problems with different Simmulators, garbage entry showing
I am new to BB dev, hope I can get help on this one.
I have an application that runs on the BB, on following simulators perfectly
8330, 8800 and 9000, although it works fine, but unexpected behavior is observed for the rest of the simulators 8100, 9530 (beta and RC)
the intended behavior of the UN's Comin' from the following code, please advise, also note that she works well the way planned for the sims 3 mentioned.
Scenario:
We have a screen that has fields of text custom (up to BasicEditFields), I made read-only by implementing the KeyChar() and store the key in the space with the field, please note that we are not change the text entered in the car on the screen area.
I have written sepratly ChangeField listener in another class that implements the screen and it registered ias a listener.
Normal to put then observed is : when I press any key on the field read-only, the key is stored in a reserved space and is later read back another part in the app how ever the field it itself shows no key that was used earlier.
Abnormal behavior being observed on mentioned simulators: when I press any input he starts to repeat the last word concatinated as well as entry and this thing keeps going
Concerns:
1 key tank never is called for the simulators showing abnormal behavior
2. I don't nodify not the field test, but I always find myself with entry of garbage.
3. the field exchange is directly called with past in the keychar.
IM also concerned that the code is not wrong because it works the right way for some simulators, any post on this one would be appreciated,
It was a great escape, in addition, I would like to wright down the solution that worked for me.
"I actually used the"
TextField.NO_COMPLEX_INPUT
"
This made p [possible to go to multi tap and apparently the flow and demand is on the right track.]
Thank you
Tags: BlackBerry Developers
Similar Questions
-
Problems with reset toggle buttons that show/hide captions
I have a problem with the buttons toggle that I use to show/hide a number of legends about a single slide of the reset. The rocker works very well on the first button when I click on and off to show or hide a legend. A simple click on and watch legend. One click off the coast and the legend disappears. However, if I leave a legend that is displayed and click on other buttons to show/hide the other legends, they do not show or hide in a single click. They require two clicks. It seems that something continues the read head after that first toggle is used until there is a second click. The same thing happens if I reset to enter action. If I click on a caption and leave it in place and move to another slide, it disappears when I re - get this initial slide. However, it requires two clicks, not one alone, to display the legend. I find it very strange; I learned most of my techniques from the Lilybiri blog, but this problem does not occur on his examples. I think I'm missing something obvious, but may not know what it is. Any help is very appreciated.
Yes, I use Cp6. What I wanted to say about re-use, is that I have different scenarios where a similar script could be used, if your suggestion of a model is a good. My original intention was to write it in a txt for reference. Thank you very much for all your suggestions and links. I'll keep you posted.
-
Problems with different e-mail addresses and the different Apple ID
Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.
First a primer on my Apple ID
***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).
***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)
***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)
***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.
I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.
What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).
An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.
So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.
Best regards
Philippe
Hi phillla,
Thanks for all the details with your accounts.
Can be difficult to have more than one Apple with several e-mails all mixed together. If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.
The analysis of what you seem to have however...
Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.
*@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.
You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own. As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.
You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address. You have a relief attached to this ID e-mail? This is the email that would be used to recover. You receive your check or reset email - Apple Support
Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well. Then follow the link above to get access to *@losmail.no and control so that you can rename it.
Best regards.
-
Problem with the drive of entry
Hello
I have a problem with the connections of socket on blackberry.
I send a command to my server and it will answer me with something like
WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss
SC = (SocketConnection)
Connector.Open ("socket://fes.ngv-group.com:5080; deviceside = true");
sc.setSocketOption (SocketConnection.KEEPALIVE, 5);
is = sc.openInputStream ();
OS = sc.openOutputStream ();
OS. Write (Protocol.doVersion (UID). GetBytes());
OS. Write (Protocol.doLogin (UID). GetBytes());
int bytesAvailable = is.available ();<----returns a="" value="" of="">----returns>
Char input [] = new char [bytesAvailable];
for (int i = 0; i)< bytesavailable;="" ++i="" )="">
input [i] = (char) is.read ();
};However my contribution [i] array only contains v.
Why is - this is.available line () returns 0?
