problems to manage certain features of 5.0 language - enums and annotations - a custom doclet

Similar Questions

• HP Laserjet Pro M201dw: "then I explained the problem to management and they said not to buy all the HP printers more."

  Our two new printers Laserjet Pro M201dw are not recognized on the office network.   I have spent hours trying to understand this and posted questions on the forum Support HP, but without response. They became more disadvantages than thay are worth.  And that's enough.  Then I explained the problem to management and they said 'don't buy it not all HP printers more.'

  Thanks for the suggestions.

  I tried to BootP and disable ipv6 on a printer and at first, it worked (finally).  But then, after having unplugged and restarted, he returned to the ip address of connection no.

  So finally, I noticed and changed the setting of the link of "Automatic" to '100TX' speed full - and that seems to have solved the problem of intermittency.  I've converted and turn it back on, unplugged, etc., and it maintains the connection and ip address.

  Do not want to play with something that works, I can't say with certainty if the speed of one link would have solved the problem (probably not), but it seems that while your excellent suggestions finally established a network connection, the setting of explicit link speed was necessary to maintain the connection.

  Thanks for your help in this matter!

• Turn on the WiFi problem - Atheros AR5007EG Wireless feature will be not - light Windows 7 RC 6.1 - found problem: wireless capability is turned off. Cannot connect wireless with

  I'm not much on COMPUTER stuff so please help - that is the problem...

  Turned on my computer today and cound not connect to internet. The card WiFi AR5007EG says this isn't tour.
  Toshiba L335D - 7820 labtop does not have a switch to turn it ON or OFF, the laptop using fn + F8, but won't do anything.
  Driver details: 8.0.0.225 Windows Device Manager says: this device does not work correctly. I uninstalled the driver,
  Downloaded the newest and re-installed and restarted the computer 5 times.  It is a: Microsoft Virtual WiFi Miniport Adapter #3 that shows that I don't remember being there.  I disabled it and retarted the computer, but no luck.  Finally, when I look at the network connection, the wireless card is showing all the bars in green, but with a big red X.  And Yes, I made sure the network is working correctly.

  Hello

  Atheros AR5007EG wireless card is not on the compatibility list.

  Check with the manufacturer if it is compatible with Windows7.

  You can also check here

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  And you better get to Windows7 RC version.

• Lightroom CC wants me to register. but it's impossible. I pay every month for my membership, but he always wants me to the license. I'm certain features (dust) in lightroom because it isn't licendsed. What can I do?

  Hello, Ive got leightroom cc and an OBA. But now lightroom wants to register the product. I press all the buttons, but it used to register. Now, I'm not certain features (such as dust), and I don't know wht to do. can you help me?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Mozilla firefox add-ons Manager page is not in the correct format and error in installing addons?

  page of the Add-ons Manager makes its appearance in the basic format and when I search for add ons, it shows the result, but without images (to the basic format). Cannot install them too.

  If you can, take a snapshot and post it here for us to see.
  
  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• Download Manager: is is possible to cancel a download and not delete the partially downloaded file?

  There seems to be no way to change the default behavior for the Cancel button the Download Manager.

  I would like to be able to break a download link without losing what I have downloaded so far.

  At the moment to achieve, I stop the download, move the files, and then cancel the download. It of messy and got to make mistakes in the past.

  Thanks for your suggestions.

  You have changed the investigation once more.

  • "If you state categorically that Firefox will remove always download files when you press the Cancel button, I will mark this topic resolved."

  That seems unlikely,
  and in a certain extent depend on system set-up, and for example if you download to a temporary directory, regardless of what Firefox does or not doing the files will be probably deleted a date closer.

  The above is another question, but again, you have asked initially

  • "I would like to be able to break a download link without losing what I have downloaded so far."

  Sometimes, it is possible.

• I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image.

  Original title: HELP! Problem 'open with '.

  I also have a problem of 'Open with', that has happened before. I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image. Even the new emails are now coming this way. How can I get rid of this or the reverse?

  Hi Patti Gunderlock,

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

   

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

   

  Method 2: If the method above is not enough, then you can follow the steps described in the article and check.

   

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Let us know if that helps.

• How to solve the problem up the msg "floppy seek failure" at the start and have to press F1 to continue?

  I get the message: "diskette seek failure" on start-up and must by pressing F1 to continue.

