Problems, problems and more problems.

Similar Questions

• Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

  Apparently Apple has stopped now updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  Someone just posted in another thread that it may be active again. I can't check it, because they haven't posted a link about her being active again, and I've already updated all my devices, I can't be sure. Maybe something to watch.

• Problem Manager of horizontal scrolling for OS 6.0 and more?

  Hi all. I have a problem with the Manager of Horizontal scrolling. Every thing worked for OS 5.0 and below, the question arises for OS 6.0 and more. For example, check the following:

  I have 2 HFM added to the optimization of resources.

  HFM1 - contains 2 buttons.

  HFM2 - contains 6 buttons, and the user can scroll between the buttons.

  The questions is when user keep hitting the right key, when the focus is on the second button of HFM1, then the content of HFM2 scrolls to the right - what is bad behavior.

  Check the screenshot for Simulator 9810 (when scrolling to the right inside the HFM which contains the test1, test2 scrolls the second HFM):

  

  Scrolling in a managing scrools in another, why this happen and how that might be solved?

  Thank you in advance.

  Finally, I found a solution using ScrollChangeListener (SCL).

  So what I did I set the SCL for HFM2, then:

   public void scrollChanged(final Manager manager, int newHorizontalScroll,
              int newVerticalScroll)
      {
  
          //----> fixing the issue when one HFM scroll another one for OS 6.0 and above
          int fwf = manager.getFieldWithFocusIndex();
          if (fwf == -1)
              manager.setHorizontalScroll(0);
          //<---- fixing the issue when one HFM scroll another one for OS 6.0 and above
  
  }
  

  Thanks to all in any case.

• I changed my HD 'C '. After the reinstallation of P element 2, I had a problem. I can't open Photoshop Element.  Error message is "your scratch disk is full", but I have free 61Go on hard 'C' drive and more 1 TB free on the disk "D".

  I changed my HD 'C '. After the reinstallation of P element 2, I had a problem. I can't open Photoshop Element.  Error message is "your scratch disk is full", but I have free 61Go on hard 'C' drive and more 1 TB free on the disk "D".

  Try to reset the preferences of pse 2 and see if that clears things up to the top.

  Reset preferences

  Press and hold down the Shift + Ctrl + Alt keys right after the beginning of the launch of the EP 2

  Keep possession of the keys down until you get a dialog box asking if you want to delete the settings Adobe Photoshop Elements

  Press Yes

  
  

  
  

  
  

  
  

• Does not start, need more and more memory, then crashes. It is SOLVED by deleting DB, panacea.dat, foldertree.json CAUSE global messages: uknown

  As a user of Thunderbird long term (currently version 38.2.0 on Win7 x 86 US) today, I caught myself (negatively) by the following problem: at the launch at the start of Thunderbird, the window will appear last closed (and for a short while, I see my files, etc., as left behind, during the last closure of Thunderbird), but then it turns into State "Not responding" (nothing works). When we look in the Task Manager, I see that Thunderbird seizes more and more memory, before this date - after a few seconds - crashing. I really hope that for some help fast, if possible (I desperately need a solution for e-mail job well - ideally the one I had, i.e. Thunderbird with my settings).

  What I tried:
  -Uninstall Thunderbird and install it again (did not help)
  -Uninstall Thunderbird and install an older version (I tried 38.1.0, 38.0.2, and 31.8.0 - nothing has worked)
  -from Thunderbird in SafeMode (same problem)
  -from Thunderbird in safe mode of Windows (same problem)
  -from Thunderbird in offline mode (did not help)

  My main question to know how to solve this problem, includes questions such as
  ? Should I try to delete some files of Thunderbird and try again (which ones?)?
  ? Can I use a command line "tricks" to get Thunderbird started?
  Etc.

  Thanks for your help!

  I think I solved my problem: delete messages from global reach DB and panacea.dat foldertree.json helped - once Thunderbird started again interactively and now I can restore my data files/messages.

• age of empires III want to open a session and more does not exclude the password

  age of empires excludes newspapers want III and more don't the password says error 102 and that it's a rong password or username of rong both are correct since I made it for the last year now what is happening and have I been hacked? by another player

  Hi TomWakefield,

  1. have you done any hardware changes or software on your computer before this problem?

  2. what operating system is installed on your computer?

  You can follow this link & check if the problem persists:

  Error message when you connect to a game online of Age of Empires III: "failed connection account: [102] invalid username or password".

  Reference: Articles on Age of Empires III

  Support for common issues of PC games

  Hope the helps of information.

