Problems with getting a slide to show 6 Captivate, which includes a video

Similar Questions

• Someone at - he had or having problems with getting nVidia NVS 450 working resolution?

  Hi all

  We got a new C20 with a nvidia NVS 450 card - and a $ monitor. The C20 has Windows 7 preinstalled; the out-of-the-box resolution is 640 x 480 and we couldn't make it go higher than that! The $ and the video card are connected via the DisplayPort cable that came with the unit. After you have reinstalled the video card driver that comes with the unit (on a CD containing drivers for Windows and Linux), we could never get to go beyond 640 x 480 resolution. We left thinking that it must be a quirk with Windows 7. We were going to install Linux on the C20 anyway, so we moved on this.

  We installed Fedora 14 (64-bit) install the video driver nvidia who was on the CD and cannot get the display resolution greater than 640 x 480. After a few days of tests n errors referring to various online forums, we have successful get resolution up to 800 x 600, but not the expected 1900 - something resolution the $ and video card holders.

  Someone at - he had problems with getting the resolution of the video card to work? If so, were you able to solve the problem? We thought we would start here instead to call Lenovo support first, because usually technical questions, we get smarter than over-the-phone responses. Also, waiting for answers on a forum is less frustrating than the vote by phone.

  Chris

  Thank you for your response.

  I had the chance to get their hands on another monitor, and when I plugged that, I got the full resolution. After a lot of testing, I decided that it was a faulty monitor and it had nothing to do with the video card. I finally got a replacement screen for the one who wasn't giving me the full resolution.

  Subsequently, I went ahead and got the latest drivers nvidia on their Web site. Everything works fine now.

• So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  original title: incorrect Homegroup password

  So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  All computers:
  Have enabled IPv6
  Use Microsoft Security Essentials with the last update
  Are connected to the same router (Linksys WRT54GX2)
  Have no other third-party firewalls or AV installed and have been neatly eliminated via their respective tools when they had their
  Can be seen in the network and can access any other files via 'network '.
  Have the correct date and time and are all in sync with time.nist.gov.
  Have the same network sharing settings (network discovery on, files and printers sharing folders public, sharing, streaming, wide, 128-bit encryption, sharing password protected, to allow windows to manage the homegroup connections)
  Network is set at home, not in public

  The computer that has implemented the homegroup is connected via ethernet to the router while other computers use to access the router 802.11 g I tried to delete and redo the residential group as well.

  Despite all this, it is said that the homegroup password is incorrect for both netbooks (where it says it has encountered an error). I realize that it is case sensitive and I entered the password correctly. I also ran the resolution of the problems of the homegroup on all 3 machines and still no luck. I also tried to change the password and restarting of machines.

  Any suggestions? I was _really_ hoping it will work right out of the box. Maybe it's something with the router? I don't really know. Any help is appreciated. Merry Christmas! : D

  Hello

  check out this link.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

• Im having problems with getting my sound to work on windows 7 RC 7100 32 bit I tried to use 2 soundcards.

  original title: Audio does not work

  Problems of sound in windows 7

  Hey all. Thanks in advance for any time you spend to help me.

  Im having problems with getting my sound to work on windows 7 RC 7100 32 bit
  I tried to use 2 soundcards.

  1: creative X - FI Extreme
  for creative people, I tried using drivers creative Beats, creative version drivers and vista 32-bit drivers with no luck.

  2: its integrated with Intel DP35DP motherboard card
  7 drivers are available for intel sound I used vista 32 bit since no windows drivers.

  I have 3 device failed in the Device Manager. Simple PCI controller, peripheral Audio communications of high definition, Microsoft makes confidence audio drivers.

  the 3 rooms of this note.

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  with or without pilots the warrning does not change.

  System Spec.

  Card mother Intel DP35DP
  3 GB ram
  Core 2 duo E8400 with
  ASUS Nvidia Geforce 8800gt
  Creative X - FI extreme pci / Intel integrated audio system
  Termaltake 600 watt Toughpower supply
  Pioneer dvd Sata burner

  Managed to solve this problem by installing the 64-bit windows 7 instead of 32 bits.

  not sure why the sound failed. but now its fixed.

• I have a problem with my indenting, there all of a sudden everything including the headers and about 2.5 inches in withdrawal. I have

  I have a problem with my indenting, there all of a sudden everything including the headers and about 2.5 inches in withdrawal.

  Looks like your BMP format is defined to respect the heads side.  Open the designer of TFP and try to put it like that...

  

  I have no idea why the script would have changed your BMP formats.  Depends entirely how the script was executed - the authore makes the script actually do.

