.x which is what they want to see

  The config I have is

  network of the NAT_TO_Remote1 object
  192.168.50.0 subnet 255.255.255.0
  network of the Remote1 object
  subnet 10.10.10.0 255.255.252.0

  NAT NAT_TO_Remote1 (Interior, exterior) destination 192.168.1.0 source static static Remote1 Remote1

  IKEv1 crypto policy 30
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400

  Crypto ipsec transform-set esp-3des esp-sha-hmac ikev1 3DES-SHA1

  card crypto Outside_map 10 corresponds to the address Qualcom_VPN
  card crypto Outside_map 10 set peer 159.x.x.x
  card crypto Outside_map 10 set transform-set 3DES-SHA1 ikev1
  card crypto Outside_map 10 set pfs Group1
  Outside_map interface card crypto outside

  RemoteSite_VPN list extended access allowed host ip 192.168.50.20 10.10.10.0 255.255.252.0
  RemoteSite_VPN list extended access allowed host ip 192.168.50.30 10.10.10.0 255.255.252.0
  RemoteSite_VPN list extended access allowed host ip 192.168.50.40 10.10.10.0 255.255.252.0

  tunnel-group 159.x.x.x type ipsec-l2l
  tunnel-group 159.x.x.x General-attributes
  Group Policy - by default-RemoteSites
  159.x.x.x group of tunnel ipsec-attributes
  IKEv1 pre-shared-key *.

  I was wondering if I'm missing something obvious here.

  Hello

  You must check the IPSEC transform set and see if they have enabled PFS group or not?

  card crypto Outside_map 10 set pfs Group1

  Try using group2, or turn it off.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Problem with Tunnel VPN L2L between 2 ASA´s

  Hi guys,.

  I have some problems with my VPN Site to site tunnel between 2 ASA (5520/5505).

  I watched a lot of videos on youtube, but I can't find out why the tunnel does not...

  Both devices can ping eachothers WAN IP address (outside interfaces), but I don't see any traffic between the 2 sites. It seems that the tunnel is not open to everyone. When i PING from the local to the Remote LAN (which should be an interesting traffic for the tunnel...), the its IKEv1 remains empty...

  Am I missing something? I can't understand it more why same phase 1 is not engaged.

  You NAT won't. In your config file traffic is NATted initially and then does not match any more crypto ACL. You must move the rule dynamic NAT/PAT until the end of the table on two ASAs NAT:

   no nat (INSIDE,OUTSIDE) source dynamic any interface nat (INSIDE,OUTSIDE) after-auto source dynamic any interface

• ASA5540 Problem of Tunnel

  I'll put up ASA5540 for remote access VPN in my LAN. The tunnel between customers and ASA is successfully established and the client is assigned an ip address. The problem is that I can't access any resource in my local network despite the privilege of full access I have, when I debug everything trying to access my LAN, no error is recorded, its interesting traffic as can't my ASA. What could be the problem? Please help.

  NAT-traversal is disabled by default in version 7.0. I would upgrade to 7.2 or turn on nat-traversal with the following command.

  ISAKMP nat-traversal

• Problems intermittent tunnel

  On one of our IOS - IOS tunnels, the isakmp seems corrupt itself from time to time, causing the tunnel to close.

  See the "BOLD" newspaper (debug crypto isakmp) text:

  017975: 25 Oct 10:03:32.702 THIS: % CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is running

  017976: 25 Oct 10:03:34.698 THIS: % LINK-3-UPDOWN: Interface Tunnel0, changed State to

  017977: 25 Oct 10:03:47.110 THIS: ISAKMP: (0): profile dmvpn_spokes_isakmp ignored because of the incompatibility of the VRF *.
  

  017978: 25 Oct 10:03:47.110 THIS: ISAKMP: (0): did you put good FVRF in the command 'is the id of the ip address?

