Problems when trying to access the Internet using the connection to the network wiressless
Original title: via a wireless router problem.
I have a problem of signing on the internet through a Linksys WRT54G2V1 wireless router model. I use Windows Vista Service Pack 2. When I start my computer, it is not the sign on the internet, even if it is connected to the wireless router. After I unplug the router for 20 seconds and then plug it in again, my computer will sign it on the internet. In the meantime, my wife's computer has no problem signing on the internet via the wireless router. What should I do to fix my sign on the problem?
Hello
Did you make any changes before the show?
You can see the following link.
Windows wireless and wired network connection problems
Method 2:
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
NOTE: turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
You can try resetting the TCP/IP stack.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357
Network adapter problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Tags: Windows
Similar Questions
-
"Not connected to the internet" when trying to access the help files
original title: when I try to access the help topics in the utility of Windows backup and some other programs I get a screen in the right panel that says I am not connected to the internet when I am.
When I try to access the help topics in the utility of Windows backup and some other programs I get a screen in the right panel that says: I am not connected
to the internet when I am. Does anyone have a solution to this problem so I can use the help topics?Hi advbill,
You try to access the items online or offline help?
a. press F1 on the keyboard.
b. click Options, and then click settings.
c. check to improve my search online help
d. click on apply and OK.
-
Error when trying to access the microsoft update web site
I am using windows XP Pro. SP3 32-bit (build 2600.xpsp_sp3_gdr.100216 - 1514)
I have IE v8.0.6001.18702
When I access the microsoft update web site, I get a message saying that I need to update windows update and I want that allows. No matter what I said or after 30 seconds have elapsed if I do nohting I get the message:
- The instruction at "0 x 08100068" referenced memoery to '0 x 08100068', the memoery could not be "written".
The address is different from one attempt to another, but both are still the same as eachother.
When I close this tab IE grave message box down and I get the message 'recovered tab' normal.
Can I search / install updates using vbscript widely available, or automatic update installation of windows. The problem only occurs when you try to access the web site itself.
I tried to download and install the latest windows update manually, but this does not solve the problem.
I am unaware of the date of the last update because I'm unable to access the update log.
I use a current version of McAfee Anti-virus.
I think my windows is a clean install, but I didn't do it, so I can't be 100% certain.
Jacob
I uninstalled ie8 and found ie7 under him.
I am able to access the site WindowsUpdate using ie7.
Jacob
-
Title: Cannot access computers on my network?
For some reason any my computer won't let me access any computer on my network.
When I try to open any computer, including mine, since the tab "network" on the left he gives an error message saying "\\N-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network provider name is invalid.I ran the corner store to home group and network troubleshooting & two is out clearly said there are no problem.Anyone know how to fix this?Hello
-What are the versions of the operating system installed on the conencted to computers in the network?
-Did you do changes on the computer before this problem?
Step 1: I suggest you to choose a network location, and then try to access the computer and check if it helps.
Choose a network location
http://Windows.Microsoft.com/en-us/Windows7/choosing-a-network-location
Step 2: I also suggest you to check the network troubleshooter event logs to solve network problems and to check if it helps.
Use Network Troubleshooter event logs to solve network problems
Step 3: If the problem persists, I suggest you to follow the steps from the link and check if the problem persists.
Why can't I connect to other computers?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers
For reference:
Networking of computers running different versions of Windows
Step 4: Disable the Antivirus
I suggest to disable the Antivirus/Firewall temporarily, then check the issue.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-offNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.Note: Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
Hope this information helps.
-
Got "the page you are trying to access is not valid." When trying to access the document
We have an EchoSign document already sent to the clouds to Adobe via API v20, after successful sending that get the URL to access the document. And in our application that is a cluster with two application servers, say a server and Server B and send the document to Adobe via the server. Now, when you try to open the URL of the document from Server A, it is well; but when you try to open the URL of the server B, it reports that "the page you are trying to access is not valid.". Any idea on this? For Server A and Server B, the URL is the same, is not why this happens.
Hello Usman,
We have already solved the problem. That's the problem on our side. :-)
Thank you
Qing
-
When you try to access the tab to pay the buyer work center items get error:
You have encountered an unexpected error. Please contact the system administrator for assistance. (Without any additional information)
Please need help on how to solve this problem.
Thank you
Rambeau
It seems bug-
Please see - Center of the buyer: make an Exception when clicking on PAY tab ELEMENTS (Doc ID 1993378.1)
Kind regards
Kiran
-
I have download the proposed file that is supposed to fix the problem, but it still does not work. Can anyone help?
Thank you
Penny
Hi PLPPUB
We wanted to know the configuration of the following:
Version of Microsoft Office and it is 32-bit or 64-bit.
Presenter installed on computers 32 bit and 64 bit without any problems, unless you install 32-bit presenter on 32-bit Office and similarly 64 bits.
To check the version of your office, go in Powerpoint, click the file option in PowerPoint
Click Help. Look for the image below.
