Problems with edge in DPS parallax effect

Similar Questions

• I have installed Adobe Audition on my pc but I have a problem with the time and the effects of pitch appear unavailable

  I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not

  My guess is that you are in multitrack view and not editview

  These fx are destructive and only take effect when you change a single audio file in editview

• Hi, I have a problem with a basic movement scroll effect.  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., he probably didn't unde

  Hi, I have a problem with a basic movement scroll effect.

  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., probably he did not understand what I wanted him, because English is not my native language, so one will try to be very clear on this one...

  Please note that I am new to dream, this is my first project ever.

  My idea is as follows:

  When the customer comes to our site of companies, he sees just our logo on a white background. the logo is composed of, say, four elements. When the client makes a scrolling down, the logo begins to transport: first the first part of the logo flies on the left side of the site, then the second part of the logo disappears down, then the third part of the logo flies to the right, then the fourth part of the logo flies upward and out of sight of customers. given what I've seen, it is possible to do...

  so...

  now I have four parts of my logo imported as png files in muse and was assembled in design mode to build our companies logo. I select each of the four parts and go to the effects of scrolling to the left tab next to the tab layers first I get the same values for each of the four parts: first movement: x 0 and x 0 again for the movement of the left and right; key position (t-handle): 0px; final movement: x 0 and x 0 for the value of left and right.

  now, I hit "Preview". : the logo is "pinned" to the correct location, I can scroll but the logo stays where it is. So far so good...

  now, I select all four components again and go to the tab scroll to 'final motion' effecs, I click on the drop down arrow and enter 1 x. I struck an excerpt...

  When I scroll the WHOLE grave logo down... well.

  NOW, I want the first part of the logo down, THEN part II to move left, THEN the third part to go to the top, THEN the fourth part to go right.

  so I select ONLY the first part, go to the request of scroll, to the 'final movement' tab, I click on the left arrow, then I go 1 x. (the value of up-down, I put to 0 again)... I struck an excerpt...

  the first part of the logo is left as soon as I start to scroll, the other three parties still go down at the same time...

  NOW, I want the second part of the logo to start to move, when the first part left, not at the same time as the first part.

  THEN I SELECT THE SECOND PART AND DRAG ITS HANDLE IN T (KEY ITEM) DOWN, LETS SAY: 200PX. THEN IT STARTS TO MOVE ONLY AFTER THE CUSTOMER HAS REACHED THIS POINT, RIGHT?

  BUT WHEN I SAW THAT *, THE LOGO IS NO LONGER TOGETHER, THE SECOND PART IS FLOATING ANYWHERE, BUT WHERE IT SHOULD BE... WTFF?

  short: when I move the t-handle, the initial position of the object changes. That's what I said to the adobe employee, but he said, this is the expected behavior...

  But if that's the case, how can I have my four parts correctly together, so they form my logo, but with different t treats, so they all start to move at different times?

  Pleeease help me, I will die of frustration here...: () this behavior is not normal, right?

  Thank you very much to everyone who reads this message and tries to help him...

  All the best,

  Niki Lapan

  I'm not good at explaining things that im going to download the file, I did for you. hope this helps you solve your problem

  https://www.mediafire.com/?xiild0yhr5cna7s

• Some problems with HD treatment in After Effects movie

  Hi all!

  Composition of a movie, I need a little sophisticated for Premiere Pro color correction (the details are displayed in the first forum: http://forums.adobe.com/message/3064888#3064888)

  In a few words, I tried to do several layers of color correction to match the appearance of some clips filmed in different conditions.

  I had no problem with the creation of several layers and masking them as I wanted. However, what got me killed, film dimmed HD AE, so I had to put an end to the experiment.

  I wonder if anyone has experienced the same problem?

  I see a lot of halos of your film. This is usually a sign only in the technical sense, you overcranked your colors when the correction without regard for the valid 'safe» beaches These things can easily throw off encoders that use chroma sampling such as fact under all MPEG stuff. Aside from that I don't see much that would be bad, but do not forget that one) work from compressed images, b) stabilization already details kills by interpolation of pixels and c) all compression applied to the already compressed images will obviously make things worse. You, me, at least, everything is explainable and this isn't a problem with AE in itself, but rather the specific workflow. The only way I see to improve things is really work at the beginning of the string, and request the release / deartifacting filters before you do anything with images. which will minimize loss of pixel information when stabilize. From there, of course, change your methodology for correction of color to appear in these lines...

  Mylenium

• Problems with the installation/opening After Effects 7.0 Pro

  Good morning/evening. Can someone help me get my copy of After Effects (7.0 Pro) to run? When I try to run the program, in a first step, the screen goes black, causing me to have to use the Task Manager to close. When I do that, I get the error message that:

  "After that the effects cannot continue: Sorry, After Effects broke down." See /http:www.adobe.com/support/products/aftereffects.html for known issues. If you can't always solve the problem, contact Technical Support of Adobe (2).

