Research of waveform points

Similar Questions

• The research of data points in a cluster

  Hello.

  I'm using LabVIEW 2013 to myRIO. IM facing a problem with the implementation of a few things with the clusters.

  Problem statement: coordinated map recorded for a GPS on a map and the use of the cursor functionality to check the value of the various sensors on different parts of the track.

  I was able to map the contact information stored on a card in LabVIEW. I create an array of the coordinates, to group and then move them to an XY Chart. Cursor has also been implemented. I click on the map and drag my mouse and it takes me to different coordinates.

  What I can't do, is show other data senors for the coordinates x, Y.

  My plan is to consolidate all the data from sensors in a cluster, and then try to find the cluster for the necessary points of X, Y.

  How a search within a cluster by specifying only X, Y

  for example: I give to X, Y and I get the value of all the sensors for this pair x, Y?

  Thank you

  
  

• Need to access info "header / properties" and the use of a 'peek-a-boo' feature that allows an opening not assigned an e-mail message. BOTH are necessary.

  When the list of "incoming mail is received, a few times an e-mail will have a familiar name, BUT the message is NOT the person I know.» A header would reveal which is the familiar name of MASKING. It is located on the right click of an email entering under "properties.", for those who use the Windows Mail service. Upon activation, two panels are available: "general", line information base; and the jury of "Details". [email protected]

    Here is the "Details" on your recent request:
  

  Return-Path: < 8fd.10.Ragingmt =rochester.rr.com@mxsp4.email-od.com>
  Received: from dnvrco-pub-iedge - vip.email.rr.com ([107.14.70.244])

           by dnvrco-fep24.email.rr.com
           (InterMail vM.8.04.01.13 201-2343-100-167-20131028) with ESMTP
           id <20150527165815.TQBS12014.dnvrco-fep24.email.rr.com@dnvrco-pub-iedge-vip.email.rr.com>
           for <[email protected]>; Wed, 27 May 2015 16:58:15 +0000
  

  Return-Path: < 8fd.10.Ragingmt =rochester.rr.com@mxsp4.email-od.com>
  Received: from [64.151.119.54] (helo [64.151.119.54:45118] =mail24.smtprelayserver.com)
  by dnvrco-iedge04 (envelope-from < 8fd.10.Ragingmt =rochester.rr.com@mxsp4.email-od.com>)
  (ecelerity 3.5.0.35861 r (Momo - dev:tip)) with ESMTP)
  ID 05/42-22770-6A7F5655; Wednesday May 27, 2015 16:58:15 + 0000
  DKIM signature: v = 1; a = rsa-sha1; d =email - od.com; i=@email-od.com; s = dkim;
  c = relaxed/relaxed; q = txt/dns; t = 1432745904; x = 1435337904;
  h = content-type: mime-version: subject: to: to: date: message-id: reply - to;
  BH = BorokUNlliKkKGt/h0t9J5QZRXM =;
  b = ivSHJkJVgtIuuPbdKelm8wrP9MTDBOfWi38tURaeWYyE7irIYrzg8PjdIXA/r9B3Uc8l1gJJ9blRBU2jcN + jKV4C2 + / 5tSrQSrfiqa9l5xBx81Fm8Winq6uvCxyTCUwioUwJ21eUR7FDAXlDmcg7fbRBoG2b4 + f0CvQLBrdPNxU =
  X-wire-Info: OGZkLjEyLjhhMDAwMDA3NmJmNzIzLlJhZ2luZ210PXJvY2hlc3Rlci5yci5jb20 =
  Received: from r2.us - West - 2A .aws .in .socketlabs .com ([54.186.58.227]) by mail30.email - od.com
  with ESMTP; Wednesday, may 27, 2015 12:58:23-0400
  Received: from support3.webapp.phx1.mozilla.com ([63.245.216.223]), of r2.us - West - 2A .aws .in .socketlabs .com
  with ESMTP; Wednesday, may 27, 2015 12:58:14-0400
  Content-Type: multipart/alternative;

    I do NOT have this option on the right-clicked menu.
  

