Problems with laptop Asus V550CA touch screen.

Similar Questions

• Problems with drivers in Lite Touch Deployment (WinPE 6.2.9200, deploying 7 x 64 ENT)

  I'm trying to deploy Windows 7 x 64 enterprise on a laptop that is not our standard specification and ordered as only once without prior testing.

  When I have PXE boot since our deployment server, it loads boot.sdi and the trunk. WIM successfully, but I get so a mistake a network device was not a driver loaded for WinPE could not connect to the deployment server.

  Try to resolve what I have:

  > Download the appropriate Windows 8 LAN driver from the manufacturer's website

  > Imported it out-of-box drivers in MDT

  > Checked in the properties of the driver that the seller and the device listed in the error ID appear in the list of supported devices

  > Updated the deployment share

  > Imported the updated boot image to WDS

  This could not solve the problem, so I tried importing the driver directly in WDS and adding to the image manually boot. It has also failed to solve. After I installed Windows 7 manually on a disc, I have successfully installed the same driver to activate the LAN, although it is listed as a Windows 8 / 8.1 driver by the manufacturer. For me, this means that the driver is valid but I somehow do not import into the Lite Touch boot image. What can I do to make the driver to load properly?

  EDIT: See http://social.technet.microsoft.com/Forums/en-US/7562dfc5-ae02-40f0-b082-645a95b8fca3/problems-with-drivers-in-lite-touch-deployment-winpe-629200-deploying-7-x64-ent?forum=mdt

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Hi, I also have a similar problem with my asus s550cm and whenever I try to access windows update window blocking, here is the link to my dmp file.

  Separated from this thread.

  Hi, I also have a similar problem with my asus s550cm and whenever I try to access windows update window blocking, here is the link to my dmp file.

  https://onedrive.live.com/redir?RESID=7D3CCE252116AC94%211981

  http://1drv.Ms/1F2ZEzq

  Thank you

  Separated from this thread.

  Hi, I also have a similar problem with my asus s550cm and whenever I try to access windows update window blocking, here is the link to my dmp file.

  https://onedrive.live.com/redir?RESID=7D3CCE252116AC94%211981

  http://1drv.Ms/1F2ZEzq

  Thank you

  Follow the steps in the link below, then try to update windows again.

  Difficulty errors of corruption of Windows by using the DISM tool / system update readiness.

  http://support.Microsoft.com/en-us/KB/947821

• ASUS transformerbook touch screen does not

  I have a book of transformer Asus T100 and right now of problems with the touch screen. Only a quarter of the touchscreen works horizontally, and then to top it is not recognizing my touch. This happened after I went yesterday on its cover and the screen started jolting on. After that I turned it off the screen stopped jolting, but the touch screen does not work. There are no cracks or chips, and the screen is clean. What should I do?

  Hello Mrssantos,

  Thank you for visiting Microsoft Community.

  According to the description, I understand that three fourth of your transformer of T1000 ASUS screen book became unresponsive, after he accidentally fell.

  In the current scenario the reason most likely for this question might damage hardware, however, before coming to the conclusion and get a diagnosis of equipment carried out under the tab, we will check first on aspects of the software of this issue.

  I suggest you to try the 6 solution (that of a go) steps in the article below and check after each step.

  Touch surface: problems with touch

  http://www.Microsoft.com/surface/en-us/support/hardware-and-drivers/troubleshoot-the-surface-touchscreen#Solution1

  Note: I recommend that you back up all your important files and folders on an external storage device before performing any type of BONE repair the steps described in the article above.

  If the problem persists even after trying all the steps of the solution in the above article, I suggest you get a diagnosis of material performed on the tab or by the manufacturer of the computer or store local tech.

  Hope this information is useful. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Problem with laptop 2 in 1 look at a site muse as tablet version

  Hello!

  Can someone tell me how to solve this problem, if it is posible? My client has a Dell Inspiron 13 7000 Series 2-in-1 computer laptop and the Web site I created in shows Muse it the tablet version, not the desktop version.

  Thank you!

  It actually has nothing to do with what you set in the Muse.

