Problems with exp util

Similar Questions

• Satellite A500-1HK: some problems with ECO Utility, touchpad, GPU

  Hi all!

  I am facing some problems with my laptop A500-1HK AND I would like to have your opinion!

  last month, the eco Utility application cannot be activated from the special keyboard of the botton at the bottom of the keyboard, although Ihear special sound because its touch botton (so it works fine). I can activate only in the start menu and then the botton in the keyboard touch would become green.

  At the top of the touchpad (mouse), there is a botton that enable / disable the touchpad. It works again.

  A few times when I'm working, the screen turns black and then after 5-7 seconds, that it becomes normal with a message that nvidia GeForce GT 330Μ had stop working but now works well! (is it something serious?)

  On the taskbar, there is an icon with a yellow exclamation point indicating the function that intel RST does not work. What is c?

  Keep in mind I have install all the drivers to the latest version, but nothing has changed! I have windows 7 64 bit GR

  Thanks in advance!

  > last month, the eco Utility application cannot be activated from the special keyboard of the botton at the bottom of the keyboard, although Ihear special sound because its touch botton (so it works fine). I can activate only in the start menu and then the botton in the keyboard touch would become green.

  Go to-> programs and features Control Panel
  Here are looking for ECO Utility and uninstall this software and restart the laptop

  Then visit the Toshiba UE driver page and look for the ECO utility.
  Download the software and reinstall it.

  > A few times when I'm working, the screen turns black and then after 5-7 seconds, it becomes normal with a message that nvidia GeForce GT 330? a work stoppage, but now works fine! (is it something serious?)

  The same as the ECO utility. Uninstall the screen / graphic card driver
  Download the latest driver from the Toshiba page and install it

  > To the task bar, there is an icon with a yellow exclamation point indicating the function that intel RST does not work. What is c?

  TSRI means Intel Rapid Storage Manager. It contains the SATA driver for SATA HDD controller.
  In case this does not work, reinstall it again.

• Strange problem with flash.utils.Dictionary

  I have problems to work with a class AS stretching from dictionary. Here is a small code snippet that represents my problem:

  package
  {
  import flash.utils.Dictionary;

  
  

  SerializableAttribute public class DI extends dictionary
  {
  public void DI (weakKeys:Boolean = false)
  {
  Super (weakKeys);
  }
  
  public function setStuff (): void
  {
  var d: Dictionary = new Dictionary();
  var key: String = "CreationClassName";
  var val: String = "D13BCOR1";
  d [key] = val;
  Item [key] = val;
  trace ("key/val =" + val);
  }
  
  }
  }

  Note that the line

  d [key] = val;

  works very well.  However, the line following

  Item [key] = val;

  gives me a runtime error:

  ReferenceError: Error #1056: cannot create property CreationClassName on DI.
  di / setStuff ([C:\jberry\workspaces\rnx\ActionScriptTest\DI.as:18])
  at ActionScriptTest() [C:\jberry\workspaces\rnx\ActionScriptTest\ActionScriptTest.as:9]

  Y at - it a different syntax than what I use to fix a combo of key/value for a class that extends the dictionary?

  FYI, the code that calls him above looks like this:

  public void ActionScriptTest()
  {
  var di: DI = new DI();
  di.setStuff ();
  }
  

  Thanks in advance for any advice/suggestions.

  Joe

  Try the public dynamic class DI.

  Make sure that the dictionary is not "final".

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Problem with disk utility...

  After upgrading to Mac OS Sierra custom poster disk utility looks like more detailed information about what is on my Macintosh HD, only a blue strip for the used area of the disc and the white for the empty area. Any suggestions?

  Try to fix permissions of drive with disk - Apple Support utility

  Ant then reset the management system (SCM) controller on your Mac - Apple Support

• Problem with by utility SlimWare FixCleaner

  I bought FixCleaner by SlimWare Utilities. It is therefore disappointing that my computer crashed immediately after that I used it. I contacted them, but there was no answer. Fortunately, there are online support. I asked for help, but found that it's the robot automatic answer. How can I get my money back?

  OH my, I had the same problem before, software could not fix my computer errors effectively, I was disappointed by the software and the company, they are cheater, I couldn't get my money back until I went to the Bank and get them through the store service. You can recover the money from the Bank and hopely never use again. and I recommend all friends don't use it ever and ever to buy them.

• Portege R500: Profile Migration and a problem with the utility of fingerprints

  Hello, here have done an upgrade of Windows (Vista to 7).
  To be more precise - I installed x 64 version, so I had to do a clean install.
  After the instalation I partially copied my old profile to the new structure.