  I suspect that you can import formats of a document where you have NOT run the script, and it would return to the formatting to the way you want.  I hope you save your work!

• Problems with reset toggle buttons that show/hide captions

  I have a problem with the buttons toggle that I use to show/hide a number of legends about a single slide of the reset. The rocker works very well on the first button when I click on and off to show or hide a legend. A simple click on and watch legend. One click off the coast and the legend disappears. However, if I leave a legend that is displayed and click on other buttons to show/hide the other legends, they do not show or hide in a single click. They require two clicks. It seems that something continues the read head after that first toggle is used until there is a second click. The same thing happens if I reset to enter action. If I click on a caption and leave it in place and move to another slide, it disappears when I re - get this initial slide. However, it requires two clicks, not one alone, to display the legend. I find it very strange; I learned most of my techniques from the Lilybiri blog, but this problem does not occur on his examples. I think I'm missing something obvious, but may not know what it is. Any help is very appreciated.

  

  

  

  Yes, I use Cp6. What I wanted to say about re-use, is that I have different scenarios where a similar script could be used, if your suggestion of a model is a good. My original intention was to write it in a txt for reference. Thank you very much for all your suggestions and links. I'll keep you posted.

• Problems with boxes and slide do not pause.

  Hello

  I continue to struggle with trying to keep the slides paused while the user interacts with buttons or areas to click on my pages. I tried to use the click box hidden out of the Tower, but it does not work for me.

  I would be eternally grateful if someone could take a look at this slide and let me know that I can get this to work. It's something I will do again and again (in different ways), so I really need to figure this out once and for all.

  Someone is willing to work with me on this? Even if it is offline, I am pleased to publish the results as soon as we have them working.

  Here's the problem:

  In the slide, the user has several options to choose from. They are to click on the options they think are correct. I placed boxes click on each option with attached actions. However, it seems that the March slide happily on his way with every click, so that finally the click boxes are no longer available to click. What can I do to stop this?

  Captivate 4 file attached.

  Hello

  I downloaded the file and it looks into Captivate.

  What seems to be the case, it's that when you click, the break is released. Therefore, a way to "reset" from the reading head.

  Why not try to create a tip Action that performs projection, hiding and resetting the read head?

  It is relatively simple. You use a Standard of the Show Action. Standard action of hide and seek. Then follow in the end with a reset of the read head. Normally, I use a transfer action. I assignrdcmndGotoFrameAndResume the value of rdiinfoCurrentFrame - 5 (to save the 5 frames).

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Problems with getting an interactive E-book created in ID CS6 to work with ID CC 2015

  Hi all

  I have a problem with an e-book that I created with Indesign CS6.  He has slideshows, blocks of video image, zoomable and scrolling text boxes between assets. It was never published but was over and I was able to do work through the constructor app let me see on Viewer Adobe on my Ipad. Here, everything works perfectly. Since then, I changed cs6 to 2015 for CC and now I have problems.

  I wan't to make some corrections to the origianl design and content and publish correctly. When I open the various documents that the book consists of (a document PR. Chapter of the book) it is no longer the option to create the app that I used in the old CS6. When I export a chapter the ibooks app opens and opens the chapter, well but some interactive things do not work: my slide show does not automatically change the slide it's supposed to, I also have a zoom in the window of a drawing I did and all the boxes scrolling with text and drawings do not work either. Video clips to work however. When I check the slide show options in the document, they seem to look ok. Now my questions are:

  How do these things work?

  What is the difference in the CS6 and CC 2015?

  Can someone direct me to some tutorials that can help me solve the problem?

  I really hope someone can help I would like to finish my project I've been working on for a long time...

  Thanks in advance

  Berit

  This isn't an EPUB, it's a DPS folio. Some of the effects of work, some do not, but the overlays Panel won't be any help.

  You can add scrolling images with this: universal scrolling frames | Ajar Productions

  Pan and zoom is not supported and are neither self running slideshows. If you can give us more details, perhaps alternatives can be provided but be very specific as to how you plan on the publication of this.

• Newbie problems with getting a local server from the BFC set

  It started in another post by me about what I thought, it was a problem with port 8500. I had looked at the getting started with video CFB, and on that, he used localhost as the server name and as the host name. He then assigned port 8500 as the Port of the Web server.

  When I do that it is in the windows as stopped servers. If I try to start it the error I get is

  'Start-up localhost' has encountered a problem

  Make sure that the server is not already running or any application does not use the port of the Web server.

