problems with an earlier version

Similar Questions

• Firefox4 didn't transfer my identity safe for logons. Is there a way to replace Firefox4 with an earlier version that allows the secure identity?

  I use the secure identity with Explorer, and I was able to use it with an earlier version of Firefox that I had downloaded.

  You can download the previous version at this url:

  http://www.Mozilla.com/en-us/Firefox/all-older.html

  Use Add and remove programs control panel to uninstall FF4. Then reinstall FF36.

• Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Hi judithl34724699,

  If you want to convert Word files to PDF with the Adobe Reader application then it is possible with the service Pack of PDF. Try to use the service on the web: https://cloud.acrobat.com/convertpdf

  Also try to use a different file type.

  Thank you

  Abhishek

• Too many problems with the latest version of Lightroom

  Hi all

  I have too many problems with the latest version of Lightroom (CC 2015.2.1 1046594)

  In fact, the latest version of 3 or 4 were bad: instead of doing better, I always had more problems.

  So I would like to go back to a previous version of lightroom

  Adobe customar care, in Italy, is unnecessary:

  they can just to:

  -looking for answer on this forum

  -saying "you solve your problems just with the de-insall and re-install it.

  stop, no more...

  in this way they create me a lot fo iusses...

  I use the English version of the PS and LR, but they made me reinstall the Italian version of CC because it has been blocked

  the result was that CC does not recognize software, due to a different language version

  so, I contacted again Adobe Customer Care... they said "no problem, uninstall LR, delete these files and install this...

  I did and I let go 2 years to develop the parameters on the correction of the colors for my clients because they told me to remove a folder, I need!

  so, I ask you now if there is a way to return to a previous version of lightroom, any previous version...

  I never found better performance in more recent versions...

  I've always found, performance slower, more problems...

  personal idea: I do not understand why adobe are boicotting itself, but I think he do!

  Thanks to you all

  Hi ramontillo,

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• I have a problem with the new version of Photoshop CC 2015

  Hello

  I just installed the new version of Photoshop CC 2015. However I have proplem with this version. If I optimize the program, I will not be able to use all the tools, because everything is great, I don't have the problem with the old version.

  I hope for a solution...

  Go to Preferences > Interface > user interface scaling and see if 200% is checked.

  If so, uncheck the box and see if that fixes the problem.

• I have problems with the standalone version of Lightroom 6.

  I have a problem with Lightroom 6 - so much trouble that I'm currently impossible to use.

  (1.), I bought the standalone version of Lightroom 6 - CC No. I bought the disc, not a download.

  (2) I installed and used for months without any problem.

  (3) when I clicked on the icon on the desktop to open it - about three weeks ago, I got a message that I could buy (1) or (2) try it for 30 days. Of course, I couldn't choose one of these options because two of them would require me to pay for the program, either immediately, or within 30 days, if I wanted to continue to use it. If I deleted this message, Lightroom would not open. So, I was locked out Lightroom even though I had already paid for it.

  (4) given that I got the disc, I decided to reinstall Lightroom. This allowed me to use Lightroom again. I've been using this new facility without problem for several weeks; However, when I clicked on the icon of the office tonight to open Lightroom, I got the same message again: buy it or agree to a 30 day trial. So, I'm locked again.

  (5) I decided to install again. I managed to install the program on the disk; However, when I tried to open Lightroom, I received the message (not the exact wording): "you have installed Lightroom on computers too ' or maybe it was ' you used this serial number for facilities too - something along those lines." (I can't raise the message again, or I'll give you the exact wording). So now I'm completely locked.

  (6) before these challenges, I got Lightroom installed on my main desktop and on a laptop that I used when I travel. That's two facilities, and I installed twice on my desktop computer to try to circumvent the problems described above. However, I carefully watched my installed programs and there seems to have only a single installation of Lightroom 6 - no step three.

  (8.) I would like any suggestions to fix this mess.

  Thank you.

  Roger

  Hi Roger,

  My apologies for the trouble you've had to go through.

  I've updated your records and you should be able to use your license now.

  When you receive the message about the trial or a 30 day program, you should be able to choose the "Software license" option and activate using your key in order to to use without getting to re-setup.

  Concerning

  Claes

• Problem with the Desktop version, Tablet and phone. Help, please.

  I created a website in Muse. I created the Desktop version, Tablet and phone. But my problem is that, once I open my website on my tablet or phone it shows not always the correct form. Most of the time it's to show the offline version even if I am looking on my phone. What can I do?

  Hello

  I watched address phone and noticed 2 flaws.

  1 URL internationalchangepartners.com no redirects to internationalchangepartners.com/phone when I tried on the phone.

  Please do the following to solve this problem

  Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  2. now when I check link internationalchangepartners.com/phone I saw that the Menu options are linked with pages of the tablet.

  To over come this I suggest you to select hyperlinks with a lot of attention. Once you select the Menu item and add the hyperlink, select the option under the phone if you are available for the phone.