  I took actions

  1. I replaced my dvd/cd drive since was noisy and not reading. (I thought I had a HW problem with the drive because it was a bit noisy etc - maybe not the problem because I always get the message)

  2.i press F2 and changed my BIOS so that my hard drive and CD/DVD are the only elements used in the start menu to the top and deleted the other ports using record to remove from the boot sequence.

  3. using the Device Manager I have disabled the floppy drive A and uninstalled the SW, but whenever I restart Windows it says that it detects new HW and re - install the floppy drive on A.  I don't have a floppy drive on my computer!   I don't think that I had a drive on my control panel before this problem.

  Talked to Dell but my warranty is void

  Help

  rhs_44

  Hi rhs_44,

  ·          What is the model number of the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps suggested by Dell and check if this may help: http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&docid=52030&doclang=en&l=en&s=gen&cs

  In addition, you can post your request in the Dell forum for more press the same: http://www.dellcommunity.com/supportforums

• Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

  SYSTEM & HARDWARE INFO:
   
  Wireless adapter: USB54GC v3
  Router: Netgear WNR834B (with latest firmware)
  Router config: Auto Channel, up to 130mbps mode, radio enabled, enabled SSID broadcast
  Router Config2: Frag Ahmed - 2346, beat the CTS/RTS - 234, long preamble, MTU - 1500
  Wireless security: WPA - PSK + WPA2 - PSK
  Internet: ISP Modem, Auto-IP, DNS Auto, no connection cable

  Operating system: Windows XP Pro SP3 (latest updates as of 17/01/2010)
  Drivers: Latest from Linksys site (v4.9.90 setup.exe download)
  Programs of security software: Comodo & Panda Cloud Antivirus Firewall
  Configs of security software: uninstalled, installed or disabled, and installed/enabled

  DETAILS OF THE PROBLEMS:

  No wireless network is detected on the computer with the installed adapter WUSB54GC.  Cell phones, printer (located in the same office) and game console, receive positive signals / have no connectivity problem.  With a new installation of Windows (i.e. the BONES cost installation before using each method) I tried to install the unit using the following methods: 1) using the Setup program on the CD-ROM included, 2) using the last program (drivers) site Web of Linksys, install 3) manually through the device with drivers from the Disk Manager and installing 4) manually through the Device Manager with the newer drivers from the Web site Linksys.  In addition, I tried with the firewall disabled/uninstalled software.

  I had some success using the Linksys Wireless Manager program that is included in the installation program.  However, it is only if I choose the option 'connect to the hidden network' when the Wireless Manager is ran in the last step of the Installer (no network is detected the case).  The quirks are that the network is not hidden, and after Setup is complete, I can see all the wireless LANs with the Linksys Wireless Manager (no need to check the option hidden network).  After a few diagnostic tests, I think that the Network Magic software that is installed in quiet mode with the Linksys software is at the origin of the problem.

  During the detailed above method that allowed me to connect to the network, I used the firewall software to observe that connectivity can be established only if nmsrvc.exe, a component of the network Network Magic/pure software platform that is installed silently, is allowed access to the network.  After this program to access the Linksys Wireless Manager network can detect networks normally and connectivity problems disappeared.  After he logged initially I can even kill the process, its assistance process and the program manager wireless, still maintain connectivity.  I also thought about this magic (AKA pure networks platform service) network installation two other network protocols that when disabled preventing connectivity.  With certainty the adapter only works if I finish the complete installation program by using the hidden network option and continue to use linksys wireless/network magic software later.

  I'm trying to understand why the Network Magic software is necessary to detect and use all networks.  As I said originally, I tried just to install the drivers through the device without success Manager.  The adapter is configured on a machine Pentium 4 of 2001, and this software supports 40 MB of precious CPU cycles and memory.  I want to connect to my wireless network and use the computer without software bloated slow down the computer even more.  My own conclusion, after all these tests are that my router needs the network magic to work properly for some reason, but if that's true, I would at least use Windows connects to the network as Linksys Wireless Manager uses 30MB RAM itself.  Of course, it's more a problem advanced if I appreciate anyone who takes the time to read all this and make their contribution.  Thank you.

  I think that the most appropriate statement would be that the WUSB54GC has some compatibility issues with Windows XP SP3.

  Specifying the age of the available Linksys drivers I did some research and discovered that the WUSB54GCv3 uses a third party (a common practice), the Ralink RT2800UD chipset.  Latest Ralink drivers for this chipset are over a year newer than the official drivers from Linksys.  They require just a few reconfiguration so that they work with Linksys WUSB54GCv3.  With the updated drivers comes better compatibility and performance often.