How to read in the range full of WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss in my input array
I agree that treatment work should you find. I suspect that you have a coding bug. Take a look at the folloing code. The result was what I expected:
test
t
e
s
tByte [] testBytes = new byte [] {(byte) 0 x 74, (byte) 0 x 65, (byte) 0 73, (byte) 0 x 74 x};
String testString = new String (testBytes);
System.out.println (testString);
Char [] testChars = testString.toCharArray ();
for (int i = 0; i)< testchars.length;="" i++="" )="">
System.out.println (testChars [i]);
} -
Strange problem with HorizontalFieldManager - it does not show on real device bitmap
I have a rather strange problem with the HorizontalFieldManager on my Blackberry 8820, which I did not on the Simulator, or done other blackberries that I tried to install my game.
The problem is that bitmaps that I add, do not appear on the actual device, as in the images below. The code is provided below as well. No idea how to debug, or resolve is appreciated.
Here's what I see on Simulator and some devices
Here's what I see on the real blackberry:
Code:
......
OK, I found the solution - the problem is that there seems to be a bug where you can't put more fields button radio on a horizontal layout manager with 4.2.2.x.
The solution is to extend the RadioButtonField field and replace the positioning method:
RadioButtonField radioField = new RadioButtonHack ("", textureGroup, isSelected);
SerializableAttribute public class RadioButtonHack extends RadioButtonField {}
public RadioButtonHack() {}
Super();
}public RadioButtonHack (String label, group RadioButtonGroup,
Boolean selected, long style) {}
Super (label, group, selected, style);
}public RadioButtonHack (String label, group RadioButtonGroup,
Boolean selected) {}
Super (label, selected group);
}public RadioButtonHack (label As String) {}
Super (label);
}Protected Sub layout (int width, int height) {}
int temp = this.getPreferredWidth ();
setExtent (time, height);
Super.Layout (time, height);
}}
-
Problem with different ASM disaster recovery start - new
Hello together,
I had an old net here about it but now will not solve the problem with the points in the old thread. Here's the old: https://community.oracle.com/thread/3608049?start=0 & tstart = 0
I'm doing a disaster recovery with the 'apex11A' on a new server database, which has an another ASM starts. The old man starts is '+ DGA112_1' and '+ FRA112_1', newcomers are called '+ DATA_QUM169' and '+ FRA_QUM169 '. I changed the settings in the spfile restored by writing in a pfile file and creating the spfile from pfile.
I tried in several ways. First lay the new ASM with RMAN to the course:
run { SET NEWNAME FOR DATABASE TO '+DATA_QUM169'; restore database until LOGSEQ 24286; switch datafile all; switch tempfile all; recover database until LOGSEQ 24286; }
Then I tried it in RMAN by defining the new ASM for each data file:
run { SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169'; restore database until LOGSEQ 24286; switch datafile all; switch tempfile all; recover database until LOGSEQ 24286; }
Then I tried the bot in one:
run { SET NEWNAME FOR DATABASE TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169'; restore database until LOGSEQ 24286; switch datafile all; switch tempfile all; recover database until LOGSEQ 24286; }
Whenever I get one
Starting restore at 03-FEB-16 using channel ORA_DISK_1 creating datafile file number=1 name=+DATA_QUM169 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 02/03/2016 16:20:41 ORA-01180: can not create datafile 1 ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253'
The backuppiece which I bring are correctly defined with
RMAN> catalog backuppiece '/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1', '/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1'; cataloged backup piece backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1 RECID=3779 STAMP=902851052 cataloged backup piece backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1 RECID=3780 STAMP=902851052 RMAN> list backup; List of Backup Sets =================== BS Key Size Device Type Elapsed Time Completion Time ------- ---------- ----------- ------------ --------------- 3779 52.61M DISK 00:00:00 03-FEB-16 BP Key: 3779 Status: AVAILABLE Compressed: YES Tag: TAG20160203T145340 Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1 List of Archived Logs in backup set 3779 Thrd Seq Low SCN Low Time Next SCN Next Time ---- ------- ---------- --------- ---------- --------- 1 24285 11073415926066 03-FEB-16 11073416327345 03-FEB-16 1 24286 11073416327345 03-FEB-16 11073416678326 03-FEB-16 BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 3780 Full 813.86M DISK 00:00:00 03-FEB-16 BP Key: 3780 Status: AVAILABLE Compressed: YES Tag: TAG20160203T145042 Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1 List of Datafiles in backup set 3780 File LV Type Ckp SCN Ckp Time Name ---- -- ---- ---------- --------- ---- 1 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/system.1423.788355253 2 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/sysaux.1422.788355259 3 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/undotbs1.1359.788355263 4 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/users.1362.788355273 5 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4.1369.788356305 6 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4_files.1366.788356317 7 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms_archiv.1358.788357229 8 