  017979: 25 Oct 10:03:47.110 THIS: ISAKMP: (0): deletion of 'Initial of receive Contact' State HIS reason (I) MM_NO_STATE (peer [REMOTE_IP])

  017980: 25 Oct 10:03:47.110 THIS: ISAKMP: (0): deletion of 'Initial of receive Contact' State HIS reason (I) MM_NO_STATE (peer [REMOTE_IP])

  017981: 25 Oct 10:03:47.138 THIS: ISAKMP: (1041): IPSec policy invalidated proposal with error 32

  017982: 25 Oct 10:03:47.138 THIS: ISAKMP: (1041): politics of ITS phase 2 is not acceptable! ([LOCAL_IP] remote local [REMOTE_IP])

  017983: 25 Oct 10:03:47.138 THIS: ISAKMP: (1041): error suppression node 570435705 REAL reason "QM rejected."

  017984: 25 Oct 10:04:02.726 THIS: ISAKMP: (1041): IPSec policy invalidated proposal with error 32

  017985: 25 Oct 10:04:02.726 THIS: ISAKMP: (1041): politics of ITS phase 2 is not acceptable! ([LOCAL_IP] remote local [REMOTE_IP])

  Now, it is really strange, since _no_ configuration has been changed on each side.

  Even more strange - closing/compensation/reiniting immediately gives just the same error. However, if we keep the tunnel closed for awhile ifaces (about 5 minutes for example), tunnel back upward.

  Could it be because of something cached outwardly somewhere along the road?

  Is there maybe a delay on one of the routers that can be reset that I'm not aware of?

  IOS bug (v12.4 (1r))?

  Jorn,

  For me, it looks like a problem with the isakmp profile.

  I'm not sure that you need to set the ivrf on profile, as long as you ivrf on the tunnel interface. I would need to do a laboratory test - seems pretty easy to reproduce.

  I'll be there for the next 10 days, what I would suggest is to open a service request and specify this thread as a reference.

  Marcin

• Problem with the comment tool, I do not see my comments

  I use one PC with Windows 8.1 and Adobe Acrobat Reader DC. With the help of the "Add ". a comment"tool, I see that content when I select. . The remaining it is not displayed.  I need to take notes in my book to give a few lessons and I can't see my comments in the PDF file. What can be my problem?

  Thank you for asking.

  Can you open a few other PDF, create a note annotation, set its properties to your taste, then right-click and select Properties, set opacity to 100% and click on the checkbox "Use default properties" at the bottom.

  Close the player. When you open the player, these properties will stick?

  If not and you are comfortable using the command line (CMD prompt) to run a command, you can run the following command:

  reg delete "HKCU\Software\Adobe\Acrobat Reader\DC\Annots\cAnnots"

  reg delete "HKCU\Software\Adobe\Acrobat Reader\11.0\Annots\cAnnots"

  This should dispel any annotation stored preferences and also the preference of 0-opacity which appears to have been set.

• Problem with your comments when you run Skype and Team Viewer 11

  G ' Day of Australia.

  Today, I downloaded the latest version of Skype. I have Windows 7 Professional.

  I contacted my friend on Skype and videoconferencing worked perfectly.

  I then tried to take control of his computer via Team Viewer 11.

  Hi, the computer is a Toshiba Satellite Pro running Windows 7.

  Unfortunately, when I talked to him he got terrible echo feedback. He tried to plug the headphones in his computer, but also got terrible feedback when I talked to him. He also cut its speaker and still got feedback.

  I've heard for me no problem.

  I hope that there is some good soul out there who can help.

  Thank you.

  Paul.

  Wow Techfreak.

  Thanks a lot for your response altogether.

  Works perfectly now.

  Best wishes and keep up the excellent work.

• Enable ASA 9.1 problems with tunnel-group-list

  Hello!

  I try to get a working configuration where the Cisco VPN / DTLS phones VPN connect, while allowing access remotely via client AnyConnect of PCs.  I have two groups of tunnel and configured for this purpose of group policy and use Group-URL.

  Phones are connect very well, but I don't get the drop down menu to choose between the two groups of tunnel when connecting to a remote computer.

  An excerpt from the config.

  Moreover, I had the menu work previously when I used group instead of group-URL aliases.  However, the phones seem to require the URL group.  Now that I have those configured, the menu does not work.  If I get the full URL in the AnyConnect window, both URLs work, and I can connect.

  Thank you in advance for any suggestions you may have!