  So as an experience, I changed the port 80, because the admin page doesn't work in http://127.0.0.1/CFIDE/administrator/index.cfm

  The server at the bottom of the BFC window then shows a server running.

  I create a small "Hello World" index.cfm page and when I touched one of the tabs of the browser, Firefox and IE in my case, I get the following error.

  Error during preview generation:

  There is no server configured for the project myproject , to which belongs the index.cfm file. Configure a server in ColdFusion in ColdFusion server settings before you continue.

  What Miss me?

  Thank you

  Dennis

  You must specify the BFC BFC server must use in order to preview the file.

  If you need to associate a server with this project. To do this, right-click on the project-> properties-> ColdFusion server settings.

  Here in the "Server" dropdown list, select the server that you have added in CFB.

  Once this is done, make sure that your project is in the root of the document from the server in your case, that could be the Inetpub\wwwroot.

  Once this is done, the preview should work.

  -Bhakti!

  Adobe ColdFusion team

• I am having problems with getting my Outlook Express 6 to hang with my hotmail account.

  I get an error Ox8OOcccOD code, hotmail server is not found.  I had windows mail and had problems with my computer and my son uninstalled and reinstalled everything on my computer, and Outlook Express 6 has been installed.  Can someone give me a help as how to connect to hotmail account right.  I tried almost everything.

  Thank you

  Hello

  You can check these links:
  How to configure Outlook Express to use a Hotmail account
  http://support.Microsoft.com/kb/220852
   
  You receive an error message when you use Outlook Express or Outlook to access your Hotmail account
  http://support.Microsoft.com/kb/878462
  
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
  http://support.Microsoft.com/kb/813514

• Problems with the layout themed to show/hide the region 25

  Hi all, Ive hit another question that I hope someone can help with...

  APEX 4.2.4 on XE... Theme 25.

  I've reproduced this login as apex.oracle.com [email protected] password newpass 291 3 application page.    (admin/admin is also implemented as a UN/pw)

  I have a skin region see the this Im using as a region of select query. There are a number of boxes, and a couple of display only fields that have values returned in it.

  I I set out them in a row, and after 3 items, I start a new line with the other 3 articles... that is

  X X X

  X X X

  Except that with the region set to show/hide and the model of the value without tab, no sidebar I get.

  X X

  X

  X X

  X

  If I change the standard region it works OK, and if I change models, it seems ok.  Ive tried all the combinations of columns, etc, but nothing helps...  Im trying to figure out if Im missing something, or I've hit a bug any... (almost certainly the old...) ...

  Thank you very much indeed

  Richard Legge wrote:

  I have a skin region see the this Im using as a region of select query. There are a number of boxes, and a couple of display only fields that have values returned in it.

  I I set out them in a row, and after 3 items, I start a new line with the other 3 articles... that is

  X X X

  X X X

  Except that with the region set to show/hide and the model of the value without tab, no sidebar I get.

  X X

  X

  X X

  X

  If I change the standard region it works OK, and if I change models, it seems ok.  Ive tried all the combinations of columns, etc, but nothing helps...  Im trying to figure out if Im missing something, or I've hit a bug any... (almost certainly the old...) ...

  The difference between the models of the region is that the Standard region has defined Points of view and the show/hide does not work. This is the mysterious properties that Oracle has not yet bothered to document. Their omission of this model is indeed likely to be a bug.

  Create a copy of the region show/hide template and add a point of view for the body of the region (content):

  Name: Body of the region

  Substitution of template: BODY

  Grid Support: Checked

  The maximum fixed grid columns: - 1

  
  

  Use the new model to show/hide for the region of select query.
  

• Strange problem with HorizontalFieldManager - it does not show on real device bitmap

  I have a rather strange problem with the HorizontalFieldManager on my Blackberry 8820, which I did not on the Simulator, or done other blackberries that I tried to install my game.

  The problem is that bitmaps that I add, do not appear on the actual device, as in the images below. The code is provided below as well. No idea how to debug, or resolve is appreciated.

  Here's what I see on Simulator and some devices

  

  Here's what I see on the real blackberry:

  

  Code:

  ......

  OK, I found the solution - the problem is that there seems to be a bug where you can't put more fields button radio on a horizontal layout manager with 4.2.2.x.