  Muse determines whether to load the computer desktop, tablet or phone based on the smallest dimension of the screen (horizontally or), and if the device supports multi touch. The size of the screen is measured in the browser "reference pixel" (the size of the screen returned by the browser, about 96ppi) and not the 200 + ppi the latest ultra high resolution poster.

  A device with a reference 960 pixels minimum screen size or less that has a multi touch screen is classified in tablet form (read iPad standard or smaller).

  A device with a screen size minimum of pixel reference 415 or less is classified as a phone (everything except the biggest phablets).

  A Dell Inspiron 13 7000 series 2-in-1 laptop has a display of 1920 x 1080 in terms physical pixels and a multi touch screen, so it should generally be classified in office.

  At least two different things could cause the tablet to load:

  (1) if the scaling of Windows display, is something else that 100%, then the dimensions of the screen reference pixel will be something different 1920 x 1080. For example, if the customer has display scaling set to 150%, so everything is a little bigger, then the actual size of the screen will be less and the actual height will be less than 960 so it would be classified as a tablet.

  (2) Windows 10 reports unexpected for the dimensions of the display values when the display scale is equal to or greater than 200%. We are still working on a solution for this. It seems likely to be the situation in this case and when this happens usually the pages loading, rather than office phone, but I am here just in case this site has no updates phone (because if there is no available phone presentation of the Tablet would be the load).

  For what is sensitive, that adobe announced support for the delicate design is under construction at the Conference from Adobe MAX in early October. The current beta versions include support for the delicate design. However, sensitive may not be a remedy for this situation. With reagent only design you for a width of the screen with much less thought to the device used by a visitor to the site. As the overlap between tablets and laptops and tablets and phones continues to fade, you're pretty much going to always have to design to reach all screen sizes and there will always be a group with between peripheral who feels that your design is "too compressed" or 'too much office' or 'too much phone' for any device they use.

  FOR INFO. Adobe Muse beta program is open to all active subscribers to Muse (via a subscription to creative cloud) that can accept the terms of the non-disclosure agreement. You can join by visiting http://museprerelease.com

• Problem with my iPhone 6 s screen

  Hello

  I am having trouble with my iPhone 6s I bought 7 months ago.

  The problem is that if I touch the screen too hard (especially the top of the screen), then the screen stops working. All I see on the screen works as it normally does, but I just can't use the touch screen more.

  Thus, the only solution in this case it to lock/unlock my phone by using the power button, then it works normally. Sometimes I don't even have to press hard on the screen, I could for example be a part like slither.io with normal keys and the screen just randomly stops responding. Sometimes I have to just press a little harder than usual for the screen to react, but then if I have too much pressure, they would stop work again once of course.

  Have anyone experienced this before? A screen change will solve my problem? I just want to be sure before that I pay for it that I have updated to iOS 10 and it didn't fix anything, but yes, I guess it's a hardware problem?

  Since your phone is only seven months old, you should be covered by the warranty, if it's a hardware problem. The steps detailed here to try to see if something is useful: If the screen of your iPhone, iPad or iPod touch does not respond to touch - Apple Support

• Satellite U400 - problems with the Panel, the touch and media keys

  Hello, I have the TOSHIBA Satellite U400. Everything's a lot but I have some concerns.

  1. the touch screen (media buttons on the top of the keyboard - mute-media-play/pause-stop-rewind-forward-) turn
  the computer running if you touch! How to stop that from happening? I only need to use the POWER button.
  Start button / stop is sufficient.

  2. press MUTE on the touchscreen, no its not really "mute" or "disable." Instead, she don't
  is the Tower the White Glow Light for all Touch Panel ON and OFF (including the word "SATELLITE").
  How can I make it works?

  3. When you connect to Windows, I can choose between the password or RECOGNITION of FACES. How do I
  Assign the FACIAL RECOGNITION only without having to choose it?

  Thank you

  SAL :)

  Hello Sal

  I played around with this stuff and here is my opinion on this subject.

