Problems playing self created discs DVD-R on Satellite M30

Similar Questions

• DVD recorder is not read/write discs DVD-RAM on Satellite A200-1GH

  Hello!!

  I have the problem as the topic - my DVD drive is not read/write DVD-RAM discs (recorder: HL-DT-ST DVDRAM GSA-T20N). Unfortunately, there is no any drivers (more recent than I've got) for this recorder on the Toshiba, not even site on LG or Microsoft. What should I do?

  Greetings

  Hello

  To be honest, it's quite strange. If the laptop is preinstalled with recovery image, it should work. I tested it on my laptop 5 minutes ago and it works. The DVD-RAM disc is readable and different documents can be saved on the disk too.

  Do you use your own installation of OS, or you still have some factory settings?

• Satellite A60: Can play self-created DVDs

  All,

  I have a Satellite A60 with UJDA760 CDRW/DVD drive.
  The drive will not read the DVD (DVD + are not all, DVD - R, sometimes (if the drive is cold (?))).

  This could be a firmware issue? And if yes, does anyone know, where I can find an update for this drive? (I tried the firmware pack - na .zip from the web site of Toshiba, but an update to the reader is not available)

  The drive reads CDs without problem.

  Thanks for your comments!
  Wutz

  Hi Bruno

  You can update the firmaware but sometimes it doesn t solve disk problems.
  For most of these issues occurs because the player doesn't supports different types of DVD or / and CD media.
  Hard drives don't support all DVD. The best way is to test different media from different manufacturers.
  Sometimes, the same media from the same manufacturer doesn t work on the disc. Yes, it seems very strange but it s true.
  Check if you can use other DVDs.

• Playing discs DVD + RW on Satellite S1700-300

  Can I use my Satellite S1700-300 me running to read that DVD + RW burned on a XP PC with a Pioneer DVR - 106D DVD burner?

  The reader Toshiba says that the disc is not recognized.

  If this isn't the case, it would be OK if I burned the DVD - RW discs?

  Hello!

  Yes, you can! Normally, there should no problems with serious DVD. But as far as I am aware that there may be problems with the DVD + R DVD + R more recent than your machine symbolic because. So I think that it is better to burn DVD-r!

  Also, you should test different suppliers because some DVD vendors produce their DVD as the industry standard!

  Good luck!
  Rudi

• Creating discs of recovery for Satellite Pro C660-2JR

  Hello

  is there a way to have the recovery disks installed win7 x 32 instead of x 64 (Satellite Pro C660-2JR)

  If your laptop has been delivered with the 64-bit version, you can create the recovery for this preinstalled only version disk. With other words, saved on the recovery partition recovery image is recorded on DVD disc. It's nothing more than that.

  If you want to use the 32 bit OS, you must check if your phone model is supported for him and install the clean version.

• Problem creating Windows DVD? Or Windows Movie Maker problem?

  Hello!  I created a slide show in Windows Movie Maker, which plays on my computer without problem.  Now, I try to burn it to a DVD by using the Windows DVD authoring application.  I was able to burn my DVDs sucessfully using the wizard and when I put it in the DVD player I get the main menu I created.

  I press play and start my video, but he plays 16 seconds and everything goes black.  Time continues to roll until the full 3 minutes are up, but I have 16 seconds of my film.  I burned 3 DVD and it did the same thing.

  Can someone help me with what I'm doing wrong?

  Hi Khsb14,

  Have a. you been able to watch the video before burning?

  B. did burn the DVD?

  C. is the DVD burner connected properly

  D. is the audio work after the 16^th s?

  E. do you have a mistake when he went to the black screen?

  This could be a problem with the burner DVD or the method of engraving. Try the following methods.

  Method 1

  Previewing your DVD, you can view the photos and videos on this subject. Check if the full video is seen in the preview. This can help you determine if you want to make changes to the DVD before burning the disc.

  1. In the ready to burn DVD page, click Preview.
  2. To read the DVD preview, click play in the control screen.
  3. To control the playback, click Pause , play , previous chapter or next chapter , according to what you want to do.
  4. To display the DVD menu, click Menu. Click on the top, bottom, right, or arrows left to go in this direction on the DVD menu preview, and then click the Enter button to play the selected menu item. Click OK when you are done previewing the DVD.

  Check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  Method 3

  Choose a speed slower burn to your DVD recorder as follows:

  • 1. Return to the Add pictures and video to the DVD page and then click on Options.
    2. In the DVD burning speed box, select medium or slow.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot create Windows DVD, burning the disc - Satellite L350

  Can someone help I'm on a Toshiba satellite L350
  I'm trying to burn a DVD with Windows DVD maker. It is the fourth I've done and the previous ones were all OK.

