Problems using OPatch

Similar Questions

• Compaq Evo D5pM - problems using this model number, never find what he listed...

  Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

  Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

  My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

  I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

  Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

  I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

  It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

  PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

  Hello:

  Your model is a d500 CMT HP.

  1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

  Type of memory: , (non - ECC)
  Maximum memory: 3 GB
  Slots: 3

  This is the page for support and drivers for your PC.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

  QuickSpecs:

  http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

  Because nobody does more than the memory, it will be hard to find and very expensive.

  You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

  You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

  http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

• I have problems using the parental control. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  I have problems using parental controls. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  Have you followed all the steps like that?

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-parental-controls-to-filter-websites-in-Windows-Vista/

  It is an alternative.

  http://explore.live.com/Windows-Live-Family-Safety?OS=other

  http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety

  If this post answers your question, click mark as answer .

• unknown problem using WMP 12 no sound when played the song in the folder but has sound when he played in the player

  Hi all

  I have a weird problem using WMP (Windows Media Player v12).  When I double-click a song of in my library, the trail seems to play, but didn't have all the sounds.

  However, if I hover over the same path and then click Preview, the pop-up, the track plays with sound.

  When the track (s) do not play, all indications show the way to correctly play through of progress ' Now Playing ' screen, but no sound.

  In the past, when I clicked on any MP3 file, he would play using WMP.  Now, when I click on an MP3 file, it brings just "Now Playing" and looks LIKE he plays, but no sound.

  I have looked & looked for clues as to why it may be of WMP, but I can't understand the problem.  I also searched the Web for 'day' drivers in the Win System Manager, but Win says that pilots are "up to date".

  I have rebuilt the DB Library (twice) by removing the DB files in from WMP to a procedure in a WMP support forum. I also went to check the audio device in Device Mgr Win (mine is one on one). Everything seemed ok.  I also changed the devices to "Win by default" to what I think my onboard audio device is called.  I thought that that can do, but it's not.

  I was struggling with this since the day of the year.  Please help me solve this problem!

  Here is a link to my system features:

  http://Speccy.Piriform.com/results/0JAQshtlODwFxgwHeGb4rfq

  Hi, Pie,

  Welcome to the Microsoft community.

  Appreciate your efforts to try to resolve the problem that you have set so far. I guess that is not a problem with the driver that ultimately, the songs are playable using the media player. It could be a corrupted in Windows Media Player framework that is causing the problem. Let's run the Windows Media Player troubleshooting utility that resets all parameters to the player. Check out the link to do so:

  http://Windows.Microsoft.com/en-za/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Please let us know the results.

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• Why do the downtime when you apply a patch using opatch?

  Hello Experts,

  Version: 11.2.0.3

  Platform: OEL 5.5

  I would like to know why we need downtime when you apply a patch to a single instance using opatch database? Is it because the binaries get relinked after the patch?

  Thank you

  Satya

  2750208 wrote:

  Hello Experts,

  Version: 11.2.0.3

  Platform: OEL 5.5

  I would like to know why we need downtime when you apply a patch to a single instance using opatch database? Is it because the binaries get relinked after the patch?

  Thank you

  Satya

  Yes, most patches require a restoring links and who will be demanding the oracle process to stop.

  Aman...

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Problem using the REST API by wavemaker

  Hello

  I have a problem using other api with wavemaker. When I do a query GET with the RESTClientin FireFox, everything is fine for example:

  get https://XXX.XXX.XXX.XXX:8281 / vco/api/result:
  

  
  Status Code: 200 OK
  Cache-Control: private
  Content-Type: application/xhtml+xml;charset=UTF-8
  Date: Sun, 06 Apr 2014 16:50:04 GMT
  Expires: Thu, 01 Jan 1970 00:00:00 UTC
  Server: Apache-Coyote/1.1
  Transfer-Encoding: chunked
  

  But when I try to connect to the same url using wavemaker I recive: the answer is not in a valid XML Format.

  I use Orchestrator 5.5 and far as I could see the token is no longer required in the header. Anyone know why I get this error message?

  Thank you!

  

  Well half a day looking, then finally I thought to it:

  The header should be: accept: application/xml

• Are there problems using Adobe CC with 10 Windows?

  Are there problems using Adobe CC with 10 Windows?