• Error 80070490 continues. Fix - It of MS, analysis system, sfc/scannow tool and more do not help. Please can you help me walk me through this WITHOUT formatting and starting over?

  Error 80070490 continues.  Fix - It of MS, analysis system, sfc/scannow tool and more do not help.
  I can't use the Windows installation CD because the 'upgrade' option is NOT available!
  Seems like everything is against me trying to find a way to solve this error.  I have run these scans,... rebooted several times and no luck.   Spin on a startup select too trying to solve probs.  I use MS Security Essentials that updates automatically. : (Had this problem 6 months ago and email support walked me through to solve.)  However, the link to that support is no longer available.   I would LOVE it if MS Fix - It really solve problems WU, but not for me and it looks like a lot of people posting here have the same chance.

  Running Windows Vista Home Edition with SP 1 and SP 2.   All Windows updates are automatic until almost a month ago.

  Microsoft Security Essentials auto updates, scheduled full scans.  Scanned for malware and some found and removed.
  All MS site suggested I have try, I tried.  Fix, it doesn't do a thing.
  HELP :)

  Please refer to this post by another user:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/code-error-80070490-checking-for-Windows-updates/4e8d0b9c-267f-46fa-9963-ea344ec886e1

  I hope this link helps and good luck Toni J...

• When I install IE9, my printer Canon wireless stop working and more shows on my network

  When I install IE9, my printer Canon wireless stop working and more shows on my network, accordingly. I am reluctant to reinstall IE9... of ideas? I use Windows Vista

  Hello
  • You receive an error message when printing?
  • What is the model of the printer?
  • Do you still have Internet Explorer (IE) 9 installed on the computer or you have returned back to IE 8?

  If you have IE 8 then I suggest you to install IE9 and check the error message when you try to use the Canon printer.

  You can also follow these links:

   
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• Four years and more: no network, no network, no network...

  Four years and more: no network, no network, no network...

  I have three Windows machines: two 7 running an XP running. I posted here and elsewhere to infinity, bought a new router (Cisco) and am not able to find even the most basic explanation for what is wrong. I am invited to a "user name" and password when I try to access the network (which, in the network and sharing Center, recognizes the other Windows 7 system).

  I DON'T KNOW WHAT IT MEANS "USER NAME". I walked so systematically the computer name, or the name used to identify my primary system (on which I work to establish the network connection). Then I copy and paste the password on this computer. I then - FOR FOUR YEARS - get a big red X and a logon error.

  I am middle-aged and refuses to learn all other operating systems. Microsoft holds my soul online. This isn't a screed; He is really sincere indignation that this issue is made infinitely more difficult to establish that she should NEVER have been.

  Thanks in advance for any help. I don't know even why I keep longer. (Yes, I ran a few offensively childish tool called Fix - It, who said that I have problems of network...)

  Oh, Tommy Stanley, please read again. I did, and the DOS prompt has three entries. The first was a Director. The second was invited. The third was my first and last name.

  BUT WHEN I TRY TO LOG ON TO THE NETWORK, THE NAME OF THE COMPUTER - THAT OF MY NAME ONLY (NOT THE THIRD ENTRY THAT APPEARED ON THE PROMPT BACK - I. E., MY NAME AND SURNAME) TO POSTER. How can I get the Windows security log - on, which lists the NAME of the COMPUTER and asks for the password and eternally rejects the connection to the network, either use administrator or guest or my name and surname? I am the administrator, then why don't the Security Windows log - they say "Administrator"?

  What is the meaning of your last question - the third listed name? If THIS is the name that appears on the Windows log - on, security why it doesn't appear? (Again, I have NO user account with my first and last name).

  You're not * the * administrator.  Since Windows Vista, you can be * a * user administrator-level, but only with some effort would you connect as * the * administrator account.

  If there is a name in this list (from the command, I have given you), it was your first and last name - which * is * a user on your computer.  You can choose to believe that or not – but it's done.

  Your user name * is * of course your name and first name (Yes, user names may have spaces, etc in them.)  It will not just "appear" anywhere... When you connect remotely to this computer to another, you must type in the full username and the password to access all the actions that the user shared...  Or... NOM_ORDINATEUR\NOM_UTILISATEUR.  So, for example if your computername was "ShenansPC" and your username is "Tommy Stanley", then you would need to put the quotation marks around that and your complete username would be "Stanley ShenansPC\Shenan" (the quotes help to manage the space).  -You will manually need to know that when connecting to a share on the computer "ShenansPC" - he does not know the first time for you.

  This will be particularly true for the Windows XP computer - but with the good use residential groups, not so much for between two windows 7 machines.

