Problems with smart sharpen

Similar Questions

• Problems with smart sharpening in Photoshop CC 14.2

  When I opened the smart sharpening filter, the hand symbol appears and Photoshop does nothing more. I must close the program with Ctrl - Alt - Delete. All other filters work correctly. I also removed and installed Photoshop CC again, but the problems remain the same.

  Can someone advise?

  Cordially Piebe

  Try resetting your Photoshop preferences when Photoshop Act one of the first thing you try before reinstalling resets your preference they also survive a reinstall, the problem should be in them a relocation will always have the same problem.

• Problem with Smart TV 32l4333dg

  Hello! I have a problem with my Toshiba Smart TV. I have a Lenovo Z50-70 with Windows 10 laptop. And I want to connect to my laptop to TV through Miracast screen. And the problem is, when you connect through Miracast, the TV's display: connected. Please wait or something like that, and then my laptop screen and a television screen became black. Is there a solution for this problem?

  have you checked the settings of your screen in Windows?

• Problem with smart updates using the WiFi, modem OK

  I started having problems with my WiFi on my Toshiba Satellite laptop.

  I can not access any program Smart Update - Windows, Norton, Spydoctor, inheritance etc..

  These Smart Update programs work very well if I'm connected to Dial-up but not wireless.

  I checked my Norton Firewall settings - doesn't seem to be an indication of a problem here.
  I disabled my firewall program - no change.
  I tried the drivers updated - no change.
  I uninstalled the other software spy/advertising programs and checked my registry - no change.

  My Internet is fine - I can always check email and browse websites - just the Smart Update function seems to be affected.

  I am running Vista and have updated and installed all the files system through my modem connection. I use Norton 360.

  Any suggestions?

  Concerning

  Lisa

  Hello

  The wireless internet connection seems to be ok if you can access the Web sites.
  So I think that the problem must be installed software or application.

  You use Norton 360?
  Although I know this software could affect the internet connection.
  See this Symantec support page:
  http://www.Symantec.com/Norton/support/selectproduct_ts.jsp

  There are some frequently asked questions about various issues with Vista, and Norton 360.

• When I run the disk check to HP Support Assistant I find problems with smart control

  Hello

  My first question is this:

  When checking the disk i run assistant hp support I find smart check question so I said that to help defragment the disk in the defrtagmentation details I find everything to analyze if it's 10% or more then defragment now.

  but when I analyzed what I found 5%.

  What should I do to get rid of the smart check number?

  and my 2nd question is as follws:

  I have hp Pavilion dv6 2138ca laptop and windows 7 64-bit. I have problem with recovery manager that is built in hp and editor is cyberlink, he said that this program will not reinstall software not or the windows operating system.

  When I try to reinstall synaptics touchpad by reinstallation of hardware driver, getting the list of factory installed drivers. and it ends correctly and restart, once again, I see the same situation as it was before reinstalling.

  kindly help me by giving the valid link through which I can download the Recovery Manager validates windows 7 64 bit or offering a solution for this problem.

  Thank you

  Original title: maintenance

  Given that most of your problems is related to HP, it is best to contact the HP support:

  http://support.HP.com/

  To defragnment, you should have little empty space. Try running disk clean in the disc you have questions first, then defragnment.

• communication problem with smart cameras

  Hello
  I am currently using VBAI 2010 with my smart camera and for the exchange of variables I use the function CNVCreateWriter to contact CVI 2010. It works fine when I'm in the configuration interface. I can use and modify all the variables with no problems.

  But when I switch to the control interface I can't modify variables more. By using the CNVCreateWriter function, I get the error message: RUN-TIME ERROR NO FATALE: "Camera_Api.c", line 130, col 14, 0x0000107C thread id: CNVCreateWriter function: (is-6345 return value [0xffffe737]). Cannot complete the operation within the specified time

  Someone know why it works in the configuration interface, but not in control in the real world interface?

  by the way: I can't use VBAI 2011 right now because we do not yet have a license for it

  Thanks in advance
  Oliver

  In configuration mode, things run slower on the smart camera because synchronize us execution with the update of Windows information on execution of State step, etc. When you run in inspection mode, it runs as fast as possible, so it may not be as many processor available time to process access requests to your application of C variables. Is the acquisition of your inspection triggered images or go faster the smart camera can possibly go (i.e. not triggered immediate mode)? If you're in free run mode, what happens if you change to wait next... This can give the processor a little more time to update the variables requests while he's waiting for the image to be acquired. Another way to test this theory would be to put one step behind in your inspection and see if it works (starting with 100ms and if it works, check out how small you can do).

  Something that could also help is to define the variables on your host machine and in VBAI a variable of network that binds to the variables defined on your PC. In this way, the variable engine shared on RT doesn't have to manage the updates from your PC, as well as updates of VBAI, as well as the execution of the inspection as soon as possible, and your C application should not have problems to access the variables on the same machine. This means that your PC needs to be up and running when your control is running on the smart camera or there is time-out errors to access variables... but this may be good for your application. Here is a nice document that speaks in depth of shared variables.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4679

  Another option could be to use TCP, series, Ethernet/IP, or some other variable VBAI read/write Protocol.

  Hope this helps,

  Brad

• See 5.1.2 problem with smart cards - reader to not see Office.

  Hi all

  We try to roll an office linked Clone pool that is used by our service accounts and as such, they need to be able to use for banking smart cards. We have installed all the necessary software on the machine of model (GemSafe Gemalto) and also one of our Thin Clients (Wyse V10L or C10LE) connected to the model directly via RDP with the card reader chip attached to ensure that different drivers installed correctly and all is well, the virtual machine is able to see the smart card reader.

  The problem comes when spread us these machines up to the pool, the smart card reader is not detected at all. We tried to connect from the Client light view or via RDP directly to one of the linked Clone desktops and both meet the same problem, that is, the drive is not seen at all. If we plug/unplug the drive of the Wyse terminal we see it be detected in the log of the events on the Client itself.

  Can what tools or newspapers we use side view or VMware to solve this problem?

  To confirm, in the settings to connect to the server by smart card authentication is set to optional. In Global political USB access is set to allowed.

  If need more information please ask and I will be happy to provide it.

  Thanks in advance.

  Right, we got to the bottom of it... and I am kicking myself!

  There is a GPO side configuration of the active computer. Administrative Templates/Windows components/Remote Desktop Services / Remote Desktop Session Host / Device and resource Redirection - do not allow redirection of card device chip.

  GRRRR!

• Problem with smart connector

  Hi all

  I use my iPad Pro for a while now with the smart connector. Today, however, I noticed that the Smart keyboard did not respond to my entry and I kept getting the error message "This accessory is not supported by this device."

  When took a glance t the smart connector on my iPad I noticed some discoloration, almost as if it was burned. Can someone please help me understand how or why this might have happened? He never fell into the water or something else besides.

  Ill put a picture below. Thanks in advance.

  

  Hello. When electrical contacts carry the current, they may collect certain chemicals from the atmosphere. This does not mean that your air is bad, it happens everywhere. Try to clean the contacts gently. Be sure to check each on the keyboard too.

• Problems with sharpening CS6

  When I try to sharpening in photoshop with smart sharpen or emphasis on a separate layer, the image preview OK looks. When I click OK to apply and sharpening program runs, the image reverts to its State not accentuated.

  What is meant by separate layer?

  Of course, sharpening can do alone is magic on the layers containing pixels. So is the layer you're sharpening a duplicate of another layer?

  Nancy O.

• Windows 7 problem with Kodak scanner i2420 - software Smarttouch

  Hello, someone had a problem with this kind of scan? On my desktop, there is a problem with smart touch, whenever I scan I have to restart or relog into a computer one then try again... Sometimes it works for a few hours, but sometimes I scan 1 or 2 pages and then stops scanning... The driver must have the connection, because there the scannner is a green arrow for connections... My computer is a HP and windos 7 Pro is instaled. I have checked the event viewer, but found nothing... I disabled the antivirus protection, but the problem is he stil... I know that this is not the right forum, I don't end protected by a kind of kodak support forum or something, maybe someone faced this problem?

  Thank you for your answer.e

  Hello

  Yes, you are right that this is not the right forum to ask about Scanner Kodak. If you were not able to find any support for Kodak forum so here are two links that might help you to achieve them and find answers to your questions.

  For the KODAK consumer product support

  Kodak FAQ

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Problem starting Smart View

  Hello

  I have a problem with Smart View, which disappears into the launch of Office.

  Can you help me solve this problem?

  Thanks in advance

  I use Smart View 11.1.2.5.000

  and office 2013

  Have you read and tried the following Oracle support doc - Smartview tab disappears from Excel (Doc ID 1991963.1)

  See you soon

  John

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.

• Problems with the maintenance of my 32D3453DB Smart TV connected to the internet

  Hi all

  I recently bought a Toshiba 32D3453DB Smart TV, but whenever I turn it on, it says wifi dongle has been removed. Then whenever I try to connect to the portal of Toshiba, he said: no internet access, please check your network settings. When I check my network settings, it says not connected wireless device. Then a few seconds later, it connects automatically without me pressing anything

  I always click on network settings to connect to the portal.

  Anyone know what is happening here? It is so annoying to have to go into the settings of network, I want to access the portal.

  Thank you.

  This looks like a problem with the connection of the internal Wifi PCB. Suggest you to contact the hotline and ask for inspection of the material by your local Toshiba service partner.

• Smart Safari search bar, problem with the option 'include suggestions for Safari '.

  Hi all

  I am facing a problem with the search bar Safari Smart of yesterday (January 26, 2016).

  The search bar doesn't work anymore, I can't type, or search or write an http address either. I can only navigate by selecting a bookmark.

  Go to preferences I have all the people with reduced mobility and the disappearance of the problem.

  Then try to isolate the problem, I've found it comes to the "include suggestions of Safari" option in the smart search options.

  Anyone had a similar problem, or have any suggestions on how to get it back to life?

  I must say yesterday, everything working, I have not installed anything new on my Mac.

  Thank you very much!

  Kind regards

  S. Luca

  Try the following steps:

  A possible solution to the problem of address bar: disable the Safari Suggestions

• WW146AV: Problem with HP Media Smart Photos

  My HP Media Smart pictures has suddenly stopped working.  When I try to open my pictures, it stays on for a few seconds and then closes.  I think I need to re - install the Media Smart Photo software; However, I have to uninstall the old software before I can re - install.  I will not lose the pictures that I previously imported into Media Smart?

  Second question: If someone has had this problem with the closure of news media Photos Smart after a few seconds?

  Windows 7 64 - bit;    Laptop HP Pavilion dv6t-3100

  Hello

  It looks like existing MediaSmart Photo installation is damaged, but the software indexes only the pictures that are on your drive hard reader, so uninstall and then reinstall this product will not result in the loss of all images.

  Note that, once the reinstallation is complete, launch the software and let it re-index your multimedia files - this may take a few minutes depending on the number of images.

  Kind regards

  DP - K