Problems intermittent tunnel

Similar Questions

• His problem Intermittent Sound-'Windows Audio Endpooint Builder fell down'

  I am running Vista Home Premium on an HP Pavilion DV2000. My sound is messed up. It sounds like you take a speaker wire that is loose on a speaker and move (its out intermittently). Help, please. I tried to install the new drivers (not uninstall and reinstall but went on HP, downloaded site and crushed the) and I tried the troubleshooting Microsoft online tools.

  I get an error message is the following: "Windows Audio Endpoint Builder crash", as well as the following:

  Signature of the problem:

  Problem event name: BEX

  Application name: svchost.exe_AudioEndpointBuilder

  Application version: 6.0.6001.18000

  Application timestamp: 47918b 89

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18327

  Timestamp of Module error: 4cb73436

  Exception offset: 00086e39

  Exception code: c000000d

  Exception data: 00000000

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Thanks for any help that anyone can provide.

  Erik

  You can try to remove all the current drivers first and then installing those latest. I suggest that also consult you the site Web of Conexant for latest drivers, as is the real manufacturer of the sound chip.

  If this does not help, you can also try to disable all audio enhancements, see:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• Problem with tunnel IPSEC with NAT

  Hello

  I had an ipsec tunnel between a former Cisco router at a remote site. I'm the config 887 to an ASA migration. The remote site cannot establish the tunnel. This is the only site having problems. There are one number of other sites remote connection back without problem.

  The Setup is

  192.168.1.x (main site inside) - ASA - 86.x.x.x (outside) - Internet - 159.x.x.x (side remote outdoors) - Firewall - 10.10.10.x

  The remote site will not accept the 192.168.1.x range so I'm NATing 192.168.50.x which is what they want to see

  The config I have is

  network of the NAT_TO_Remote1 object
  192.168.50.0 subnet 255.255.255.0
  network of the Remote1 object
  subnet 10.10.10.0 255.255.252.0

  NAT NAT_TO_Remote1 (Interior, exterior) destination 192.168.1.0 source static static Remote1 Remote1

  IKEv1 crypto policy 30
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400

  Crypto ipsec transform-set esp-3des esp-sha-hmac ikev1 3DES-SHA1

  card crypto Outside_map 10 corresponds to the address Qualcom_VPN
  card crypto Outside_map 10 set peer 159.x.x.x
  card crypto Outside_map 10 set transform-set 3DES-SHA1 ikev1
  card crypto Outside_map 10 set pfs Group1
  Outside_map interface card crypto outside

  RemoteSite_VPN list extended access allowed host ip 192.168.50.20 10.10.10.0 255.255.252.0
  RemoteSite_VPN list extended access allowed host ip 192.168.50.30 10.10.10.0 255.255.252.0
  RemoteSite_VPN list extended access allowed host ip 192.168.50.40 10.10.10.0 255.255.252.0

  tunnel-group 159.x.x.x type ipsec-l2l
  tunnel-group 159.x.x.x General-attributes
  Group Policy - by default-RemoteSites
  159.x.x.x group of tunnel ipsec-attributes
  IKEv1 pre-shared-key *.

  I was wondering if I'm missing something obvious here.

  Hello

  You must check the IPSEC transform set and see if they have enabled PFS group or not?

  card crypto Outside_map 10 set pfs Group1

  Try using group2, or turn it off.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Problem with Tunnel VPN L2L between 2 ASA´s

  Hi guys,.

  I have some problems with my VPN Site to site tunnel between 2 ASA (5520/5505).

  I watched a lot of videos on youtube, but I can't find out why the tunnel does not...

  Both devices can ping eachothers WAN IP address (outside interfaces), but I don't see any traffic between the 2 sites. It seems that the tunnel is not open to everyone. When i PING from the local to the Remote LAN (which should be an interesting traffic for the tunnel...), the its IKEv1 remains empty...

  Am I missing something? I can't understand it more why same phase 1 is not engaged.

  You NAT won't. In your config file traffic is NATted initially and then does not match any more crypto ACL. You must move the rule dynamic NAT/PAT until the end of the table on two ASAs NAT:

   no nat (INSIDE,OUTSIDE) source dynamic any interface nat (INSIDE,OUTSIDE) after-auto source dynamic any interface

• Problem Intermittent of Smartphones with touchscreen Bold 9900 blackBerry

  My touchscreen Bold 9900 (in fact the entire phone) is to give intermittent problems.  Sometimes the screen scrolls icons on its own, sometimes it does not recognize the keyboard or crashes within an e-mail or on a Web site and I can't get out.  If I remove the battery for more than 20 minutes, it sometimes fixes the problem.