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/planwerte.1357.788357243 9 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_prod.1352.788456613 10 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais.1353.788456763 11 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms.1354.788456995 12 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/externe_wirk.1355.788457525 13 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2mt.1356.788458151 14 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_read.1351.788458291 15 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329 16 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657 17 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/macmon.1340.788458691 18 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais_read.1339.788458725 19 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2srm.266.788458799 20 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859 21 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/quickcheck.1338.788458887 22 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/switch.1337.788459139 23 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/veit_r.1333.788459167 24 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/test-btdb.1298.795097725 25 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11dev.986.874230931 26 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11devbt.985.874230963 27 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hrbew.1083.851007823 28 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/optimadata.1032.865951029
I also tried to put the new ASM SQL:
SQL*Plus: Release 11.2.0.4.0 Production on Wed Feb 3 16:04:05 2016 Copyright (c) 1982, 2013, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production With the Partitioning, Automatic Storage Management and OLAP options SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 1 - new file '+DATA_QUM169' not found ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 2 - new file '+DATA_QUM169' not found ORA-01110: data file 2: '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 3 - new file '+DATA_QUM169' not found ORA-01110: data file 3: '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 4 - new file '+DATA_QUM169' not found ORA-01110: data file 4: '+DGA112_1/apex11a/datafile/users.1362.788355273' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 5 - new file '+DATA_QUM169' not found ORA-01110: data file 5: '+DGA112_1/apex11a/datafile/apex4.1369.788356305' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 6 - new file '+DATA_QUM169' not found ORA-01110: data file 6: '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 7 - new file '+DATA_QUM169' not found ORA-01110: data file 7: '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 8 - new file '+DATA_QUM169' not found ORA-01110: data file 8: '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 9 - new file '+DATA_QUM169' not found ORA-01110: data file 9: '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 10 - new file '+DATA_QUM169' not found ORA-01110: data file 10: '+DGA112_1/apex11a/datafile/mais.1353.788456763' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 11 - new file '+DATA_QUM169' not found ORA-01110: data file 11: '+DGA112_1/apex11a/datafile/mms.1354.788456995' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 12 - new file '+DATA_QUM169' not found ORA-01110: data file 12: '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 13 - new file '+DATA_QUM169' not found ORA-01110: data file 13: '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 14 - new file '+DATA_QUM169' not found ORA-01110: data file 14: '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 15 - new file '+DATA_QUM169' not found ORA-01110: data file 15: '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 16 - new file '+DATA_QUM169' not found ORA-01110: data file 16: '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 17 - new file '+DATA_QUM169' not found ORA-01110: data file 17: '+DGA112_1/apex11a/datafile/macmon.1340.788458691' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 18 - new file '+DATA_QUM169' not found ORA-01110: data file 18: '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 19 - new file '+DATA_QUM169' not found ORA-01110: data file 19: '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 20 - new file '+DATA_QUM169' not found ORA-01110: data file 20: '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 21 - new file '+DATA_QUM169' not found ORA-01110: data file 21: '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 22 - new file '+DATA_QUM169' not found ORA-01110: data file 22: '+DGA112_1/apex11a/datafile/switch.1337.788459139' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 23 - new file '+DATA_QUM169' not found ORA-01110: data file 23: '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 24 - new file '+DATA_QUM169' not found ORA-01110: data file 24: '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 25 - new file '+DATA_QUM169' not found ORA-01110: data file 25: '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 26 - new file '+DATA_QUM169' not found ORA-01110: data file 26: '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 27 - new file '+DATA_QUM169' not found ORA-01110: data file 27: '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 28 - new file '+DATA_QUM169' not found ORA-01110: data file 28: '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form
But my new database will not set the new ASM and I have no why.