  I can't burn the DVD, I tried both types of disc and made about 10 attempts today.
  When I try to burn it starts OK then I get about 34% and get an error message

  I had two different error messages, it says "cannot create the DVD error unspecified.". "
  The other says "cannot create DVD catastrophic failure"

  As Akuma wrote, it can be a problem creating Windows DVD and has nothing to do with the functionality of optical disc drive. It is good to check the updates.

  Can you test the WEIRD feature using a different burning application?

• DVD/CD player not recognizing not self-created CDs

  The DVD/CD RW drive has suddenly stopped to recognize or be able to engrave self-created manufacturing CDs. CDs are OK, and can be read or installed. Self-created CDs show CDs as having no content (zero byte), despite me knowing for some that they contain data. Have you tried to reinstall XP SP2 and driver-, but to no avail.

  Seen a few threads on this forum about the problem, but nothing that points to a resolution.

  Rgds

  Hello

  Can you please give some specs on your device? In my opinion, you should try to burn data using two different fires software or try to use the Windows burning option. If there is no success, it is possible that the unit is defect or have a malfunction.

• computer is spit back out dvd but will keep and play the game disc

  have a dell studio, he started being silly, it will read and play the game disc. partially, it reads the disks if recording information. but it wen I put it in a dvd takes it turns around inside like its gona read but it spits out back. IV run virous scans and updates and I cheak all system files and every thing seems OK Please help

  Hello

  Check with Dell Support, their online documentation, drivers, diagnostics and ask in their forums
  on the problems known.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ----------------

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The CD/DVD-rom won't play game, just the DVD and the CD disc.

  Hello. My CD/DVD-ROM won't play the game disc, I have problem with the two "Deer Hunter Tournament', and"The Settlers - rise of an empire". But this station want to write write CD, DVD, and CD playback, so I can listen to music and watch a DVD movie.

  But why my CD/DVD-ROM do not load the game disc?

  I still have the problem, the brackets must be the answer given that these two works of disk on other computers of game.

• Problems playing DVD on Equium L40 - 156

  Hi all
  Mobile complete beginner here, really need help from you guys, the problem I have is in dvd playback in Windows Media player 11 is slow slow and out of sync.
  Toshiba DVD player gives this error: "Modules needed for this application is (are) missing;" If the application restart does not resolve the problem please install the app.
  Windows Media Center gives this error: "the files needed to display video are not installed or are not workin properly, please restart WMC.or you restart the computer,
  Called Toshiba helpline today and felt shocked by the response of women, first use the recovery disc.
  lose all the work i have put or 'buy' an other DVD such as Power DVD player online!
  Still lost for words to make things worse, I'm a Virgin full vista and find my way around the interface
  is not helping my case at all.

  PS: Really happy with the product, outside this niggle.

  Thanks in advance

  Kevin

  Hi you can try and download the codec divx http://www.divx.com/divx/windows/codec/ here who can help with reading problems

• Video playback in the media player in windows (Vista) is perfect. But when I create a dvd in Windows DVD Maker and read the dvd, the sound is off by a fraction of a second on the dvd. Is this a setting problem?

  After burning a dvd, the audio is a fraction of a second offshore on playback of dvd-video.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Check if that helps.

• How to burn image files and videos on a DVD disc to play on a regular DVD player

  I want to burn some pictutes and videos and play in a regular dvd

  what I need I have windows vista

  what I need I have windows vista

  =================================
  Windows DVD Maker might be worth a try...

  Take a look at the following articles:

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - DVD-video burning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Windows Vista - change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to play discs dvd - r on windows media player

  I am running windows 7, you advise please how can I play dvd - r discs using windows media player.

  Thank you

  Hi Mark,

  Thanks for posting in the Microsoft Community.

  I suggest refer you to the Microsoft Help article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

  I hope this helps. Just reply to us with the State of the question.

  Thank you.

• Problems playing and extraction of some discs in WMP

  I have usually no problem playing and ripping disks on my hard drive using WMP (W7). However, I have problems with some types HDCD discs. An example of this is Neil Young's "Greatest Hits", it will not play WMP poster art, the title of the album etc plus all the track names and rip box is checked, but when I click the icon burn, nothing happens. There are no error messages either. Is there a way to turn it?

  Thanks in advance for an answer

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the information, you can not play and rip some discs as HDCD by using Windows Media Player 12 (WMP).

  Since WMP 9, it is possible to decode and play active HDCD CD.

  This problem occurs if the file as HDCD extension is not supported by Windows Media Player 12.

  You can use your favorite search engine to look for a software that can convert the file for use in Windows Media Player.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information on the types of files supported by Windows Media Player, you can also view the following link:

  Information on the types of media files that supports Windows Media Player

  Note: This also applies to WMP 12.

  Also see the article:

  Windows Media Player frequently asked questions

  Hope the helps of information.

  If you need further assistance, please answer and we will be happy to help you.