Portege R500: Profile Migration and a problem with the utility of fingerprints

Similar Questions

• I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my Applications

  Please refer to I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  (Double Post)

• Firefox and serious problems with the police on the websites bloglike.

  Firefox on my computer has some serious problems with the police on some sites, such as: twitter, tumblr and a few other bloglike.

  Images:
  Twetter / thumblr / other

  Yes, it is more likely a hardware acceleration problem or a problem with the specific fonts (rendering).

  You can do a test of fonts to see if you can identify the corrupted fonts.

  • http://BrowserSpy.dk/fonts-Flash.php?detail=1

  You can use this extension to see what fonts are used for the selected text.

  • FontInfo: https://addons.mozilla.org/firefox/addon/fontinfo/

• Just bought Wndows Vista and having problems with the port for Palm 125

  I just bought a Windows Vista-based computer and have problems with getting my 125 Palm to synchronize with the desktop computer.  I get an error message saying: "No available Com1" what should I do?

  Thank you

  Frustrated

  Don't ask me the procedures step by step that I did, but I finally success!  I uninstalled Palm Desktop and started from scratch.  I unplugged the Hot Sync cradle by the USB port, then I installed Palm Desktop from my drive and then update Palm Desktop on the Palm for Palm M125 site.  It still does not, I manually added a port and manually changed to COM1.  I then pressed the Hot Sync button and in the Device Manager, a folder has become available "device named" with Palm Desktop as a subfolder.  It is always active, I updated my computer for Palm USB driver.  Miraculously it worked.  Thanks for your help, but as usual everything it needed, it was patience and trial and error to solve the problem, since it does not seem to be a quick fix related this topic.

  Message relates to: Palm m125

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Webview from landscape orientation to portrait mode causes the font size to become smaller and a problem with the context Menu

  Hi, I have a webview with inline html. It works fine except that when I pass in landscape mode, the screen fills fine and the police grows, but when I go back to portrait fonts are tiny, even smaller then when initially in the portrait. I am installing this on a Z10 with cascades 10.1 SDK. Is this a Bug somewhere in the SDK or BB10?

  Another problem I have is in Web mode, the shortcut menu appears when I touch a Word. I is no need to use the context menu. How can I get rid of him. In the case where I would like to someday use this menu, I would need to add code to it. I can't find the code. Where can I find it?

  Thanks for your help

  Concerning

  Roland

  I' to propose taying far WebView as much as possible and using TextArea (with type HTML). There are still a few bugs present in WebView that make it unpleasant to use.

  You cannot get rid of the context menu, so it will disappear once you remove WebView. You can still share with other methods.

  This may seem more work and it's probably, but it's going to do to improve the user experience and fewer headaches for you.

• Fixed the pc and now problems with the operating system.

  So a few weeks ago I had replaced my motherboard fried and all the rest. Windows claimed to resurrect my computer, my copy of Windows 7 is not legitimate and does not accept my product key. Any advice on how to fix this?

  If your license of Windows 7 comes with the previous motherboard, it is not transferable to a new motherboard.

  If it is a license upgrade of retail that you bought in a store, the motherboard, you take a match it must have a previous qualification licence.

  You can also try the following:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Unable to connect to the internet and have problems with the help of program network Toshiba

  Original title: I can't go on the internet?

  I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

  Hi Alice,.

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You are unable to connect to internet and unable to use a Toshiba network program.

  1. what browser do you use?

  2 are you able to open other sites?

  3. Once you get a white page?

  4. do you get error messages when you try to open the site to the Bank?

  5 did you do changes on the computer before the show?

  6. who is the program of Toshiba network you're talking about?

  To work the issue with cannot connect to the internet:

  Method 1:

  See the site:

  The problems of Internet connection

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

  Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

  To work the issue with Toshiba program:

  Method 2:

   

  Reinstall the boot program:

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the program

   

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Install the program

   

  If the problem persists, then you try to get help on the Toshiba forums site:

  http://forums.Toshiba.com/

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

• Select and mask | Problems with the selection in the process of disappearance - CC 2015.5

  Hi all!

  I've just updated Photoshop 2015.5 CC version.

  I am currently working on a design that needs cutting contours.

  So I picked all the areas belonging to the background of the image and then click on the "select and mask" to refine the edges and then clear my selection as I usually did.

  But instead, my selection disappeared...