    Yes, I have been fooled, BUT, with a name of an extended family member, who questions such?  However, the message came from an unknown party, pushing some product from Oprah.   I check now.
  

    There are also e-mails I may NOT wish to indicate that I have "read" them via the formal opening process.  I call this the "peek-a-boo" method of opening an e-mail, as it is NOT a formal opening, per my research.  The point is that NOT all you see on the screen IS what you ARE seeing.  Thus the old saying: "Seeing IS believing.", is NOT true.   This is a more current peeking process, an advancement on the old "300 watt bulb behind the envelope" method of finding out contents withOUT opening the letter.  This applies to a sender I am familiar with BUT, the current topic is NOT of interest to me.   Thus, I can use the "Delete" function with complete satisfaction.
  

    Therefore I wish to know HOW I can gain these two features on THUNDER BIRD e-mails?
  

  Thomas J. Baglin
  [email protected]
  27/05/2015

  R.M. said

  Thank you, you, Matt.
  Regarding the "peek-a-boo," about 15 years ago, it was somewhat revealed the Web that some shippers had the ability to detect IF you had opened their missive.

  This is handled by the Web beacons. Thunderbird blocks remote images by default. Web beacons work only if you enable the remote images in specific email.

  From THIS time, it is the GOVERNMENT that has the ability to detect if you open all or part of your receipts "Entrants".

  Interesting point of view, but not quite corr4ect. f they have access to a mail server IMAP "could" determine the status of mail on this server. In the case of POP e-mail that could determine if it has been downloaded. While I do not trust of Government oversight. About the only time where they would do that would be when they are already studying you as an individual. It's a slow late then.

  So, WHY Windows Mail offers this function and the T-bird, NO mail?

  I played with Visual basic using integrated Internet Explorer about 15 years ago and it was a simple toggle to change the display of the HTML displayed in the source. So I would say it is in windows mail, because he was already in Internet explore and it made for a very simple to implement the functionality. Just expose the existing functionality. After all the composition and rendering in Windows mail used Internet explorer.

  Although the header can help tremendously, , what I SEE is NOT NECESSARILY WHAT THAT REALLY is the content of the e-letter.
  

  This is a feature of Thunderbird. It uses the display names from your address book on incoming mail. You can disable it in the menu (alt + T) tools > options > advanced > reading and posting.

  If the follow-up can be done via the 'Key STROKE' method, and YOU do NOT know of it, then a "peek-a-boo" is useful to have, huh?

  Keyloggers are all also able to capture screens and clicks. If your number more ahead.

  It makes me feel, I have a FEW C-O-N-T-R-O-L that I CHOSE to read, and what I based on the content and subject.

  Seriously. encryption of e-mails with s/mime and free email certificates will do more to protect your mail that any kind of fake check before you read. Most of the people may face apparently not having a certificate of personal mail to encrypt their mail and like most internet technologies, we get the lowest common denominator. This is the plain text that scours the internet to an ordinary human-readable text.

  Please when using these forums not your text indent. This is what makes it become very difficult to read and not wrap. I don't know that that is how you were taught in school. I learned the same thing. But it must comply with the requirements of the opportunity.

• Simple Script Execution: Days and only using 15% of the CPU power

  Dear community,

  I have a data file (.tdm) with 17 channels of waveform point each containing 13742499 data. I want to delete all the data points that are not actual load points. I have build a canal ("LoadTrigger") that is a trigger for points of interest. With the following script, I tried to erase the im not interested datapoints:

  Dim RowCount

  Number of lines = 1 to GlobalChnLength

  ChnVal if (RowCount, "/ LoadTrigger") = 0 THEN

  Call the DataBLDel ("1-17 ', RowCount, 1" ")

  End If

  Next

  The script is now running for more than 20 hours with no result. Can someone please tell me if I am wrong in my script, or if there is a way to make it faster?