  (0: 42) »

  On the second attempt, I am asked to enter my serial number (my name and my organization is already automatically registered) but when I hit ENTER, told me then:

  "After effects error: your serial number is not valid."

  (0 :: 3) »

  I tried to enter my serial number with and without a hyphen after each number 4 (ie: XXXXXXXX-XXXX-XXXX-XXXX etc.), and I tried the uninstall and repair the program, but to no avail (I am invited to insert the disc by repairing, even if the disc is already in the drive and the seconds after the start of uninstall AE, I get the prompt "the wizard was interrupted before After Effects 7.0 could be installed completely (even if I try to UNINSTALL).") Your system has not changed. To complete installation at another time, please run Setup again. "Since my product does not give me the opportunity to talk to someone on the phone, I have to post on the forums. If anyone has experienced the same problem and knows how to fix it, please help!

  FYI: I have a HP Pavilion 2000, Windows 8. If the additional pc specs are needed, let me know.

  If it's cs2, error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

• Edge 20141 problem with edge commons do not work now

  Hello

  I'm trying to make Parallax but with common edge but do not work now, working with CC 2014. If anyone can help me thank you

  There is no need to uninstall. You can have both versions of the edge that is installed on a system.

  Go to, animation HTML | Download the free trial version Adobe Edge animate CC

  And select the 'CC 2014 simulation' menu dropdown and download and install.

• How to make an image/object move with edge of the layer effect another?

  Hello

  
  I'm doing a video presentation of Whiteboard.

  
  What I should really do is bind the sequence .png of the arm/hand to the effect of sequential race that I applied to the layer below, as to pretend that the hand movement draws this layer (which is actually a scanned hand drawing) after masks I created with the Auto route tool.

  Obviously, I need to find a way to do it to avoid creating keyframes for each unique hand (REALISTIC) movement.

  I train after effects CC 12.2. I have a composition of 'HAND' with 7 different .png goes on loop, stop motion such as; a composition where the edge effect is applied to the design and overall composition where I would like to merge the previous two.

  Does anyone have any suggestions?

  
  Thanks in advance

  FP

  It may be possible to copy & paste the masks of illustrator and join some of them in a continuous path, however, but otherwise he must get used to the fact that there is no automated for any solution. Some things just need a tedious manual work and it's one of those things...

  Mylenium

• Lag / smooth problems with edge 7

  Hey,.

  It's me again, then, I have a great difficulty, any delay or smooth.

  5 m, it was fine, and when I opened my edge work 5, there is no lag / smooth all bad.

  But now, on the edge of 7, it's just terrible, this is my project, if you could find what the problem is:

  Edge 5 here (it is smooth and without lag) > http://www.2shared.com/file/aDkn21bD/Edge5.html

  Edge 7 here (GAL / not smooth) > http://www.2shared.com/file/_BcD23f9/Edge7.html

  The bad news is, I work exactly in the same way, so really don't know what to do, because I can't use Edge 5 more...

  Thank you.

  Hi, Paolo.

  Sorry for the silence on this point - we have been working on it internally and we believe that we have discovered the source of your problem.  First of all, here are the fixed files:

  Published files:

  http://www.gotspit.com/edge/mobileTransparent/index_h.html

  Source files (including a published folder):

  http://www.gotspit.com/edge/mobileTransparent/edited.zip

  What was going on, it was that you were maxing out the memory of the device on the iPad.  Even if your png is small on the device, they are each 1024 x 768 with huge parts of transparent background.  While this tablet really well in PNG format, he ends up taking a lot of memory when he gets blitted to the screen, as the operating system interprets the PNGs and transforms a bitmap internally.  Then think: 1024 x 768 x 4 bits per pixel and 19 pictures (18 pictures falling and a background image), as well as a possible additional bit per pixel transparent to indicate its status as a transparency.  Depending on the device, it could run out of memory pretty quickly.

  So that it is much lighter, I've cropped each PNG as close to the image I could using Fireworks and then edit the file to use x, info is for the image to animate dashboard instead.  Once we released this version, we were unable to reproduce your problem.

  Please let us know if the new version hosted on my server works best on your device!  BTW, the graphics are beautiful, and I like the hexagonal works.

  See you soon,.

  -Elaine

• Problem with the installation of After Effects CC

  Hello

  I downloaded the trial version of Adobe after effects CC. As soon as I install, I get the following message:

  
  

  After effects error: current Crash. Last recorded message has been: 3940 > < GPU Manager > < 2 > Sniffer result Code: 3

  I have an i5 4440, 8 GM of Ram, NVIDIA NVS 315 graphics card and running on Windows 7 Professional (without SP1).

  What can be the problem? After Effects CS6 works very well and the first CC & CC hearing Edition. Graphics card drivers are uptodate.

