Problems related to vCO Web Services and WaveMaker

Similar Questions

• problem connecting to the web services server

  I tried to download the latest updates of software/firmware for my all-in-one HP Photosmart Prem C310a.

  I can't get updates or activate Web Services because it still gives me the error message "problem connect to the web services server.

  I tried everything in the section of the Web of HPs site including connection via WPS - unsucessfully problems.

  I understand that you have found impossible to connect to the server error message on your printer. I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer
  a. This can be done by pressing the icon on the printer wireless.
  2. Enter the printer's IP address in a browser.
  3. Select the tab network at the top of the page.
  4. on the left, select network.
  5. Select Network (IP) address
  6. select manual DNS server
  a. manual Preferred DNS should read 8.8.8.8
  b. alternate DNS server should read. 8.8.4.4
  7. Select apply you could get a fair warning select OK.

• How to connect to an Adobe Javascript(Folder Level Script) SAP Web Service and retrieve the response in a table of the Adobe Javascript/AcroJS. Could you please it explain with an example. I have two required input parameters that must be filled.

  How to connect to an Adobe Javascript(Folder Level Script) SAP Web Service and retrieve the response in a table of the Adobe Javascript/AcroJS. Could you please it explain with an example. I have two required input parameters that must be filled.

  I s generic SOAP example/tutorial on my blog: get a serial number in a form using SOAP - KHKonsulting LLC

  The web service uses only a single parameter, but you should be able to adapt the code to two arguments without problems.

• How to enable web services and search for printer email address

  I am trying to sign up for the monthly INK from HP.  As part of the application, they ask me a CODE.  However, I can't CODE because I am advised that my Web services are not enabled.  How to enable Web services so that I can complete my application?  Thanks for any help you can offer me.

  Hello

  What model of printer you have?

  Assuming your eprint-enabled printer, please follow the steps below to connect to web services and get your email from the printer.

  To find printers e-mail you need to enable web services from the front panel of the printer. It is normally a button on the front panel or an option in a menu.

  The printer will be connected to your WiFI network, and once the device is activated, it should display a page with a code composed of letters and numbers. It is the e-mail address of printers (when you add a @hpeprint.com to it).

  Once you have this, go ahead and configure a connected HP account and register the printer to your account. This will allow you to manage settings of the ePrint printer but also to track the history of the work.

• The consumption of web services and paging data.

  Hi all

  I am building an ADF application where I need to make web service calls to two different external systems. Each of them say return 50 records. On the user interface, I want to display 10 records at a time. Also, I need check duplicate records.

  What is the best approach in this case. Will I call the web services and generate the data in a temporary table and ADF - BC allows to display these data on the user interface. In this case set the data of a given user will be a challenge. Or will I programatically create 100 your and use them to display data on the UI (tabular) with paging option.

  Help, please!

  Yes, the pagination of POJO would be appropriate.

• Basic authentication with the RESTful WEb service and a Web Service reference

  Hi all
  
  We have made significant progress on getting an application to work with RESTful web services, but are now trying to understand how to lock a RESTful Web service while making it available for a particular application.
  
  We use one of the 'emp' table sample web services come with Apex 4.2 and are trying to apply the Basic Auth to the WEb Service using Weblogic filter defined in the web.xml file. Which works very well. I now get challenged when I try to go to:
  
  https://wlogic.edu/Apex/BNR/ACE/HR/empinfo/
  
  And when I authenticate this challenge, I am able to get the data. (we are usiing the Weblogic-level LDAP authentication)
  
  However, I'm not sure how to get even basic authentication to work with Web Service reference in my application. I see the error message in the application when I try to call this Web Service:
  
  401 Unauthorized <
  
  And I see:
  "The request requires user authentication. It MUST contain a header field WWW-Authenticate (section 14.46) containing a fault that is applicable to the requested resource. The client MAY repeat the request with a suitable authorization (section 14.8) header field. If the request already includes identification of the authorization information»
  
  How can I provide the credentials in the Web reference or provide credentials in the Application?
  Web service works fine if I remove the auth basic RESTful web service in the Web.xml file.
  
  We should NOT use basic auth and auth Weblogic web service definition basic RESTful Workspace use instead. If so, how would we implement THIS basic authentication in the definition of Web Service and the Web SErvice reference on the application?
  
