Problems since the introduction of "undisclosed recipients".

I have created an 'Undisclosed Recipients' address to be used when I need it, and they appear in my address book. Unfortunately since then, despite my emails showing that they are my name (according to the normal) as I have their project, versions of sent message show that they are of "Undisclosed Recipients". I have sent test Emails to myself - reception they show that the message is of so many "Undisclosed Recipients". I checked my personal information in the address book - they have not changed, they show my name and my normal Email address. The entrance to Undisclosed Recipients also shows my normal email address. Any help would be greatly appreciated. Meggs

Delete the entry "undisclosed recipients" in your address book. You don't need it. Thunderbird that automatically inserts when you send a message where all addresses are defined as Bcc:

Tags: Thunderbird

Similar Questions

  • Why is the uncompadible again toolbar google with ff5 and his long, since the introduction of ff5 why havnt u fixed it

    Why is the Google toolbar always uncompilable with ff5 and his long, since the introduction of ff5, why do u not have this fixed

    You are welcome.

    Please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

  • Since the introduction of Windows 7 at startup I get the following original error-The 345 could not be located in the dynamiclink Library COMCTL.dll.

    Since the introduction of Windows 7 at startup, I get the following error - gnotify, exe the orginal 345 could not be located in dynamiclink Library COMCTL.dll. It gives me no options I try to get out and it takes several attempts to cancel, then, when it's a small login to my gmail page appears I connection and have no problem more until the next day when I start my computer to start all over again. I also had a horse of course for my pointer I can't find this option in Win 7 selection but I'm really now trying to figure how to set the error thanks all help appreciated

    Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question in the support forum: ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • How can I change the settings of "undisclosed recipients" when send mail.  New to using a Mac.  Thank you

    How can I change the settings of "undisclosed recipients" on my Mac Mini... new to using Mac!  Thank you

    What you mean?

    If you enter a recipient in the BCC line other recipients will not see another. Recipients will see undisclosed recipients.

    Leave the line blank

  • How can I uninstall Firefox as PC has had problems since the Installation

    I installed Firefox on January 7, 2014 and have had problems since with PC windows 7pro. The PC is slow and a few minor problems. I tried to uninstall Firefox several times but without success. The problems may not be because of Firefox but why can't uninstall the program.

    Please notify. Thank you

    Jim cordially

    It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.


    Create a new profile as a test to see if your profile is the source of the problems.

    See "create a profile":

    If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • As many problems since the update of the iPad iOS 9.3.  Grrrrrr!

    Since the update last night, here is the list of issues, I can't seem to fix OR find answers to solve:

    1. cannot connect to iCloud.

    I have already reset my network WiFi settings, did a restart of the force and also changed my password on  Nothing works.

    Whenever I put my password, it keeps "check failed: there was an error connecting to the apple ID server.

    2. continue to try to get into "iTunes and App Store, my iPad, but the whenever I do, the iPad hangs and I have to do a restart of the force.

    3 - unable to restore iPad from iTunes because I can't iCloud to work so I can't disable "Find my iPad" to do a restore

    4 - my whole iPad slowed to a bloody crawl and I constantly reboot of the force. »

    What the DEVIL's going on with this update and my iPad?

    Unfortunately this is a royal mess and you are part of a large number of serious problems. Take a look under settings > general > topic > Version and please tell us which version downloaded. We may be able to offer suggestions based on what you have.

    Also, please take a look at this summary by a very experienced user.

    For those having issues with the iOS 9.3 update please read...

  • Problems since the 6/18 Portfolio Manager

    I presented several reports of incidents at

    The incidents that added Transaction errors that said a symbol was invalid (even though it came in find symbol); partial data in MY portfolio lines; quotes never updated after the opening of my Portfolio.

    They responded to an e-mail saying Microsoft was aware of problems:

    Hello dear customer, please contact support online money Services.  I understand that the portfolio is not updated as expected.  Please accept our sincere apologies to this topic. Our silver team is aware of this problem and work on the resolution as soon as possible. Please bear with us. Thank you for your patience and we appreciate your continued support and strive to provide you with the best available quality service. Best regards, Kishore, support Services online money.

    Incidents were then closed without assistance.

    It has been more than a week, since the problems started with this enhanced version of Portfolio Manager.

    When will they be resolved?

    Can go back you to the working version of Portfolio Manager?

    Will you stop closure of incident reports until the problems are resolved?

    Try this forum

    Discontinued Microsoft all services and online assisted support for all versions of money January 31, 2011. (More dirty money on June 20, 2009 Microsoft.) If you are looking for an alternative program, Microsoft has made versions of Money Plus sunset available in replacement of the following expired programs: Microsoft Money Essentials, Microsoft Money Deluxe, Microsoft Money Premium, Microsoft Money Home and Business of Money.

    Perhaps Portfolio Manager be directed to the Forums of money.  These are discussions on the Portfolio Manager

    At they close the Support Ticket or wait for a response?  It sometimes takes weeks before sending a response.

  • Computer problems since the installation of Microsoft Security Essentials

    Since the installation of Microsoft Security Essentials, my computer will stay only in mode "sleep" for a minute or two and then turns back on. Also when I turned off the computer, Microsoft Security Essentials also stops, and I have to turn it back on when I start the computer. I had the two trend micro PC-cillan and Macafee security on this computer. But I uninstalled them before installing Microsoft Security Essentials.Also my computer is supposed to go to mode after half an hour of not used but he is staying on.


    You should never have 2 AVs installed at the same time

    you say you had trend and McAfee all both installed

    only, cause you system problems that

    Make sure that the trend and mcafee have beeen completely removed using their removal tools

    McAfee removal Tool

    Trend removal tool

    For more MSE questions please repost the link below in the MSE forums

  • Wireless connection - problems since the installation of our BT package

    Since the evolution of our package BT last year, we have been unable to connect to one of our computers with a Windows operating system on a wireless basis. We have transformed a machine to the Linux operating system and that connects to each time. The old Center has been postponed, but did not make a difference. BT feel is the environment, however why the OS linux connect wirelessly. Can be a help for this?

    Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:

    Here is an article on troubleshooting network connections wireless (with links):

    Here's a long guide on wireless internet connections in Vista:

    Here is an article on how to set up wireless internet in Vista:

    You must set up a wireless internet connection in the network as well as the connection sharing normal LAN wireless and connect to it as well as the local connection.  If you don't do this, you will not have an internet connection.  You need both.  You must also enable some features in the main area sharing network to access the internet - they are quite well defined.

    I hope this helps.

    Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Problems since the update to Dreamweaver

    I am a student and one of my classes this term is to learn Dreamweaver.  I had taken the CC 2014 version and earlier this week, I did an update on Dreamweaver and other Adobe products.  Since the update, I noticed that I have more Design button above the screen.  I have only code, split and live view buttons.  Then my homework begins by creating a new site using the files given to us.  After you have created the new site I had to create a new html file I made.  With this new html file open, I needed to go down to the pane properties and click the Page Properties button.  However, this is not this button.  When I went into the menu change, the properties of the Page is grayed out so I can't select it.  Does anyone have an idea on what I can do to solve these problems?

    OK, I found the design mode, did not realize that there is now a drop-down arrow next to live that I had to click on and have a menu to select either directly or design

  • WiFi problem since the last update

    Since the last update wi - fi does not and the conflict with the router and any other device has stopped working


    Follow the steps here:

    If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

    To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

  • printer problems since the update to El Capitan

    Since the update to El Capitan, my printer does not print.  I have a Pixma MX432.  Any ideas on what I should do?

    Have you updated your driver t-multifunction/mx-series-jet of ink/mx432

  • Problems since the last update of cc

    All the morning

    Bit of a difficult to describe but here goes...

    Since the last patch (CC2015.0.0) running on Mac OSX 10.9.5 - when I open an image, it seems to stay in the upper left corner and a black bar at the bottom of the window - I discovered that if I push the column where the history, Actions, brushes, etc. are the image jumps toward the Center, but remains of the black bar at the bottom.

    Hope that makes sense, any help much appreciated


    Not turning off"use graphics processor" in the Performance preference and restarting Photoshop have a bearing on the issue.

    And is the setting for the Application on?

  • Windows Sidebar problems since the installation of Vista Service Pack 2

    I installed Vista Service Pack 2 today. After the installation of the windows sidebar has stopped working. For example the actions of Gadget, Gadget of the currency, in fact all of the gadgets that require a live stream display the message "Service unavailable". Some gadgets loading is no longer at the side bar, double click on, for example Weatherbug & multimeter (D).  I tried a system restore, but the problem remains, so I did an extra restore to indeed to reinstall Vista Service Pack. I also reset the router and Modem

    I tried to remove the gadgets from the sidebar and load it again but the problem still remains.  So I decided to download gadgets again on the Microsoft site but when I click on the link in the window "Get more Gadgets online" link does not work. This problem is only since installing Vista Service Pack 2 any what help you can give me to eliminate these problems would be most appreciated


    Have you checked your firewall to see if the file sidebar.exe is allowed?  When you have downloaded the update it probably resets the security settings for this program if your firewall blocks most likely it.  First try.

    Have you double checked the control panel for the side bar to ensure that it was activated?  Again, the setting could have been modified by the service pack.
    Try this, it includes a section "fix it for me":

    Let us know if it helps or if you need further assistance.
    Thank you

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • T61, Vista Business with Cisco VPN problem since the last update on the Lenovo site.


    I use a T61, Vista Business, Cisco VPN Client v.  Since my last update, October 2, 2008 on the Lenovo ThinkVantage Productivity Center site, I can't connect to my VPN Office. It was working perfectly before this software update. The only thing I remember is the update of the driver for Intel 4965AGN card v.12.x. I went to v.11.5 but it's not better.

    When I try to connect, I get the message "secure VPN connection terminated by a peer. "433 reason: (reason unspecified peer). I did a test with 'ping' IP address of the VPN and the response of the address.

    Usually, when the VPN Client is able to make the connection in the network connection window, I see "connection to the network space 2 (the Cisco VPN system map)" enabling / disabling Disable to activate the State. But there in my case, turn it off.

    I can connect with another PC using Windows XP. Thus, the VPN works.

    Any ideas?

    Thank you

    I met a very similar problem with my X61s. I was able to fix this by removing the print reading software for which an update was also installed on 2 Oct. As I barely use the fingerprint reader, it wasn't a problem for me. The Cisco VPN worked never better...

Maybe you are looking for