  (1) as far as I know there is nothing strange. I noticed the same thing on notebooks too. For example, if you want to listen to music, you can simply press PLAYER button (3rd from left) and begins at will for laptop and open windows media player. If you want to go on the internet you can simply press INTERNET ((deuxieme button on the left). Laptop will be put into construction and Internet Explore will be open.
  So there is nothing strange, and even get on my Satellite P200 and brand-new Satellite A300.
  To be honest I don't know if this can be disabled. I'll ask a friend of mine. It is monster of Toshiba and maybe he knows more about it. But this behavior is certainly not strange.

  If you want to use only the power button and then press power button to start. Do not touch the other.

  (2) Please check s operating manuals and look for info on this button. AFAIK it is clearly written Mute or LED on / off depending on the model you purchased, press this button to mute the sound or turn on or off the illumination of the logo of the brand, touchpad and buttons.
  So please do not mix anything. This button has no two options. On your model, you can disable illumination only. It is the same on my laptop. So there is nothing wrong with your laptop.

  (3) you also misunderstood this feature. If face recognition is activated the two options will be displayed. If you do not want to enter a password you can use the option of face recognition. But what you will do if for some reason your face may not be identified correctly. How you want to connect?

  So, please don't be irritated by these things, everything is OK.

• What is the problem with my Satellite L305D-S5892 screen?

  I never had problems with it before, the screen, as shown in the video would often be shown whats then screen resumes very well no problem. now it doesn't do that.

  I connected my laptop to my HD TV and it displays fine, but this isn't on the laptop screen.
  I was looking for a new phone if it is too expensive to repair/replace screen but the option is there to replace me a fraction to pay for a new screen.

  Anyone had this problem before? and do you think its something worse?
  What would you recommend to fix the screen or not?
  I know the option it for just buy a new one, but no info on what is wrong (I know foires screens) and your recommendations, I don't have a warranty in addition for it any suggestion would be appreciated.

  Thanks in advance the video link is: http://www.youtube.com/watch?v=RMauAZRgJQU

  > I plugged my laptop to my HD TV and it displays fine, but this isn't on the laptop screen.
  Since the screen on the monitor external is OK, I think that the problem could be linked to a malfunctioning GPU (graphics chip).

  It might b something wrong with the internal display, fl inverter, cable screen, etc.
  As you can see, there are different reasons for this, and it is difficult to tell which part can cause this problem.

  But if it s poster so a fix would be a costly business because mobile screens are gone dear laptop. However, if it s only a small part as FL inverter or some cables then it is a fix.

  In any case, I recommend you first update the graphics driver and checking if the BIOS is updated.
  If both were done, and no improvement is seen, then ASP should check parts.

• Problem with laptop Lenovo T400 video controller

  Hello

  I have problems with the video controller on my laptop of Lenovo T400.

  Brand new and installed with Windows XP factory.

  He maintains and prompt to install the drivers for the video controller.

  I tried to use the CD and downloaded the chipset and video drivers Lenovo Web site, but the problem persists.

  Anyone encountered before?

  Thank you and best regards

  Solo

  option 3.

  Discreet GPU = ATI GPU
  Integrated GPU = Intel GPU
  Switchable graphics = Intel or ATI switchable by Vista and Win 7 OS Thinkvantage Power Manager.

• Problems with laptop

  Hi, I have big problems with my laptop, its far too slow and whenever I surf the net or I use office, what I do he says "not responding". Also when I use internet explore I have no why I get so many ads to open in other tabs. Another problem is that google chrome still crashes. I thought there was a lot of viruses however, when I scan it says there is no threat of viruses. Please tell me why I have so many problems with my laptop and should be done.

  Pop-up Blocker is enabled in Internet Explorer? 'Tools' - 'Internet Options' - 'Privacy', if it is checked, try turns.

  You can get infected, so try another scan. Update your anti virus and run a full scan, then download, install, update (by right clicking on its icon and 'run as administrator') and run a full scan with malwarebytes(free). Also try (free) Superantispyware. Run these two only as the scanner at the request and do a full scan.

  If it can't find anything then try a sfc/scannow to see if this detects and corrects errors in the main operating system.

  Also run a disk error check to see if that locates all the problems.

• Problem with laptop Pavilion dv6 wireless connection

  I have a problem with a computer laptop dv6-6b50ea Pavilion of customers. He has win7 64 bit installed and an Intel Centrino WirelessN1030 with blutooth wireless card.

  The user has used the laptop abroad with a 3G usb dongle with T-Mobile, but now wants to connect to his home wireless router.

  Initially only the two switched 3g options are visible in the network for the connection options. Therefore, I uninstalled all T-Mobile software for control of the key usb 3g and removed the dial two profiles, but the laptop wouldn't see any wireless connection.

  The orange light was on the f12 key and I couldn't get the wireless to work. Finally I found that even if it has been enabled in the HP connection manager, it has been disabled by Windows Mobility Center. I finally got the light turns white but still saw wireless networks while two other laptops could see the router in the same place.

  I took the computer laptop and tried it on my own wireless network, and although he saw them he said that they were very poor and wouldn't connect. I tried all the normal things like turning off the antivirus and windows firewall. I've updated the software of the driver from the HP website, but it still wouldn't connect.

  Finally, in desperation I disabled two virtual connections created by the driver. Finally he saw all my access points Wi - Fi including some a long way outside. I have is that it connects and thought that I had a crush, but restarting it would link is no longer. Since I brought the oldes driver I can find on the Intel site, updated twice by HP Support Assistant, who has updated the bios and installed the latest drivers intel, but it now not see any wireless network, or if it does sporadically and does not connect. Ethernet connection works fine.

  I've seen lots of messages on mobile phones of series dv6000 with Wi - Fi and an overheating issues etc. What is the same thing with the dv6 6b50ea?

  Any suggestion would be appreciated

  I had a very similar problem with Tablet Dell Latitude slate ST of my son.

  He has the card brand Dell Atheros wireless bluetooth/wireless combo. He had connection problems in W7, but I was finally able to make it work most of the time.

  I saw on the Dell forums, a lot of people complain about this card.

  I installed W8 on the Tablet and there is no pilot, so I resorted to an old driver w7 and I can't get the map to work most of the time.

  So, I ordered an Intel 6230 without wireless/bluetooth combo card for it and I'll see if it makes a difference.  Intel has W8 drivers for the card.

  I did the same thing you did... inserted a map of the network, D - Link DWA-125 USB into the USB port.  W8 recognized, installed the drivers and it connects without any problems at all.

  The difference between my situation and your is however that the 1030 Intel has no problems experienced with W7 link I know, that's why I suggested a factory reset to see if you can start from scratch and exclude a hardware malfunction.

  If the card still does not work, then of course we should be replaced by a card support listed in the service manual.  Unlike Dell, with all computers laptops HP, you can install one of the maps in the service manual and they must have the part number HP on them or they do not work.

  Kind regards

  Paul

• Problem with laptop (G72-130ED) of load

  Hi all

  The laptop my friend is having some problems with the charger. When the charger is plugged in it will sometimes load for a while and then suddenly stops regardless of the amount of battery remaining. Apparently, when she waits for a few days (not sure of the specific time period) it will load again, but once again only for a little while (sometimes up to what it is completely filled).

  Here are the facts:
  The charger works on my laptop, HP Pavilion DV7-1110ED. (if this isn't likely because the charger)
  My charger works on his laptop computer, HP G72-130ED. (so it's probably not the plug or battery)

  With the battery disconnected, the power button blinks with his charger, but not with mine.
  With the battery disconnected, he starts with his charger (maybe after the recovery period it will be), but it will be with mine.
  I uninstalled and reinstalled Microsoft AC Adapter, just in case where that has nothing, but it didn't.

  I tried to Flash the bios to the latest version, as I read that COULD be a solution, but InsydeFlash said the bios got corrupted or had no good digital signature. I'm sure that the bios is not corrupted, but I'm not sure of the digital signature. But then again flashing the bios can do absolutely nothing to fix this.

