Problems with Aero and Desktop Manager

Similar Questions

• BlackBerry smartphones "BOLD" problem Calendar Sync with PocketMac and Desktop Manager 4.6

  # The RIM case: 5499753

  I have 4 email addresses attached to my BB "BOLD".
  When I go into Options / Advanced / Default Services / calendar, I have 4 entries (all e-mail addresses).

  If I go to calendar, Options, there are all of an additional entry in "Default device" 4 as well as e-mail addresses.

  Regarding the calendar by address entries, it is divided as follows:

  Email 1) 1
  E-mail 2) 0
  Email 3) 50
  Default device) 38
  Email 5) 0

  When I try to synchronize, the desktop software sees only the #3 email that is my rogers.blackberry.net with 50 entries and sync in Outlook, resulting in a loss of events in my Outlook on my desktop. All events are still in bold.

  I can not also move all the elements of the default device and assign it to the category E-mail no. 3, which reduced from 38 to 37 and from 50 to 51.
  Once you have received an entry on the device, you cannot change the e-mail addresses associated with the event.

  Removing the servicebooks (CICAL all) the default device entry has the combined entries.

  Once the service books are sent to the device, it then splits them again.

  This seems to be a problem with the Blackberry "BOLD" operating system, or a problem of service book (since when CICAL service books are deleted, calendar entries all combine for peripheral list by default.)

  This also happens on WinXP with 4.6 DM, is not platform specific.

  OS: 4.6.0.125 & 4.6.0.134 tempted.  Both have the same result.

  Just got off the phone with RIM support.

  Here is the procedure:

  All backup data

  Do a thorough cleaning (Options, Security Options, General settings)

  Content compression set to disabled

  Save the settings

  Return to the General settings, Blackberry press button and wipe Handheld.

  Load DM and go to the backup/restore, advanced.

  Load your backup file.

  Restore only the peripheral calendar (drag the calendar on the right)

  You should be able to see in the calendar options, device default calendar with all the entries.

  Synchronize in Outlook.

  At this point, you should have all your entries in Outlook.

  Hard Reset (press left ALT + SHIFT RIGHT + DELETE and hold the button until it restarts the device)

  Go to the website of your provider BIS and remove all the entries that you want as the default calendar.

  Set the date and time on the device.

  Turn on the wireless Radio

  Return Service directories from the BIS website.

  Go to Options, advanced, default Services.

  Set default CICAL (this should be the one you really want to like the calendar by default and the only one on the device).

  Set the default CMIME if necessary.

  Add the e-mail addresses that you deleted on the BIS website.

  Return service directories.

  You should have all your e-mail addresses and no. peripheral in your calendar, by default.

  All entries in the calendar should be associated with the address you chose as the default value.

  Resync using DM.

  Note - PocketMac 4.1.25 is not supported with the "BOLD".

  This creates blockages and major sync issues.

  I have run this procedure from a computer running Windows XP with Office 2003.

• Problem with tween and event manager vignette (movieclip removes a scene)

  Hi im new to this forum thing so excuse my label if its inappropriate. Im having a problem with a hold of im file as2, this is a gallery of thumbnails 6 simple with coded interpolations. Once you click on a thumbnail then attached expansion is supposed to appear on the screen, it seems doesn't work after the first click a thumbnail, once the image appears then click it disappears, and this function only used to work once but now it does work only twice, but the second time around the bigger picture and cannot get rid of the stadium would be a problem of swapDepths?

  Here is my code, I've only fully coded first high tile left. enclosed please find my swf for the file, I could really do with help and everything would be appreciated thanks. I'm new on as you please be gentle.

