Problems with multiple Conditions

Similar Questions

• Problem with multiple downloads with the router. Allows you to change the TCP MSS value?

  Original title: TCP MSS

  Hi all.

  I currently have a problem with multiple downloads with my current router.  If I have two current downloads at the same time I have no access to all web sites.  It's almost as if the downloads take my meaning of bandwidth there is more nothing for ordinary surfing.

  As a test I put an older router on my system and have a significant improvement in performance.  I have 2 downloads in progress and also surf at the same time.

  To compare two routers, I noticed that the only real difference between the two is that the TCP MSS value is set to '0' on the router of the problem, and then assign him 1392 (MTU - 40) on the router to elderly who gives better performance.

  It is my understanding that this value governs the size of transmitted packets.

  My question is this:

  What is the MSS value which is causing the problem?

  Congratulations in advance.

  Be sure to interpret the values. The '0' means no not literally because the link would not work. It is likely, that it allows the local device set limits for the link. Don't forget that there is a Maximum value and as such can be any value up to such limit as defined by all devices in the path.

  You can try capping manually but it is unlikely that any local limit will come to effect unless you set very low.

• Problems with multiple worksheets XY plotting (program generates repeated data)

  Hello

  I want to make a small program that will reduce the amount of time to go forward with the measurement data. I get data into .dat format, where all the files consist of frequency measurement with an X and a Y column. The problem is that I made 4 experiments (X column is the same for each experience) with 15 measures file each and more than 500 points of measurement in each file. I would like to make a simple manipulation and this copy that information to a file with same X column and multi-column, later I could use these data with Excel or origin (do it manually, it's frustrating and time consuming).

  At the beginning my program reads the background information with X and Y (b), and after I open the worksheet to insert the X and data of Y (n). (make a simple manipulation, like dividing Y (n) /Y (b), program show a graph of the current data and another graph multiple data, which are stored and must be exported in .txt, .dat or directly to Excel (which is more preferable)). I'm OK with the opening of several files of data, but which are not okay with copy/paste file and handle all that data manually, but that's my motivation for this program.

  The attached example can do all this (except for the entry in the file). He draws multiple charts on a XY chart using cluster and travel records. It is even possible to extract data in Excel, all that graphic, but the real problems comes with data are always added because of the loop. This gives a lot of empty and repeated data later. I'm jonesing to get rid of this. I have also attached several files of measure: 1 background and 3 measures.

  P.S. I tried to save time thanks to this program, but now, I spent more time than if I did it manually

  Your program absolutely no sense. What is the purpose of the structure of sequence? It just sits there, operating both in parallel to the while loop. Probably that you read from the local variables before other parts of the program had a chance to write valid data for them.

  In the while loop, you have a case of timeout that adds the same data over and over again, every 50ms. Why?

  Your mechanical actions "switch release" are misguided. Use actions to latch and remove structures deal as part of the event.

  Try to rethink the problem once the mode, and then solve the problem with 20% of your current code. See how far you get.

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Major problems with multiple items of page on the web viewer since the last update

  In the last days, we had problems with all our multiple page items that are newly updated or added on the web viewer.

  Scrolling of pages just to repeat content again and again and true articles page see first pages content overlaid on all subsequent pages. It seems that something important broke in the way that the dps push articles to the webviewer, as is happening through fact sheets and articles. This means that we cannot publish anything until it's resolved.

  Someone knows something similar? Any suggestions?

  Hi Lucie,.

  Please contact support for assistance with this enterprise. They can investigate and open a support issue with if necessary engineering team. Contact information is available by logging into http://digitalpublishing.acrobat.com/ and looking at the Middle bottom of the screen.

  Neil

• Problem with multiple threads

  I have a program that interacts with an ESX 3.5 server using the VIX API, written in c#. I'm from multiple threads in c# program with each thread running an automation process which creates a connection to a virtual machine on the ESX Server, some automated process, and then disconnects. I'm having problems with this. When I call Disconnect() from one of the threads, it seems to cause problems with my other son if they have not yet disconnected. I connect to an another VM on the server in each thread. The problem is if I don't call disconnect, I get errors, but if I call disconnect in a thread it causes errors. Y at - it something similar? Any suggestions on how to make this run smoothly? Thank you!

  This sounds a lot like you are getting hurt by the host sharing of handle.  If HostConnect() is called with the same parameters, the handle of the host gets reused.  HostDisconnect() will clean this handle, even if his commune.  It's actually documented behaivior.  We have also decided that there may problems like the one you have reached, so it will be removed in a future release.