  My operator tells me there is a software fix, but they are virtually impossible to treat and very slow.  Can someone, please?

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  If you want to try updating your device OS, then the easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• ASA5540 Problem of Tunnel

  I'll put up ASA5540 for remote access VPN in my LAN. The tunnel between customers and ASA is successfully established and the client is assigned an ip address. The problem is that I can't access any resource in my local network despite the privilege of full access I have, when I debug everything trying to access my LAN, no error is recorded, its interesting traffic as can't my ASA. What could be the problem? Please help.

  NAT-traversal is disabled by default in version 7.0. I would upgrade to 7.2 or turn on nat-traversal with the following command.

  ISAKMP nat-traversal

• I can't post comments on YouTube with Firefox more, but can be downloaded on IE. Problem intermittent, some videos that I can post to.

  The comment box is gray on videos a lot, but not all. The problem is only on FireFox; I go to the same videos on IE and don't have no problem posting comments. I have Windows 7 Edition home premium service pack 1 64-bit. The problem is new, working fine until a few days ago. I refreshed Firefox to default settings, been through the menus help Youtube and help Firefox.

  Thank you, clear your cookies for YouTube did the job.

• Problem intermittent boot Tecra S2 after pressing the power button

  Hi all
  I have a Tecra S2 with the 6600go GFX card.
  The machine is large but presents the following problem.

  After that the machine was interrupted for a while it will start not reliable.
  You press the power button. Either as soon as you release the power button or a second later (changes every time) the green power light comes on. The fan spins at high speed then slows down to a crawl a few seconds later (as usual) but LCD does not illuminate.
  Also when it does not start USB devices are not initialized (I have a product key dongle which will flash if it is not initialized - when you start the laptop properly this dongle on continuous - a normal start, it is initialized before the ramtest BIOS)

  I've updated the bios a couple of times - it is now 2.4 (I noticed the power button timings were changed in the V1.9) but this has not solved the problem.

  I tried to start on the current with battery removed, ca battery & battery only - the result is the same.

  I can start later button power until the laptop off, wait a few seconds and then try to get back to work.
  After several of these cycles, it will begin eventually to the top. Recently, it seems that it took several attempts before start-up.

  If I have used the laptop for an hour or two and then turn it off it will start almost always a first time.

  If I put the laptop to sleep (orange slow flashing power LED) then half the time that it will continue when you press the power button - the other half of the power LED will switch to the green but the LCD display remains inactive & I switch the power button.

  Any help or advice would be welcome.

  Thanks in advance,
  Robin

  Hello

  This seems very odd.
  First of all: you can boot from USB only if the floppy drive is attached.
  You can boot from these devices USB-drive floppy/disk HARD/ODD/LAN.

  In my opinion the other unit starts the sound not as issues not a software problem.
  I think there could be something wrong with the hardware. But it is not easy to say what it could be exactly.
  You know, the look on the material is necessary.
  I recommend you contact Toshiba service partner in your country.
  They have much more experience in such cases. Guys can run tests and then can give you correct information about the failure.

• Problems of Tunneling comments

  Hello

  I was wondering if someone could help me out here. I followed the guidelines in accordance with the configuration guide estimé WLC regarding the configuration of the internal controller that is simple enough. Mobility anchor is in place with the controller of the DMZ however I do not know what configuration is required on the controller of DMZ itself regarding the DHCP and the WLAN comments himself. To be honest, the documentation is a bit narrow to say the least.

  Any help would be greatly appreciated

  See you soon,.

  Martin

  Martin,

  I share your frustrations with the documentation to access as a guest. Of what you have said that you are having problems with the way in which mobility guest access is configured regarding DHCP. I hope this helps.

  The first part is well documented. Set up a group of mobility between the remote control and the controller of the DMZ. Make sure it is pointing upwards. Now we'll move DHCP configuration.

  (1) on the controller of the DMZ, set up a DHCP pool for invited guests. Make sure that you generate a WLAN and link to the appropriate interface

  (2) on the remote control, your 'management' interface, set the DHCP server or the ip address of the management on the controller of the DMZ interface. Very important!

  (3) build the WLAN prompt on the remote with the same configuration and link its interface to the management interface of the remote control.

  Voila... now, all DHCP requests will be forwarded to the anchoring of the DMZ.

  Thing I can help with made me know.

  -Mike

  http://CS-Mars.blogspot.com

• Enable ASA 9.1 problems with tunnel-group-list

  Hello!

  I try to get a working configuration where the Cisco VPN / DTLS phones VPN connect, while allowing access remotely via client AnyConnect of PCs.  I have two groups of tunnel and configured for this purpose of group policy and use Group-URL.