  Once I installed these drivers updated the device could detect local wireless normally, and I was able to use the Zero Windows wireless utility to connect to my network.  I think that others with similar compatibility problems will have the same result.  For more information and links to these pilots updated already visit reconfigured: http://sites.google.com/site/linksysupdateddrivers/.  There are not official, updated drivers for many other Linksys products here.  Credit for the drivers and the Web site goes to this person: http://sites.google.com/site/linksysupdateddrivers/about.

• I need manage the bandwidth used, PowerConnect 6224 traffic collision and packet traffic.

  I need manage the bandwidth used, PowerConnect 6224 traffic collision and packet traffic. I downloaded the MIB from the Dell support site and I saw thar there are about 105 MIB in the downloaded file. My question is: in what Mib, I can find the OID which allow me to monitor the above?

  Thanks in advance

  Rogerio

  Unfortunately, there is not a complete list of the different OID in different MIB. In order to find this info to simply browse through the different MIB seeking the OID, you need. We did some looking through the MIB and found these OIDs that can help you. Another thing to keep in mind is that the MIB downloaded are in general of a group of switches. So there are situations where a /OID MIB listed will work for a certain model of switch with certain level of firmware.

  RMON-MIB

  

  FastPath-cos-qos-mib

  

  Another method, some people have had success, done using a SNMP walk.

  http://www.snmpsoft.com/freetools/snmpwalk.html

  I hope this information helps. The method of importation for these MIBs can change based on the management/tracking software that you use.

  Thank you

• will not play DVD-problem with protection against digital copying between DVD drive decoder and map - ideo

  When I inserted a movie in the DVD drive and open Windows Media Center and clicked "play DVD" a popped up message: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. How can I do this?

  Hi Carol,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems playing a DVD with Windows Media Player?

  Please answer these questions to better understand the issue and help you.

  1. using Windows Media Player or Windows media center?

  2. is the specific question about a DVD?

  Follow the methods mentioned below:

  Method 1: refer to the article mentioned below:

  The Player Windows Media DRM: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-DRM-frequently-asked-questions

  Method 2: Uninstall and reinstall the video card drivers and see if this is useful:

  Follow the steps mentioned below:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the graphics card, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer/device manufacturer site, download the updated drivers and install them.

  See the article:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• I constantly problems while browsing with Google yahoo simply grab my research and won't let me come back to google. I have tried everything I can think

  This happening on my macbook pro and my I mack. Also on my PC but only on firefox.

  Hi TheJohnParr, to your Thunderbird (e-mail client) problem, I you suggest have another question for this, and we could concentrate on your Firefox search engine problem in this thread.

  You can view, disable and usually remove extensions on page modules. Either:

  • Command + shift + a
  • Tools menu > Modules

  In the left column, click Extensions. Then, when in doubt, turn off.

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

  Moreover, the address bar works a bit different in the search boxes (homepage search box or the search box toolbar). If you enter a single word without spaces in the address bar (for example, hobbit or mozilla.org) then Firefox should first check with your provider if there is a known server name. Sometimes, these queries are diverted by your service provider to show you search results. By comparing your search in the address bar and the search box, you can see if it comes to the question.

• Why my php export feature does not work in IE and not firefox?

  Why my php export feature does not work in IE and not Firefox? I wrote a web application that contains a SigmaGrid. Grid controls reload, add update delete, print and export to CSV all work in IE8. The export function does not work in Firefox.

  Have you tried to test your application on IE7/8/9 and FF10/Chrome/Opera?

• I have a problem. Update of Flash Player required you must download and install the latest version of Adobe Flash Player to view this content. but my Flash player is up-to-date. I use ubuntu10.4, firefox 8.0

  I have a problem. Update of Flash Player required you must download and install the latest version of Adobe Flash Player to view this content. but my Flash player is up-to-date. I use ubuntu10.4, firefox 8.0

  You are welcome

• my iphone 5s problem could not complete touch setup ID come back please and try again... I need to fix the problem

  my iphone 5s problem could not complete touch setup ID come back please and try again... I need solve the problem... Thank you

  Same question! Please help. I have installed 9.3.1 on iphone 5 s. error message"could not complete touch setup ID come back please and try again. »