  Hi Michael,

  This might be useful: https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  Kind regards

  Sheena

• Problems using preset animations of the bridge

  Hi all

  Use the CC range and recently had a new problem using the animation preset from Adobe Bridge. I am in After Effects as usual and then go to the animation drop-down menu, click on Browse recent presets to open the bridge, and then as a use normal bridge to select the preset I want. Double click it while emphasizing my piece selected in AE, and AE then says this:

  

  And even error codes no matter what effect/animation I choose, if his image, video or text.

  If I just go a little in AE, my recent animation preset and choose one of there it loads up absolutely perfect. But it's embarrassing massively.  Any ideas? This problem appeared out of nowhere.

  This is fixed in the 2014.2 effects after update (13.2), which is now available.

  Details here: http://adobe.ly/1IVopxh

• Rogue Oracle houses when you use Opatch

  Hi, I use Opatch (in this case to check a patch conflicts) before applying the power supply 11.1.0.7.6
  
  The Opatch session seems to be picking up rogue Oracle Homes (probably from the previous sessions of cloning or installs previous). It is also a mistake to throowing
  
  Name = APPSIAS_LPROD, rental = "/ fs03, LPROD, lprodora, iAS.
  Name = APPSIAS_LDEV2, rental = "/ fs19, LDEV2, ldev2ora, iAS.
  Name = APPSIAS_LUAT, rental = "/ fs22, LUAT, luatora, iAS.
  Name = OraDb11g_LUAT, rental = "/ fs22/LUAT/luatdb/product/11.1.0/db".
  Name = ORACLE_HOME1, rental = "/ fs03/LPROD/lproddb/8.1.7".
  Name = APPSDB_LDEV2, rental = "/ fs19/LDEV2/ldev2db/9.2.0".
  Name = OraDb11g_LUAT1, rental = "/ fs22/LUAT/luatdb/product/11.1.0/db_1".
  Name = OraDb11g_LPROD, rental = "/ fs03/LPROD/lproddb/product/11.1.0/db".
  Name = APPSDB_LUAT, rental = "/ fs29/LUAT/luatdb/product/11.1.0/db".
  INFO: Throwable occurred: OracleHomeInventory gets oracleHomeInfo null
  The machine is converted to Exception and stored in the result object.
  
  where is Opatch pick up these houses of and how to reset Opatch to pick up the houses good
  
  Jim

  It seems that the houses of thugs are as a result of E-Business suite cloning. It seems that the cloning utility does not correctly clean local inventory.

  I've been ablle to eliminate rogue homes manually. I've also will be able to regeneraqte a global inventory on this basis, as appropriate

  Thank you
  Jim

• How to use opatch?

  Hello world!
  
  I would like to know how to use opatch?
  
  I downloaded the patch: 8350262
  
  Can be found in D:\p8350262_10204_Generic.zip and also
  D:\p8350262_10204_Generic
  
  Tried to do this by using the command line
  

  D:\oracle\product\10.2.0\db_1\OPatch>opatch lsinventory
  Invoking OPatch 10.2.0.4.2
  
  Oracle Interim Patch Installer version 10.2.0.4.2
  Copyright (c) 2007, Oracle Corporation.  All rights reserved.
  
  
  Oracle Home       : D:\oracle\product\10.2.0\db_1
  Central Inventory : C:\Program Files\Oracle\Inventory
     from           : n/a
  OPatch version    : 10.2.0.4.2
  OUI version       : 10.2.0.4.0
  OUI location      : D:\oracle\product\10.2.0\db_1\oui
  Log file location : D:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2011-
  03-07_16-44-23PM.log
  
  Lsinventory Output file location : D:\oracle\product\10.2.0\db_1\cfgtoollogs\opa
  tch\lsinv\lsinventory2011-03-07_16-44-23PM.txt
  
  --------------------------------------------------------------------------------
  
  Installed Top-level Products (2):
  
  Oracle Database 10g                                                  10.2.0.1.0
  Oracle Database 10g Release 2 Patch Set 3                            10.2.0.4.0
  There are 2 products installed in this Oracle Home.
  
  
  There are no Interim patches installed in this Oracle Home.
  
  
  --------------------------------------------------------------------------------
  
  
  OPatch succeeded.
  
  D:\oracle\product\10.2.0\db_1\OPatch>opatch auto D:\p8350262_10204_Generic\83502
  62
  Invoking OPatch 10.2.0.4.2
  
  Oracle Interim Patch Installer version 10.2.0.4.2
  Copyright (c) 2007, Oracle Corporation.  All rights reserved.
  
