Problems with a digital slide switch.

Similar Questions

• Problem with the digital signatures of workers govt

  If I get emails quite frequently NAVAIRSYSCOM workers via my e-mail from work which is the right company, no Government excuseraient. On my last phone an orginal Droid, a few emaisl would tell me there was a problem with the digital signature for e-mails, but I always saw the e-mail itself.

  Since switching to the Maxx HD, I can see no longer the body of emaisl to these people. All I get is a "impossible to decrypt this message." It is not every person govt, but enough that it is very frustrating. Any ideas on how to work around this problem? and I know that the message is not encrypted, I can see fine by Exchange and we are app.

  We have a couple of our team focuses on similar issues. Passing this along.

• Error - Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Cannot read any DVD.

  Original title: unable to play any DVD

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I tried to update all the drivers but the problem persists

  Hi Neil,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what version of windows Media Player do you use?

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  
  Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• My laptop is windows 7 and with most of DVD it says that there is a problem with the digital copy. I'm also having trouble changing the region

  the exact message is: "windows media player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. When I click close it comes with this another message saying that my DVD system is set to the region one and I need to change it to region 2. I have change for the region, but he said: "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. ». I don't know what to do.

  There is a chance that the free VLC Media Player
  would be to read your DVD without changing the region code.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Hello, I have problems with the digital signature on the software. It displays the error message: 2148073510. Could someone help me?

  Hello, I have problems with the digital signature on the software. It displays the error message: 2148073510. Could someone help me?

  Hello

  I would ask you go through the next thread once and see if that fixes the problem.

  Error 2148073513 when you try to digitally sign Acrobat 11 standard

  Concerning

  Sukrit diallo

• Problems with the digital input/output

  Hello

  I have a little problem with my card PCI-6143. I would use two connectors digital one as a starter and one as an output. Now, I have the problem that I do not know how I address them. The input works as I want but not the output.

  As an example. I call my channel output on this name: Dev1/port0 / line0:0.
  With this call, the application works very well. If I change the output channel to Dev1/port0 / line4:0 I get an error that the values can be read and 0 and 1 are valid values.
  I hope that the call is right, I wrote that out of my head.

  My questions are. Is it correct to call a single digital channel with this name?
  I'm not sure because I do not understand what these means 'line' and if I allocate really single channel or more.
  The second question is, can someone give me an example of how I assign two digital channels (how to address them)?
  I know it's maybe an easy question, but I can't seem to get it corrected.

  Hope someone can help me.

  Best regards

  The syntax that you use is intended to select several channels: the numbers are the initial and final channel in a subsequent channel list. Thus, written Dev1\port0\line0:4 means 5 lines are included in the read/write (FWIW written 4:0 has the same effect). It is redundant but good writing line0:0, which means a single line, but you can write to Dev1\port0\line0 which is simpler.

  This is a help page on this topic.

• Problems with config Small Business switch

  Hi, I know that if I read the documentation I will come for answers, but I'd really like some input from someone with more knowledge than me. I have a problem with Cisco SF300, one of the Small Business switches. I have a single interface on my router and I need to separate my internal networks, I thought that one way would be to use VLANs. On my two internal networks a network has D-Link unmanaged switches, the other has the Cisco SF300 I did as follows.

  On the Cisco Switch, all of the default ports for ports of junction. I changed FE1-FE24 and GE1-2 to access ports.

  Created two VLAN and placed FE1-FE24 in VLAN10 (also my management VLAN), GE3 is a trunk Port for unidentified VLAN20, VLAN 20 uplinks to my DiLink switches. This way my unmanaged switches traffic arrives on a trunk on VLAN20 untagged port.

  GE4 is a trunk port and I assigned to VLAN1 untagged, tag VLAN10 VLAN20 tag and. 10 of VLANS and VLAN 20 then to my router.

  The plan was to connect GE4 to my router, but I had two things happen that I can't explain.

