Problems switching from Palm to Outlook Dekstop

Similar Questions

• change from Palm to Outlook

  Currently, I synchronize with Palm desktop (latest version) using a Centro.

  Can I change to synchronize with Outlook (2003) instead?

  Hello!

  Of course, you can change the method of synchronization to Outlook and it should be as simple as on the PC using your Start menu:

  Click on start-> all programs / programs-> Palm-> PIM led Sync folder-> select synchronization with Outlook.

  Alto!  Outlook will your next hotsync.

• Transfer blackBerry Smartphones from Palm to Blackberry via the switch device Wizard

  I am trying to use the device switch Wizard to transfer the data from my Palm Desktop on my Blackberry Desktop (my current Palm device is the Centro, and all data are saved on the desktop).  When I get to the window "select Desktop Organizer', both ' Palm/Treo or Palm Desktop software' and 'Software Windows Mobile for devices such as a Smartphone or a Pocket PC' options grayed out and neither to be selected.  Any advice on how to skip this step?

  For some reason it should not be recognizing the Palm Desktop software.

  Once in front, I had to export all data from Palm to Cs4l or XLS file (I forget which) and then import all on my Outlook and then sync Outlook to the BlackBerry.

  I found this...

  http://www.BlackBerry.com/BTSC/KB10722

• How to export my calendar from Palm Zire22 in Outlook?

  I have a Zire22 and would love to export my palm to outlook calendar so that I can use the Palm calendar. I try to export and it registers only as a dba and cannot get it more. Any who, has some ideas. I have the VER Hot sync 6.2

  The article says the utility is called Palm2csv, that I found here using Google.

• Migrating from Palm TX to Palm T5

  I use a Palm TX for quite a few years.  Its screen was slowly losing the touch sensitivity, so I replaced the screen.   The replacement screen was a little better and went even faster in the downhill.

  I bought a Palm T5 thought that I could copy the data off my TX on the T5. I didn't know that they synch with different versions of the desktop (6.2.2 for TX) and 4.1.4e for T5 that store data differently.  I was able to export/import notes service, but when I tried to do the same thing with lists of calendars, tasks and contacts, I ran into all kinds of problems ranging from 6.2.2 refusing to read the (calendar) data or import incomplete data (Contacts).

  I tried to synchronize with Outlook 2000 to transfer data, but with only partial success.  I tried several variations and will not try to transmit the results here.  Part of difficulty is the constant need to reload 4.1.4e or 6.2.2 to synchronize with one or the other Palm.  I don't seem to be able to load the two charges on the same computer.

  I need to start over and I'm looking for some advice on how to proceed.

  Thank you

  Bob

  Yes, you must install the update 1.1 of the Palm support downloads. I don't know if any unit T5 actually shipped with it pre-installed.
  
  On the question of if your device needs her:
  
  1 create a new note.
  2. write a cursive lower case 'L' followed a point, followed by the number 9
  3. This will result in a date that will read '2005-06-03 13:38 ' if the 1.1 update is installed. If the date is earlier, install the upgrade.

• Palm TX: Outlook via Microsoft Exchange synchronization, but no data is transferred

  Dear Group

  I'm not a beginner. I am very computer and hardware gadget and intuitive software. My PalmTX syncs, but there is no data transferred. Previously, Sync worked well on Outlook 2003, 2007 and 2013. However, I started having problems with the transfer of data after synchronization when I lowered the score of 2013 Office to Office 2010. I've demoted office 2013 because it was a big eater of resources on my computer. I stripped all the reminants of office 2013 (including the reminants registry) before you install Office 2010 to ensure that there is no possibility of confusion for the Palm TX. I tried freezing and reinstall several times. Note, every time that I run this process, I uninstalled the software/files Outlook and Palm/all software including any reminants of registry. When I reinstalled, I started with the Outlook2007 then the PalmDeskTopSetup6.2.2, then the PalmConduit2007. Also, I tried several new synchro and cleaned/disable-dusted cables connectors for synchronization on the Palm TX itself... with no success.

