Problems with signal followed during sampling of the signal

Similar Questions

• I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the safe mode and still no success. Help, please.

  Question
  I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the mode 5 firefox safe and always without success. Help, please

  To help other users find solutions, please come back to this Thread and connect you to the
  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• I don't know why I had problems with FF 3.6.16 and the last update for thunderbird

  I'm at the Canada and for some reason, downloads for the two FF 3.6.12 and Thunderbird was last updated was the BritishVersions is why I UK search engines, not the US versions is maybe why I'm struggling with my email and addons. The other 2 computers in my house is the American version.

  But there is always something a bit screwey with 3.6.12 that some addons do not work correctly on other computers. Can you please change the software for the US version please? Thank you

  I deleted the software twice already. before realizing I was downloading the British version... same problem with my Thunderbird cannot connect to the Internet service provider even if everything is done correctly! Help!

  You can find the version en here:

  • http://www.Mozilla.com/en-us/Firefox/all.html
  • http://www.mozillamessaging.com/en-us/Thunderbird/all.html

• I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  Thanks Ray,

  Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.

  Kind regards

  Monday Nwankwo

• After 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear

  Hello, after 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear... what should I do? Help, I don't want to say 'goodbye' to it already... Thank you

  It could be the plug on the computer that is the cause of the problem. Try another helmet or a pair of speakers in it.

  If you hear only on one side, who will tell you that is the question.

  If you hear from both sides, you must obtain a new helmet

  Software will fix either of the foregoing...

• Problem with anchor points, shifts vertically in the browser view. What is the problem?

  Problem with anchor points, shifts vertically in the browser view. What is the problem?

  have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header

• Since Acrobat Reader downloaded DC I can't sign my PDF documents. It does not give me the option more and yes I am connected. On the old version, I got no problem with clicking on "signature" and draw the area where I needed my signature, put passw

  Since Acrobat Reader downloaded DC I can't sign my PDF documents. It does not give me the option more and yes I am connected. On the old version, I got no problem with clicking on "signature" and draw the area where I needed my signature, put the password and "POOF" my signature would be there. With this new version, it won't do that or give me the option. The online help is useless. I need to explain to me how connect you as I used too?

  Hi nicholass35183848,

  I assumed that you had a digital signature created in your player application of old and whenever you use to fill out a pdf with a signature field signed you it. But in order to draw and then sign you must use Acrobat Pro DC no DC drive.

  Thank you

  Abhishek

• I have a problem with a card being inadmissible for the zoom on a phone.

  I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?

  Please provide more details, as if the card is integrated an image or a real map generated by widget.

  The generated plan must zoom in/out.

  Thank you

  Sanjit

• I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please advise...

  I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please notify.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• Problem with power settings during the opening of Windows Media Player 12

  Original title: power options Windows Media Player Exchange

  WMP 12 of opening causes the power option for monitor turn-off time to return even if the time is 2 hours 15 minutes. Tried to reset the value, value save, all electrical energy plans by making the same, nothing is done.  Other set values, for example disk hard turn off (never set) will be defined and stay together.  Would have someone seen this kind of thing?   Operating system is Win7 Professional 32-bit.  All available updates have been installed.

  Hi Jim,.

  Please contact Microsoft Community. I understand that you have a problem with the power settings when opening Windows Media Player 12. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. The problem only occurs when Windows Media Player is opened?
  2. Did you the latest changes on the computer before this problem?

  This problem might have occurred because of these reasons:
  1. incorrect power settings.
  2 conflict between third-party applications.

  I suggest you try the steps listed here and check if it helps:

  Method 1:
  Run Troubleshooter of power that will check if the basic power settings are set properly or not.

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:
  If the problem persists, restore to the default settings for power management. Check if it helps.

  Note: try the following steps only if you have not tried before.

  Step 1:

  To restore to the default settings power management, follow these steps:

  1. Click Start.
  2. In the search programs and files box, type cmd.
  3. Right click on CMDand then click run as administrator.
  4. At the command prompt, type powercfg - restoredefaultschemesand then press ENTER.
  5. At the command prompt, type exit to exit the command prompt.
  6. Restart the computer.

  Step 2:

  Once the plan of power reset by default, you can create a new power plan and the same customize according to your needs.

  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  Method 3:
  If the problem persists, set up the computer in a clean boot state, and check if that helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows:
  http://support.Microsoft.com/kb/929135/en-us

  Note:  After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problem with DAQmx Schedule VI (sample clock)

  Hello to you all,.

  I'm new to this forum, please bare with me. I have some experience with LV, but I am relatively new to data acquisition projects. I use LV2009.

  I want to make sure that I use the hardware timing (instead of software distribution) in my project so I followed some of the threads here as sugested to use DAQmx Schedule VI. The problem is that no matter how I set the system I get the same error-200300 invalid calendar
  type.