  Stop();

  Import mx.transitions.Tween;

  Import mx.transitions.easing. *;

  _root.createEmptyMovieClip("container_mc",0);

  container_mc._x = (Stage.width) / 2;

  container_mc._y = (Stage.height) / 2;

  thumb1._alpha = 50;

  thumb1.onRollOver = function() {}

  new Tween (thumb1, "_alpha", Strong.easeOut, 50, 100, 0.5, true ");

  }

  thumb1.onRollOut = function() {}

  new Tween (thumb1, "_alpha", Strong.easeOut, 100, 50, 0.5, true ");

  }

  thumb1.onRelease = function() {}

  container_mc.attachMovie ("image1", "pic1", 2);

  new Tween (container_mc, "_alpha", Strong.easeOut, 0, 100, 2, true ");

  }

  container_mc.onRelease = function() {}

  This.Enabled = False;

  var myFadeOut = new Tween (container_mc, "_alpha", Strong.easeOut, 0, 100, 2, true ");

  myFadeOut.onMotionFinished = function() {}

  container_mc.unloadMovie ();

  }

  }

  Thumb2._alpha = 50;

  Thumb2.onRollOver = function() {}

  new Tween (thumb2, "_alpha", Strong.easeOut, 50, 100, 0.5, true ");

  }

  Thumb2.onRollOut = function() {}

  new Tween (thumb2, "_alpha", Strong.easeOut, 100, 50, 0.5, true ");

  }

  thumb2.onRelease = function() {}

  container_mc.attachMovie ("image2", "Note2", 0);

  new Tween (container_mc, "_alpha", Strong.easeOut, 50, 100, 0.5, true ");

  }

  thumb3._alpha = 50;

  thumb3.onRollOver = function() {}

  new Tween (thumb3, "_alpha", Strong.easeOut, 50, 100, 0.5, true ");

  }

  thumb3.onRollOut = function() {}

  new Tween (thumb3, "_alpha", Strong.easeOut, 100, 50, 0.5, true ");

  }

  thumb4._alpha = 50;

  thumb4.onRollOver = function() {}

  new Tween (thumb4, "_alpha", Strong.easeOut, 50, 100, 0.5, true ");

  }

  thumb4.onRollOut = function() {}

  new Tween (thumb4, "_alpha", Strong.easeOut, 100, 50, 0.5, true ");

  }

  thumb5._alpha = 50;

  thumb5.onRollOver = function() {}

  new Tween (thumb5, "_alpha", Strong.easeOut, 50, 100, 0.5, true ");

  }

  thumb5.onRollOut = function() {}

  new Tween (thumb5, "_alpha", Strong.easeOut, 100, 50, 0.5, true ");

  }

  thumb6._alpha = 50;

  thumb6.onRollOver = function() {}

  new Tween (thumb6, "_alpha", Strong.easeOut, 50, 100, 0.5, true ");

  }

  thumb6.onRollOut = function() {}

  new Tween (thumb6, "_alpha", Strong.easeOut, 100, 50, 0.5, true ");

  }

  do its _visible property false when his _alpha is 0 (and make _visible instead of it the reactivation).  You can elimate the active code.

• Problems with Acrobat and application manager

  I have creative cloud on OS 10.6.8.

  I had Acrobat X Pro installed and it was working fine until I tried to open it today. When it opened, I got a dialog box saying:

  "A problem has occurred to the license of this product. Restart your computer and restart the product.

  If this problem persists after restarting, contact Customer Support for further assistance and mention code error displayed at the bottom of this screen.

  ' Error: 131:4 '.

  I tried to reboot twice and it didn't fix it.

  I uninstalled Acrobat, thinking that I could reinstall everything using the Application Manager, but even if I uninstalled and deleted all the files from my drive, the application Manager shows that it is installed, so I can't even re - download and reinstall.

  Help, please. I really need to use it now.

  Never mind. I did a search for 'acrobat' on my computer, and apparently the uninstaller had left a few files. I deleted all the files associated with acrobat, restarted, and then the application manager allowed me to download.

  It's really squirrels, adobe. Thank you for taking an hour and a half of my life that I'll never come back.

• I need activate vista windows aero but disable them deleted on my computer and Desktop Manager on my own :(

  I need activate vista windows aero them but them deleted on my computer and Desktop Manager disable on mine :(

  Please see the following article with a Mr. fixit and other solutions for a missing aero theme:http://support.microsoft.com/kb/945000.

  This is an art. that addresses both the disabled and disabled aero Desktop Manager problem and a possible solution:http://support.microsoft.com/kb/934561.