The db_create_file_dest parameter is set correctly, so I think that:
NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_create_file_dest string +DATA_QUM169
I forgot something? Would be nice to get help ...
A big thank you and best regards,
David
Your data checkpoint SCN file are in the LOW and HIGH range of the SNA for SEQUENCE 24286.
Therefore, your UNTIL clause should be 24287 SEQUENCE up to THAT.
Hemant K Collette
-
Problems with the layout themed to show/hide the region 25
Hi all, Ive hit another question that I hope someone can help with...
APEX 4.2.4 on XE... Theme 25.
I've reproduced this login as apex.oracle.com [email protected] password newpass 291 3 application page. (admin/admin is also implemented as a UN/pw)
I have a skin region see the this Im using as a region of select query. There are a number of boxes, and a couple of display only fields that have values returned in it.
I I set out them in a row, and after 3 items, I start a new line with the other 3 articles... that is
X X X
X X X
Except that with the region set to show/hide and the model of the value without tab, no sidebar I get.
X X
X
X X
X
If I change the standard region it works OK, and if I change models, it seems ok. Ive tried all the combinations of columns, etc, but nothing helps... Im trying to figure out if Im missing something, or I've hit a bug any... (almost certainly the old...) ...
Thank you very much indeed
Richard Legge wrote:
I have a skin region see the this Im using as a region of select query. There are a number of boxes, and a couple of display only fields that have values returned in it.
I I set out them in a row, and after 3 items, I start a new line with the other 3 articles... that is
X X X
X X X
Except that with the region set to show/hide and the model of the value without tab, no sidebar I get.
X X
X
X X
X
If I change the standard region it works OK, and if I change models, it seems ok. Ive tried all the combinations of columns, etc, but nothing helps... Im trying to figure out if Im missing something, or I've hit a bug any... (almost certainly the old...) ...
The difference between the models of the region is that the Standard region has defined Points of view and the show/hide does not work. This is the mysterious properties that Oracle has not yet bothered to document. Their omission of this model is indeed likely to be a bug.
Create a copy of the region show/hide template and add a point of view for the body of the region (content):
Name: Body of the region
Substitution of template: BODY
Grid Support: Checked
The maximum fixed grid columns: - 1
Use the new model to show/hide for the region of select query.
-
problem with list and point make showing is not the last element
Hey all the...
I have a strange problem with a spark list and item converter. All I want to do is display images. However, the last image is not rendered. The code is very simplistic. The HGROUP restores only the first two pictures. However, if I add a < s:lable > tag to the HGROUP after image, all three of the images that I expect to make it appear. Someone knows why?
Thanks in advance!
<? XML version = "1.0" encoding = "utf-8"? >
"" < s:ItemRenderer xmlns:fx = "http://ns.adobe.com/mxml/2009"
xmlns:s = "library://ns.adobe.com/flex/spark".
xmlns:MX = "library://ns.adobe.com/flex/mx".
autoDrawBackground = "true" >< fx:Script >
<! [CDATA]
Import valueObjects.ManufacturerIconBE;
[Bindable] private var comp: ManufacturerIconBE;
override public function set data (value: Object): void
{
model = value as ManufacturerIconBE;
}
[]] >
< / fx:Script >< s:HGroup >
< s:Image source = "{comp.imagePath}" / > "
< / s:HGroup >< / s:ItemRenderer >
Use preliminaryWidth and preliminaryHeight to book some dimensions of the Image.
-
Problem with Media Center recorded TV shows DVD burning.
I recorded a few TV using Media Center shows and when I try to burn on a DVD they start and then slow down and stop. I tried on two different computers Vista with Home Premium and the other with Ultra same on both. They identify to the about 23 to 32% complete before stopping and don't ever burn anything on disks. It is said that the engraving is underway.
Hi Kb11,
Have a. you tried to burn on a different DVD?
B. do you use a third-party burning software on your computer for CD and DVD burning?
C. Have burn you TV shows successfully earlier?
D. do you have an error when burning?
Burning a TV show on a DVD can take some time to complete, depending on three factors: the length of the speed of your burner DVD, added video files and resources of your computer system. Wait for a while and see if it ends.
- Click the Start button, click all programs, and then click Windows Media Center.
- If Media Center is not full screen mode, click the maximize button.