  The solution is to extend the RadioButtonField field and replace the positioning method:

  RadioButtonField radioField = new RadioButtonHack ("", textureGroup, isSelected);

  SerializableAttribute public class RadioButtonHack extends RadioButtonField {}

  public RadioButtonHack() {}
  Super();
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected, long style) {}
  Super (label, group, selected, style);
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected) {}
  Super (label, selected group);
  }

  public RadioButtonHack (label As String) {}
  Super (label);
  }

  Protected Sub layout (int width, int height) {}
  int temp = this.getPreferredWidth ();
  setExtent (time, height);
  Super.Layout (time, height);
  }

  }

  resolved http://supportforums.blackberry.com/t5/Java-Development/radiobuttonGroup-related-problem-in-storm/m-...

• problem with list and point make showing is not the last element

  Hey all the...

  I have a strange problem with a spark list and item converter.  All I want to do is display images. However, the last image is not rendered. The code is very simplistic. The HGROUP restores only the first two pictures. However, if I add a < s:lable > tag to the HGROUP after image, all three of the images that I expect to make it appear.  Someone knows why?

  Thanks in advance!

  <? XML version = "1.0" encoding = "utf-8"? >
  "" < s:ItemRenderer xmlns:fx = "http://ns.adobe.com/mxml/2009"
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx".
  autoDrawBackground = "true" >

  < fx:Script >
  <! [CDATA]
  Import valueObjects.ManufacturerIconBE;
  
  [Bindable] private var comp: ManufacturerIconBE;
  
  override public function set data (value: Object): void
  {
  model = value as ManufacturerIconBE;
  }
  []] >
  < / fx:Script >

  < s:HGroup >
  < s:Image source = "{comp.imagePath}" / > "
  < / s:HGroup >

  < / s:ItemRenderer >

  Use preliminaryWidth and preliminaryHeight to book some dimensions of the Image.

• problem with the playback of the record to Captivate (sensitive design mode) 8 screen

  I use 8 Captivate sensitive design.  I did some screen recordings (in demonstration, training and assessment methods) and that whenever there is a short video clip (for example by dragging a bar window or a cursor on the screen), it plays fine in design mode, but then when I publish the entire project for the preview, the clips are suppressed.  It seems that these clips are integrated into my slides Fund and are in SWF format.

  I wonder if they do not play properly is because I publish to HTML5.  If so, how can I convert these small clips SWF to something else?  And if not, what else could be wrong?

  My solution is to replace these slides FMR (having a camera on the film) which sometimes cause issues when publishing to HTML5, cpvc slides, if I can't avoid them. Very often, you can avoid dragging the mouse: example is to click on the scroll somewhere bar instead of drag in the scroll bar, to use the hotkeys etc. When you can't escape a "video shift' stop recording, use the big slides, video demonstration or Insertion button, slide CPVC and you will get video demo mode, where you can record video (its editor-in-Chief is much more powerful than the limited functionality of FMR-edition). When you are finished with the cpvc-slide, you can continue capturing software with slides, software simulation (he is lacking in the Insert menu for some unknown reason). It's more work, I know, but will play in HTML5 (these slides are converted to MP4), its quality is much better than FMR and you have video editor if necessary.

• How to solve a problem with Adobe Premiere elements 10 preview screen blacking out instead of video game?

  I have been using Adobe first items 10 for several years now and just recently started having this problem with my computer. I can load some types of videos sometimes in the preview screen, but when I try to load a mp4 video in my draft preview screen it plays not the actual video and audio. The video rest blackout curtains. Now I can scrub through the timeline and see screenshots of the video, but when I go to the preview screen it just turned off. I have a Nvidia GTX 550ti on my computer. The drivers are completely up to date. I made sure the program is up to date (as you call it up-to-date) and made sure everything is up to date. This program worked fine a month ago.

  nick_c

  There has been a known issue for a long time about the specific issue of first Elements 10 running on a computer that uses a videocard of NVIDIA GeForce graphics cards. The answer is do not have the updated driver version, but to use the version of may 2013 of the driver. The full story on who is... ATR Premiere Elements troubleshooting: PE10: NVIDIA video card Driver Roll Back

  On what computer operating system is your first items 10 running? There is a good chance that the old drivers on the NVIDIA website are maybe not old enough. However, plug your information on the NVIDIA website to see if you can get the choice of a version of driver for may 2013 all about. If you can't, then you could go on thinking that your card has been on a schedule of automatic update and the previous version of the driver is may still be on your computer. If Windows, see Device/Manager/name of your map display adapters, then the tab driver properties.

  If all else fails, then some choices are

  1 get a card, not NVIDIA GeForce for your computer

  2. go to a later version of Premiere Elements - 11, 12, 13 appear to be immune to the very specific problem first Elements 10/NVIDIA GeForce.

  Please consider. If any questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA