Problems with auto-trace on After Effects. Continues to create a straight line

Similar Questions

• Problems with the installation/opening After Effects 7.0 Pro

  Good morning/evening. Can someone help me get my copy of After Effects (7.0 Pro) to run? When I try to run the program, in a first step, the screen goes black, causing me to have to use the Task Manager to close. When I do that, I get the error message that:

  "After that the effects cannot continue: Sorry, After Effects broke down." See /http:www.adobe.com/support/products/aftereffects.html for known issues. If you can't always solve the problem, contact Technical Support of Adobe (2).

  (0: 42) »

  On the second attempt, I am asked to enter my serial number (my name and my organization is already automatically registered) but when I hit ENTER, told me then:

  "After effects error: your serial number is not valid."

  (0 :: 3) »

  I tried to enter my serial number with and without a hyphen after each number 4 (ie: XXXXXXXX-XXXX-XXXX-XXXX etc.), and I tried the uninstall and repair the program, but to no avail (I am invited to insert the disc by repairing, even if the disc is already in the drive and the seconds after the start of uninstall AE, I get the prompt "the wizard was interrupted before After Effects 7.0 could be installed completely (even if I try to UNINSTALL).") Your system has not changed. To complete installation at another time, please run Setup again. "Since my product does not give me the opportunity to talk to someone on the phone, I have to post on the forums. If anyone has experienced the same problem and knows how to fix it, please help!

  FYI: I have a HP Pavilion 2000, Windows 8. If the additional pc specs are needed, let me know.

  If it's cs2, error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

• Problem with the installation of After Effects CC

  Hello

  I downloaded the trial version of Adobe after effects CC. As soon as I install, I get the following message:

  
  

  After effects error: current Crash. Last recorded message has been: 3940 > < GPU Manager > < 2 > Sniffer result Code: 3

  I have an i5 4440, 8 GM of Ram, NVIDIA NVS 315 graphics card and running on Windows 7 Professional (without SP1).

  What can be the problem? After Effects CS6 works very well and the first CC & CC hearing Edition. Graphics card drivers are uptodate.

  Help, please.

  Kind regards

  KapSin

  You must have Service Pack 1 installed. Many things will fail otherwise. That's what the system requirements.

• Some problems with HD treatment in After Effects movie

  Hi all!

  Composition of a movie, I need a little sophisticated for Premiere Pro color correction (the details are displayed in the first forum: http://forums.adobe.com/message/3064888#3064888)

  In a few words, I tried to do several layers of color correction to match the appearance of some clips filmed in different conditions.

  I had no problem with the creation of several layers and masking them as I wanted. However, what got me killed, film dimmed HD AE, so I had to put an end to the experiment.

  I wonder if anyone has experienced the same problem?

  I see a lot of halos of your film. This is usually a sign only in the technical sense, you overcranked your colors when the correction without regard for the valid 'safe» beaches These things can easily throw off encoders that use chroma sampling such as fact under all MPEG stuff. Aside from that I don't see much that would be bad, but do not forget that one) work from compressed images, b) stabilization already details kills by interpolation of pixels and c) all compression applied to the already compressed images will obviously make things worse. You, me, at least, everything is explainable and this isn't a problem with AE in itself, but rather the specific workflow. The only way I see to improve things is really work at the beginning of the string, and request the release / deartifacting filters before you do anything with images. which will minimize loss of pixel information when stabilize. From there, of course, change your methodology for correction of color to appear in these lines...

  Mylenium

• Problems with Dynamic Link and After Effects

  CS4 on Vista Ultimate 64. I recently worked on a project using the related dynamics AE comps and sequences first. Still seems to have a problem of transcoding DVD. I had to give up after several hours. I removed the comps AE project and the DVD set up fine with just the sequences of the body. I am inexperienced with AE then I guess I'm doing something wrong. Everything must be rendered before connecting a comp? Is there a limit to how many sequences and comps can be related to a project? I'm overloading my computer? I have 8 GB of RAM and 2.66 GHz Core 2 Quad CPU. Resource of the computer monitor shows always maxed out CPU and almost to the maximum RAM for transcoding in Encore (or to do anything whatsoever in AE)

  Why not ask such questions in the AE forum? Aside from that, using AE and DL organization at the same time can easily deplete all your system resources and can cause any kind of questions, as only one connection is supposed to exist at any given time. So it is certainly in the way in which you use, but not necessarily 'bad', just a miserable combination that makes impossible things.