  I think the problem is that the conduit itself is not be trained. In Hotsync when I click Configure > change hotsync action > settings, I get an error message stating "Microsoft Outlook Conduit - an unknown error has occurred." Previously, this setting function would have text that would allow me to change how the conduit receives data (e.g. MS Exchange;) IMAP) I remember correctly - not 100% sure. If my suspicions are correct, one of the following values is corrupt: PalmDeskTopSetup6.2.2, PalmConduit2007 or MS Exchange. Given that I don't have a "fresh" copies of PalmDeskTopSetup6.2.2 and PalmConduit2007 because HP links no longer work, I ran a repair on my file of MS Exchange. It still has not fixed the problem. Note that whenever I have to uninstall/reinstall Outlook, I delete the MS Exchange and files all connected, as it recreates it from scratch when Outlook is reinstalled again. To be clear, does not preclude MS Exchange as the culprit because Microsoft adds a fix or security to every time something else change always 'breaks' :-).  I'm not sure what to do next. If anyone has had this problem or have any suggestions on what I could do to fix this? I really really need my at least my calendar of transferred to my Palm TX. Help, please. Thank you.

  My computer and the Palm TX is the following configuration:

  * Win7 x 64

  * In the course of running Outlook 2007 (downgraded from 2010 to 2013 because MS Office Products are resource hogs on my computer)

  * Email Sources: MS Exchange (work) and local ISP (home - email IMAP) - both accounts are running simultaneously

  * Synchronize via USB

  * Driver: Akeeba to Win x 64

  * Software installation of operating system Palm: HP - PalmDeskTop6.2.2 (contains HotSync Manager 7.0.2); HP PalmOutlook2007Condiut

  * Message from the outlook journal file:

  -Successfully synchronized outlook calendar

  • Duration: 1.1 seconds
  • Outlook calendar
  • OLERR: 0C-000F (0X8000FFFF)
  • OLERR: 0D-0003
  • OLERR: 0D-0001
  • Not synchronized

  Dear Group

  I solved my problem. I wanted to share with you the solution for those of you who maybe had a similar problem AND you have tried all the suggestions that have been posted since the Palm OS/WinMo Forum without success. My problem is that something that she prevented the pipeline connecting my Palm Outlook of training courses. The result was that my Palm computer / would synchronize but no data (entered calendar, tasks, etc.) won't be transferred. Before we get to what has worked for me, run through the following options before trying my fix:

  1. BACK UP YOUR FILES! BACK UP YOUR FILES! BACK UP YOUR FILES!
  2. Repair your outlook (pst or ost) files - microsoft has detailed instructions on how to do this with your version of Microsoft outlook. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  3. Delete your current outlook profile and create a new profile - microsoft has detailed instructions on how to do this with your version of Microsoft outlook. Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  4. Completely uninstall outlook, which will include the deletion of the relevant registry entries and system files. I HIGHLY recommend that you DO NOT attempt to do it "manually" yourself unless you experience such changes on your computer. Incorrect changes to your registry files or computer system will completely shut down your computer and ultimately to lose all your data because of the methods that will be needed to fix your mistake. The good news for those of you who have no expertise in this area is that Microsoft has made a DIFFICULTY IT PATCH REMOVAL TOOL that will automatically run a complete unstall of outlook or office.  -microsoft has detailed instructions on how to do this with your version of Microsoft outlook. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  5. To ensure that your data are fully INDEXED. In your control panel, there must be a parameter called OPTIONS of INDEXING. If Indexing is not complete, follow instructions from Microsoft for your version of Windows to allow for the completion of indexing. Note that this will take time. You can do this night. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful... Uninstall the components of Palm. Return to the OPTIONS of INDEXING and completely Strip and rebuild your index from scratch by pressing the Refresh button in your version of Windows. Note that this will take time, again you can do this night or weekend depending on how much stuff you have on your computer. When finished, reinstall the components of Palm, synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  6. Finally, what worked for me was creating a new WINDOWS PROFILE. I discovered thanks to make another system and software checks that I did not mention here that my WINDOWS PROFILE was damaged and it was what was causing the failure of training leads between my outlook and palm. How do you create a new windows profile will be different depending on your Version of the Windows operating system.  -microsoft has detailed instructions on how to do this with your version of Windows. Uninstall and then reinstall outlook. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm.

  Good luck

  Concerning

• Cannot send pictures from iPhoto using Outlook. Messages pass through but no images.