  Thank you
  Pat

  Hello Scott,

  Thank you. There is a function for rest in the package:

  function make_rest_request(
  --
  -- This function invokes a RESTful Web service with the supplied name value pairs, body clob, or body blob
  -- the response as an clob.
  --
  -- Arguments:
  --   p_url                  The url endpoint of the Web service
  --   p_http_method          The HTTP Method to use, PUT, POST, GET, HEAD or DELETE
  --   p_username             The username if basic authentication is required for this service
  --   p_password             The password if basic authentication is required for this service
  --   p_proxy_override       The proxy to use for the request
  --   p_body                 The HTTP payload to be sent as clob
  --   p_body_blob            The HTTP payload to be sent as binary blob (ex., posting a file)
  --   p_parm_name            The name of the parameters to be used in name/value pairs
  --   p_parm_value           The value of the paramters to be used in name/value pairs
  --   p_wallet_path          The filesystem path to a wallet if request is https
  --                          ex., file:/usr/home/oracle/WALLETS
  --   p_wallet_pwd           The password to access the wallet
  --
      p_url               in varchar2,
      p_http_method       in varchar2,
      p_username          in varchar2 default null,
      p_password          in varchar2 default null,
      p_proxy_override    in varchar2 default null,
      p_transfer_timeout  in number default 180,
      p_body              in clob default empty_clob(),
      p_body_blob         in blob default empty_blob(),
      p_parm_name         in wwv_flow_global.vc_arr2 default empty_vc_arr,
      p_parm_value        in wwv_flow_global.vc_arr2 default empty_vc_arr,
      p_wallet_path       in varchar2 default null,
      p_wallet_pwd        in varchar2 default null ) return clob;
  

  My point was that using the API makes things easier if you have to look for a solution.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Web services and wsdl for beginners

  Hi I wonder if someone could you help me , I need a guide on the way to create , consume et publish a web services and wsdl in jboss for beginners using the tools of eclipse or netbeans.
  
  Thank you very much

  Web services based on Java works very well (such as those created in other languages), and I find the JBoss Eclipse pretty easy to use tools.  If you use the LiveCycle ES Server products, you can create a workflow and that using a breakpoint web service expose as well.

  As you build on the reverse for a PDF form I would say maintaining literal web services (as opposed to the PRC).  You can keep to simple object types as well (string, int, etc.), because it will facilitate the binding.

• Problem running the report with the Web Service and BI Publisher

  Hello
  
  In fact, I'm trying to run a report of Bi Publisher via the Web Service.
  I use the following documents:
  -http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10416/bip_webservice_101331.htm
  -"How to integrate Oracle BI Publisher via Web Services in the form of Oracke.
  
  Everything works fine. But when I try to copy the file on the local computer is 0 length. I use the method of "getReportBytes".
  Here's the code I tried with:
  
  String userName = "Administrator";
  String password = "Administrator";
  
  System.out.println ("calling" + myPort.getEndpoint ());
  System.out.println (myPort.validateLogin (username, Password));
  
  ReportRequest repReq = new ReportRequest();
  RepRes ReportResponse = new ReportResponse();
  
  repReq.setAttributeFormat ("pdf");
  repReq.setAttributeLocale("en-US");
  repReq.setAttributeTemplate ("sales world");
  repReq.setReportAbsolutePath ("/ Sales Manager/World Sales/World Sales.xdo");
  
  repRes = myPort.runReport (repReq, userName, passWord);
  System.out.println (repRes.getReportContentType ());
  
  Byte [] binaryBytes = repRes.getReportBytes ();
  OutputStream out = new FileOutputStream ("D:
  out.pdf");
  out. Write (binaryBytes);
  out. Close();
  System.out.println ("success for performance report');
  
  Thanks in advance.

  Hello

  I assume you are using 10.1.3.4. Otherwise, my index is not relevant to you...