  Mylenium

• Hi, I have a problem with a basic movement scroll effect.  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., he probably didn't unde

  Hi, I have a problem with a basic movement scroll effect.

  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., probably he did not understand what I wanted him, because English is not my native language, so one will try to be very clear on this one...

  Please note that I am new to dream, this is my first project ever.

  My idea is as follows:

  When the customer comes to our site of companies, he sees just our logo on a white background. the logo is composed of, say, four elements. When the client makes a scrolling down, the logo begins to transport: first the first part of the logo flies on the left side of the site, then the second part of the logo disappears down, then the third part of the logo flies to the right, then the fourth part of the logo flies upward and out of sight of customers. given what I've seen, it is possible to do...

  so...

  now I have four parts of my logo imported as png files in muse and was assembled in design mode to build our companies logo. I select each of the four parts and go to the effects of scrolling to the left tab next to the tab layers first I get the same values for each of the four parts: first movement: x 0 and x 0 again for the movement of the left and right; key position (t-handle): 0px; final movement: x 0 and x 0 for the value of left and right.

  now, I hit "Preview". : the logo is "pinned" to the correct location, I can scroll but the logo stays where it is. So far so good...

  now, I select all four components again and go to the tab scroll to 'final motion' effecs, I click on the drop down arrow and enter 1 x. I struck an excerpt...

  When I scroll the WHOLE grave logo down... well.

  NOW, I want the first part of the logo down, THEN part II to move left, THEN the third part to go to the top, THEN the fourth part to go right.

  so I select ONLY the first part, go to the request of scroll, to the 'final movement' tab, I click on the left arrow, then I go 1 x. (the value of up-down, I put to 0 again)... I struck an excerpt...

  the first part of the logo is left as soon as I start to scroll, the other three parties still go down at the same time...

  NOW, I want the second part of the logo to start to move, when the first part left, not at the same time as the first part.

  THEN I SELECT THE SECOND PART AND DRAG ITS HANDLE IN T (KEY ITEM) DOWN, LETS SAY: 200PX. THEN IT STARTS TO MOVE ONLY AFTER THE CUSTOMER HAS REACHED THIS POINT, RIGHT?

  BUT WHEN I SAW THAT *, THE LOGO IS NO LONGER TOGETHER, THE SECOND PART IS FLOATING ANYWHERE, BUT WHERE IT SHOULD BE... WTFF?

  short: when I move the t-handle, the initial position of the object changes. That's what I said to the adobe employee, but he said, this is the expected behavior...

  But if that's the case, how can I have my four parts correctly together, so they form my logo, but with different t treats, so they all start to move at different times?

  Pleeease help me, I will die of frustration here...: () this behavior is not normal, right?

  Thank you very much to everyone who reads this message and tries to help him...

  All the best,

  Niki Lapan

  I'm not good at explaining things that im going to download the file, I did for you. hope this helps you solve your problem

  https://www.mediafire.com/?xiild0yhr5cna7s

• Problems with word and PDF after computer crash. Error "user has access privileges."

  Problems with word and PDF after crash

  My computer crashed and I had to run the recovery disk, the repair option, so he could run again. It does not format my computer but I had to re - install several programs. I reinstalled my copy of office for example.  I have an external hard drive where I put most of my files but since installing the recovery disc, it does not open some Word documents and gives a message error "user has not access privilege." It's the same thing with some pdf files. What can I do?  Please help because I can't open some of my documents from the University.

  Hello world
  I would like to just say thank you for your help and the problem is now solved.  In the end I paid someone to sort it out.  He explained that it was something like permissions for some of my files were owned by my old operating system and after that my computer crashed and I had to put through the recovery disc these permissions have been lost.  He told me that he had a program that looked for the old existing and re-installed.
  Thank you.

