Playing discs DVD + RW on Satellite S1700-300

Similar Questions

• Problems playing self created discs DVD-R on Satellite M30

  I currently have problems reading DVD-R, I created on my laptop M-30. Would appriciate any solutions, ideas, Suggestion anyone could have.

  The problem
  My DVD - Rw drive refuses to recognize any DVD-R that I wrote using the same drive and software slipped & included. He simply refuses to recognize and when asked just indicates that the disk must be damaged or corrupted. All the tested discs (all 8 of them) worked properly on three other machines, which rules out a problem with the discs.
  Also it does not read discs written, he recognizes DVD-R Virgin and allows me to write for them. indeed written afetr and refuse 2 discs, one with Drag & drop, the other with WinDVD Creater 2, the system refused to recognize. However, they worked correctly on other machines.

  The drive was working properly before, and no major modifications were made to the system. He continues also to recognize and read in DVD-ROM drives trade.

  Would appriciate all ideas, suggestions, solutions to this.

  Hi bbusybookworm,

  that is not easy to give advice, but lets try...

  What Service Pack is installed? SP1 or SP2.

  As far as I know, if you installed SP2, you make updates to preinstalled programs.

  How many burning programs installed, Drag & Drop, WinDVD Creator. What else?

  It could be possible that some programs hamber each other.

  I had this problem with Roxio products and "Alcohol", for example.

  Good bye

• Unable to play HD DVDs on a Satellite Pro P200

  Until recently, I was the proud owner of a satellite Pro P200, but my DVD - ROM drive is not reading disks hd more. I checked the drivers and harware, it plays all other formats very well.

  The drive is a Toshiba DVGW/HD TS-L802A ATA.
  I read some posts where it says iTunes disables some reg keys?

  Someone at - it ideas?
  Thank you very much.

  > I read some posts where it says iTunes disables some reg keys?
  It's don't know not for me but I know a firmware update is available on the Toshiba driver page.
  This Firmware update corrects the errors with some media.
  It s for a DVD HD TS-L802A drive.

  Maybe you could try updating the firmware and check if that helps.

  Best regards

• HD-DVD Wont play HD-DVD on my Satellite P200-123 movies

  I noticed a lot of people have this problem and the answer is always up-to-date software, although mine has been updated through the Tempo software to the latest version of the software and the Toshiba software starts but nothing happens.

  I got the Toshiba free5 DVD and none of them play.
  Thanks for any help.

  Post edited by: ADMIN

  Ive sorted.
  The software had an another player chosen as the default player, simply change it as the source disc in the parameters of the action.

• How to play discs dvd - r on windows media player

  I am running windows 7, you advise please how can I play dvd - r discs using windows media player.

  Thank you

  Hi Mark,

  Thanks for posting in the Microsoft Community.

  I suggest refer you to the Microsoft Help article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

  I hope this helps. Just reply to us with the State of the question.

  Thank you.

• DVD recorder is not read/write discs DVD-RAM on Satellite A200-1GH

  Hello!!

  I have the problem as the topic - my DVD drive is not read/write DVD-RAM discs (recorder: HL-DT-ST DVDRAM GSA-T20N). Unfortunately, there is no any drivers (more recent than I've got) for this recorder on the Toshiba, not even site on LG or Microsoft. What should I do?

  Greetings

  Hello

  To be honest, it's quite strange. If the laptop is preinstalled with recovery image, it should work. I tested it on my laptop 5 minutes ago and it works. The DVD-RAM disc is readable and different documents can be saved on the disk too.

  Do you use your own installation of OS, or you still have some factory settings?

• DVD player does play not any DVD successfully on Satellite L30

  I don't seem to be able to play any DVD on my machine (Satellite L30 PSL33). Sound and image are distorted. Can anyone help?

  What applications do you use to watch DVD? This problem appears with original DVD's?
  Try using the WinDVD.

• Satellite A110: I want to play a DVD but it says: not compatible

  Hi I have a question.
  I have a toshiba satellite a110. But when I want to play a dvd, it says:
  is not compatible...
  :(

  Can't watch movies, how to... :(

  I have installed some software dvd - ram also uninstalled, restarted the laptop.

  Someone?

  Hello

  Are you using the Windows operating system that has been preinstalled on the A110 Sat?
  AFAIK almost all Toshiba laptops come with WinDVD program.
  I also assume the Sat A110 supports this software and you must use it to play the DVD s.

  One question; What DVD did you play? An original or a copy?
  The portable DVD Player supports different DVD region code settings.

  Please check if the region code that was chosen on the CD/DVD drive supports your DVD media!

  For example; you will not be able to play the DVD we s if the region has been set for region 2

• Satellite M40-300: is it possible to make a CD or a DVD for all facilities?

  Hello

  I bought a Satellite M40-300, it's a very good laptop
  I just have two questions:
  is it possible to make a CD or DVD for all facilities
  because I have two partitions. One for the window
  and the other for a linux?

  For Linux I want to install Red Hat Fedora Core 4 all devices are compatible or not? and where I can get driver for this?

  Thank you very much

  PS: Sorry for my English I'm French.