  My steps were:

  1. Selection of the areas to clear with "themagic wand tool.
  2. Click on 'select and mask' (output parameters: output to the selection).
  3. Click on 'OK'.
  4. Selection has disappeared!

  I have provided all the tools to their default settings, but nothing has changed.

  I tried to close and reopen the case, repeat the steps to delete the background, but I always feel the question.

  It is a big problem for me!

  I hope that there is someone who could help me/us with this!

  Best,

  Joanna

  I actually asked the new workspace me first thing after update, because I wasn't getting.  It's different enough that you need to learn everywhere, I'm afraid, but it is definitely an improvement when you become familiar with it.  See Julianne Kost guide below, but I suspect that you may need to adjust the sliders that control the opacity of the background.  Or simply click on the transparent part to start the selection.

  

  Select and mask "Julieanne Kost's Blog

• I have a question if someone is there. I have build an interactive site and have problems with the presentation widget?

  I am creating an interactive website for a client developer. We are eager to build an interactive site where a potential buyer can see the rendering of the image of the kitchen and choose different finishes (floors, counters, backsplash ect.). I use the widget presentation stacked for interactivity. For example, the cabinets are all in a widget. The second widget contains the upper part of the counter. The third widget will contain the floors. All targets of widgets are stacked with various components of rendering and triggers are more towards the left to graphically create a kiosk. I have a question when I look in a preview of the browser. Sometimes the trigger buttons work and some times they do not have. They don't seem to be any rhyme or reason to it. I need help! Someone has an idea?

  Thank you

  DJ

  DjElohim03 wrote:

  Is it possible that I could put all my layers on top of the original kitchen render and use States to reversal or clicking to give me the functionality I need?

  Demo host

  You must understand that triggers and targets are different... the triggers can be inside the goals as long as they do not belong in other triggers

• Problem with the Manager of fingerprints

  Hello friends,

  I recently bought a T450s and fingerprint Manager Pro software gives this error whenever I try to run it:

  "Windows Biometric support must be enabled to use this application. Activate the biometrics integrated in the control panel.

  Things I did (without result):

  (a) I tried to seek the so-called biometrics in the control panel. Unable to find anything there or in Device Manager...

  (b) I searched online. I found a suggestion to change a file 'gpedit.msc' (find the policies of biometrics and allow it). I did and it still gives me the same error.

  Any suggestions on what I can do to fix this? I really want to use fingerprints instead of passwords on Web sites username.

  I'm on Windows 8.1 btw.

  See you soon,.

  Update: the program manager of fingerprints was missing a file (wbf.dll). Uninstalled and reinstalled and everything works fine now.

  Bravo to Lenovo Support!

• Problems with the internet connection, Aspire V15 - V3 - 575G

  Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

  The problems are the following:

  • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
  • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

  He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

  I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

  Thank you very much for the reply.

  Plese try this:

  device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

• my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

  computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

  To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
  Help would be much appreciated?

  Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

  Thanks for the effort though...

• Windows 8 "There is a problem with the driver for bluetooth hands-free audio"

  There is an X symbol by the sound icon, when clicked, it shows "There is a problem with the driver for the audio blue tooth hands-free". Troubleshooting has not been set, said that there is a bluetooth hands-free audio driver problem. In addition, when you look at the audio in Device Manager, error code 19 lights during all the points listed under ' audio, video and game controllers ".

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted audio driver or settings.

  I suggest you run this Microsoft fixit and verify.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  I would also say that you uninstall and reinstall the sound drivers under "Audio, video and game controllers" and check.

  To uninstall the driver, please follow these steps:

  a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.

  b. Click to enlarge "Audio, video and game controllers", right click on the device, and then click Uninstall.

  c. restart the computer.

  Now, reinstall the drivers from the computer manufacturer's website and check the.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Portege R500 fan turns and freezes

  Hello

  I have a Portege R500 running windows XP. I seem to have problems with the fan turns very quickly upward and the laptop then freeze it. It sems happens especially when I remove the Cat5 network card and turn on the wireless network card. Toshiba have replaced the Module of cooling for me. I don't know if the problem is hardware or software, the problem sometimes at random, but as above especially when you remove the Cat5.

  Any help would be appreciated.

  Thank you

  This Toshiba recovery image or self created image this image that you use?
  If you have noticed this problem with own laptop preinstalled (Toshiba recovery image) I don't think that it is software issue.

  Did you speak with service days? I mean they should have enough experience with this model of laptop.