  Deb

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

  AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2

  AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3

  AnyConnect enable

  tunnel-group-list activate

  ABC Group-Policy internal

  ABC Group Policy attributes

  value of server WINS 10.10.16.17 10.10.16.12

  value of 10.10.16.17 DNS server 10.10.16.12

  VPN - connections 3

  SSL VPN-tunnel-Protocol l2tp ipsec client ssl clientless

  Split-tunnel-policy tunnelall

  field default value abc.com

  the address value AnyConnectPool pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  time to generate a new key ssl AnyConnect 1440

  AnyConnect ssl generate a new method ssl key

  AnyConnect client of dpd-interval 5

  dpd-interval gateway AnyConnect 30

  AnyConnect ask none

  internal strategy of group ABC - STG

  ABC - STG group policy attributes

  value of server DNS 8.8.8.8

  VPN - connections 3

  SSL VPN-tunnel-Protocol l2tp ipsec client ssl clientless

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value Split-Tunnel-encrypt-ACL

  field default value abc.com

  the address value AnyConnectPool pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  time to generate a new key ssl AnyConnect 1440

  AnyConnect ssl generate a new method ssl key

  AnyConnect client of dpd-interval 5

  dpd-interval gateway AnyConnect 30

  AnyConnect ask none

  type tunnel-group Split-Tunnel-Group remote access

  attributes global-tunnel-group Split-Tunnel-Group

  address pool AnyConnectPool

  Group Policy - by default-ABC-STG

  tunnel-group Split-Tunnel-Group webvpn-attributes

  allow group-url https://asa.abc.com/ABC-STG

  tunnel-group ABC - Tunnel - type remote access Group

  attributes global-tunnel-group ABC - Tunnel - Group

  address pool AnyConnectPool

  Group-ACTIVE DIRECTORY authentication server

  Group Policy - by default-ABC

  password-management

  ABC - Tunnel tunnel-group - webvpn-attributes Group

  allow group-url https://asa.abc.com/ABC

  Hello

  You can have group-alias and group-url at the same time in the configuration so that the phones can connnect with Group-url and users can click on the drop down menu to select the right connection profile.

  tunnel-group webvpn-attributes
  Group-alias enable
  Group-url help

  Ref:- http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Logging in problems of cat comments

  Hi all

  I'm having a problem with the implementation of a test of instant messaging client. I can connect to the CAA air as the developer application, and I can connect with my sample of Flex. However, when I change my AdobeHSAuthenticator.authenticator.userName to guest and the password = null, I get a "Error #1009: cannot access a property or method of a null object reference." FlashDevelop points to the sendMessage method and the clear method of the SimpleChatModel object.

  Any ideas? Thanks in advance

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:TitleWindow ' http://www.Adobe.com/2006/MXML "x title = '0' ="Cat Simple"width ="400"height ="400" "
  xmlns:RTC = "AfcsNameSpace" creationComplete = "init (); ">
  < mx:Script >
  <! [CDATA]
  
  import com.adobe.rtc.sharedModel.descriptors.ChatMessageDescriptor;
  import com.adobe.rtc.session.ConnectSessionContainer;
  import com.adobe.rtc.events.ChatEvent;
  import com.adobe.rtc.sharedModel.SimpleChatModel;
  import com.adobe.rtc.events.AuthenticationEvent;
  import com.adobe.rtc.authentication.AdobeHSAuthenticator;
  import com.adobe.rtc.events.SessionEvent;
  import flash.ui.Keyboard;
  Import mx.controls.Alert;
  
  import flash.events. *;
  
  This simple example shows just how this shared model can be done easily binable for MXML.
  See SimpleChatModel for more details
  
  [Bindable]
  public var _auth:AdobeHSAuthenticator = new AdobeHSAuthenticator();
  
  [Bindable]
  public var simpleChatModel:SimpleChatModel;

  [Bindable]
  private var _cmd:ChatMessageDescriptor;
  
  private function init (): void
  {
  
  _auth. UserName = "customer";
  _auth.password = null;
  
  cSession.login ();
  
  _auth.addEventListener (AuthenticationEvent.AUTHENTICATION_FAILURE, onAuthenticationResponse);
  _auth.addEventListener (AuthenticationEvent.AUTHENTICATION_SUCCESS, onAuthenticationResponse);
  
  cSession.addEventListener (SessionEvent.SYNCHRONIZATION_CHANGE, onSessionEventResponse);
  cSession.addEventListener (SessionEvent.ERROR, onSessionEventResponse);

