Problems with graph XY 'forget' field properties

Similar Questions

• Problem with class extend the field

  Hi all!

  Now, I have a problem with the class extend the field:

  public class ContentItem extends field

  {

  have a bitmap and text

  }
  Public MustInherit class ContentField extend the field

  {

  protected abstract void paint (graphics graphics);

  protected abstract void drawFocus (Graphics graphics);

  }

  SerializableAttribute public class, contented extends ContentField

  {

  have a lot of field ContentItem

  and painting ContentItem field depending on the paint and drawFocus

  }

  I'm having a problem when I want to focus to ContentItem. How to focus to ContentItem class content. Please help me.

  Thank you, it has been resolved. I just override the navigationMovement method and treat it in the child field

• Problem with Simple Contact form fields do not come into the home.

  Hello

  The form of a Simple Contact on our site is not letting users enter their names and e-mail addresses.  The other fields for cell phone and Message are working well.

  I though this might be a problem with the hosting, but the site is hosted on Business Catalyst (badfishy.businesscatalyst.com).

  I created other test sites and insert the Simple Contact form which worked perfectly, so I'm not sure what I did to the main site to cause this problem.

  Any help would be appreciated muchly.

  See you soon

  Ben

  Hi Ben

  I checked the site and it seems that the frame of the accordion is extended to the covering page so 2 fields in form because of which fields are not active because they are behind the plot of the accordion.

  Please reduce the accordion framework such as the fields of the form are not behind the frame and then it should work.

  Thank you

  Sanjit

• Problem with SEO and the field temporal businesscatalyst

  Hi everyone¡¡¡I´m of problems with a Web SEO site, which is indexed by google fist in area regular businesscatalyst by the direct field temporal. I would know, it would be possible to remove the Web site from time businesscatalyst in the catalyst business Panel? How? ¿ ? , I find the option redirect.

  I m afraid on the posibility, google plans to my website online text repited for this reason.

  Thank you everyone¡¡¡

  Go to the domain manager in the admin.

  Click on the URL of development (yoursite.businesscatalyst.com) and there you will see a tick box stating to redirect to your homepage. Check and save.

• Trying to solve a problem with the list under display properties screensaver!

  When I try to put my screensaver, gout dwon displays a completely blank entry followed by (None) & the list of available screensavers.  Every time I choose (none), it is up to the last installed screen saver.

  An example: the last installed screen saver was ArcSoft Photobook screensaver.
  So, when I select (none) for no screensaver, it is up to the ArcSoft Photobook screensaver.

  This happens each & everytime I have add a new screen saver.
  (None) option always returns to the last screen saver installed.

  There are moments that I need the option screensaver set to (none).

  Any ideas on how to fix this problem would be greatly appreciated.

  Ed

  Not sure as to what I did, however, my problem with the screen saver has been fixed.

  I've been messing around with a number of things that I thought might have caused this problem.  And wala, suddenly the problem existed no more!

• Two problems with the Acrobat DC text properties

  Since the switch to Acrobat DC, I have two questions, I have not been able to solve on my own.

  I can't change the default color of text in a text box in Acrobat DC. I chose "Text box add", type something in the box, choose 'Text properties,' change the police, size, and color, right-click from the edge of the area, then 'Create the current properties default.' It worked with Acrobat Pro, but with Acrobat DC it doesn't. The text I changed red returned to black. The other properties are OK.

  In Acrobat DC, I added the properties of text for quick access, but it does not work there. I highlight text, click text properties in the Quick Access toolbar, and nothing happens, but if I click on the text properties on the toolbar to comment, then the menu drop down appears and I can change the properties. I don't want to have the opening of the toolbar of comment, too much space on my screen.

  Hello

  We have released an update today that solves both of these problems. Please open Acrobat or Reader DC and visit help > check for updates to ensure that you are on the latest patch.

  Details on the release: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-02-2016.html

  Please let us know how it goes.

  Thank you

  -ashu

• problem with validation in the field with the radio button type in create profile jsp page

  Hello

  Kindly help me with the validation of a field with the type option button in the createProfile jsp page. Its actually not to validate the sex with radio button field.

  The code is as follows...