  When I'm trying to enroll fingerprint for the prints stored on the old system there is an error that already exists in this schema, but store the new works correctly. I am not old fingerprints for the management, or export them - it is possible to clean this memory of the tools?

  See you soon,.
  Radek

  Hi hcsradek,

  try to clear all of the fingerprints...
  remove all visible zeros and restart...
  If you're lucky, the other stored where went too!

  I don't know if a tool exists to make this work...
  If anyone has such a tool which can only be a servicepartner...

• Problem with EMP 11.1.2.3 of planning CalcMgrCmdLineLauncher utility

  Hi all

  I have a BRTest business rule in planning of EMP 11.1.2.3 which requires a prompt (lets call it inputPrice).

  I created 100 xmls for 100 inputPrices. Now when I call the CalcMgrCmdLineLauncher utility to run BRTest from 1 xml until the end, it gives the following error at the 70th xml.

  "The input line is too long.

  The syntax of the command is incorrect.

  I checked if there was a mistake with the 70th XML, but I have not found any problems with it. Also, to be sure, I ran my lot to call the CalcMgrCmdLineLauncher from 25th xml, then it gave the error above 95th XML.

  So, it has something to do with the number 70. It seems that there is a character limit on passing command line arguments via a java utility. I tried increasing buffer size and number of buffers of the command line options. But it did not help.

  I tried a number of things. Can someone please help me and let me know if they have experienced this problem and what is the resolution. Do not worry about the CalcMgrCmdLineLauncher! If someone did this issue at the launch of all java code from command prompt and how they have solved it.

  Thanks in advance for all the help and time.

  Best regards

  Jayant sami

  Found a solution by using the Support of Oracle.

  CalcMgrCmdLineLauncher adds following 2 lines to the PATH environment variable, at the launch of the business rule.

  D:\Oracle\Middleware\EPMSystem11R1/bin;

  D:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;

  Well, there no error checking if these places are already present or not. So, either manually add these 2 sites of PATH variable and comment out the part that makes the part above. Or, a better solution would be to modify the code to check whether or not these places is present in the PATH variable. If this isn't the case, then add locations.

  I hope this solution helps if you experience this problem.

  Best regards

  Jayant

• I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

  I have a problem with the canon 5dsr with Lightroom 6 connection

  I can't drop images directly in Lightroom

  The camera connected only by EOS utility

  Help, please

  Hi mateuszm,

  You cannot drop images directly in Lightroom.

  You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

• Problems with the windows troubleshooting utility. Error code: 0 x 80070002

  Original title:

  Problems with the windows troubleshooting tool

  Whenever I run the Troubleshooting Guide for things like a problem of wireless network I get this error

  An error occurred during troubleshooting:
  An unexpected error has occurred. The Troubleshooting Wizard can not continue.
  Identifier of the package: PeformanceDiagnostic
  Path: No Local package
  Error code: 0 x 80070002
  Source: engine
  User: SCOTTSLAPTOP\Scott
  Background: high

  Hello

  1. the problem occurs with all the troubleshooters you trying to run?
  2. why you try to run the troubleshooter?

  3. Since when are you facing this problem?

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an inplace upgrade.

  You can try to do an inplace upgrade and check if this gives a probable solution.
  Check the following link to see how to perform an inplace upgrade.
  http://support.Microsoft.com/kb/2255099

  I hope this helps.

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.

• Would be switching to a simultaneous dual‑band 802.11n AirPort Express correct problems with connectivity MacBook Air Wi - Fi

  Right now I use an old AirPort Express Terminal (802.11 DSSS 1 and 2 Mbps standard, 802 11A, 802.11 g specifications and a 802.11n draft specification) with AirPort Utility Version 6.3.6 (636.5). My MacBook Air (13 inches, beginning 2014) intermittently loses the Wi - Fi connection. Move to a 802.11n simultaneous dual‑band AirPort Express would correct this problem? I'd be better off with an Airport Extreme?

  AirPort Express frequently asked questions (FAQ) - Apple Support

• Problem with SlingTV through Airport Extreme?

  I have a Motorola SB6141 cable modem, internet of Time Warner and an Apple Airport Extreme Base Station (later) for my setup. While SlingTV is not a great service, it was $ 20 a month and gave me what I need and has been much better than that Time Warner was in charge me for the same channels.

  Despite the problems of freezing SlingTVs or what not, for a while it worked. But one day a few months back it just stopped working. When you open the app, it either does not open or just turns and turns to be forgotten and never access the content. But if I try on my phone (Verizon LTE), or another network outside my apartment with the iPad or computer laptop, it works. So at home, I tried to go directly from the cable modem and right in the Apple TV (previously an Xbox) and when I do that it works. So really what it boils down to, is my Apple Airport Extreme Base Station router. If I'm either directly connected to the Airport Extreme Base Station (Apple TV ethernet to the router), it will not work, or if I use WiFi via the Apple Airport Extreme Base Station it will not work. But directly to the modem cable or on any network outside of my home, the service works.

  So in short, something about setting up Apple isn't allowing the Sling TV app to open or work on any device. I even did a rest of the plant and installing my Apple router once again, and the same problem persists.

  FYI - I use Netflix, Amazon Prime, Hulu and all the Apple TV, TV shows, rental movies and content without ever having a problem with opening or streaming. This only happens with SlingTV when you try to access content on any device (iPad, Apple TV, Xbox One, iPhone, Macbook Air) via WiFi or Ethernet via Apple Airport Extreme.

  I tried to provide all the little details that I could. If someone could please provide a solution I would really really appreciate it! Thank you.

  Well first of all try to port forwarding. Slingbox I guess would use a similar to SlingTV montage... Unfortunately when I google for it I see just people having so many questions like you... no rigging, no answer they give up.

  http://PortForward.com/English/routers/port_forwarding/Apple/AirPortExtreme/Slin gBox.htm

  It is the old airport of model, but the idea is correct.

  If you still have questions... There is a major problem... port 5001 is used by the airport for its installation...

  If I run a scan of port of network utility, that you will find that it is already used.

  Port scan started...

  Host port scan: 192.168.2.201

  Open TCP Port: 5001 commplex-link

  Open TCP Port: 5009 winfs

  Port scan has completed...

  My recommendation is to replace the airport as your main router... Something good market like the C5 TP-Link or the WR1043ND which is less than $50US. These routers use UPNP is missing on the airport. Continue to use the airport for your customers to apple as WAP and switch.

  BTW: this is no bad thing because you also have a known problematic modem... SB6121 and SB6141 have major problems... do a quick search and you can find a lot of posts about this.

  TWC has also now use IPv6... that can ruin.

  See the instructions for installation (same as comcast for TWC).

  http://mydeviceinfo.Xfinity.com/download.php?file_id=35

• I can't access some websites using Firefox. For my own site, I get "file not found". My Yahoo downloads in the form of text. No problems with browsers IE or Chrome

  I can't access some websites using Firefox. Pages say "File not found" or in the case of Yahoo and Facebook, they resemble the on-screen text files. No problems with my computer and it is not the case with my browsers IE and Chrome. Already deleted and reinstalled Firefox and it has not solved the problem

  You can also do a check of malware with some digitization programs of malicious software on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Problem with XServe and XServe RAID via Fibre Channel

  Hello everyone,

  I have a problem with my blended Xserve RAID.

  I see in RAID-Admin and configure it successfully (via Ethernet). Connect with our Xserve via Fibre Channel, but the XServe and XServe RAID do not detect each other.

  The fiber on the Xserve channel LEDs are white on the Xserve RAID completely off and permanent.

  RAID-Admin status of Fibre Channel: 'No connection (1 table)' with a red square.

  If I try to open the utility of fiber channel I get the message: "card Fibre Channel is not found." Utility disk OS X can't, too.

  I changed the card connector cable, and made several reboots. But each time the same thing: they do not detect each other.

  Xserve (2009):

  -2.26 GHz Quad-Core Intel Xeon 5500

  -Map of Apple dual-channel 4 Gb Fibre Channel (LSI7204EP)

  XServe RAID:

  -RAID 5 in an array (only on the left with 5 x 500 GB)

  -1.5.1 Firmware

  -Cable Apple 4 Gb SFP - SFP

  Thanks for your help and sorry for my bad English!

  Hi Mpm-Mainz,

  Check if you have enabled LUN masking. To be able to see, you will need to download raid admin 1.5 not the 1.5.1

  Xserve RAID Admin Tools 1.5

  Have you also tried to use the other controller? Even if there is no disc in there, then it should appear in the preferences of fiber card system.

  Thank you
  Owen

• Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

  Hi all

  Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

  Here are the specs:

  1 Macbook Air 11.5 "running on El Capitan (10.11.1)

  2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

  Before the accident yesterday, it was working OK.

  Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

  I can assemble and disassemble a USB stick very well.

  Any help would be appreciated.

  Thank you!

  Maybe you can explain a little better.

  I would like to make some general comments before having your replay.

  It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

  For TM, the rule is that the drive is about 3 times the size of the boot disk.

  Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

  I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

  Have another drive formatted NTFS for Windows.