• Problem with opening Windows store after upgrade to 8.1 Windows

  Original title: cant access window 8 app store

  I had a 8.1 window update to my laptop.but 8 window whenever I try to open appstore, I gives me error that cannot cannot to the authentintion, due to errors, .i tried to open AppStore 3 g, wifi and broadband connection.but I still get the same error.

  Help, please.

  Hello

  Please contact Microsoft Community. I understand that you have a problem with opening Windows store after the upgrade to Windows 8.1. I appreciate your efforts to solve this problem. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. are you able to open other Apps of metro?
  2. What is the full error message?

  This problem might have occurred because of these reasons:

  1. Corrupt the App Store.
  2. Incorrect settings App.
  3. Corrupt system files.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest to try the procedure described in the article to reregister the App Store and check if that helps.

  http://blogs.msdn.com/b/notime/archive/2013/10/21/10458031.aspx

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  Method 2:
  If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Having problems with Adobe Suite C. after the upgrade to El Capitan on an iMac?

  Someone at - it problems with Adobe Suite C. after the upgrade to El Capitan on aiMac? What did you do about this? What helped?

  In case you downloaded the Apple Stroe Yosemite, it always can be downloaded in the section of your account purchases.

• I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

  After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

  A few external links to help you set permissions:

  MAC

  OS X Yosemite: set permissions for items on your Mac

  WIN

  Set, view, change, or remove permissions on files and folders

  r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

  Kind regards

  Ashutosh

• I have installed Adobe Audition on my pc but I have a problem with the time and the effects of pitch appear unavailable

  I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not

  My guess is that you are in multitrack view and not editview

  These fx are destructive and only take effect when you change a single audio file in editview

• I have a problem with a graphic refreshing after its related data provider changes.

  I have a problem with a graphic refreshing after its related data provider changes. After calling the subsetHighLowData.refresh () I expect the table to redraw, but he looks always the same. I even checked the debugger to see if the range had occurred and he had.
  
  Ideas of friend codes?

  "nikos101" wrote in message
  News:gib6aa$PRR$1@forums. Macromedia.com...
  > I have a problem with a graphic refreshing after its related data provider
  > changes.
  > After calling the subsetHighLowData.refresh () I expect the graph
  > to
  > redraw, but it still looks like the same. I even checked the debugger to see
  > If
  > the slice took place and he had.
  >
  > Any ideas friends coding?
  >
  > subsetHighLowData.source =
  > highLowData.source.slice(slider.values[0],slider.values[1]);

  Just use the removeItemAt collection ArrayCollection, and it must handle the event
  a distribution for you.

  HTH;

  Amy

• "After effects WARNING: cannot create file library/preferences/Adobe/After Effects/13.2/dummy. ???

  The error message I recibed. Please help me

  After effects WARNING: cannot create file library/preferences/Adobe/After Effects/13.2/dummy

  fix the permissions problem that prevents starting applications Adobe | After the effects of interest area

• iPad2 and problem with the SIM card after update

  even after the 9.3.1 last updated continuously having problems with SIM TIM card network.

  I changed and I tried with another SIM card but the problem remains.

  I did have all those problems with 9.2.1.

  Apple could intervene and solve these problems? Otherwise, I think it's better to make a return to the old 9.2.1.

  Thank you

  Do you see the network? and is it strong enough?

• Problem with list of customers after 1.02.11 WRT160N wireless firmware update

  I have just updated the firmware on my WRT160N to 1.02.11

  When I go to wireless-> Wireless MAC Filter, click list of wireless clients, I get a blank screen for the most part, and then my Internet access to the router no longer works. for example, I can no longer connect to the router via a browser.

  The router continues to work for cable customers and wireless, but the router web access does not work.

  I need to display the wireless clients because I'm having intermittent problems with my new Ipad to connect.

  Someone saw what is wrong?

  You have already updated the firmware of the router.

  After upgrading the firmware on the router, it is recommended to reset and reconfigure the router.

  Connect computer with the Ethernet cable to the Ethernet port on the router.

  Hold down the button for 30 seconds rest.

  Release the reset button wait 30 seconds.

  Cycle power to the router.

  Open the page of the router and configure your router settings manually.