  Another way to look at the accounts of actual users on this machine...

  Press the "Windows" key and the "R" on your keyboard at the same time key to bring up the dialog box "RUN."

  Type:

  Control userpasswords2

  Click OK.

  It will list users 'Users' tab (display not 'Guest' or 'Administrator' - I think that if they are not activated.)  However, it is not necessarily where I want you to look at.  At the top is another tab (Advanced) - select it and halfway and then locate and click on the button "Advanced".  Which will open the consol lusrmgr where you can select 'users' in the left column and see in the column right or middle, a list of all users on the computer.  See your full legal name here?  That's because it * is * a user.  ;-)

  What do you mean 'network connection '?  You mean on the one hand you have created?  A folder that you shared or a printer?  If you try to manually map or use the browser of network card \\COMPUTERNAME\foldershare or \\COMPUTERNAME\printershare?

  Also, you said residential groups.  I think you should read the following article and follow through it.  It really explains things in detail and would like to get your two machines speaking Windows 7, I think that, at the very least.

  http://www.7tutorials.com/HomeGroup-feature-how-it-works

  You will probably need to reconfigure your homegroup - time two machines have the same OS and are on the same network is not because they just see and communicate without some configuration to make sure.  :-)

  Now - in addition - truthfully to make things easy, I suggest the purchase and installation of some SIN (storage attached network) houses that you essentially drop into your network and then accessed from all the computers on your network (whether with or without a user name or password - what is usually to you.)  Most are fairly simple to connect and give the advantage to have a place to stuff your local computers backup, but also a central location for media files, that you want to share among everyone on your network.  Start with a simple, like the GoFlex Home Network Storage System: http://www.seagate.com/www/en-us/products/network_storage/home-network-storage/ that would require very minimal knowledge (can you plug a cable or two and install the software?) to get there.  :-)

• stop windows media player, hogging resources so on my network, it happened gradually 25% and more cpu whenever I turn on my computer

  My victory/med/pl holds 25% and more on my network exe I have suspended it Task Manager, so to work on what the * is past I win 7 and just before it, I downloaded visual basic 2008 express, I really am a novice and I wonder if there is anything I can do to be sure I don't make any stupid mistakes that don't mess my computer , because it is already running a fraction of how it is used to do before you download vb express.

  Hello

  1. do you get an error message?
  2. don't you make changes to the computer before the show?

  Method 1
  I suggest you run convenience store of settings for Windows Media Player and see if that helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  
  Method 2
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  See also: optimize Windows 7 for better performance
  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  Note: When you run disk Cleanup you may lose files that are not used for a long time. And when you run spyware check you may lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.

• My recovery file is full and more limit. How can I remove back unnecessary ups and delete files.

  My recovery file is full and more limit. How can I remove back unnecessary ups and delete files.

  I tried below it gave me an error. Kindly tell me what steps to take to remove unnecessary files and add additional space to my recovery file.

  Thanks in advance

  RMAN > target /.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00558: error occurred during parsing of order entry

  RMAN-01009: syntax error: found 'target': expected an a: "advise, allow, a.

  lter, backup, @, catalog, change, configure, connect, convert, copy, create, cro

  sscheck, delete, drop, duplicate, leave, flashback, grant, host, import, list, mo

  UNT, open, print, quit, collect, register, release, repair, replace, report, res

  HE, restoration, resync, revoke, run, sending, game, show, stop, coil, sql, start

  pass, carry, cancel the registration, update, validate, {,'

  RMAN-01007: line 1 column 1 file: entry standard

  RMAN > delete archivelog all;

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the delete command at 09/02/2014 20:48:19

  RMAN-06171: not connected to the target database

  RMAN >

  Hello

  If you could not ask about your db, you can watch in the log_archive_dest_1 parameter, which is in the init.ora file, to know where are your archived log files.

  my previous post would not be the solution to your problem, if so you can manually delete the archived logs and then delivers the command of rman below

  overlap archivelog all

  Concerning

• Storage of more and more without reason

  Hi guys

  ESX 3.5

  yesterday I went to a customer from storage for their virtual machines had left 20 MB... they had a few problems I moved a virtual machine in another data store and we were OK.

  everything seemed that instant were the culprit but today they had the same issue due to lack of new VMs and the same data store had 800 MB left

  so my question is what could be the cause this problem? What is more and more without our permissio? VMDK? Open a session?

  What shoul logs that I check? any known problem?

  There are 4 datastore and it only happens on one of them

  Thank you very much

  Browse you all folders on the data store to check the shots?