  There is a new parameter in the web service API to set the size of the segment. HéLas is by default not so, the behavior is as in versions (not size segment... the entire document at once). If you set the size of segment-1, you should get your document. So, try adding
  repRequest.setSizeOfDataChunkDownload(-1);

  concerning
  Rainer

• Make Image more using the Web Service and Ksoap2

  Hey all, I was wondering if someone can help me with a problem. I use a .net web service that grows on a collection of person objects when a person runs a query from the blackberry phone. To implement this I'm using ksoap2. In my service, I'll send in a string as a parameter. I returned the collection of people that contain the firstname, lastname, address, race, sex. I also try to send a picture. Now, I got this works very well when you do not include the image settings.  In my class on the side of .net in person my class, I have 'image' public property which is a string. I get the bytes of the image and convert it to a base 64 string:

  MemoryStream ms = new MemoryStream();

  System.Drawing.Bitmap.bmp = new System.Drawing.Bitmap (imagePath);

  BMP. Record (MS, System.Drawing.Imaging.ImageFormat.Bmp);

  p.Image = Convert.ToBase64String (ms, GetBuffer());

  BMP. Dispose();

  Mrs. Close();

  Note: in my outings, I see the 64Encoding string.

  On the side of blackberry, I have:

  Byte [] imageArray = ((person) personVector.elementAt (i)).image.getBytes ();

  EncodedImage = bitmap

  EncodedImage.createEncodedImage (imageArray, 0, imageArray.length);

  gridMgr.add (new BitmapField (bitmap.getBitmap ());

  Unfortunately, my number of vector appears as empty and I keep get get a parse error. As I mentioned before, if I remove ownership of the Image on both sides, it works like a charm.  I tried to use just about everything. Any ideas on how to overcome the image using ksoap? I tried to make the image property in the two classes as arrays of bytes, but he had no success. My problem when you use the byte array was in the class of person on the side of the blackberry for the PropertyInfo, that I didn't know what to use (for example STRING_CLASS, OBJECT_CLASS, LONG_CLASS); in any case, neither worked. What do you suggest me?

  I was able to do successfully the bytes of the image the device in the following way in my seriealize class.

  In the getProperty method, I use the following:

  info.type = MarshalBase64.BYTE_ARRAY_CLASS;

• the RESTful web service and database NoSql.

  I configured a database version Oracle NoSQL 3.0.5.

  I wrote the below 12 c JDev RestFul web service.

  the Rest works well, but when running query (GET) it returns the following error.

  I don't know how to correct it. Need help

  package store;

  import com.hp.hpl.jena.query.Query;
  import com.hp.hpl.jena.query.QueryExecution;
  import com.hp.hpl.jena.query.QueryExecutionFactory;
  import com.hp.hpl.jena.query.QueryFactory;
  import com.hp.hpl.jena.query.ResultSet;
  import com.hp.hpl.jena.query.ResultSetFormatter;
  import com.hp.hpl.jena.query.Syntax;
  import com.hp.hpl.jena.rdf.model.Model;

  Import javax.ws.rs.GET;
  Import javax.ws.rs.Path;
  Import javax.ws.rs.Produces;

  Import oracle.kv.impl.api.ops.Get;

  Import oracle.rdf.kv.client.jena.OracleModelNoSql;
  Import oracle.rdf.kv.client.jena.OracleNoSqlConnection;

  @Path ("store")
  public class StoreResourceHandle {}
  public StoreResourceHandle() {}
  Super();
  }

  public static String queryStoreNoSQL() {}
  String StoreName = "semep;
  String HostName = 'localhost ';
  String HostPort = "5000";
  String szModelName = "http://example.org/Captation";
  String ModelName = "http://Repository";
  OracleNoSqlConnection conn = OracleNoSqlConnection.createInstance (StoreName, HostPort, HostName);
  Model = OracleModelNoSql.createOracleModelNoSql (ModelName, conn);
  
  String szQuery = "SELECT? s? p? o\n +.
  "where {\n" +
  "  { ?s  ?p  ?o}\n" +
  "}";
  

  
  System.out.println ("Execute query" + szQuery);
  
  Query query = QueryFactory.create (szQuery, Syntax.syntaxARQ);
  QueryExecution qexec = QueryExecutionFactory.create (query, model);
  ResultSet results = qexec.execSelect ();
  String textResults = ResultSetFormatter.asText (results);
  
  qexec. Close();
  Model.Close ();
  Conn.Dispose ();
  Return textResults;
  }

  
  @GET
  @Produces("text/plain")
  public String getStoreQuery() {}
  String result = StoreResourceHandle.queryStoreNoSQL ();
  System.out.println ("result");
  return the result;
  }

  }

  [Running the application on IntegratedWebLogicServer StoreResource...]
  [21: 45:44] StoreWebApp.war of Module Web recognized in the project Store.jpr
  [Another instance of the storeresource application is running on the server.  JDeveloper redeploy the application.]
  [21: 45:44]-deployment began.  ----
  [21: 45:44] the target platform's (Weblogic 12.x).
  [21: 45:44] recovery of the existing application information
  [21: 45:44] analysis of the dependence running...
  [21: 45:44] deployment 2 profiles...
  [21: 45:44] wrote on the Web for C:\Users\memus\AppData\Roaming\JDeveloper\system12.1.2.0.40.66.68\o.j2ee\drs\StoreResource\StoreWebApp.war application Module
  [21: 45:44] wrote the Module Enterprise Application to C:\Users\memus\AppData\Roaming\JDeveloper\system12.1.2.0.40.66.68\o.j2ee\drs\StoreResource
  [21: 45:44] application is not transferred
  [21: 45:44] the constriction of context following URLS have been defined and can be used as a starting point for testing your application:
  [21: 45:44] http://localhost:7101 / StoreResource-store-context-root
  [21: 45:44] time to deployment: 1 second
  [21: 45:44]-deployment is complete.  ----
  Run start time: 554 ms.
  [Application running on IntegratedWebLogicServer StoreResource]

  Target application w- http://localhost:7101/StoreResource-Store-context-root/resources/application.wadl

  Target URL - http://localhost:7101 / StoreResource-store-context-root/resources/store
  < 25 may 2014 21: 45 CEST > < error > < com.sun.jersey.spi.container.ContainerResponse > < BEA-000000 > < exception contained in MappableContainerException could not be mapped to a response, re - throw to the HTTP container
  java.lang.NoClassDefFoundError: oracle/rdf/kv/customer/jena/OracleNoSqlConnection
  to the store. StoreResourceHandle.queryStoreNoSQL (StoreResourceHandle.java:41)
  to the store. StoreResourceHandle.getStoreQuery (StoreResourceHandle.java:68)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
  Truncated. check the log file full stacktrace
  >
  < 25 may 2014 21: 45 CEST > < error > < HTTP > < BEA-101017 > < [ServletContext@10446167[app:StoreResource module: StoreResource-store-context-spec: null, path root-version: 3.0], request: [ weblogic.servlet.internal.ServletRequestImpl@1e35577
  GET StoreResource-Store-context-root/resources/store HTTP/1.1
  Connection: TE
  TE: trailers, deflate, gzip, compress
  User-Agent: Oracle HTTPClient Version 10: 00
  Accept: text/plain
  X HTTPAnalyzer-Rules: 1@localhost:8099

  Root cause]] of ServletException.
  java.lang.NoClassDefFoundError: oracle/rdf/kv/customer/jena/OracleNoSqlConnection
  to the store. StoreResourceHandle.queryStoreNoSQL (StoreResourceHandle.java:41)
  to the store. StoreResourceHandle.getStoreQuery (StoreResourceHandle.java:68)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
  Truncated. check the log file full stacktrace
  >
  < 25 may 2014 21: 45 CEST > < opinion > < Diagnostics > < BEA-320068 > < Watch "UncheckedException" in the module "Module-FMWDFW" with severity "Notice" on the server "DefaultServer" triggered on 25 may 2014 21: 45 CEST. Details of the notification:
  WatchRuleType: Journal
  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-101020') OR (MSGID = "WL-101017'") OR (MSGID = "WL-000802'") OR (MSGID = "BEA-101020'") OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))
  WatchData: DATE = may 25, 2014 21: 45 CEST SERVER = DefaultServer MESSAGE = [ServletContext@10446167[app:StoreResource module: StoreResource-store-context-spec: null, path root-version: 3.0], request: [ weblogic.servlet.internal.ServletRequestImpl@1e35577
  GET StoreResource-Store-context-root/resources/store HTTP/1.1
  Connection: TE
  TE: trailers, deflate, gzip, compress
  User-Agent: Oracle HTTPClient Version 10: 00
  Accept: text/plain
  X HTTPAnalyzer-Rules: 1@localhost:8099