  I'm not completely sure if the charger works on my laptop, my battery refuses to charge at all even with my charger, but my laptop can run completely on its charger. (My laptop is unable to function without a charger, the battery is completely bust and stuck at 41%)

  Summary of specifications:

  Laptop: HP G72-130ED
  OS: Windows 7 64-bit

  Original still installed BIOS

  Thank you in advance,

  Celestral

  Hey Celestral,.

  First of all, I want to hard reset the computer. This is a weird question but a hard reset would be the first thing I try. By removing the power of the computer and then allowed him to be reintroduced it can fix issues such as this one.

  To perform a hard reset

  Shut down the computer by going to the menu start and select shut down. (If you have no display, hold the button for 5 seconds)
  Unplug the adapter from the laptop.
  Remove the battery from the bottom of the laptop. There will be a switch/battery eject button.
  Wait at least 1 minute with all sources of power disconnected.
  Reinsert the battery and reconnect the power adapter, and then try to turn on the laptop.

  Also can you check the two power adapters and let me know the specifications (voltage/Watt, etc.) of the two? I have a suspicion that your power adapter that works on your PC can be a higher voltage.

  Thank you
  Sean

• Problem with the resolution of my screen after installing Windows on my ASUS laptop K51AE 8.1.

  At first I used the Windows 7 operating system before you download and install the student version of Windows 8 on my ASUS K51AE track. I fully configured my laptop with the new software setting with my own parameters before noticing that everything on the screen seemed very pixelated operation and large, in order to solve the problem, I tried improving the resolution to something higher up on the list but unfortunately I was not given another option to go to. The laptop is locked for the resolution of 1024 x 768 when I used the resolution of 1920 x 1080 front on Windows 7. I'm still not able to click / tap on the option of the current setting of 1024 x 768, I don't know why this is happening? Please ask help?

  Hello

  You must download and install the latest graphic drivers of Windows 8/8.1 ASUS for your machine, as it has been defined for Windows 7.

  If none are available, you will need to upgrade, if you can, your graphics hardware to solve the problem.

  Normally, you would have embedded chart that you can not change

  ASUS:

  http://www.ASUS.com/support

  See you soon.

• HP 255 G4: problem with sensitivity to the touch and slider jump

  My question - problem could be funny, but it's a problem.

  I bought HP 255 nine G4, from the box. First impression was: a pleasant experience, but first touch was terrible. I had several laptops, but never the same problem: cursor is wavering and being so inprecise it is almost impossible to locate some details using the key.

  I have included a picture of the surface of the laptop. Should I maybe take off this perforated layer and reach the brilliant below surface? I tried to peel on the rounded corners, but he can't go easily, so I didn't damage it.

  Please give me a sugestion. :-)

  I'll answer myself, could someone help.

  When I installed WIN 10, all problems are gone.

  With WIN 7, nothing worked, I was responsible for the search and looking for drivers, but USB 3.0 has not worked, F keys did not work, touchpad was terrible, all together, very bad.

  With 10 WIN, everything worked, only a few development was necessary.

  With the new computer (product end of September 2015) the new system (WIN 10) so enjoy.

• Satellite Pro L500-12F - problem with CD/DVD player and screen

  Hello...

  I have a few questions on my laptop...

  1. is it normal that the DVD rom on some DVD/CD it is very noisy and vibrates a lot, spesialy on older CD

  2. the lid of my laptop when I close its kinda not in harmony with the rest of the pc it is not fully aligned, but it's a little difficult to see wait when you look for it... but its good on and what is not lost or anything just not setting for the "body" of the laptop

  3. the cover still once, under the screen where the cover is mounted on the 'body' off the laptop so... It is not glued to the screen as the rest of the rolled edges it is right next to him that you can drag into it, so you can see the wires enter the screen etc.
  is this normal?

  -Thank you

  Hey Pedersen37,

  (1) maybe your old CD's doesn't work correctly. What happens if you try the same disks in another computer?

  Regarding your display/cover problem if you mean that you can see the cables that they go into the screen I can see it on my laptop. Normally, all the cables are invisible and under the plastic.
  He s strange to say something on the subject but maybe a lid plastic isn't installed correctly or a screw is missing

  If you think that something isn't normal, you should contact your authorized service provider. They can check the laptop.