  All first as soon as I connected my D-Link to GE3 LAN on VLAN20 came down, I couldn't ping servers from computers etc, all devices are connected to the D-links unmanaged. Secondly, the responsibilities of VLAN changed on GE3 GE4, VLAN 10 and 20 disappeared and only the VLAN by default was assigned, also under settings VLAN my state of interface VLAN for VLAN20 shows people with reduced mobility. One of my FE12 continues also to change VLAN access ports.

  Can anyone offer any suggestions as to what might have crushed the LAN and why change my VLAN. I wrote my config running at startup configuration incidentally.

  I added two screenshots.

  Seriously, I'd appreciate the help.

  Thank you

  Bob

  Hi Bob,

  Could you please post a topology? I can help with this, but it would be much easier that I could see your network.

  Thanks in advance,

  Garrett

• problem with multiple digital signatures by deactivating the fast web view

  Hello, I use acrobat pro 9.1 and have questions regarding a problem with several signatures on a pdf document.

  Why I ask the question below? My job is to prepare PDFs for submission to the FDA. The FDA requires, among other things, the documents submitted electronically have quick view active web.

  I am currently exploring ways to use digital signatures to sign pdf reports and always make sure they are spec FDA compliant. My question concerns a document which would have several signature fields. What I do, it is to create at least two signature fields in the doc and then save and optimize everything for fast web viewing. When I connect the first box and save, the file retains the fast web view state. Yet, when I apply and signatures past one, the file is then left for quick web display with no obvious way to turn it back on. I'm confused as to why it gets disabled after the second, and not just after even the first condition has been signed. And, of course, I would like to know if it is possible to maintain the fast web view and how to do it. I will gladly accept "tinker under the hood' suggestions file if they exist as well.

  Please let me know if something is not clear or you would like more information.

  Thanks for your time and your help.

  ~ Vlad
  

  Hi Vlad,

  Real Michael has got the right answer. A "Linearized" file (which is a file that has been optimized for fast Web view) aims to get the first page to display as soon as possible so that you can start playing without waiting for the rest of the file to download. Incidentally, the first designated page should not necessarily be page 0 (use of PDF has zero according to the pages counting system), but it usually is. The PDF specification, "the main objective of linearized PDF is optimized PDF documents viewing read-only. It is expected that the linearized PDF generated once and read many times. Incremental update is still permitted, but the PDF is is more linear and subsequently is treated as ordinary PDF. »

  When you open a PDF file the first time that the backup process is a full 'save', it is the whole document is rewritten, so there is no more than two percent markers EOF (end-of-file) inside. The first expressions of folklore means what page to see the first and the second EOF designates the end of the rest of the file (so the browser knows when to stop downloading). However, when you add a second signature (or even longer) the file is saved as a "record growth" and new data is appended to the original file. It is that you can do a restore to the previous signed version and allows Acrobat/Reader verify the integrity of each signature regardless of any other signatures. It's the incremental save, breaking the linear optimization of the file.

  Steve

• Problems with boxes and slide do not pause.

  Hello

  I continue to struggle with trying to keep the slides paused while the user interacts with buttons or areas to click on my pages. I tried to use the click box hidden out of the Tower, but it does not work for me.

  I would be eternally grateful if someone could take a look at this slide and let me know that I can get this to work. It's something I will do again and again (in different ways), so I really need to figure this out once and for all.

  Someone is willing to work with me on this? Even if it is offline, I am pleased to publish the results as soon as we have them working.

  Here's the problem:

  In the slide, the user has several options to choose from. They are to click on the options they think are correct. I placed boxes click on each option with attached actions. However, it seems that the March slide happily on his way with every click, so that finally the click boxes are no longer available to click. What can I do to stop this?

  Captivate 4 file attached.

  Hello

  I downloaded the file and it looks into Captivate.

  What seems to be the case, it's that when you click, the break is released. Therefore, a way to "reset" from the reading head.

  Why not try to create a tip Action that performs projection, hiding and resetting the read head?