  < % @ page language = "java" contentType = text/html"; charset = ISO-8859-1"

  pageEncoding = "ISO-8859-1" % >

  <! – this taglib used to access dsp tags - >

  < %@taglib uri = "" / dspTaglib "prefix ="dsp"% >"

  < dsp:page >

  < dsp:importbean bean = "/ atg/userprofiling/ProfileFormHandler" / >

  < dsp:importbean bean = "/ atg/dynamo/drop/ErrorMessageForEach" / >

    <! DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN" "http://www.w3.org/TR/html4/loose.dtd" > ""

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > < /title > user registration Page

  < / head >

  < body >

  < dsp:form id = "registerForm" method = "post" action = "registration.jsp" >

  < div >

  < div > if please fill in all fields below and click Save

  button. < / div >

  < br / >

  < table >

  < tbody >

  < b >

  < td width = "150" > name < table >

  < td > < dsp:input bean = "ProfileFormHandler.value.firstName"

  MaxLength = "30" size = "25" type = "text" required = "true" / > < table >

  < /tr >

  < b >

  Last name < td > < table >

  < td > < dsp:input bean = "ProfileFormHandler.value.lastName"

  MaxLength = "30" size = "25" type = "text" required = "true" / > < table >

  < /tr >

  < b >

  < td > username < table >

  < td > < dsp:input bean = "ProfileFormHandler.value.login"

  MaxLength = "30" size = "25" type = "text" required = "true" / > < table >

  < /tr >

  < b >

  password < td > < table >

  < td > < dsp:input bean = "ProfileFormHandler.value.password"

  MaxLength = "30" size = "25" type = "password" required = "true" / > < table >

  < /tr >

  < b >

  < td > confirm password < table >

  < td > < dsp:input bean = "ProfileFormHandler.value.password"

  MaxLength = "30" size = "25" type = "password" required = "true" / > < table >

  < /tr >

  < b >

  Identification of Email < td > < table >

  < td > < dsp:input bean = "ProfileFormHandler.value.email"

  MaxLength = "30" size = "25" type = "text" required = "true" / > < table >

  < /tr >

  < b >

  Sex < td > < table >

  < td > < dsp:input bean = "ProfileFormHandler.value.gender"

  Type = "radio" required = "true" > male < / dsp:input > < dsp:input

  Bean = "ProfileFormHandler.Value.Gender" type = "radio" "

  required = "true" > female < / dsp:input > < table >

  < /tr >

  < b >

  < td colspan = "2" > < dsp:input bean = "ProfileFormHandler.create"

  Type = "submit" value = "Save" / > < dsp:input

  Bean = "ProfileFormHandler.createSuccessURL" type = "hidden"

  value = "index.jsp" / > < table > "

  < /tr >

  < b >

  < td colspan = "2" >

  < ul >

  < dsp:droplet name = "ErrorMessageForEach" >

  < dsp:param bean = "ProfileFormHandler.formExceptions"

  name = 'exceptions' / >

  < name dsp:oparam = "output" >

  < li > < dsp:valueof param = "message" / > < /li >

  < / dsp:oparam >

  < / dsp:droplet >

  < /ul >

  < table >

  < /tr >

  < / tbody >

  < /table >

  < / div >

  < / dsp:form >

  < / dsp:page >

  < / body >

  < / html >

  Use code next, may be you do not value attribute set and causing a problem (data inconsistency problem) or case mismatch while storing data in the repository.

  <%Boolean checked = true;%>

  Sex:

  Male

  Female

  I do not know what will radio back button if the value is specified: a boolean value or the value aim to display (in your male cases),.

  If the problem is fixed, undo the change and please let me know what value he sent in your case.

  Please

  Thank you

  Nitin.

• Satellite L500-1UR - problem with graph

  Hello

  I have a Satellite L500-1UR, with 64-Bit.

  After a Windows Update my Board Graphic is broken. I have only a standard screen.
  I can only switch between two different resoultions (1024 x 768 or 800 x 600).
  Previous I have something with 1300 x 768.
  I mind uses the previos driver more.

  Is my graphics card Mobile Intel (r) 4 Series Express Chipset Family.
  When I refresh the driver nothing happen.