- Insert a blank recordable DVD into your DVD burner.
- Click on the notification, burn a CD or DVD which appears.
If you do not see the notification, on the Windows Media Center start screen, navigate to tasks, and then click Burn CD/DVD.
- In the Select the disc Format page, click Vidéo DVD, and then click Next.
- Type a name for your DVD, and then click Next.
- On the Select media page, click recorded TV or video library, and then click Next.
- Select the items you want to burn (check marks appear on or next to the items that you select) and then click Next.
- To add more TV shows or video files on the disc, on the Review & Edit page, click add more.
- Repeat steps 5 through 7 until you have added all the shows recorded TV and videos you want to burn.
- On the page of review & edit , click Burn DVDs.
- In the opening of copy notification, click Yes.
- Once the disc is burned, in the notification filling burn , click done.
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center
Please let us know the result.
Kind regards
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
Problems with custom HTML form entry
Hey everybody. I try to include form fields of seizure of custom text in my Web site. It is and tiself is not a problem. I add an HTML object and insert the code.
(However, I would like that there are 2 different styles 1) = > text background and gray and 2 white) = > blue background and white text. But as soon as I announced a form of the second type, the first chages to.
What happens / how can I change this?
Here is my code:
- < style type = "text/css" >
form {make: 12px Lato, arial; make-weight: bold; color: #ffffff ;}}
input {background-color: #0099ff; width: 220px; height: 24 PX; float: left; font: 14px Lato, arial; color: #ffffff; height: 25px ;}}
< / style >
< are method = "post" action = "send_form_email.php" >
< input type = "text" name = "corevalue2" value = "You can count on me" / > < br / >
< / make >
(2) < style type = "text/css" >
form {make: 12px Lato, arial; make-weight: bold; color: #333333}
input {background-color: #ffffff; width: 547px; height: 24 PX; float: left; font: 14px Lato, arial; color: #333333; height: 25px ;}}
< / style >
"< are method ="post"action =" ">."
" < input type ="text"name ="target4"value =" ' target4 ' / > < br / >
< / make >
I do not see the same behavior, made some changes in the code as target value is not defined.
Muse is rendered the same value, as inserted in the code, but are made to a few changes with the code then this could cause the problem.
Thank you
Sanjit
-
Problems with getting a slide to show 6 Captivate, which includes a video
I hope someone can help me with my problem. I am currently working in 6 Captivate. I have a project and I am trying to get videos to open and run. I inserted a new content slide into my project. I then added a FLV video this slide (it is slide 11 in my project). I have a previous slide (slide 10) which has an image and button and I realized this button to go to slide 11 and then to show the video when clicked. My problem is that when I click on the button slide 10, it does not take me to slide 11 (the slide with video), it just stays here on slide 10.
The other piece of the puzzle, is that this is a simulation that has been registered. So now 10 Slide, I also have a click that is supposed to box to take the user to slide 12, (the next step in the simulation) it pays, and then on slide 12, it opens the slide video 11 at the same time.
I hope this isn't too complicated, but I would really like to help if there is someone who can help me.
I sent a msg private please check.
-
Problem with Fn + F6 to stop showing on Acer Aspire 5520
Hi, I have an Acer Aspire 5520-5163 (I also have an Acer Aod150). I had Windows XP and now have Windows 7 on both. Since coming to Windows 7, I lost the use of the function Fn + F6 to turn off the screen. I installed several programs of Launch Manager and it didn't work. Also when I changed the NVIDIA drivers I momentarily recovered the use of this but now she again. I searched the web and found nothing. Really, I've used this in the past six years, I had this PC. On another Acer, it works fine. I don't know if it's the video drivers (if I uninstall install Windows as they once again immediately) or what may be the problem, but I would appreciate any help really. Or another way to turn on/off the screen by a combination of keys. I used the program turn off LCD but I want something that can be turning on and off with the key combination. If it's Fn + F6 better.