  Hyperlink has a separate list of the link for each structure. Look at the screenshot below.

  

  Once there 2 flaws were fixed there is no problem with the site.

  Concerning

  Vivek

• Problem with Lightroom RAW Version 4.4 converter file CR2

  I have the problem that my Lightroom Version 4.4 the RAW Format of my new camera (Canon EOS 1200) do not identify.

  The file is a CR2. How to get the RAW directly on my Lightroom Version Converter?

  Hi bjomk,

  Canon EOS 1200 photos are not supported in version 4 of Lightroom.

  You need at least version 5.4 access to raw images.

  For example, you can upgrade to a newer version of Lightroom or Adobe DNG Converter allows you to convert images to DNG and then work on these DNG in Lightroom.

  Article references: supported by Adobe Camera Raw devices

  Kind regards

  Claes

• Problem with the CS3 version of MPEG-4

  Since I have my own new device, I have a problem when I import video in CS3. When I did it, I start the little video and at the half, his early bug and after fews seconds, his black until the end. All the videos I have with my cam made with version cs3, but if I read with quicktime, it works well, so I think that the problem is not my cam.

  I found a solution, but it was to convert the video into a format to another, but I lose a lot of quality, so I want a better solution!

  Thank you very much in advance!

  Search Google for a converter and convert it to AVI DV MS type2 with 48 KHz/16-bit stereo PCM/WAV.

• I have a problem with the new version 5 of output is not compatible with the Google toolbar... and Google toolbar is important :(

  Please solve the problem of compatibility with the Google toolbar as soon as possible

  Google must update the program toolbar for Firefox 5.0.

  The toolbar 7.1.20110512W version works quite well in Firefox 5.0 using the add-on Compatibility Reporter. But not all features work 100%.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  http://GoogleSystem.blogspot.com/2011/06/enable-Google-toolbar-in-Firefox-5.html

  Google Labs is working on a version 8 GTB, but looks like he is not made for Firefox - just for Internet Explorer.
  
  http://www.Google.com/support/toolbar/bin/answer.py?hl=en & Answer = 1111588 #toolbar_info
  
  So, maybe Google will not support Firefox any longer. Maybe it's a gesture to force users of Google Toolbar on Google chrome, which I believe has all these built-in features.

• Problem with MacPro, early 2008 gel

  Help, please... I have a MacPro early 2008. I'm on Mac OS X Lion 10.7.5.

  Processor 2 x 2.8 GHz Quad - Core Intel Xeon

  Memory 8 GB 800 MHz DDR2 FB-DIMM

  ATI Radeon HD 2600 XT 256 MB graphics

  The question I have is this: my Mac freezes market throughout the day. It seems to happen after that, I was on the internet, especially if I use FireFox, (43.0.4) and download anything. I downloaded Photoshop backgrounds, brushes, photo galleries, fonts, etc.

  I had two things happen that could have caused this:

  ) I tried some software of compression of pdf via the internet, and it would break my system after some pressure.

  (2.) the battery backup on my Mac doesn't have a couple of times and has my Mac completely down. It is a professional unit of size, so I guess that something is wrong with her.

  Before my Mac freezes, Illustrator starts responding very slowly. Finally, it crashes and I have to make a hard stop at the CPU. Sometimes my monitors (double cinema) will stop as well.

  Once I have restart the Mac, then creative cloud will launch and ask me to connect even though I don't have it running before the accident. Generally the crash will also Suitcase Fusion 4 to fail, and I have to rebuild the base FM.

  Someone suggested that I have buy Bitdefender and see if I picked up some malware. I only did this for the moment. I'm not running any security software other than keep my security Mac update through software updates.

  I hope that someone has ideas on what could be causing these issues, I can try and how to solve problems.

  Thank you very much!

  Sheryl

  -Probably the graphics card is a failure. What happens to 2600 XT aftertime.

  -You can try to open the cover side and ensuring that fans turn freely and are free of dust. Blow dust if necessary.

  -In addition, install an app like Mac Fan Control fan speed and temperature to see if something is overheating because this may cause monitoring freezes.

  -Also

  • Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of a start-up.

• Problems with the latest version of Flash Player

  I downloaded and installed the latest version of Adobe Flash player. ach time (several times) it said it was successful, but when I need to use it, I get invited to 'Install flash player', I have Windows 7 and use Internet Explorer. Help! Please, I beg you.