  Under the support of properties, that signature digital can´t be proved.
  Code 52. I do a system recovery.
  The early days, it was like before, but after another windows updated failure even reproduce.

  And now I can´t do another more recovery system.

  Please someone help me, I'm desperate.

  Concerning

  Hello

  Unfortunately, I can't explain what happened exactly with your machine. Maybe you have installed all the updates available (important and optional). Maybe the display driver has been offered as a driver in option.

  In any case, what you can do now is follow:
  -try to roll back OS to an earlier time using System Restore option
  -Reinstall the display driver - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  -in the worst case, you can reinstall OS HARD drive recovery option (I hope it works)

  If you have any other questions you are welcome.

• Problems with graph and my program of refining.

  Hey there guys.  I am very new to the use of LabVIEW.  This is actually my first fully functional program, and I had some questions about some of the subtleties.  The program works just how I want. It starts and sends a signal to a power supply, turn it on.  Then 4 thermocouples are measured in a while loop until a specific temperature (defined in 30 c right now so I can stop the program with my hand). Temperature of the five readings are averaged together to smooth curves.  The readings are post on the thermometer read outings as well as graphically.  Once reached the temperature limit programs to end the while loop and a stop signal is sent to the power grid.

  Everything works so you may ask while I'm here.  Well first off I have the impression that the way that I used a sequence to activate the power supply market is kind of chunky and wanted to see if there was a simpler way.  Also, I tried to add a Boolean value LED to indicate that the heating element is disabled or enabled, but could not figure out how to add it.  Also, I was wondering how to get my x-scale from 0.  Currently, I have the relative time, but it starts from about 3.4 billion and has every second there. This can be seen in the jpeg below.  Also is it possible to add a grid to a waveform graph?

  Well thank you for your help and all you offer is much appreciated.

  kgould wrote:

  Also, I tried to add a Boolean value LED to indicate that the heating element is disabled or enabled, but could not figure out how to add it.  Also, I was wondering how to get my x-scale from 0.  Currently, I have the relative time, but it starts from about 3.4 billion and has every second there. This can be seen in the jpeg below.  Also is it possible to add a grid to a waveform graph?

  OK, here are a few suggestions.

  • To indicate or not running, you could just reverse the value going to the stop condition and post it in a Boolean indicator.
  • Set the X-scale of relative time format.
  • Your loop runs at about 2 Hz (samples of 5 to 10 Hz), so you must assign the rung of the ladder x 0.5.
  • This song and dance with dynamic data seems ill advised. I would use probably low level functions of data acquisition instead.
  • Do not duplicate all these functions on average, use a loop FOR.
  • Use a cluster for the chart and thermometers: simple diagram.
  • Note that at least an entry to the "stop" function type must go through the loop to make sure that the function waits until the loop is completed.
  • To add a grid, change the property for the scales and select an opaque color.

  Here's a quck project. Maybe this can give you some ideas... (I did not in place more low level DAQ functions yet)

  There are probably a few little bugs. Make sure that the dynamic data in table 2D are configured correctly.

  (Part of the sequence is currently necessary because the GPIB Subvi is not an output (I don't have the VI!).) This ensures that it ends before the while loop begins. He's probably a 'mistake' that you can wire to the edge of the loop, eliminating the frame of the sequence).

• Problem with the calculation of field

  To create a calculated field. Clicked on Pike. The field selection screen will allow me only to choose Select All won't let me choose individual fields

  Use the SPACEBAR to check the individual box of a field or click a little

  on the way to the center of the box. This is a known bug.

  The game, February 4, 2016 to 20:48, brecka20053206 [email protected]>

• Customer problem with graph

  Is it possible to improve graphics performance on the workstation with the RDP Protocol?

  We have HP t5540 clients (Windows CE) light with 1 GB of RAM, View4.5 and Win7x32 VMs. watching videos on Youtube for example is very hard, video and sounds are terrible. Is it possible to improve, for example on the thin client or view or vsphere VM...?

  Thanks to all the advice

  Ask your supplier for a demo of a teradici PCoIP zero client device and you will be amazed at the easy use and the speed of these devices!