  It is relatively simple. You use a Standard of the Show Action. Standard action of hide and seek. Then follow in the end with a reset of the read head. Normally, I use a transfer action. I assignrdcmndGotoFrameAndResume the value of rdiinfoCurrentFrame - 5 (to save the 5 frames).

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Problem with zoom Digital of Smartphones blackBerry (())

  I can't take a picture with a zoom. I tried to change my setting turned on and off, but no use... I need a solution to this problem!

  Try this-

  When your device is turned on, remove the battery for a minute and then reinsert the battery. This do a reboot your device that minor problems with the BlackBerry.

• problem with / s digital correlated on USB-6341

  I'm testing an application that fact/s digital correlated, written in C++ with a USB-6341. I use NEITHER-DAQmx version 16.0.0f0.

  Because this application will be used by people with a variety of different DAQ hardware, I tried to write it to manage a lot of contingencies. Then when I put in place a DIO task correlated for the release, I'm trying to determine the width of the channel:

  uInt32 dataBytes;

  If (NIerror = DAQmxGetWriteRawDataWidth (h, & dataBytes))

  On my USB-6341 dataBytes returns 1, so I try to write data using DAQmxWriteDigitalU8(), but which returns an error saying:

  device USB6341:-200565: specified the digital channel contains more bits than supported by the 8-bit version of DAQmx Port write.

  Use the version of DAQmx Port write who takes in charge the broader digital ports.

  If I remove the test and force it to use DAQmxWriteDigitalU32(), then it works.

  I'm afraid that if I try to always use DAQmxWriteDigitalU32() I may be wrong with other devices that do not support 32-bit channels.

  Is this a bug in NOR-DAQmx associated with USB-6341? Have I misunderstood something about how it works?

  John,

  It seems that it is a known issue with DAQmx and a corrective action request was filed for this problem. For now, using the DAQmxWriteDigitalU32 should work fine if the device has ports 8-bit or 32-bit.

• Problem with the digital data to write VISA function

  I have a GE's PowerPC that is running on the VxWorks operating system. I have a tornado application where I run my C code to generate a file .o & .out, then I empty image .o files & .out for PowerPC via FTP, now I need to communicate with PowerPC of LabVIEW (via serial communication using VISA vi) using the VxWorks controls. When I enter orders VxWorks in LabVIEW

  That is to say for Eg: 1 > ls --> the contents of a directory list IE .o & .out files. The problem I'm facing here is, when I run the vi, I am able to read the file in the box to read the string but keep files on speeding up juice,

  2 > ld <> --> load a module object in memory. I face the same problem here.

  3 > then I need to type the name of funtion main c program, after which I can give input to the program.

  4 > I need to enter numeric data as inputs to my program. but the write VISA function accepts the only input string and read VISA function gives only out of string... I want to give digital entries and read the digital output.  Any help would be appreciated.

  Hi Luke,.

  You can try with this reliable hyperterminal VI.

  http://lavag.org/files/file/172-hyper-Terminal/

• Problem with a digital output in the information of an analog input

  Hello

  I use a SCXI-1000DC module with a module of the SCXI-1600, SCXI-1531 module and SCXI-1163 module to receive an analog of an accelerometer signal and a digital signal.
  I claim that the accelerometer is constantly monitored, and the output is on when I want to, by an impulse that I comand in labview.
  I use a rate 25 k and a 12, 5K samples per channel on DAQmx Timing.

  I notice in DAQmx read, if I put a sample of hight by channel, the output is not there when I want to, and if I put a few samples per channel, I exit when I want to, but the program seems to be slow with the passage of time. I don't know how I can solve this problem!

  I'm sorry for my English, and I hope you can help me.

  Thank you

  Silvia

  Hello Silvia,.

  If you ask a larger number of samples, the labview diagram will stay longer in the DAQmx Read function, so the while loop runs slowly, and the digital output is updated less often.

  I suggest that you use 2 separate while loops: one for the analog input and the other for digital output, so that each loop might run at a different speed.

  Best regards