  So your application will share the handful of host among all discussions, and as soon as we call disconnection, the host handles in other countries also becomes invalid.

  Make a unique HostConnect() and share this handle inside threads is a way to avoid this.  HostConnect() is generally quite expensive, so we recommend in all cases.

• problem with multiple digital signatures by deactivating the fast web view

  Hello, I use acrobat pro 9.1 and have questions regarding a problem with several signatures on a pdf document.

  Why I ask the question below? My job is to prepare PDFs for submission to the FDA. The FDA requires, among other things, the documents submitted electronically have quick view active web.

  I am currently exploring ways to use digital signatures to sign pdf reports and always make sure they are spec FDA compliant. My question concerns a document which would have several signature fields. What I do, it is to create at least two signature fields in the doc and then save and optimize everything for fast web viewing. When I connect the first box and save, the file retains the fast web view state. Yet, when I apply and signatures past one, the file is then left for quick web display with no obvious way to turn it back on. I'm confused as to why it gets disabled after the second, and not just after even the first condition has been signed. And, of course, I would like to know if it is possible to maintain the fast web view and how to do it. I will gladly accept "tinker under the hood' suggestions file if they exist as well.

  Please let me know if something is not clear or you would like more information.

  Thanks for your time and your help.

  ~ Vlad
  

  Hi Vlad,

  Real Michael has got the right answer. A "Linearized" file (which is a file that has been optimized for fast Web view) aims to get the first page to display as soon as possible so that you can start playing without waiting for the rest of the file to download. Incidentally, the first designated page should not necessarily be page 0 (use of PDF has zero according to the pages counting system), but it usually is. The PDF specification, "the main objective of linearized PDF is optimized PDF documents viewing read-only. It is expected that the linearized PDF generated once and read many times. Incremental update is still permitted, but the PDF is is more linear and subsequently is treated as ordinary PDF. »

  When you open a PDF file the first time that the backup process is a full 'save', it is the whole document is rewritten, so there is no more than two percent markers EOF (end-of-file) inside. The first expressions of folklore means what page to see the first and the second EOF designates the end of the rest of the file (so the browser knows when to stop downloading). However, when you add a second signature (or even longer) the file is saved as a "record growth" and new data is appended to the original file. It is that you can do a restore to the previous signed version and allows Acrobat/Reader verify the integrity of each signature regardless of any other signatures. It's the incremental save, breaking the linear optimization of the file.

  Steve

• Problem with the conditional tags in printed output

  I write help files for different versions of our software - version 4 and 5 using Robohelp for HTML 5.0.2
  
  There is a large overlap of information between the two, so I use a help file joint with marked topics that are specific to version 4 or version 5.
  
  I went out and then use with 'NOT v4' or "NOT v5" as the conditional tags.
  
  It works fine in the HTML output. However, I encountered problems with the printed output.
  
  Ideally, I want the help file using the option "generate the single document" because it means that the document produced, without the single output field. However, when I do, the tags conditional build fail and I get a piecemeal result.
  
  If I generate the document by using the option 'generate individual documents' tags conditional build work, but I get the only field I want to avoid.
  
  Does anyone know how to get the conditional tags to work when the option "generate the single document" is selected?

  Pierre and HKabaker - thanks for your comments.

  I think I have the answer now.

  In the properties for the SSL Print dialog, the third screen is the dialogue of section layout. I had removed some sections in the right pane (for example, the default title page, glossary, and index) because I did not want them to appear in the final printed output. It seems that without these sections present conditional compilation tags do not work correctly when the document is released by using the option 'generate a single document ".

  I started again with a "blank" printing of SSL version. Conditional constructions using the "generate a single document" appear to work fine when I leave the dialog layout intact section.

  I can even do the conditional tags build an injustice because the option "generate a single document" (after that I made the changes in the dialog layout section) seems to be that some of the chapters in the table of contents and omitting others.

• Problems with multiple framerates and Blackmagic Decklink 4 K Extreme reading

  Recently, I exchanged by AJA Kona card for extreme Blackmagic Decklink 4 K in order to get external followed in DaVinci Resolve.

  I work in a 1080 p 23.976 project that includes a 29.97 SD and HD images. Loading these images of 29.97 FPS in my layer source footage, I meet regularly with frozen reading (the triangle of game in my toolbar becomes a symbol of the square and stays that way). From there on, I am unable to playback images in any scenario and requires a complete closure of the system to return to normal! The problem is apparently BOUNCING, with successful reading happening sometimes.