  In addition, I wonder why DIADEM uses no more than my cpu power? As you can see in the photo attached DIADEM mainly use a carrot and never more than 15% of the CPU.

  

  Best regards and hoping answers of construcitve!

  If you try to delete rows based on conditions, you can use code like this:

  Option Explicit
  
  CreateExample
  
  "Make sure that the correct group is active.
  
  data. Root.ChannelGroups (1). Activate
  
  ' chncalculate allows you to set values that match a NOVALUE condition
  
  Call chncalculate ("Ch (1) = Ch (1) + CTNV (0 = Ch (1))")
  
  'Delete the lines that contain a NOVALUE in channels '.
  
  Call ChnNovHandle ("[1] / [1]", "" [1] / [2]'-' [1] / [3]'","Delete","XY", 1,0, 0)
  Sub CreateExample()
  
    data. Root.Clear
  
    Dim g: g = given game. Root.ChannelGroups.Add ("group")
  
    Dim c1: set c1 = g.Channels.Add ("c1", DataTypeFloat64)
  
    Dim c2: set c2 = g.Channels.Add ("c2", DataTypeFloat64)
  
    Dim c3: set c3 = g.Channels.Add ("c3", DataTypeFloat64)
  
    I have Sun: for i = 1 to 100
  
      C1 (i) = I mod 2
  
      C2 (i) = I have
  
      C3 (i) = i * 0.00001
  
    Next
  
  EndSub

  that will remove all lines that contain a 0 in the first round.

  

  will be converted to

  

• Serching in WMP 11 blocks computer and several programs are incompatible

  When playing a video (no matter the file type), research from one point to another very quickly in order to find a moment special, I want to see, blocking the player. This only happens with videos.

  Here are the technical information of the on menu.

  https://SkyDrive.live.com/redir.aspx?CID=fe0f3e545fb9e34e&RESID=FE0F3E545FB9E34E! 312 & Thierry = FE0F3E545FB9E34E! 200 & authkey =! ANyLfuP8JQbZC8I

  information from dxdiag:

  https://SkyDrive.live.com/redir.aspx?CID=fe0f3e545fb9e34e&RESID=FE0F3E545FB9E34E! 313 & Thierry = FE0F3E545FB9E34E! 200 & authkey =! AP9C4rLX1Ls5xwY

  There are known incompatibilities?

  This is the case with the files of more than 600 MB, the smaller files are ok.

  I tried the sfc command and the boot, but it does not help that much.

  Hello

  1. What is the source of the video files that you play?

  2. you get any error message?

  3. this happens with any other media player installed on your computer?

  4. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Try to reduce the hardware on the graphics card acceleration and check if it works very well.

  (a) click Start, click Control Panel, click appearance and personalization, click personalization, click display settings, and then click on Advanced settings.

  (b) click on the Troubleshooting tab, and then click change settings. If you are prompted for an administrator password or for confirmation, type the password, or provide confirmation.

  (c) move the hardware acceleration slider until it is one notch to the right of None. It is the basis of acceleration.

  (d) click OK twice , and then close the window.

  If the problem is resolved when you set the cursor of None or Basicgraphic hardware acceleration, contact your hardware manufacturer to find out how to get and install the latest video driver for your video card.

  If you have already installed the latest video driver for your video adapter and you continue to experience graphic issues with the Graphics Hardware Acceleration slider sand Full. However, move the graphics acceleration hardware cursor mouse a notch to the left until the issue no longer occurs.

  Method 2:

  Follow the steps mentioned below.

  a. Click Start.

  b in the start search box type cmd and press to enter.

  c. Type regsvr32 msmpeg2adec.dll and press enter

  d. Type regsvr32 msmpeg2adec.dll and press enter

  e. restart the computer.