  Root cause]] of ServletException.
  java.lang.NoClassDefFoundError: oracle/rdf/kv/customer/jena/OracleNoSqlConnection
  to the store. StoreResourceHandle.queryStoreNoSQL (StoreResourceHandle.java:41)
  to the store. StoreResourceHandle.getStoreQuery (StoreResourceHandle.java:68)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
  at java.lang.reflect.Method.invoke(Method.java:601)
  to com.sun.jersey.spi.container.JavaMethodInvokerFactory$ 1.invoke(JavaMethodInvokerFactory.java:60)
  to com.sun.jersey.server.impl.model.method.dispatch.AbstractResourceMethodDispatchProvider$ TypeOutInvoker._dispatch (AbstractResourceMethodDispatchProvider.java:185)
  at com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:75)
  at com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:302)
  at com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:108)
  at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
  at com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:84)
  at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1511)
  at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1442)
  at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1391)
  at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1381)
  at com.sun.jersey.spi.container.servlet.WebComponent.service(WebComponent.java:416)
  at com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:538)
  at com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:716)
  at weblogic.jaxrs.server.portable.servlet.ServletContainer.service(ServletContainer.java:218)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:844)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:280)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:254)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:341)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.j2ee.ws.server.jaxrs.TenantServletFilter.doFilter(TenantServletFilter.java:81)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:137)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:225)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3367)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3333)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2220)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2146)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2124)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1564)
  to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:254)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)
  Subsystem = HTTP USERID < WLS Kernel > = SEVERITY = error THREAD = ExecuteThread [ASSET]: '1' for the queue: MSGID "(self-adjusting) weblogic.kernel.Default" = BEA - 101017 MACHINE = mustapha TXID = the CONTEXTID = 6a226c0c-6115-47df-833a-8465cd21cc68-0000002f TIMESTAMP = 1401047153802
  WatchAlarmType: AutomaticReset
  WatchAlarmResetPeriod: 30000
  >
  < 25 may 2014 21: 46 CEST > < emergency > < oracle.dfw.incident > < BEA-000000 > < 65 incident created with the key to problem "DFW-99998 [java.lang.NoClassDefFoundError] [oracle.j2ee.ws.server.jaxrs.TenantServletFilter.doFilter] [StoreResource]" >

  Hi MEMU,.

  I have it. And he has deployed in the built-in container. It works very well. Note that I did the following.

  (1) change the project properties,

  In the libraries and Classpath, I need to add in Classpath entries associated Jena libraries, slf4j, sdordfnosqlclient.jar, kvclient.jar etc.

  (2) use the xercesImpl - 2.9.1.jar instead of xercesImpl - 2.10.0.  Jdev 12 c appears to use an older version of xerces as bundles of Jena.

  Once done the configurations above, I can execute your project without changing Java code.

  Here is the result:

  [14: 34:08] wrote the Web application Module for /home/alwu/.jdeveloper/system12.1.2.0.40.66.68/o.j2ee/drs/UniversalSparqlQuery/queryWebApp.war

  [14: 34:09] wrote the Module Enterprise Application to /home/alwu/.jdeveloper/system12.1.2.0.40.66.68/o.j2ee/drs/UniversalSparqlQuery

  [14: 34:09] Application deployment...

  [14: 34:15] Application deployed successfully.

  [14: 34:15] the constriction of context following URLS have been defined and can be used as a starting point for testing your application:

  [14: 34:15] http://192.168.1.1:7101 / UniversalSparqlQuery-application-context-root

  [14: 34:16] for deployment time: 9 seconds

  [14: 34:16]-deployment is complete.  ----

  Run start time: 9573 ms.

  [Application running on IntegratedWebLogicServer UniversalSparqlQuery]

  Target application w- http://localhost:7101/UniversalSparqlQuery-query-context-root/resources/application.wadl

  Target URL - http://127.0.0.1:7101 / UniversalSparqlQuery-query context root/resources/query/select/home/store/port/model/application

  I went in a universal store

  I create the connection to: model

  Run the select query

  I leave the store: store

  I spent in-store universal semep

  I create the connection to: http://Repository

  Run select select? s? p? o where {? s? p? o}

  I leave the store: semep

  It will be useful,

  Zhe Wu

• Basic questions about the PL/SQL web services and data source names

  Hello
  
  I've successfully generated a web service for a procedure from PL/SQL packaged JDeveloper 11.1.1.3.0).
  