  Syntax Error... Unrecognized Command or Option: 1st argument must be one of the
  following:
     apply
     napply
     rollback
     nrollback
     lsinventory
     lsinv
     query
     util
     prereq
     version
     -help
     -h
  Please use the option 'opatch  -help' to get correct syntax
  
  OPatch failed with error code = 14
  
  D:\oracle\product\10.2.0\db_1\OPatch>opatch auto D:\p8350262_10204_Generic\83502
  62
  Invoking OPatch 10.2.0.4.2
  
  Oracle Interim Patch Installer version 10.2.0.4.2
  Copyright (c) 2007, Oracle Corporation.  All rights reserved.
  
  Syntax Error... Unrecognized Command or Option: 1st argument must be one of the
  following:
     apply
     napply
     rollback
     nrollback
     lsinventory
     lsinv
     query
     util
     prereq
     version
     -help
     -h
  Please use the option 'opatch  -help' to get correct syntax
  
  OPatch failed with error code = 14
  
  D:\oracle\product\10.2.0\db_1\OPatch>opatch auto D:\p8350262_10204_Generic\83502
  62
  Invoking OPatch 10.2.0.4.2
  
  Oracle Interim Patch Installer version 10.2.0.4.2
  Copyright (c) 2007, Oracle Corporation.  All rights reserved.
  
  Syntax Error... Unrecognized Command or Option: 1st argument must be one of the
  following:
     apply
     napply
     rollback
     nrollback
     lsinventory
     lsinv
     query
     util
     prereq
     version
     -help
     -h
  Please use the option 'opatch  -help' to get correct syntax
  
  OPatch failed with error code = 14
  
  D:\oracle\product\10.2.0\db_1\OPatch>opatch apply D:\p8350262_10204_Generic\8350
  262
  Invoking OPatch 10.2.0.4.2
  
  Oracle Interim Patch Installer version 10.2.0.4.2
  Copyright (c) 2007, Oracle Corporation.  All rights reserved.
  
  Argument(s) Error... Patch Location not valid
  
  Please check the arguments and try again.
  
  OPatch failed with error code = 135
  
  D:\oracle\product\10.2.0\db_1\OPatch>opatch apply D:\p8350262_10204_Generic\8350
  262
  Invoking OPatch 10.2.0.4.2
  
  Oracle Interim Patch Installer version 10.2.0.4.2
  Copyright (c) 2007, Oracle Corporation.  All rights reserved.
  
  
  Oracle Home       : D:\oracle\product\10.2.0\db_1
  Central Inventory : C:\Program Files\Oracle\Inventory
     from           : n/a
  OPatch version    : 10.2.0.4.2
  OUI version       : 10.2.0.4.0
  OUI location      : D:\oracle\product\10.2.0\db_1\oui
  Log file location : D:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2011-
  03-07_16-42-28PM.log
  
  ApplySession applying interim patch '8350262' to OH 'D:\oracle\product\10.2.0\db
  _1'
  
  Running prerequisite checks...
  Prerequisite check "CheckActiveFilesAndExecutables" failed.
  The details are:
  
  Following files are active :
  D:\oracle\product\10.2.0\db_1\sysman\jlib\emCORE.jar
  D:\oracle\product\10.2.0\db_1\sysman\jlib\emCORE.jar
  D:\oracle\product\10.2.0\db_1\sysman\jlib\emCORE.jar
  D:\oracle\product\10.2.0\db_1\sysman\jlib\emCORE.jar
  ApplySession failed during prerequisite checks: Prerequisite check "CheckActiveF
  ilesAndExecutables" failed.
  System intact, OPatch will not attempt to restore the system
  
  OPatch failed with error code = 74

  How can I apply this patch?
  
  Please guide me.
  
  Thank you very much!
  
  Nith

  Have you applied all the steps documented in the Readme of the patch?
  It seems that you must stop a dbconsole/grid control agent before applying the patch.

  lsinventory option lists installed games patch and fixes.

  Edited by: P. Forstmann March 7, 2011 09:51

• Someone at - he will meet similar problem using TextFieldAutoSize.CENTER and \n?

  Someone at - he will meet similar problem using TextFieldAutoSize.CENTER and \n?
  