• frustrating problem with a dat/time field

  I'm pretty new to this tool (LiveCycle) - once more to try to modify/create a pdf form on very simple writing

  I inserted 2 fields of date time. I have a correctly configured automatically insert the current time, when the form is opened so the user does not have to do... ;

  The following field must be a time field so that the user does not enter anyone.

  I have the date field load properly, but for the life of me cannot get the time to display at all.  I tried:

  1 Add a new date/time field

  2 duplicate one that works and just change the format of 'Time '.

  3 tried to remove them both and then create again.

  I discovered by removing both and starting, as I can get the date to appear in these two areas, but I can't do anything else to appear.  I can not get the time to appear in each area. !!

  Frustrated: Somebody can tell me what I'm doing wrong here...

  Because I don't see a place for me to download the form here, I posted on the following Web site

  I think you just download it and take a peek - if someone would be so kind - could explain things better to see for yourself.  It seems buggy to me, but I do not know!

  Thanks in advance,

  Dan has.

  See: http://provsnusa.com/test.html

  Hi Dan,.

  The time field was still date in script functions, although you use a time model (in the object > field > models).

  Just changed the script for:

  Current time in short-style date format.

  $ = num2time (Time (), TimeFmt (1))

  Here is the form: https://acrobat.com/#d=63FQyQ3bVTlj8ERIjvUGJw

  Good luck

  Niall

• photos of the iPhone are on the side and I can not turn because theres a problem with the property file

  Photos imported from my iphone came on the side and when I turn and try to save, it won't let me save it like that saying "windows Photo Viewer cannot save changes to this picture because there is a problem with the pictures of file properties". What should I do?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Problem with script on the master page

  So I have my build script of the unique number bit that I have posted here before... it's on the Initialize event of the field.

  
  

  If (this.rawValue == null) {}
  var d = new Date();
  this.rawValue = parseInt(d / 1000);
  }
  else {}
  this.rawValue = rawValue;
  }

  Which works very well if on the body of the form, but if I put it on the master page it re - initializes (and changes the number) whenever a subform gets shown/hidden. No idea how to stop it from doing this? I tried it on a few other events without a bit of luck.

  I came across another problem with this script, a field called 'Date' was interfering with the script - throw an error "the Date is not a constructor. Is - this normal (function/field collision)?

  Hi Jono,

  I had problems with script within the Master pages before. What I've done in the past, it is a textfield hidden in the main pages of script with overall binding (which featured many here today); then same name textfield in the master page picks it up.

  Good luck

  N.

  Post edited by: Niall O'Donovan

• Problem with storage of the profiles moved in field with the version 20.0

  Hello. Used an online translator. At the office of a local network with the domain name. All user profiles are stored by politicians in the field in the network folders on the server using equipment "the folder redirection. With the Firefox update to version 20, it stopped working. Pages that have been stored in bookmarks do not open pages only, open new, generally nothing happens as if the buttons in the page transition actions are inadequate, all search engines have disappeared. The complete elimination of the program and repeated installation does not solve a problem with a profile. Help, only the creation of a section local profile, but it is not a solution.

  Sorry,
  This is a known problem due to the use of UNC paths does not correctly supported by Firefox 20

  There will be a special ("Chemspill") version of Firefox. It will be Firefox 20.0.1 and will probably be released Wednesday, April 10.

  If you are unable to wait for to install Firefox ESR 17.

  Firefox17 ESR is affected by this problem and intended specifically for business / corporate, up-to-date and secure.

  • Information and download links
    http://www.Mozilla.org/en-us/Firefox/organizations/
    http://www.Mozilla.org/en-us/Firefox/organizations/all.html

  This is a related thread and it contains a suggested workaround solution /questions/955232 #answer - 424739 while continuing to use Firefox 20.0.0

  It's a shame these undertakings do not use ESR apparently do not test the pre-release versions in their IT departments. At least by two Aurora and Beta

  1. Evening http://nightly.mozilla.org/
  2. Aurora, http://www.mozilla.org/en-US/firefox/all-aurora.html
  3. Beta http://www.mozilla.org/en-US/firefox/beta/