  Also check out the links below. http://support.Microsoft.com/mats/video_freezes_or_crashes

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• . MSO

  Cannot open this file. All the research that I point to my registry which is apparently full of errors!

  Many websites like Speedy, Unilube and etc., indicates that I can get a completely Free Download, which is true, but when I chose the icon to correct these errors, they force you to pay!  How to fool!

  There be some Microsoft or another program available free of charge to fix my registry. Once I found it, I will post it here!

  Take a look at this:

  Mso file extension
  http://www.downloadatoz.com/file-extensions/mso-file-extension.html

  t-4-2

• Selection of Windows Explorer F3 Search options?

  After you select one of my hard drives in Windows Explorer, when I then search of F3, the results I get are often very confused (many reported files contain the search string to ASCII in the name of the file, or the contents of the file).

  Is there a way to control/tell the search engine if I want that he

  (a) matching in the only file names?

  (b) searching for matches in the content of the file only?

  (c) search for matches in the filenames or content of this file?

  It's particularly frustrating when I'm looking for a specific file, including a file extension. For example, a F3 Search for "hal.dll" gives a bunch of files, not just the one and only I'm looking for the "hal.dll" file. It's like the F3 research addresses the 'point' which separates it from the file name of the file as an OR logical operator extension.

  You can try using different filters, honestly, I've never had problems finding what I want using Windows Search.

  For example, you could search for "hal.dll" in one of the following ways:

  Name: = Hal.dll

  -The equal sign after the filter name: means Windows will only look for exact matches

  name: hal ext:dll

  -This would find all the files where the string hal appears in file name with extension dll

  Read more:

  http://www.SevenForums.com/tutorials/286043-search-find-more-filters-operators.html

  http://Windows.Microsoft.com/en-HK/Windows7/advanced-tips-for-searching-in-Windows

• Remove the Runtime Sentinel drivers

  While trying to upgrade to 8.1 Windows, I got a message for remove Runtime Sentinel drivers.  To the best of my knowledge, I have no sentinels devices on my computer and there is no sentry program to remove.  However, the message persists.

  Research online all point to drivers Sentinel HASP that I've not heard of, so I can only conclude that runtime drivers are embedded in other software I might remove the problem if I knew what it was.  I tried running the removal of the command-line on the web, but nothing was found on my PC.

  Because I can't find Sentinel devices on my computer, I backed up the registry and then searched and deleted all reference to the "sentinels" but I met a couple of keys that cannot be eliminated even when I try to take ownership.  They are located in:

  HKEY_LOCAL_MACHINE/SOFTWARE/MICROSOFT/WINDOWS NT / CURRENT VERSION/Perflib/009.

  The second is: HKEY_LOCAL_MACHINE/SOFTWARE/MICROSOFT/WINDOWS NT / CURRENT VERSION / Perflib / CurrentLanguage.

  I tried to change the property to the top of the tree of the registry, but the changes are not permitted for these keys.  I don't know how the keys correspond to the sentinels as they appear to be associated with a 'meter', but they are identified as the key when I search the register "Sentinel."

  Has anyone else encountered this problem and solved?  If so, how?

  Sentinel is a software license that can be embedded in other programs. I read here http://superuser.com/a/643084 about it. Someone said that if you have installed Lightworks, you might have this problem. I went the Sentinal website http://www.safenet-inc.com/sentineldownloads/ and installed the drivers from the GUI. Then I uninstalled them and restarted. It seems to have worked, and will continue the installation 8.1.

• Access denied by Security page check

  Hi all

  We have an existing application, in which we have permission as "Admin" plans.

  The project has been configured using LDAP process, if a particular user needs to access application, the user must be included in the group "Admin".

  If a particular user connects to the application and it doesn't have access to the application, and then we see a message like "Access denied by Security page check" with the logo of the application.