  
  }
  
  public void onAuthenticationResponse(event:AuthenticationEvent):void {}
  If (event.type == AuthenticationEvent.AUTHENTICATION_SUCCESS) {}
  trace ("authentication successful");
  buildModel();
  }
  Else if (event.type == AuthenticationEvent.AUTHENTICATION_FAILURE) {}
  Alert.Show ("authentication error:" + event.toString ());
  }
  }

  
  
  public void onSessionEventResponse(event:Event):void {}
  If (event.type == SessionEvent.SYNCHRONIZATION_CHANGE) {}
  If {(cSession.isSynchronized)
  Now we are connected and the pods have themselves synchronized, so go to the main screen
  Switch to pods collaboration i.e. ConnectSessionContainer
  vsMain.selectedIndex = 1;
  }
  else {}
  We are now disconnected
  cSession.roomURL = null;
  vsMain.selectedIndex = 0;
  }
  }
  Else if (event.type == SessionEvent.ERROR) {}
  var sError:SessionEvent = event as SessionEvent;
  Alert.Show (sError.error.name + ":" + sError.error.message);
  }
  }

  
  
  private function buildModel (): void
  {
  
  Create the model: just call the constructor will not create the node in the collection or the messages.
  Call to subscribe and five it an ID shared during the creation of the model.
  The shared ID becomes the name of the node in the collection.
  simpleChatModel = new SimpleChatModel (true);
  simpleChatModel.sharedID = "simpleChatModel";
  simpleChatModel.subscribe ();

  simpleChatModel.addEventListener (ChatEvent.HISTORY_CHANGE, onChatMsg);
  
  }
  
  private void submitChat(str:String):void
  {
  _cmd = new ChatMessageDescriptor();
  _cmd. DisplayName = cSession.userManager.getUserDescriptor (cSession.userManager.myUserID) p:System.NET.mail.MailAddress.DisplayName.
  trace (_cmd. DisplayName);
  trace (STR);
  
  _cmd. MSG = str;
  
  simpleChatModel.sendMessage (_cmd);
  
  chat_msg_input. Text = "";
  }
  
  private void clearChat (): void
  {
  chat_msg_area. Text = "";
  simpleChatModel.clear ();
  }
  
  private void onChatMsg(evt:ChatEvent):void
  {
  If (evt.message! = null & & evt.message.msg! = null & & evt.message.displayName! = null)
  {
  chat_msg_area. Text += evt.message.displayName + ":"+ evt.message.msg + "\r"; ".
  
  } else {}
  chat_msg_area. Text = "";
  }
  }
  
  []] >
  < / mx:Script >
  
  " < = roomURL rtc:ConnectSessionContainer ' https://ConnectNow.Acrobat.com/trainone/myfirstroom "authenticator ="{_auth}" "
  ID = "cSession.
  Width = '100% '.
  Height = "100%".
  autoLogin = "false" >
  
  < mx:VBox width = '100 percent"height ="100% ">
  < mx:TextArea width = "100%" height = "100%" id = "chat_msg_area" / >
  
  < mx:ControlBar >
  < mx:TextInput width = "100%" id = "chat_msg_input" / >
  
  < mx:Button label = click "Submit the cat" = "{submitChat (chat_msg_input.text)}" / >
  < mx:Button label = "Clear Chat" click = "clearChat ()" / > "
  < / mx:ControlBar >
  < / mx:VBox >
  
  < / rtc:ConnectSessionContainer >
  
  < / mx:TitleWindow >

  Hello

  I modified your code and it works now. Your buildModel() method has not been called and if the SimpleChatModel was always null. It was because our service was too fast :), and we were broadcasting the event AuthenticationSuccess before you can get it. It should work now.

• Comments of networking problem in Linux

  Hello

  This is my first post and need help. I'm new to ESX.

  We have an ESX 3.5 server and invited VM which has RHEL 5. Recently, we have installed the guest operating system.

  We are facing a problem with the comment system. He is not able to connect to the network. I have assigned the Ip address static and is also in the same subnet of the mail on the server Lan esx.

  Please suggest if there is any work around / limitation of RHEL5 on an ESX Server.

  vinukm wrote:

  A virtual switch - did you mantion on the switch in the ESX Server?