  I read the Apple help page referenced in other queries, but it did not help me. When I try to send a photo from iPhoto using Outlook (my default mail program associated with a Gmail account), the message goes through but not the picture. I checked the emails contained in iPhoto preferences and Outlook and iCloud are there, but doesn't seem to work I have to drag the photos on the desktop and then attach them to an email in Outlook, but I think the image quality suffers.

  Has anyone else had a problem with Outlook? Is it simply not possible to use the two together?

  Thanks in advance for your suggestions.

  What version of iPhoto? and the operating system?

  Exactly how you share to Outlook?

• I think switching from Windows XP to Windows 7, but it seems complicated. Is this a good idea?

  I want to get rid of my security Computer Associates software. It overload my system.

  I believe that a combination of Windows 7 and Microsoft Security Essentials and Web of Trust would do a good job.

  Switching from XP to Windows 7 seems complicated. Is this a good idea?

  I would appreciate any advice. I am a former novice

  Thank you

  Get rid of CA security software and do general maintenance on your system would probably go a long way to improve your computing experience.  See help! My computer is slow!

  Unless you plan to buy a new computer with Windows 7 pre-installed, make sure that your hardware is compatible with Windows 7 (for the most part, this means that Windows 7 drivers are available; problems are more likely to occur with older laptops).  Download and run the Windows 7 Upgrade Advisor.

• How to switch from windows 7 to windows 8 without a product key.

  How to switch from windows 7 to windows 8 without any product key

  Hello

  Sorry, you have problems with the upgrade to Windows 8 or want you that Windows 8 free? You can't get Windows 8 free. If you try to install Windows 8 via disk then please see this page:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-windows_install/download-a-bootable-Windows-81-disc/17207153-902f-4b94-bf95-85ab70ca7064

  If your current Windows 7 PC is readable for 10 Windows PC; You can upgrade your PC for free, no hidden prices and this is a full version.

  If your version of Windows 7 Starter, Home Basic or Home Premium then your PC is promoted to 10 Windows Home.

  If your version of Windows 7 Professional or ultimate edition, so your PC is upgraded to Windows Pro 10.

  If you have any more concerns with the upgrade, see

  http://www.Microsoft.com/en-us/Windows/features

  Hope that the information was useful. If you need help more, feel free to contact me or anyone!

  RT

• Can I switch from Windows XP to Windows 8?

  Original title: upgrade

  Currently, I am working on the XP platform; However, it gave me a CD of Windows 8, as a B - Day present. Can I switch from XP to 8? and if so, what are some of the problems I can expect to encounter, as appropriate?

  Your Windows XP installation qualifies for the Windows 8 upgrade, but you will not be able to make a direct upgrade from Windows XP to Windows 8. You will need to reinstall your programs and drivers.

  See the following for instructions:

  How to upgrade Windows XP to Windows 8

• Problem of his Palm t5 (research)

  Hello!

  Two days ago my t5 palm stopped play sounds via the internal speaker (his helmet seems to be ok). Posts on this forum say that it is a hardware problem (micro-switch is stuck in a headphone jack). At least in my case, I need a more complex explanation:

  -The internal speaker stopped working without any interference in the headphones (I do not plug headphones into the Palm). Most people have this problem after disconnecting the headset.

  -J' was able to set my speakers to life by simply plugging in the AC adapter / CC. President Ping with a usual sound and worked for a few hours, that dies again.

  -At least twice, I could hear sounds after a hard reset. But only until I tried to launch any application. Then he was silent again.

  -As for now, I hear 'clicks' of the speaker when I connect my T5 to hotsync cable and press the hotsync button. Still more - if I have press the hotsync button while the cable is not plugged into the USB port - and wait 30 to 40 seconds, I see a box with the message "hotsync failure" alarm and can hear the sound of the mono speaker alarm Palm. So it is again being mute.

  With a background in electronics, I opened the unit and checked the sound elements visible:

  -L' speaker is OK, the measured resistance is recommended on the speaker (7.8 vs 8.0 ohm)

  -Points of motherboard are OK

  -There is a voltage V 1.68 on the two points vs. the ground, but no difference in voltage between the pads.