  Images of 29.97 was DVCPRO, I tried to transcode to Prores to solve problems. No dice. I think it's a problem related to the inability of the Decklink to manage several rate display on the fly, but wanted to present here, too. I also experienced delays intermittent sync on my monitor.

  DeckLink driver 10.0

  First CC 7.2.1

  Mac OSX 10.9.2 (mavericks before the same problem)

  Hi Andy,.

  You should not have problems with Blackmagic manage several formats on the fly. However, I believe that the problems of reading frozen that your description is related to the Desktop Driver video 10. I suggest rolling back to 9.3.3 for now. Blackmagic now turns on this issue.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• Canon 5 d Mkiii problem with multiple registration.

  Hello.

  I have a CF (32 MB sandisk extreme 60 MB/s) card and an SD card (sandisk 32 GB extreme pro 95 MB/s) inserted and in the menu under the Record func + map section I the func record. Rec. multiple value. My problem is that sometimes my video files are only copied to the SD card and not the CF card although the photo files are saved at the same time.

  Any help would be greatly appreciated.

  Canon 5 d Mkiii 50 mm f/1.4. EF 16-35mm f2.8L II USM.  EF 24-105mm f / 4L IS USM.

  EF 24-70mm f/2.8 L USM. EF 100 mm f/2.8 L Macro USM.  EF 70-200MM f/2.8 L IS USM

  Speedllite 430EX II

  I asked a videographer, a friend and he said...

  You can choose which films of map will be saved to, but there is no excess capacity or ability to mirror

  for movies with the 5 d Mk III.

• Problem with the conditional formatting according to pivot

  Hi all
  
  OBIEE version 10.1.3.3.3
  I have a measurement with the following condition column
  
  Measure:
  -Case when DATE < VALUEOF ("CC_DATE") and the actual amount of another amount, then end
  
  Here CC_DATE is variable repository
  
  I created a column duplicated by the following condition
  
  Double column:
  BOX WHEN Date < VALUEOF("CC_DATE") then end if 0-1
  
  And try to use duplicate column in a measure of conditional formatting, however I do not succeed
  
  any suggestion to solve this problem?
  
  
  Thank you
  SMA

  SMA,

  Check the link below if you want to put in shape measures based on the intersection of the dimension. A variant of the above link.
  http://www.obinotes.com/2010/10/format-cellmeasure-value-based-on-row.html

  J
  -bifacts
  http://www.obinotes.com

• Problems with multiple locations

  I am having trouble wiring a table 2D plotting a graph of waveform information. According to everything I read in the documentation, this shouldn't be a problem, but it is. One thing I read said to activate the option 'Convert table' draw with a 2D array, but this option is grayed out in the menu. The strange thing is that there are other waveform graphs in the project who accept 2D data tables but I am unable to find a difference in the options between them. I have attached a few photos to see what I mean.

  Thanks for your help!

  I discovered the problem - the graph was not initially wired to a 2D array. I guess it maintains its initial entry 'type' for the duration of the program.

  Thanks for your time though.

• problem with multiple trace files

  Hey!

  I saved a text file with four columns and I want to replot two of all the required columns.

  I tried the logic below, but there seems to be a problem. The graph shows very few samples.

  Check if my logic is correct.

  Thank you

  My inner Malcolm Gladwell tells me seem to convert your 2D chart.

• WTVConverter problem with multiple audio streams...

  The WTVConverter MSFT includes Windows 7 does not correctly handle multiple audio streams. The WTVConverter in the conversion of the format ".wtv' to '.dvrms' instead of keep the main audio stream retains the other stream audio visually impaired. Usually, he keeps the other stream audio visually impaired. NCIS and NCIS Los Angeles, CBS programs have this problem because they include signals SAP (accessibility for blind and partially sighted options)

  How can I tell WTVConverter to include only the main audio instead of the stream audio visually impaired

  Thank you

  Chandra

  Hello, Chandra

  If you think that there should be an option to select a stream when converting, you can leave your comments on the following link:http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  In addition, you can try searching for a free replacement program convert WTV files.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Multiple Choice Quiz

  I tried several times to insert a multiple choice quiz success in my slides. The problem is that when I try to take the quiz (for a preview), I have to click several times and wait several boxes pop up coming (correct, click anywhere; incorrect, etc.). All these boxes pop up show before he let me go to the next slide. Anyone know what I need to change?

  Are you found using the preview feature in presenter or switch to slide show view (F5) in PPT? Looks like you're watching just PPT presentation, who must play through all the animations on the slide.

  You see the same questions if you publish the presentation on site and view the published version?