  Here is another article on troubleshooting problems with Aero and Desktop Manager:http://www.mydigitallife.info/2006/12/17/get-and-enable-windows-vista-aero-glass-transparency-effect-and-desktop-windows-manager-dwm/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Smartphones big problem in my blackberry Desktop Manager 7

  Hello Mr President.

  I have problem with my blackberry Desktop Manager 7

  After I installed, I found languge as box does not understand a thing

  I have uninstall and install so many times and its same ebglish or Spanish is even too

  my system: windows 7 64-bit

  I wish to receive reply soon because I have problem in my phone, whatever i do update my phone

  Hello vmarjorie56

  Thank you for your question regarding the problem you are having with your BlackBerry Desktop Software installed.

  What is the full error message and when precisely it occurs?

  Thank you.

• problem with the windows Task Manager.

  Hello.i uses windows 7 64 bit and I have a problem with my windows task manager.i am still able to use the windows task manager but when it appears, the tab all lack .it s display only a program this running.i hope you can help solve this problem.thank you.

  To regain the tabs and information, double-click on the outside edge of the window.

• BlackBerry Smartphones PC and Desktop Manager cannot detect my 8520 phone

  My PC and Blackberry Desktop Manager do not detect my 8520 phone when connected to my PC.  I tried all the suggestions for example remove/replace battery and reinstall the desktop software. But when I look under Ports, in my device manager there are two entrances: -.

  V2 (Com3) RIM Virtual Serial Port and

  RIM Virtual Serial Port (Com4) v2

  Is there are two entrances, and this could be the source of my problem?

  I now have my PC and Desktop Manager recognize my phone.  It seems that one of my firewall settings were changed. [[Firewalls is sometimes more trouble than they're worth!]]

  Thanks to all who took the time to answer my question. :

• I have a problem with scrolling and typing on the computer.

  Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

  as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

  Hello

  Thanks for posting your question in the Microsoft community.

  I see that you have a hard time to work with the mouse.

  1. What is the brand and model of the mouse?
  2. The problem occurs on any program or when you perform a task in a particular program?

  Try these steps and see if that solves the problem of performance of your mouse.

  Method 1:

  You can check that the mouse buttons are set correct.

  Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 2:

  You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

  a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
  c. click on the Driver tab, and then click uninstall the driver.

  d. restart the computer and it will automatically re - install the drivers of.

  Note:

  You can also update mouse drivers by visiting the manufacturer's Web site.

  See this link for more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if you need help on this question or any question about Windows.

• Problem with Skype and Windows 8

  Received a new computer with Windows 8.  Skype came on the computer and worked great for a day.  Now it shows people I'm "unavailable" even if I'm registered.  When I make a call, it sounds just and rings and the person I call does not get notification.  Should I uninstall the Skype that came on the computer and download another version?  Any suggestions?  Please make simple answer - I'm NOT techie and I need Skype to work for my company!

  You use the Skype app?  If so try to install Skype to office and use it from the desktop.  The apps are a little more prone to disorder compared to the fuller program.

  How the desktop version of Skype on Windows 8?

  https://support.Skype.com/en/FAQ/FA12162/how-do-i-get-the-desktop-version-of-Skype-on-Windows-8

  You can also restore the system to use to return to happier times.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  See if the program can diagnose any problems with applications and correct.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Another third-party program may be causing a problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

  These options are also integrated to Windows 8.

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• problems with the adobe application manager

  I have problems with the adobe Application Manager.

  Please see the links below.

  • Does not open App | Wheels of progress turn continuously
  • Creative Cloud Desktop App taped blue spinning wheel after update.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Problem with Creative Cloud Desktop app for Windows 8.1 update

  Hi, I have updated my desktop and laptop to Windows 8.1 over the last day and have noticed a problem with the Cloud Desktop creative application.

  Some menu items when I right click on either the CC system tray icon, or click the menu settings in the interface of the application itself does not show.  I've included a screenshot of the problem.

  I tried to uninstall and reinstall the desktop application, but it did not work.  Any ideas?

  

  If you update to the current version of the creative cloud desktop application should allow you to solve this difficulty.  For more information, see creative cloud desktop has lack of text of point 8.1 of Windows - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-missing-text.html.

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.