  Phones are connect very well, but I don't get the drop down menu to choose between the two groups of tunnel when connecting to a remote computer.

  An excerpt from the config.

  Moreover, I had the menu work previously when I used group instead of group-URL aliases.  However, the phones seem to require the URL group.  Now that I have those configured, the menu does not work.  If I get the full URL in the AnyConnect window, both URLs work, and I can connect.

  Thank you in advance for any suggestions you may have!

  Deb

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

  AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2

  AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3

  AnyConnect enable

  tunnel-group-list activate

  ABC Group-Policy internal

  ABC Group Policy attributes

  value of server WINS 10.10.16.17 10.10.16.12

  value of 10.10.16.17 DNS server 10.10.16.12

  VPN - connections 3

  SSL VPN-tunnel-Protocol l2tp ipsec client ssl clientless

  Split-tunnel-policy tunnelall

  field default value abc.com

  the address value AnyConnectPool pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  time to generate a new key ssl AnyConnect 1440

  AnyConnect ssl generate a new method ssl key

  AnyConnect client of dpd-interval 5

  dpd-interval gateway AnyConnect 30

  AnyConnect ask none

  internal strategy of group ABC - STG

  ABC - STG group policy attributes

  value of server DNS 8.8.8.8

  VPN - connections 3

  SSL VPN-tunnel-Protocol l2tp ipsec client ssl clientless

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value Split-Tunnel-encrypt-ACL

  field default value abc.com

  the address value AnyConnectPool pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  time to generate a new key ssl AnyConnect 1440

  AnyConnect ssl generate a new method ssl key

  AnyConnect client of dpd-interval 5

  dpd-interval gateway AnyConnect 30

  AnyConnect ask none

  type tunnel-group Split-Tunnel-Group remote access

  attributes global-tunnel-group Split-Tunnel-Group

  address pool AnyConnectPool

  Group Policy - by default-ABC-STG

  tunnel-group Split-Tunnel-Group webvpn-attributes

  allow group-url https://asa.abc.com/ABC-STG

  tunnel-group ABC - Tunnel - type remote access Group

  attributes global-tunnel-group ABC - Tunnel - Group

  address pool AnyConnectPool

  Group-ACTIVE DIRECTORY authentication server

  Group Policy - by default-ABC

  password-management

  ABC - Tunnel tunnel-group - webvpn-attributes Group

  allow group-url https://asa.abc.com/ABC

  Hello

  You can have group-alias and group-url at the same time in the configuration so that the phones can connnect with Group-url and users can click on the drop down menu to select the right connection profile.

  tunnel-group webvpn-attributes
  Group-alias enable
  Group-url help

  Ref:- http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Network problems intermittent management with more than 1 works ESXi

  Hello

  I had problems since installation with our 2 x ESXi 5.5 nodes running on a Dell VRTX system.

  If I had to run 1 ESXi nodes on its own, it works perfectly, no problems what so ever, but as soon as I start the 2nd node they network for the management network connectivity problems.  However any virtual machine that you are running on them have no problem at all.

  The easiest way for me to check it comes to ping the management network and it will be on one of the nodes timeout, then it will randomly and knitting on this node but timeout on the other, they will never return a ping at the same time.

  
  If anyone has experienced this before? I fight to see if there is a problem with the installation on the ESXi hosts, the network Dell VRTX or our NetGear switch.

  I tried a lot of solutions and been through the different pages of VMware KB but can't seem to find something that suits him.

  The network Dell 8 physical ports are all in one LAG with 2 nodes added, I tried the distinct lag, but that made no difference, I am focusing now on if it is a parameter of VMware to see where that gets me.

  That's how the two nodes are configured.

  

  Solved!

  Finally, I spotted the problem, and VMware technical support fixed it for me.

  The MAC address of each management network was the same!, for some reason, the host of the 2nd got the MAC address of a NIC to host the premiere, don't know how its possible but VMware support restored all of the network settings from scratch and it picked up the correct MAC and works.

  Thank you all for your suggestions.

• HP Pavilion TouchSmart 23-f280: No. Intermittent display problem

  Hi guys,.

  Need your help with this new pc HP Pavilion TouchSmart 23-f280d all-in-one desktop PC.

  all newly purchased this product and had no problem to display but not to start the computer. It will happen only once I used as watch videos or whatever it is around 10 minutes to 20 minutes and the display will be switched off the sound always playing in the background. Later I just be like around a few minutes, then it will be back to normal. but sometimes, when this problem occurs, I tried to leave about an hour but goes blank display.

  Please help me to get the solution on this issue.