Kind regards
Fernando
Hi, sorry it took me so long to answer. The link you provided was for a 64-bit operating system and mine was 32-bit (which I think that I have not mentioned). It seems that the problem was some malware or something because yesterday, Microsoft Security Essentials detected some Hack and after its removal, I can say with joy that I can reuse Fn + F6! Thanks anyway
-
Problems with a JotForm is not showing is not on all breakpoints
I have a sensitive contact of JotForm form and it does not appear on all breakpoints. JotForm support told me that the div I use to insert the form has implemented the rules don't not to display smaller screen sizes. This is not correct. I am insert the code for the form by using the insert HTML and the form is set to display on all breakpoints. Muse support told me that the html of the form is in conflict with the html code generated by Muse. After all this, my form still does not appear, and still don't know where is the problem. Can someone help, please?
The form is here:
Thank you.
It worked for me:
In Muse, delete the HTML element that contains the form. In JotForm, go to your form, click on publish, incorporate, and then choose the options to embed iFrame. Return to Muse, add a new element of HTML and paste the iFrame in it. Publish your site.
It worked for me and the shape is now visible on all breakpoints. This solution was given to me by the support of JotForm.
-
Problems with creative cloud, Photoshop keeps showing trial
OK, I had to reinstall the creative cloud to my computer. everything went smoothly with the installation, but when it was time to open Photoshop in the cloud he stated that the trial was on and it was time to buy to continue. I pay monthly for the service then why the problem does occur.
Check your subscription payment has been processed and your adobe id is correct, https://www.adobe.com/account.html
log out and then back to your office to cc using the same adobe id allowing you to check your subscription is current, https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
-
Excerpt from XMLType problem with different namespaces
Hello
I need some advice on how to extract the child element to the XML fragment where the parent namespace differs child name space. I have done the broad research and I've tried several options but have had no success.
This is fragment plsql sample
vTheXML: = XMLType ("< GeneratedDocument xmlns ="http://tempuri.org/"> ")
" < file_name xmlns =" http://services.DPM.com.au/intelledox/ "> Test.pdf < / Filename > .
(< / GeneratedDocument > ');
Below successfully returns a GeneratedDocument element (IE any fragment)
vExtractXML: = vTheXML.extract ('/ GeneratedDocument ',' xmlns = "http://tempuri.org/"');
But none of below works. They return null. I do not know how to represent the different namespaces in the function call retrieves XMLType
vExtractXML: = vTheXML.extract ('/ GeneratedDocument/filename ',' xmlns = "http://services.dpm.com.au/intelledox/"');
vExtractXML: = vTheXML.extract ('/ GeneratedDocument/filename ',' xmlns = "http://tempuri.org/"xmlns ="http://services.dpm.com.au/intelledox/"');
vExtractXML: = vTheXML.extract ('/ GeneratedDocument/filename ',' xmlns = "http://tempuri.org/"');
Below works, but would ideally use more precise criteria of XPath
vExtractXML: = vTheXML.extract ("/ / filename ',' xmlns ="http://services.dpm.com.au/intelledox/"'");
Thank you
Hello
Of course, you cannot declare two namespaces by default in the namespace mapping, use at least a prefix to distinguish them:
vExtractXML: = vTheXML.extract ('/ GeneratedDocument / ns1:FileName ',' xmlns = "http://tempuri.org/" xmlns:ns1 = "http://services.dpm.com.au/intelledox/"');
(NB: extract and extractvalue, etc. have been deprecated in 11.2)
Maybe you are looking for
-
I just downloaded Firefox and has been careful to choose a password that I can remember. I checked the account using my Outlook email. However, when I tried to browse the other themes following the link on the Firefox Customize page should I connect
-
Phonebook ERROR when ordering...
How can I print my book photo - the answer is... "the credit card associated with this Apple ID is assigned to the store aus. If you change the store, you will need to place the order again. What the *? Continue to press 'Continue' and then nothing
-
Need to BOOT BACK CD or files for Satellite L300D
For repair "BIOS" sweetie, I think I need a program BACK and a BIOS file to create a CD of START-UP of the BIOS.Who had an idea where I could find these?
-
error on the stand-alone with Subvi application
I developed a VI that call a Subvi with Labview 8.6. It works fine in VI or in an executable file on my development computer. I want to run it on another PC, so I have created an installer with the following additional installer: -4.4 NI-VISA run tim
-
When you try to open a link in an email I get the following message: this operation has been cancelled due to restrictions in effect on this computer. Please contact system administrator. "This is a home PC so I guess I am the administrator and I don