  Hello

  First of all there is no drivers for Linux because Toshiba doesn t supports the Linux operating system. All Toshiba units are shipped with the Microsoft Windows operating system.
  I also work with Linux, but I use a different distribution. I use Knoppix because I n t need to install anything whatsoever on the HARD drive and I can use this Linux as other Linux distributions.

  On a CD/DVD creation: do you know that Symantec Ghost?
  This tool allows to create an image file or a CD/DVD image you OS. I don't know if it works with Linux, but as I suggested, you can use a Knoppix ;) m

  Hoppe these tips will help you make a decision.

  Good bye

• Satellite A200 - 13 M: I can't play a DVD protected by Securom

  Hello!

  I have a Satellite A200 - 13 M with a drive TSST TS - L632D DVD (Firmware TO-04) and Windows Vista.
  I can't play a DVD protected by securom.

  I made an update to Vista, my PC BIOS, but it still does not work.
  If I use an external DVD drive, I have no problem to read DVD protected by securom.
  I don't know what to do to solve this problem. She seems to have no update of firmware for this DVD player/burner.

  Help!

  Michel

  Hello

  I have no similar experiences, but please check if the service called "Securom Services" is active. I'm sure it must be deleted somewhere in the registry.

  In another forum I found something very interesting. Maybe he can help you. Check it out.

  + Crash day - and a warning +.
  January 27, 2006

  + Atari has released a playable demo of a game called Day of Crash. It is similar to Need for Speed: Most Wanted in many ways, but the goal is to destroy the other cars to missiles and miniguns, or do crazy stunts. It's very fun and seem to have some potential - see my screenies, thoughts and tweaks in this thread. +

  + Now, here is the part of the warning. Without wanting to be too dramatic, Crash day demo uses SecuROM copy protection system. It is very annoying and may cause problems on your computer. You can avoid the installation of the demo, or if you install it and then eventually want to uninstall and remove SecuROM, including "SecuROM User Access" Service, it installs under Windows, follow these steps: +.

  + 1. Uninstall the game as usual. +

  + 2. Manually remove the game directory (usually \Program Files\Atari\Crashday-+ demo\)

  + 3. Go to start > run and type "Services.msc" (without the quotes) and press ENTER. +

  + 4. Access the "Securom User Access" Service, double click on it, click on stop and then set Disabled. +

  + 5. Navigate to the \Windows\System32\ directory and delete the file UAService7.exe. +

  + 6. Go to start > run and type 'sc delete useraccess7' (without the quotes) and press ENTER. +

  + Note: Ce Service can be re-created by one of your other SecuROM games, in which case you will have to work to play. +

  + The following steps are very risky and only to those who is certain none of their currently installed games use or need of SecuROM: +.

  + 7. Go to \Documents and Settings\All Users Data\ and remove the SecuROM subdirectory. +

  + 8. Go to start > run and type "Regedit" (without the quotes) and press ENTER. Then find the + * HKEY_LOCAL_MACHINE\SOFTWARE\SecuROM * + key and delete it if possible. +

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!

• CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• DVD player will not play disc 1, but will play 2-6 What can I do?

  I have Criminal Minds season 1. 6-disc. Disc one just turns and clicks on and will even play open in Windows media, but 2-6 player. What can I do?

  Hello

  Another outside Criminal Minds DVD plays on the computer?

  Try the steps listed in the links below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  How to troubleshoot problems that occur when you play a DVD in Windows XP: http://support.microsoft.com/kb/308012

• Windows media player cannot play the DVD because the disc prohibits playback in your region of the world.

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "I'm getting it on all the DVD and video files now. Have downloaded new codacs did not help. Have you tried the fix auto, has not helped. Tried to download Media Player 11 but keep getting redirected to the checkout page. I have a valid version of windows Vista 32-bit.

  original title: windows media player

  The following article might be worth a visit.

  Windows Vista - change DVD region
  http://grok.LSU.edu/article.aspx?articleid=2334

  Please be aware that when you used all permits
  changes (5 max) region... it will stay on the last region.

• Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  Windows media player dvd region

  After you apply an update to the media player, I now get the error message

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »

  natuarally ive checked the area defined for the reader and even tried to re applying the region

  I then noticed its doing the same thing with dvd stored on my media server, and while he would not even play MPEG or avi stored on my hard drive

  I went to my comments to logon (standard user) media player works fine

  so I'm back and tried to reinstall the mediaplayer to my admin login, it wouldn't let me not delete it, ran Media Player microsoft penalty shooter, he said everything ok

  so I changed the guest account on an admin account to try to remove it from there, but as soon as I did this mediaplayer stopped working in the feedback connection that leads me to believe its a sort of level access virus, that has permeated the media player or a defect in this connection required to complete admin update media player

  Hello

  ·         Have you tried the steps in method 1 of troubleshooting?

  ·         Do you have any code or an error message when you try to uninstall Windows Media player?

  Method 1:

  You can try to connect the different DVD player and check if it works.

  Method 2:

  You can re - register wmp.dll file and check if it helps.

  (a) log on as an administrator.
  (b) click Start, type cmd in the Search text box, right-clickcmd.exe, click run as administrator, and then click on continue.
  (c) at the command prompt, type regsvr32 wmp.dll press ENTER.

  Method 3:

  You can also try to create a new administrator user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account