  Hello @ali_je24,

  I understand that you have a display problem intermittent with your new HP Pavilion TouchSmart 23-f280d all-in-one desktop PC. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. As with any new unit you want to ensure that all issues are dealt with properly and that they are properly documented.

  I want to thank you for display on the HP Forums. Have a great day!

• Satellite L500 - missed strikes & touchpad to stop intermittently.

  Hi all

  I recently purchased a Toshiba Satellite L500.

  I noticed that when you type, I missed here and there strikes.

  When I press and hold a key that the letter runs as normal then stops then runs again. It occurs intermittently and a pain.

  I also realized that the touchpad is having the same problem - intermittently, he stops for a split second then works.

  Has anyone else had the same problem?

  See you soon

  Hello

  > I have noticed that when you type, I ran out of strikes here and there.
  Have you noticed even when the touchpad is disabled?
  You can disable the touchpad through FN + F9

  Generally, it is difficult to say what might cause this strange thing is that this problem does not appear when the USB mouse is connected.
  Have you installed the USB mouse driver? If so, then a 3rd party driver can cause this

  Also check if your BIOS is up to date
  I read about similar behavior in the past and some people might solve this new BIOS update Setup

• Intermittent Bluetooth on Portege R500

  I have a hardware problem intermittent with the Bluetooth adapter in my two - month, Portege R500 and I would appreciate any comments or second opinions before you attack me it as a warranty issue.

  I use a Bluetooth mouse with my R500 and it was fine for the first five weeks. Then I kept noticing that the mice would be dead for a few seconds at a time. Whenever it happens that the machine does the 'Vista' connect device or its "disconnect device" (a kind of twang). Since yesterday, it has reached the point where there are about ten twang events an hour but the Bluetooth remains ever work for more than a few seconds.

  I found that an easy way to monitor the issue is to disable the external Bluetooth devices (to totally eliminate their effects), leave open device with the Bluetooth expanded element Manager and increase the volume up to hear the "twang" that signals an event of default. Every time that happens refresh the window Dev man and objects reappear or disappear from the entrance of Bluetooth. When everything is ok the following five recommendations are present, but now, for most of the time, there are only RFCOMM.

  a? ¢ RFBNEP Bluetooth
  a? ¢ RFBUS Bluetooth
  a? ¢ Bluetooth RFCOMM
  a? ¢ RFHID Bluetooth
  a? ¢ Bluetooth USB Controller-5 at Toshiba

  When I run the diagnostics of Bluetooth for 'check communication with Bluetooth device' translates 'bankrupt '. The Bluetooth stack was originally v5.10.14 (T). I replaced it with the 6.10.10 new and this has worked, but intermittency is unchanged, so this seems to rule out software problems. Anything I do, as to move the machine or restart, seems to affect when an "event" occurs; don't change when the machine heats or cools.

  In any case it is now obtained in the step where Bluetooth is not usable more so it seems I have to deal with the guaranteed repair procedure.

  You're right about this Johnson. If they see that you have removed the screws on your own it can void the warranty. Be careful with this. You have very expensive laptop and warranty should be valid or maybe you should expand it buy an extended warranty.

  In any case, good luck!

• plugged in, not not supported (Vista problem?)

  My laptop battery gauge continually reads "plugged in, not charging" in the system tray and does not load.

  I tried a number of supposed bugs and none worked including:
  -cleaning of the ports and pins
  -change the battery,
  -change the PSU
  -flashing the bios
  -updated all the drivers
  -type the laptop near the inspiron logo
  -a series of variations on removing the battery stop and restart with the battery inside or outside etc.

  I can get very rarely my battery charge by unplugging and plugging it to my AC adapter. Sometimes after 20-30 minutes to unplug the unit and plug the adapter it suddenly starts to load.

  Note: whenever I disconnect and reconnect the adapter of the intensity of the screen reduced to reflect the power battery and returns plan then to the brighter when I plug in the adapter. which leads to suspect that the laptop is pull on the adapter sector very well.

  Read about various support forums, it seems, it is a problem intermittent for almost all brands and models of laptop owners who all have one thing in common: Vista o/s.

  Therefore, the most likely reason for this problem seems to be a bug not diagnosed in Vista.

  I have run that Visa ultimate 32 bit on a Dell Inspiron 1525.

  I am looking for help on this problem.

  Hello

  How old is the battery and how much use has seen it? It really sounds like a hardware problem so contact
  Dell - perhaps a known issue and also check their forums.

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  ==========================================

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this if your battery has thin slots just clean the knife edges that fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the manufacturer of the system's support, and many have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version
  http://osirisdevelopment.com/BatteryBar/index.html

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps. Rob - bicycle - Mark Twain said it is good.