  -5-pin headset plug seems to be OK. Microswitch pads (two pads on a basis of a Jack) have no resistance measured when the socket is empty and are disconnected when headphones are plugged in.

  -J' have tried to short-circuit buffers with external cable - but no effect dip switch - sound is always redirected to the helmet.

  -J' tried to connect the internal speaker to the headphone channel. It works, but the rate of release of palm is unacceptable (headphones are devices to 30 ohms, and I believe that internal speaker is connected through some elements of energy saving).

  I'm completely perplexed with my problem of his palm. This may not be a pure hardware problem as he plays sometimes a few sounds via mono speaker. But if this is a problem in a software - how in hell, he survives device resets?

  Any ideas?

  Hello!

  Indeed, the problem was multiple connector. It seems that cable flat keyboard connection and connector multiple base with a main card had isolation deteriorated between some of his sons and a surface of steel on the base. Now, I remember that some time ago my Palm was irregularly to hot-sync mode even when the hot sync cable was not plugged.

  After that I put a piece of insulation between the metal base and a flat cable (which covers the hard edge of the base metal) mono speaker returned to life. Please put this in a FAQ or KB if possible.

  It would be nice for palm-engineers (if palm still has some) to build a utility program that allows the user to select the device audio default substitution of the system. See cool head for treo on sourceforge (does not work on palm t-series).

  Thank you!

  Message relates to: Tungsten T5

• Error HTTP 500 HOL - vSphere Distributed Switch from A to Z-

  It seems that there are problems with the "vSphere Distributed Switch from A to Z" HOL.  I get the following error message when you try to access the laboratory (see screen capture below).  Other labs are working fine for me.  I tried to access this laboratory of 5 different computers with the same results.

  There was a communication error with the server. Try again in: 26

  Message: HTTP 500 Code

  

  Any help would be appreciated.

  Try the testdrive tenant.

  He seemed to do a pod stuck in the queue of our deployment for the testdrive tenant. That may have caused this problem.

  -Doug

• CC of Dreamweaver crashes when switching from mode code in design mode

  I am a recent problem with a file that I am currently working. When I switch from code in the Dreamweaver design view crashes and requires a stop down. Other files seem to work without problem. That particular file has 3 files EdgeAnimation CC cascading which are selected by questions from the media. I can test the page online, but not in design or mode live view.

  As your new page did not plant, which leads me to believe that you have critical errors or conflicts in your other pages.

  Try to run your code through the W3C validation tools.

  • CSS - http://jigsaw.w3.org/css-validator/
  • HTML - http://validator.w3.org/

  Also debug JavaScript.

  JavaScript - http://www.jslint.com/

  Nancy O.

• Cs6 Dreamweaver crashes when switching from design to live view

  Cs6 Dreamweaver crashes when switching from design to live view

  I'll try later, but I think I may have found the problem. It seems that the cs6 dreamweaver made two files confquration on the same day, but only about 4 hours out. This does not seem normal to me.  Does anyone know why an expensive program like this would do that? Was it a mistake of the operator? I asked the woman who runs this program and she doesn't know anything about the configuration files. Here's what show folders > C:\Users\cyn\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\confiquration, configuration-1

  Post edited by: justbobm202

  Can I please have an answer to the question first, config please

  Post edited by: justbobm202

• Switch from a simple Xml call to an rpc-Http call...

  Hello

  I need to go through a simple call from Xml:

  <mx:XML id="urlsGeneral" source="http://www.mySite.com//.../AFS.xml"/>
  

  for an rpc-Http call which updates the display if Xml is changed at any time.

  I forgot to mention the most important and yet very simple point: I need it only to display in a title, etc. and NOT a datagrid or good example below.

  title = "{urlsGeneral.urlGeneral. (()_@name==0).age}

  I tried a lot today, but just can't get it right like id = "urlsGeneral" is always the problem.