  The project is simple. I encode with 1000 pulses per
  Rev and it is mounted on a shaft of a turbine water goes thru. I'm watching the frequency
  and so the rotation of the shaft which tells me that the amount of water flows through the turbine. In the end, there will be 2 channels
  by every encoder and ~ 3 encoders (turbines) total and calibrated the main meter that will give me constant impulses and all encoders will be compared to this master frequency.

  I'll use PCI6602 DAQ, but
  now, for the development, I use USB6221. Let's say that the
  frequency is between 500 Hz and 10 kHz. What I am doing wrong? Or maybe better to ask - what would be the right approach for this project?

  Thank you

  Marty

  Hi Marty,

  It seems that your question is already answered here, but Jason is correct that the 6221 neither the 6602 support a clock sampling for frequency measurements.

  As Jason mentioned, your best bet is also likely set the mode of synchronization for "implied". This means that the frequency value is sampled at the end of each period of your input signal. In addition, a solution that is clocked by the software (On-Demand) might be acceptable.

  X Series DAQ devices allow an external sample clock to use for frequency measures (described in the Manual of X series). Frequency of sample-clocked measures are useful in very specific
  circumstances, but it does not seem that you need this feature based on what you've described so far.

  (621 x) bus-powered M series can also be configured to use an external sample as the X series clock but do you not have the same features described in the manual of the X series.

  I hope this helps!

  -John

• Newbie problems with getting a local server from the BFC set

  It started in another post by me about what I thought, it was a problem with port 8500. I had looked at the getting started with video CFB, and on that, he used localhost as the server name and as the host name. He then assigned port 8500 as the Port of the Web server.

  When I do that it is in the windows as stopped servers. If I try to start it the error I get is

  'Start-up localhost' has encountered a problem

  Make sure that the server is not already running or any application does not use the port of the Web server.

  So as an experience, I changed the port 80, because the admin page doesn't work in http://127.0.0.1/CFIDE/administrator/index.cfm

  The server at the bottom of the BFC window then shows a server running.

  I create a small "Hello World" index.cfm page and when I touched one of the tabs of the browser, Firefox and IE in my case, I get the following error.

  Error during preview generation:

  There is no server configured for the project myproject , to which belongs the index.cfm file. Configure a server in ColdFusion in ColdFusion server settings before you continue.

  What Miss me?

  Thank you

  Dennis

  You must specify the BFC BFC server must use in order to preview the file.

  If you need to associate a server with this project. To do this, right-click on the project-> properties-> ColdFusion server settings.

  Here in the "Server" dropdown list, select the server that you have added in CFB.

  Once this is done, make sure that your project is in the root of the document from the server in your case, that could be the Inetpub\wwwroot.

  Once this is done, the preview should work.

  -Bhakti!

  Adobe ColdFusion team

• Problem with some fonts of symbols after the installation of the Sierra

  Hello

  I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

  All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

  In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

  I already tried the following:

  1. check the fonts in font book

  2 fix the duplicates in the font book

  3. using the "Restore Standard fonts" option in the font book

  4 deleting a file in the folder Preferences plist Fonts

  5 deleted the cache of police and the database

  I'm out of ideas. Has anyone else had the same problem found a fix?

  Kind regards

  Greville

  I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

  And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

  So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.

• On Firefox only, I get problems with a few Joomla sites using the JA_purity template. Error: has not been loaded because its MIME type "text/html", is not "text /".

  Hello

  I updated Firefox on my computer for 13.01. Now, he struggles to read about 2 sites - both are Joomla and based on the model of JA-purity. What happens is that it fails to load the CSS files to do with the side and the top of the Joomla site menus. The file comes up with this:

  because its MIME type "text/html", is not "text/css".
  Source file: http://extensions.joomla.org/
  Line: 0

  This error does not appear with other browsers and it displays perfectly in fact in all other browsers.

  I'm new on this but I read the following article and think it could be my problem

  https://developer.Mozilla.org/en/Incorrect_MIME_Type_for_CSS_Files

  Where Im stuck, it's that I did not fully understand what to make of this article, if I could get a step by step guide to fix this problem that would be greatly appreciated.

  I apologize in advance if the answer lies somewhere here - I have had a look and couldn't get out.

  Thank you
  Alex

  I don't see that the error and all style sheets seem to load.

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Problems with different e-mail addresses and the different Apple ID

  Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.

  First a primer on my Apple ID

  ***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).

  ***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)

  ***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)

  ***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.

  I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.

  What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).

  An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.

  So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.

  Best regards

  Philippe

  Hi phillla,

  Thanks for all the details with your accounts.

  Can be difficult to have more than one Apple with several e-mails all mixed together.  If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.

  The analysis of what you seem to have however...

  Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.

  *@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.

  You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own.  As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.

  You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address.  You have a relief attached to this ID e-mail? This is the email that would be used to recover.   You receive your check or reset email - Apple Support

  Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well.  Then follow the link above to get access to *@losmail.no and control so that you can rename it.

  Best regards.