  When I had done some research on this point, on a page under the Security tab, they have selected these options as attributes

  -> Admin authorisation schemes

  Authentication-> Page requires authentication

  Deep Linking-> default Application

  Protection of the page-> Unrestricted

  Auto-complete entry form-> in the

  Hide browser-> default Application

  
  

  Now, our precision is

  
  

  -Where and how the message "Access denied by Security page check" exists.

  - And also, we could see our poster with the message business logo.

  
  

  The problem is

  
  

  -Same steps as I did followed and created a new application under the same workspace, with a diagram of different authorization for this application
  

  -Now if the user is not that band I see the message like "Access denied by Security page check", but no application logo is displayed.

  -Where I'm missing, according to my hypothesis, there should be a model of error, which may re - runs on the screen to display this message with logo.

  
  

  Can someone help me on this please?

  
  

  Version of the apex - 4.1.2

  IE-10

  Database - 11.1.2

  
  

  Kind regards

  Sruthitamiri
  

  
  

  
  

  Sruthi Tamiri wrote:

  The problem is

  -Same steps as I did followed and created a new application under the same workspace, with a diagram of different authorization for this application

  -Now if the user is not that band I see the message like "Access denied by Security page check", but no application logo is displayed.

  -Where I'm missing, according to my hypothesis, there should be a model of error, which may re - runs on the screen to display this message with logo.

  for who are going to Shared Component > themes > Select theme >

  At the corner of the sidebar on the right, there is option to change theme XX,

  Check what is the error Page template assigned to the error Page and simply change as for appropriating the model Page.

• Subject: Speed video rendering and export in Adobe Premiere CC 2014

  I did some research on this point - and I've read about the different ways to do it - but at the end of the day... my videos still take some time to export (10-minute video will take 30 to 40 minutes to export)

  I recently bought a new MacBook Pro with a 2.5 Quad core i7 processor... 16 GB of ram and an AMD Radeon r9 M370x 2 GB video card.

  Videos should be much faster with this alone, but they go to a slower speed. I know people who have similar videos, treatment within 4-5 minutes.

  Now, the video is filmed in 1980 x 1080, I think... I would like to export to 1280 x 720... There is not much I can do...

  I tried to lower the speed of transmission of about 1, which decreases the size of the spectacular video... and I've even limited to one pass.

  I don't want to sacrifice the extreme video quality to win 2 minutes of processing time (down from 40 minutes to 38 minutes)

  What can I do to speed up rendering and exporting in the sequence settings?

  File > project settings > general.

  Also in the lower right corner of the Adobe Media Encoder queue Panel.

• Change the behavior of the fields QD customer portal

  When you connect a call via the customer portal interface (/ ServiceManager.aspx? lite) I would easily change the eay work Service and Config point QDs.

  I need them to search against the TITLE field, rather than the REF field and to find with all THE Services/CIs rather than with YOUR Service/GCS.

  Also on the review screen to call how you reference given on the ground of an Extension field rather than a kernel call Table fields.

  Thanks for you help in advance. V9.1.3

  Hi Dave,.

  We have portal application registration form with field Service QD included. And I made the same decision: it is much more convenient for the search service by its title and not by reference. The behavior can easily be changed by changing the query TABLE SERVICE_QDSearchResults:

  [SERVICE_NAME AND s.ASSET_REF LIKE: uSERVICE_NAME]

  must be changed to

  [SERVICE_NAME AND s.TITLE LIKE: uSERVICE_NAME]

  I believe you can change the behavior of field research of Config point QD (check CMDB_QDSearchResults TABLE and ASSET_QDSearchResults TABLEqueries) as well.

  To make extension of field reference use the syntax [EXTFLDV_500xxx] ([EXTFLDV_500xxx #EXTPROFILE500yy] for the profile field). Where 500xxx ir SU_FIELD reference number field.

  You should be able to add a field to the form review call using the designer.