Now, download the correct version of the presenter of http://www.adobe.com/cfusion/tdrc/index.cfm?product=presenter&loc=en_us
Please download 32-bit presenter if you 32-bit office and so for 64-bit
Thank you
Mahesh
-
Problem when trying to install the Catalyst 8.2 on Satellite A200 - 1 k
Hello
recently, I had to go back to Windows XP, because I had problems to run some old stuff I have and I need to run it.The laptop has an ATI Mobility Radeon HD 2400, and I installed Windows XP Professional 32, so I downloaded the correct drivers but when im their installation I get an error that say or the driver is not for my windows or is not for my hardware graphics card aka :(
Since I like the games, I want to have the driver took to install on the laptop so I can play them whitout that no problem, but I can't install the latest driver for it.
Thank you for your help in advance :D
It is well known that Toshiba uses the graphics drivers updated the and if you try to use the driver downloaded from the website of manufacturer of graphics card you won't be able to install it. For the mobile computing drivers are supported by the laptop manufacturer.
-
Error "Change Windows settings" when trying to access the installed program Pastel 11
Original title: can not enter in the program that I installed
I installed the version 11 of pastel and all succeeded but now I'm trying to enter pastel it is said to change windows settings. How do I do that?
Try to reinstall by using compatibility mode.
See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.
Windows 7 Compatibility Center
Check if your application software or hardware is on the list
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Software:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software
You can also try to run the program in compatibility mode
You can find more information on compatibility modes in the articles below:
http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question
The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:
Run in Windows XP Mode requires:
(1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).
Windows XP Mode and Windows Virtual PC
http://www.Microsoft.com/Windows/Virtual-PC/default.aspx
Windows XP Mode now accessible to more than PC
Get started with Windows Virtual PC
http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx
http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/
Windows 7 - upgrade Express features:
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade
-
Problem when trying to create the graphic style...
I am trying to create a menu of the nave and to do this, create a unique graphic style that can reach my end goal. I can get what I want using a distinct form, but that defeats the purpose of the unique graphic style. I thought I could achieve the look by using an effect under
Effect>Pathfinder
But that is not the result I was expecting. Below you can see what the graphic style looks like currently, so I want to add to it (the brilliant) if all goes well in the same graphic style. Is this possible?
Try this:
-
Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?
Hi Jer9009,
Welcome to the Microsoft answers site.
· Could you give the exact error code or error number you get?
To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.
A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.
For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge
Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?
Hello raulganau, welcome.
I suggest to try the system restore to restore the system to a date before the problem started. Try this...1. click on START2. click on "all programs".3. click on "Accessories".4. click on "system tools."5. click on "system restore."6 follow the instructions on the screen to restore the system to a date before the problem startedAlthough the system restore does not target the personal data, I recommend always backup your personal data, just in case something happens.For reference, I have included a link that provides more specific information about the restoration of the system and how to use it:Let us know if it works,Thank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I try to convert a file to PDF or PDF I get the error message ' year error occurred while trying to access the service "what can I do to fix? I already applied the updates and attempted to correct?
You could always connect to Acrobat.com directly and use the service via the web site, if it's a critical need.
-
13 things on PC and he was also on an old laptop which is now destroyed - when trying to install the new laptop receiving message - serial number already in use by maximum permitted computers - HELP
You will need to contact Adobe directly. Work your way through this document. Try to open a chat session.
-
Hello. I have a problem with the payment process when trying to buy the plan of creative photography of Cloud (one year).
the error is: there was a problem processing your order, please contact our Service team customer care for assistance. Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English + 44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French + 44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, the Morocco and the Algeria: + 33 United Arab Emirates 157324642United: 80004443085Commonthwealth of independent States (CIS): + 44 207 365 0735
Help me please to solve this problem. I need my lightroom immediately)
Hi mohamed,.
Please see the link below to buy the plan of photography:
Pricing plans and creative Cloud membership | Adobe Creative Cloud
In case you still have question, please contact sales at Adobe team.
Adobe Middle East and North Africa
Kind regards
Sheena
Maybe you are looking for
-
Got the phone on with metroPCS, worked for a day, said the other research. Waited a week and decided to switch to cricket, switched to cricket, of course, it worked for a day and said the research, what is the problem?
-
Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» » Following message appears first BIOS version: Worm. current 3.40-> update version 3.70THIS Version: worm. current 1.30-> update version 1.
-
Photo editing program does not work when you change the color and brightness.
I'm trying to change my photos. When I try to make the picture turns into a bunch of dashes and spaces. I believe that the photo program is corrupted. It crashed the PC and reload the OS X El Capitan.
-
Please note that I have enable the ap mode. It appers Ip of my router connection is the same for my modem. I now can't seem to connect to the all routers administration page. How would I fix this? I have a Netgear R6250
-
I can see all of the programs listed in Add/Remove Programs option in the control panel. When I select a program in the list, there is no option to remove / uninstall the program. I tried a lot of programs and none give me the option?