  The following works as expected except that the text does NOT Center. He left aligned. I JUST also tried, but nothing helped. It is probably simple, but I rewrote the text and made the examples in the manual. Line with the numbers that it defines the width of the text box, but not the other centre of lines like I hoped.
  
  public void LessonPlan (): void {}
  var lessontext:TextField = new TextField();
  lessontext.autoSize = TextFieldAutoSize.CENTER;
  lessontext. Text = "only these \n Keys\nDo Something\nreturn/enter\n <>--\n0 1 2 3 4 5 6 7 8 9";
  lessontext.x = 500;
  lessontext.y = 10;
  lessontext. Background = true;
  lessontext. Border = true;
  var format: TextFormat = new TextFormat();
  format.font = "Verdana";
  format. Color = 0xFF0000;
  format. Size = 12;
  lessontext.setTextFormat (format);
  stage.addChild (lessontext);
  }
  
  Thanks in advance for a quick solution.
  

  Just add:
  format. Align = "center";
  for your work of TextFormat property.

• Problem using friendly URLS SE

  Someone at - he had problems using the URL search engine friendly and css? I have a page which seems fine when I go to the page with the following url: http://localhost/demo/index.cfm. However if I change the url to http://localhost/demo/index.cfm/about-our-company the page behaves as if the css style sheet is not found. I'm totally clueless as to what could be the cause. Someone has an idea? I would really appreciate it!
  
  Thank you
  
  Jason

  Must have been some kind of problem with cache bug or something. I put all css links and all links to the absolute image links ( http://localhost/demo/styles/style.css). After coming back to it starts to work. don't understand, but the url can be a/search-engine-friendly-parameter after it and the page appears correctly.

  Thanks to Stressed_Simon and Ray Camden for pointing me in the right direction!

  Jason

• Problem using multiple declarations

  I'm having a problem using several WITH instructions. Oracle seems to be waiting for a SELECT statement after the first. I need two to refer to things from each other in another query.
  
  Here is my code:
  
  < code >
  WITH calculate_terms AS (SELECT robinst_current_term_code,
  CASE
  WHEN robinst_current_term_code LIKE ' %' 60' THEN robinst_current_term_code - 40.
  WHEN robinst_current_term_code LIKE ' %' 20' THEN robinst_current_term_code - 100.
  END first_term
  
  CASE
  WHEN robinst_current_term_code LIKE ' %' 60' THEN robinst_current_term_code - 100.
  WHEN robinst_current_term_code LIKE ' %' 20' THEN robinst_current_term_code - 160.
  END second_term
  
  OF robinst
  WHERE robinst_aidy_code =: sanra)
  
  / * Use the terms of calculate_terms to generate attendance periods * /.
  WITH gen_attn_terms AS
  (
  SELECT
  CASE
  WHEN first_term AS '60% ' THEN 'fall'. substr (first_term, 0, 4)
  WHEN first_term LIKE '% 20' CAN 'spring'. substr (first_term, 0, 4)
  END first_attn_period
  
  CASE
  WHEN second_term AS '60% ' THEN 'fall'. substr (second_term, 0, 4)
  WHEN second_term LIKE '% 20' CAN 'spring'. substr (second_term, 0, 4)
  END second_attn_period
  
  OF calculate_terms
  )
  
  SELECT *.
  
  OF gen_attn_terms
  < code >
  
  I get ORA-00928: SELECT key word error absent. What could be the problem?

  You can just separate them with a comma:

  WITH calculate_terms AS (SELECT robinst_current_term_code,
  CASE
  WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '40'
  WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '100'
  END first_term,
  
  CASE
  WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '100'
  WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '160'
  END second_term
  
  FROM robinst
  WHERE robinst_aidy_code = :aidy),
  
  /*Use terms from calculate_terms to generate attendance periods*/
  gen_attn_terms AS
  (
  SELECT
  CASE
  WHEN first_term LIKE '%60' THEN 'Fall '||substr(first_term,0,4)
  WHEN first_term LIKE '%20' THEN 'Spring '||substr(first_term,0,4)
  END first_attn_period,
  
  CASE
  WHEN second_term LIKE '%60' THEN 'Fall '||substr(second_term,0,4)
  WHEN second_term LIKE '%20' THEN 'Spring '||substr(second_term,0,4)
  END second_attn_period
  
  FROM calculate_terms
  )
  

  Not yet tested there is no scripts.