  Hello

  Check with Support Adobe and their forums.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ------------------------------------------

  How to uninstall the Adobe Flash Player plug-in and ActiveX control - download utility uninstall
  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Troubleshoot Flash Player installation | Windows
  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Or

  Download Revo Uninstaller - free Version - and use it to uninstall Flash
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Reset

  Now try Flash:

  Download Flash Player (do not install the Google toolbar unless you really want to).

  http://get.Adobe.com/flashplayer/

  or:

  Test of Shockwave and Flash players
  http://www.Adobe.com/Shockwave/welcome/

  http://www.Adobe.com/software/Flash/about/

  ---------------------------

  If there are still problems when running Flash Player:

  Troubleshooting drive stabiility and performance
  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Flash Player Support Forums<-- more="" knowledgeable="" flash="" player="" help="" available="">
  http://forums.Adobe.com/community/webplayers/flash_player

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with the latest version of Adobe Illustrator

  Dear Sir / Madam

  After the update to the latest version of Adobe Illustrator, I am facing the following problem:

  In the latest versions, that we used to push the button around the element (thickness), change the value of the thickness. The value that is used to change the selected value (. 25,. 5... etc.). But now if we press (up arrow) button the jump from 1,000 to 1000,000 thickness value. At the same time if write us the value of keyboard it will probably work.

  I attached you a picture to show you what happens with me when I press (up arrow) button.

  

  

  

  The problem has been resolved. Avast anti-virus out problems cause. Remove the Avast software problems are installed.

• Problem with the compatible version of line lock tables

  I tested the effect of locking in the tables in activated version to assess restrictions workspace manager to update the records in different workspaces and I met a locking issue where I can't seem to update different registers of the same table in different sessions if these same records have already been updated and committed in a different workspace.

  I run the tests on 11.2.0.3.  I have ROW_LEVEL_LOCKING worth IT.

  Here's a simple test case (I have many other test cases that are not as well, but understand why it is a problem of blocking will help me understand the results of others my test case):

  -Alter tablespace names in accordance with the requirements

  create table t1 (id varchar2 (36) not null, name varchar2 (50) not null) tablespace XXX;

  ALTER table t1 add the key primary t1_pk (id) of constraint using index tablespace XXX;

  exec ('LIVE') dbms_wm.gotoworkspace;

  insert into t1 values ('1 ', 'name1');

  insert into t1 values ('2 ', 'name2');

  insert into t1 values ('3 ', 'name3');

  commit;

  exec dbms_wm.enableversioning ('t1');

  exec ('LIVE') dbms_wm.gotoworkspace;

  exec dbms_wm.createworkspace ('TESTWSM1');

  exec dbms_wm.gotoworkspace ('TESTWSM1');

  -Update 2 files in a workspace not LIVING for the update later in different workspaces

  Update t1 set name = name | ' changed ' where id in ('1 ', ' 2');

  commit;

  quit smoking;

  -Now in a separate session (called session 1 for this example), run the following without commit the changes:

  exec ('LIVE') dbms_wm.gotoworkspace;

  Update t1 set name = 'modified' where id = '1';

  -Now in another session (session 2) update a different record in the same table.  The update below is blocked waiting on the transaction in the session 1 to perform (by commit / rollback):

  exec ('LIVE') dbms_wm.gotoworkspace;

  Update t1 set name = 'modified' where id = '2';

  I am surprised, recordings of the different IDS cannot be updated in different sessions which is why is session 1 blocking the update of the 2 folder that is not being updated anywhere else.  I tried this using different workspaces not LIVING with similar results.  I tried to change the properties of the table for example, initrans with and always get a lock.  Changes made to the properties of the table are correctly propagated to _LT tables but not all tables in handler related workspace created for table T1 that precedes.  I don't know if that's the problem.

  Note an example of the query Manager space background likely to create the lock is something like:

  UPDATE TESTWSM. T1_LT SET LTLOCK = WMSYS.LT_CTX_PKG. CHECKNGETLOCK (: B6, LTLOCK, NEXTVER,: B3, 0, 'UPDATE', VERSION, DELSTATUS,: B5), NEXTVER = WMSYS.LT_CTX_PKG. GETNEXTVER (NEXTVER,: B4, VERSION,: B3: B2, 683) WHERE ROWID =: B1

  Any help with this will be appreciated.  Thanks in advance.

  Hello

  The reason for the block is actually the same as above.  The splits is registered at the level of the version/savepoint, not necessarily just the workspace.  In your example, workspaces TESTWSM1 and TESTWSM2 have a single version and the LIVE workspace has 3 versions.  A new version is always implicitly created during a CreateWorkspace operation if the most RECENT/current version has modified data.  The lines for the id = "1" and id = "2" are changed in each workspace to the child and before creating a workspace.  However, since the id = "3" LIVE online has changed after the creation of TESTWSM1, it is in a different version of those other 2 rows.  So when the updates for the id = "1" and id = "2" are executed, the line is attempted to be divided between TESTWSM1, TESTWSM2 and the latest version of LIVE.  No other line has been updated with this combination so we try to introduce a set of lines in the metadata table.  As this happens multiple sessions at the same time, one of them is obliged to block until the other transaction issues a commit or rollback.

  It is not a way to avoid these LMD.  The lock is acquired in this case is a short-lived transaction lock and they are required for the correct rows be returned for a particular workspace.

  Kind regards

  Ben

• I installed the latest version of Firefox and it does not connect to any Web site. I had no problem with the previous version, I used.

  Can not connect to any Web site.

  texhusky Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update