  Any help would be appreciated! Thanks in advance. cordially aktell2007

  < urlsGeneral >

  < urlGeneral >

  < name > Jim < / name >

  < 32 > < / age >

  < / urlGeneral >

  < urlGeneral >

  < name > Jim < / name >

  < 32 > < / age >

  < / urlGeneral >

  < / urlsGeneral >

  Another call:

  	< mx:Script >
  		<! [CDATA]
  			Import mx.collections.ArrayCollection;
  			Import mx.rpc.events.ResultEvent;
  			public var myData:ArrayCollection;
  			protected function myHttpService_resultHandler(event:ResultEvent):void {}
  				myData = event.result.urlsGeneral.urlGeneral;
  			}
  		[]] >
  	< / mx:Script >

  	< mx:HTTPService
  		ID = "myHttpService".
  		url = » http://www.mysite.com//.../AFS.XML "
  		result = "myHttpService_resultHandler (Event)" / >

  Best I wanted something like this works:

  	< mx:Script >
  		<! [CDATA]
  			Import mx.rpc.events.FaultEvent;
  			Import mx.managers.CursorManager;
  			Import mx.controls.Alert;

  
  
  
  
  
  
  Import mx.rpc.events.ResultEvent;
  
  
  Import mx.rpc.xml.SimpleXMLDecoder;
  
  
  
  
  
  
  Do not here it is already used in .swc!
  
  
  / * import mx.rpc.http.HTTPService; */
  
  
  
  
  
  
  private var myHTTP:HTTPService;
  
  
  
  
  
  
  private function initConfigCall (): void {}
  
  
  
  
  
  
  
  
  myHTTP = new HTTPService();
  
  
  
  
  
  
  
  
  myHTTP.url = "com/assets/data/changesAppAIRPIOne001.xml";
  
  
  
  
  
  
  
  
  myHTTP.send ();
  
  
  
  myHTTP.resultFormat = "xml";
  
  
  
  myHTTP.addEventListener (ResultEvent.RESULT, resultHandler);
  
  
  
  myHTTP.addEventListener (FaultEvent.FAULT, faultHandler);
  
  
  
  
  
  
  
  
  CursorManager.setBusyCursor ();
  
  
  
  }
  
  
  
  
  
  
  private void resultHandler(evt:ResultEvent):void {}
  
  
  
  
  
  
  
  
  var xmlStr:String = evt.result.toString ();
  
  
  
  var xmlDoc:XMLDocument = new XMLDocument (xmlStr);
  
  
  
  var decoder: SimpleXMLDecoder = new SimpleXMLDecoder (true);
  
  
  
  var resultObj:Object = decoder.decodeXML (xmlDoc);
  
  
  
  
  
  
  
  
  Removed [0] on single node!
  
  
  
  appUpdateAvl.text = resultObj.application.configApp.appNewUpDate;
  
  
  
  appLastChanged.text = resultObj.application.configApp.appLastChanged;
  
  
  
  appChangedSections.text = resultObj.application.configApp.appChangedSections;
  
  
  
  
  
  
  
  
  CursorManager.removeBusyCursor ();
  
  
  
  
  
  
  
  
  myHTTP.disconnect ();
  
  
  }
  
  
  private void faultHandler (event:mx.rpc.events.FaultEvent): void {}
  
  
  
  
  
  
  
  
  var faultInfo:String = "details of the fault:"+ event.fault.faultDetail+"\n\n"; "
  
  
  
  "faultInfo += ' Fault faultString: '+ event.fault.faultString+"\n\n;
  
  
  
  mx.controls.Alert.show (faultInfo, "lack of information");
  
  
  
  
  
  
  
  
  var eventInfo:String = "event target:"+ event.target+"\n\n"; "
  
  
  
  ' type of event eventInfo += ":"+ event.type+"\n\n;
  
  
  
  mx.controls.Alert.show (eventInfo, "Event information");
  
  
  
  
  
  
  
  
  CursorManager.removeBusyCursor ();
  
  
  
  
  
  
  
  
  myHTTP.disconnect ();
  
  
  }
  
  []] >
  < / mx:Script >

  Hi again,

  These days there are more questions than answers on a forum, and very rarely someone sharing the answer if they luck out so here is my answer to the above question is

  Switch from a simple Xml call to an rpc-Http call...

  I got it all along as a commend noted: / / deleted [0] single knot!

  Then, instead of title = "{urlsGeneral.urlGeneral. (()_@name==0).age} it would be now title = "{resultObj. }" {urlsGeneral.urlGeneral. [0] .age} and now it works perfectly well. I hope one or the other of you can use the code and the answer! best regards aktell2007