  The following code was generated in the base class for web services:
  

   __dataSource = (javax.sql.DataSource) __initCtx.lookup("java:comp/env/jdbc/dbconnectionDS");

  However in the weblogic server, the data source name is jdbc/Gisele for deployment fails in a first time.
  
  What is the recommended procedure to solve this problem? The obvious solution is to manually change the source - that's what I did and it worked fine. However if I re - generate the web service I won't lose my change. Is there a better way to do it?
  
  Another question - in the web.xml file that is generated, there is a resource-ref to the data source. I was hoping that change the data source name it would help, but it didn't work. What is - it used to in this context?
  
  Thank you
  Luis

  I forgot to add, so in case some time later and you want to update the connection to your service details, all you have to do is to add the following entry in your weblogic.xml:
  .
  
  JDBC/ref_name_from_web. XML
  JDBC/new_jndi_name
  
  .
  And in this way, you will not have to change any code level to point your web service to another connection.

  Vishal-

• Just last week, on Internet Explorer and Mozilla, I have problems shows a safe web site and pages.

  Only in the last week Internet Explorer and Mozilla are problems displaying or find some website and web pages. It works perfectly fine on another computer. Here are the pages that I shot to the top of many times and they are secure pages. Companies that have been around for years. For example: when I go to my wordpress.com account and try to go to the dashboard, which is where I make changes on the Web site of my blog, and it will not come to the top. Also my site through wordpress will not come to the top. What is going on?

  Hello

  Try this process.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock rese t in the command prompt, and then press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int ip reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• read Web service and display it in a gridview

  Hi, I am using widgets with plugin .net. I have a wan to make a grid and fill it with the Web service data. A few examples? How can I do?

  Thank you, Oscar

  Here are some of the threads I found by doing a search on the forums for "web service":

  http://supportforums.BlackBerry.com/T5/Web-development/Web-service-parameter/m-p/421999

  http://supportforums.BlackBerry.com/T5/Web-development/using-Web-services-in-widgets/Ta-p/503194

  http://supportforums.BlackBerry.com/T5/Web-development/NET-Web-service-help-in-BlackBerry-widget/m-p...

  http://supportforums.BlackBerry.com/T5/Web-development/SOAP-Web-services-with-BlackBerry-widgets/m-p...

• OfficeJet 7310 all-in-One: activate the Web Services and printing of Tablet

  I can't find a way to enable Web Services on my 7310 all-in-One.  It is connected by wire to my internet router, and I use the built-in print server.  ePrint online information, says this printer is supported.  When I go into the ePrintCenter registration page, or when I go into the app on my Android tablet, it won't give me an option to manually enter the printer and can't find the printer on my home network.  All this suggests that I should update the firmware of the print server, but I can't find a way to do it.  Any help would be welcome.

  Ok. I found my own solution, but the documentation is really bad.

  The answer is: If you select document, it gives you the choice of the printer on the wireless network, even when not compatible eprint. But who knows? I would have thought to implement a printer first.

• Web services and Sessions

  Hello
  
  Is it possible to maintain a session on the server for the duration of a series of web service for an individual consumer requests?
  
  What I want to do, it is something like this:
  1. the consumer to invoke the Web service with a name of user and password combination in the SOAP header.
  2. the web service authenticates the user on the database and inserts a session id in the SOAP header.
  3. the consumer makes another call to the webservice for some data, and if the session id matches the session stored on the server, the web service returns data for this and all subsequent applications that have the id correct session stored in the SOAP header.
  
  Does anyone know if there is any way I can do this or do I must write the data to a database and the text for each call?
  

  The first links of Google when I searched for the service coldfusion web
  cookies.

  http://tjordahl.blogspot.com/2006/06/how-to-set-cookies-in-ColdFusion-SOAP.html
  http://tjordahl.blogspot.com/2006/06/how-to-get-Web-service-response.html