  Yes, I'm talking about the vSwitches in ESX.

  Is there something to do in the guest OS?

  As I wrote, you need to install the VMware tools.

  AWo

  VCP / VMware vEXPERT 2009

• After updating Firefox, trying to comment on results in a window that closes before loading and refreshes the YouTube page.

  After updated my Firefox to v.32.0.3, trying to comment or upvote a comment on YouTube results in a pop-up window brief which closed until it has loaded, then on the page YouTube refreshes. I tried to run Firefox with disabled modules, but the problem remains. Commenting on using a different browser (Chrome) works perfectly. Has anyone else encountered this problem? A few tips on how to solve it?

  Thank you!

  I was see this problem for many weeks now on 3 different computers - running Windows 8.1, 7 and Vista, respectively. I'm happy to report that I found the solution. In the Options-> privacy dialogue, you make an Exception for the 3rd party Cookies from Google.com. It's sad that OP should go through all this irrelevant advice.

• I tried to send a Feedback, but there is no link for SUBMITTING your COMMENTS!

  I tried to complain about this: "somehow eBay snuck into the search box at the top right of my screen of Firefox and I want out of here!" I found how on my own, but which does not the fundamental problem that your COMMENTS unrelated to work (or gives no indication that it works).

  See this:
  
  https://support.Mozilla.com/en-us/KB/search%20bar#w_removing-a-search-engine

• Look at how Motorola to solve customers problems

  Good evening
  Initially apologized for misspellings, used Google translate
  I would like to tell the tragedies with the Motorola customer service and dealing with the problems of clients
  I bought a Nexus one phone is the first day and found a problem in the vice of the audio industry
  Known like that by nexus devices more users 6

  https://forums.Lenovo.com/T5/nexus-6/crackling-speakers-and-random-shutdown/m-p/3200662

  https://productforums.Google.com/Forum/#! subject/nexus/84nSaI1Btxc; context-location = forum/nexus

  And began the tragedies
  I talked with a service the customer of Motorola and has appealed to replace my phone
  So far, so good
  I explained to them that the phone I sent in Egypt because the Nexus devices is available in our
  Requested to send the phone
  I wonder the shipping companies found that prices send equivalent to a $100 phone
  And when send you it once more will be charged as a new phone will pay
  And the expenses to send the phone once again customs
  The equivalent of $250
  really?
  I found the comments of users have replaced the phone and found the same problem
  I got comments from a user blog that all Nexus phones suffer from this problem
  I tried with them for all solutions
  * It offers to send the phone when we agents and replaced inside Cairo refused.
  * Suggested that if I send you the phone and pay the amount to Iqmwa replace another type, I take and I'll pay the difference in price it is foolish to push the mailing and shipping and customs in a phone faulty last time reject?
  * I suggested that they send me parts of speaker with appropriate compensation and I'm going to fix my rejection expenses?
  * I suggested that door shipment of Motorola and I I will have customs refused?

  Motorola wants to pay full price, shipping and customs again for the replacement phone
  Is it my fault? If he's going to tolerate it, but when we are talking about the default home appliances manufacturers is that my fault, that I take these costs? The phon was guaranteed within the United States in order, but this lack of manufacturers told them so if it was my fault it will tolerate, but the response has been one of send us your phone
  No matter how much the company lost or how I'll pay to ignore the cam and lack of flexibility or m through dialogue or communication with the solution is of this prestigious company like Motorola?

  However, there is another new companies have bought the phone inside it is a two-year warranty and guaranteed international and charge the phone for free to repaired

  And how society ignores a problem like this
  I found, even if we have not managed to resolve they have closed the case and wrote solved
  Is this Motorola?

  
  

• How can I make apple aware of a serious eye problem in iOS?

  It would be pointless to report this problem in the comments section.   There is no way to their walk easily through it.

  I'm on graphic problems with an iOS, some even, since iOS 7

  They are not aware of them?  They are difficult to describe without sharing the screenshots, I guess I can do here, unless I want to be able to report them somehow.   I have a transition from one generation of the operating system to another and they do not disappear.

  It seems especially revolve around dictation, but entire portions of the text field disappear at the end

  

  

  As I said, I had deal with this through several generations of software and phones.   How is this something that's obvious is not addressed?

  Feedback: Apple