  Regs

  Gytis

• Scripts for a novice - running DPM scripts on a calendar

  I am woking on a new facility with 5.1 ESXi and VCenter 5 running on the virtula machine.  I would use DPM but bring the cluster to pior fully operational at the beginning of the working day.  I found the reference for scripts that I downloaded.

  What I can't understand is to run at a scheduled time.  Most of my research seems to point to the installation and configuration of vMA in order to have the ability to import these scripts and install them on a cron job.

  This seems to be a bit of work to turn the 2 scripts.  My question is "is there another way to run scripts against the vCenter device without get job vMA?  If so, how? »

  Any help would be appreciated.

  If you want to disable DMP before the start of your work day, you are able to configure tasks scheduled in vcenter natively to achieve this without resorting to additional scripts.

  The task that you will need the installation is "change the cluster power settings.

• Problem with VCB does not

  Hello-

  I using VCB 1.5 update 2 to make backups of a few virtual machines and until I upgraded my hosts 4.1 update 1 (8.3.7 build 381511) and eventually my VM to the new VM tools things worked well.  All my VMs running Windows 2008 R2.

  Once I have updated to the latest VMTools, I started getting the "error: cannot open the disk: NBD_ERR_GENERIC" error.  Research on it points to disable "disc. EnableUUID', which does not, but its my understanding is that disables application Quiesce, I need because of servers running a database.

  As I troubleshoot-made the question, I found if I rolled back the version of VMTools back to the latest version of the 4.0 tools (4.0.0 build 398348), VCB starts to work again with 'the drive. EnableUUID' set to True when running on the host computer 4.1 (just shouted at me that my version of the tools is outdated).

  Are there other work autour, I have not yet found this or I'm stuck running the old version of VMTools until a later version to test?

  Thank you!

  Support for VCB will disappear in favor of the storage API. Rather than wait to see if there is a difficulty, I would start by looking at another way to save. Many backup products have added support to use the API. If you have a license for this I also glanced at the VDR unit. http://VMware.com/go/data-recovery

• Sync will not work with .mov + .mxf?

  I regularly blocking shoots where I use a Canon XF305 which records .mxf files and a Panasonic HPX - 250 that records .mov files. For some reason, I am unable to sync the two. They have very clear signal, and I tried this about 20 times with twenty different pairs of clips. Synchronize tracks and then said: "cannot find the audio sync point." I can clearly see a lot of very obvious sync on the waveform points, so I know this isn't really the issue. Part of the reason why I upgraded to PP - CC was for this feature, it would be a huge timesaver for me.

  Any ideas?

  Thank you!

  Hey Kevin,

  Just solved my problem (finally). It was user error! I was selecting the wrong number. I feel a little silly for missing. Well!

  Thank you

  Johnathan

• full text for the attachment

  Hi all
  
  I use ecm11g, after the addition of attachments when content (content actions-> addiattachements), I found the full text search does not work for the attachment, which configuration should I change to make the full-text search works for the attachment?
  
  Best regards

  862182 wrote:
  Hello Kent,

  I do not understand the metadata model, you hear implement attachments using metadata? in other words, to implement the function of fixing by ourselves?

  Where the doc relating to associated content?

  Could you please give me an extra explanation ", which requires that the content is inside of the content server and attachments by definition are not"?

  Best regards

  (1) people often create a relationship that can be managed on the editorial plan through a custom metadata field. superuser ethical field might contain a ContentID for another article. Research and other points of view could be made to display all documents related to... is the idea?

  (2) I think it's the best, you will find http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/integrator/admin_related_content_10en.pdf

  (3) active elements in indexed released etc. are considered as 'managed content elements' revision history metadata etc are stored in files in arch/weblayout and DB. There are some files that are used by the University Complutense of MADRID who are not managed no content in this sense - attachments are a good example. They have no their own metadata are not searchable independently and in fact can be found regarding the parent content item. This is because the history of zip rendition managem, component of the NTS is for other renditions of an image where the meta/security etc are all the woud even, but it probably be just another resolution or file format.

  Tim