  3.5 there is no thin provisioning (the least not officially supported) so the snapshots are the only reasons for a data store growth (with the exception of records created manually, for example, ISO standards...)

  André

• DPS HELP TO SINGLE PDF AS V25 AND MORE!

  WHERE IS MY BEAUTIFUL UNIQUE DPS HELP PDF! THE CURRENT ONLINE HELP SYSTEM SUCKS... CANNOT LOGICALLY NOTHING FOUND...

  PLEASE PLEASE DO THE DPS HELP AVAILABLE AS PDFS AS ALL VERSIONS OF 25 AND MORE...

  Post edited by: mark@easeltraining

  The current PDF version of help (v28) has been staged, but it has not been pushed live yet. The displayed PDF file is still v26:

  http://helpx.Adobe.com/PDF/digitalpubsuite_reference.PDF

  For the record, a different team of Adobe is responsible for the design of our help pages. I heard that there is an ongoing overhaul that will give a persistent navigation structure and include a landing page better. I have no more details than that. Until then, I think that the best way to find that content help DPS is to use Google or Bing and type "dps [subject],' such as"dps sidecar"or"integrative dps ID ".

  If you have more specific comments on our help pages, please contact me directly (bbringhu at adobe dot com) and I'll do what I can to fix the problem.

• How can I edit a PDF file to have an expanded text box and more small margins?

  I just read a long discussion initiated by a guy who wanted to reconstruct a PDF file to print less pages. I do not ask this topic. I am aware that Acrobat 9 Pro will not recompose the pages in a PDF for you. as someone has said, it is not a word processing program. I want to copy a PDF file into a new file with an expanded text box and more small margins, so I can read it more easily. My view is not so great.

  I try to print a U.S. supreme court decision, for my study. The problem is that these PDF files of such decisions are composed of 10-points with generous margins, in pages of Folio-size smaller than 8 1/2 x 11 "." When you open PDFs of these decisions, you get the margins very broad and relatively small characters. Essentially, I would like to re-rasterize the document so it prints on my 8 1/2 x 11 "paper in a larger size of apparent type, but at the same high resolution as the original. Moreover, the decision that I'm getting is almost 200 pages long, so I won't do that, of course, in a page-by-page manner.

  I guess I could do it in Photoshop, in pages to blow and their culture. Photoshop does a good job of eliminating aliasing when you do this. But it seems to me better to re-rasterize pages of the source PDF file. If any player would be nice enough to explain this process? (I'm fairly warned in Photoshop, Illustrator and printer of computing concepts, but a complete newb in Acrobat).

  If you want just this for printing, one thing you can easily do is to crop all pages to remove the margins. For example, you can RP 2 "on the left and right sides, and 1.5" off the top and bottom. Then print using a Scaling of the Page to "adapt to the printable area.

  To crop in Acrobat 9, select: Document > Pages of culture

  Be sure to select all for the page range.

• This Esinter 90% and more NECK usage in activity monitor

  Check with Etrecheck, I see a flag for 98% of CPU usage in the list of best processes for "esinter."

  This is confirmed by Application Monitor (it the percentage varies, of course, but is constantly around 90% and more mark).

  I tried to quit and Force Quit 'esinter' in the activity monitor, but it comes back after a few seconds.

  What is this and how do I get rid of him?

  / Library/Application Support/ArcSoft/esinter/esinter.app/Contents/MacOS/esinter

  You have installed the ArcSoft software.

• PDF. JS is no longer compatible with Firefox 35 and more. Why is it not be deleted?

  Noticed that PDF Viewer PDF. JS is not compatible with Firefox version 35 and more.
  Then why not delete it?
  Wine

  Since you have already installed, why not just update?

  For what is 'user' vs 'Developer', like the other reviewer mentioned, pdf.js is already integrated into Firefox for quite some time now and is enabled by default. There is nothing that needs to be installed unless you want to keep testing the 'extension' version which updates with new features and fixes more frequently than update of 6 calendar weeks for versions of Firefox. If this is the case, just update.

  https://github.com/Mozilla/PDF.js
  Scroll to the getting started > browser Extensions, Firefox-> development Version = click on it - then 'Allow' the hanging door that appears below the address bar on the left side.

  I saw your answer 2nd straight - on PDF. JS modules Web site. I don't see that what listed there more. I have no idea if or why it was deleted, but it will always update this area for users who have already installed. If someone else wants the extension, I guess they will have to get it from GitHub. I can only speculate that, overall, it is sufficiently developed by now that Mozilla doesn't have users more to test the advanced version and code that comes in Firefox works well enough.