  Help, please.

  Kind regards

  KapSin

  You must have Service Pack 1 installed. Many things will fail otherwise. That's what the system requirements.

• Problems with EDGE and Firefox 17

  17 Firefox is configured as my 'default' browser (Win7pro).

  I have a project loaded, saved dashboard and running. The project plays perfectly in firefox 17 when I use "Preview in browser" dashboard. But if I try to open the html package exported directly in firefox I get a message error "additional plugins are required to display the media on this page" with an option for 'install' plugins such as of course it does not find when you try to do. All java plugins are up-to-date and updates. Then...

  Why it works fine when I use "Preview in browser" directly form edge and not when I try to open the page directly in firefox 17? What does EDGE when he "sends" a glimpse into the browser that it doesn't when it creates the html export package?  BTW, everything works well in IE9.

  Joel Veizer

  I just downloaded the

  Your project file > .html (to open in FireFox) works very well. I don't get all the guests, either. Everything smoothly.

  I just created a simple page n Dw > added the package .oam of Board Composition. Saved and viewed in FireFox - works a charm and no warning. DW does not preview in application of edge entertainment.

  I can't explain why to make your FireFox with messages. The only thing I can see is if you have a few FireFox debugging extension or plugin installed.

  I see one thing about your project file (although I doubt that's the cause of the quick FireFox question)-your project seems to be a "report of an earlier version. I can say this is because your scene Panel Elements reference is tiny (stage

  ). That was how it was in Preview on Adobe Labs builds. Since the v1 should now appear like this (Stadium

  ).

  Darrell

• Problems with Dynamic Link and After Effects

  CS4 on Vista Ultimate 64. I recently worked on a project using the related dynamics AE comps and sequences first. Still seems to have a problem of transcoding DVD. I had to give up after several hours. I removed the comps AE project and the DVD set up fine with just the sequences of the body. I am inexperienced with AE then I guess I'm doing something wrong. Everything must be rendered before connecting a comp? Is there a limit to how many sequences and comps can be related to a project? I'm overloading my computer? I have 8 GB of RAM and 2.66 GHz Core 2 Quad CPU. Resource of the computer monitor shows always maxed out CPU and almost to the maximum RAM for transcoding in Encore (or to do anything whatsoever in AE)

  Why not ask such questions in the AE forum? Aside from that, using AE and DL organization at the same time can easily deplete all your system resources and can cause any kind of questions, as only one connection is supposed to exist at any given time. So it is certainly in the way in which you use, but not necessarily 'bad', just a miserable combination that makes impossible things.

  Mylenium

• Refine the big big problem with edge

  Hello

  I'll try to be understood. My language is french, but I can't find a solution to my problem, so I'm here.

  I just downloaded Photoshop on my new computer. Before, I was using on my old. So I tried some manipulation just to make sure that everything is ok, and I discovered that the edges to refine tool has changed (in french, it is select and mask now "select and mask"-I don't know if it's exactly like that in the English version). When I try to use it, I got an error message: could not complete the command because the file is not found.

  I don't know what to do. The FAQ suggests you to download an older version of CameraRAW, but in a pkg file, just, I can't open. I'm on PC.

  Please help me.

  Thank you.

  Oh my god! I got it! I just reset the tools and magic!

• Problem with Activation of DPS simple editing?

  Last week, should apply in the creative cloud.

  I charge money to TDC (Creative cloud for the team) has been sent to South Korean Adobe.

  Unique Edition of DPS ipa, zip store always why not?

  DPS simple editing (ipa, zip down and submit to appstore). I would like to use.

  

  Refer to this help link: http://helpx.adobe.com/digital-publishing-suite/kb/dps-ccm-users-get-activate.html

• Problems with auto-trace on After Effects. Continues to create a straight line

  I am applying an auto-trace on a clip, but all the images bit it will just start make a straight line, a part of the person missing. How can I fix?

  
  

  There is nothing to fix. Looking at your picture, it is clear that you exceed the maximum number of points of mask / mask paths. Sorry, you cannot play the card of lazy here and he draw manually.

  Mylenium

• Problems with edge animate in Muse and chrome

  I have a small header built in animate... works very well in exported HTML anime...

  When putting in the animated animate OAM packet, then inserted into my site from Muse...

  everything looks fine in the preview browser (chrome) then when you export as html... it gives this error

  MuseJSAssert: Error calling function error: selector safety: cannot read property ' content 'document ' of 'HTMLIFrameElement': blocked a frame within the origin "null" access to a framework of cross-origin.

  If I had known what it means maybe I could fix it...

  It was only in chrome... IE works ok

  Yes, I think that will be the case.

  Click on publish. Test on Adobe hosting sites are free. It is literally one click on publish, choose a name for your test site and click OK. In seconds, you'll have a site on the internet.