Problem with sound and video in AE

Similar Questions

• Problems with sound and Audio - realtek hd audio is not compatible for the audio device

  I use Windows XPand receives my sound and audio to work, I got a lot of response to this problem, but not the right answers, I got my sound set correctly but my audio does not work. In my default audio device is defined as realtek hd audio that is not compatible for the audio device, I tried to remove it without any success because I don't know what else can be done to solve this problem. I did an update can also be found a update driver for my sound card in windows. I also run microsoft fixi it and said that my default audio device is wrong, I tried to change, but nothing seems to work. Before that my computer was working fine and now all of a sudden nothing works. Everthing is up-to-date on my computer except the I'm having problems. all I ask you, how can I removed realtek hd audio since I graduated from the audio device by default.

  Thanks for a quick reply.

  Hello

  You will remember to do recent changes to the computer before the show?

  I suggest you to download and install the latest driver audio realtek for Windows XP from the link and check if the problem occurs:

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Equium-A100-147 - broken sound and video

  Hello world

  I have the satellite A100-147, its working well for the past couple of year.
  But in recent weeks has get problem in sound and video (broken sound and video).

  The sound is breaking and sometimes uable to listen + video and so delay breaking due to her with so much sound so slow EEG distortion etc...

  This remains even after the new Wind XP (format HARD drive) installation impossible to fix installed new drivers.
  Shows Device Manager all drivers including audio and video work ok, nt know what who is problem please help me.

  Thank you.

  Have you noticed the high HARD drive activity when this happens (blinking HDD LED permanently)?

• Problem with youtube and other video sites

  I have a problem with youtube and other video sites:

  Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

  I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
  

  I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

  GRTS,
  agrash

  I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

• Skype 'problem with sound recorder '.

  After working perfectly for months, when I now try to use Skype I get the above message.  CD works perfectly all the other its OK.  Skype gave me a chapter and verse to uninstall and reinstall Skype without change.  I guess the problem is in the web cam that contains the microphone and there is no purple light on that.  What can I do else?

  After working perfectly for months, when I now try to use Skype I get the above message.  CD works perfectly all the other its OK.  Skype gave me a chapter and verse to uninstall and reinstall Skype without change.  I guess the problem is in the web cam that contains the microphone and there is no purple light on that.  What can I do else?

  "Problem with sound recorder" suggests that there may be a problem with your input device.

  Open Device Manager (right click on my computer > properties > hardware > Device Manager) and search for "imaging devices". Click on the + to expand the category.  There is a warning (yellow!)? Right-click and select Properties.  Is it the box at low say "use this device (enable)"? If not, do so and click OK.

  While still in the Device Manager, click on the + next to "Sound, video controllers and game."  Locate the entry of your webcam microphone. There is a warning (yellow!)? Right-click and select Properties.  Is it the box at low say "use this device (enable)"? If not, do so and click OK.

  Take a look at control panel > sounds and Audio devices

  Click on the tab "Audio".  What is the default device for sound recording?  It should be your webcam; If this is not the case, adjust it using the drop-down list box.  Same thing for the "Voice" tab and the default device for voice recording.  Be sure to click on the "Apply" or the OK button.

  Click Start , point to programs , point toAccessories , point to entertainment and then clicksound recorder .  That you get error messages when you open or you try to open the sound recorder? If so, please include the entire message, without paraphrase, in your response.

• Sound and video in youtube and windows media player jerky

  Hi all, hope someone can help me

  right, basically when I watch videos on youtube, they start well, but all throughout the video, the sound starts stuttering / video starts stuttering or cutting don't know what you call and he also stutters my mouse.

  Now this problem as it was the case for some time and I don't know why

  in any case in the last 2 weeks or so, because I watch movies saved on my pc I watch with Windows media player and it is this same like youtube, the sound and video stutters/restless

  now I have some advanced installed package cole2k media codec (iv always used it with no problems so im guessing that isn't the question.)

  I tried to update my sound and drivers in the Graphics Device Manager but he says they are up-to-date,

  I have the latest version of windows media player.

  I have the latest version of the flash player

  the codecs are so far

  all audio enhancements are disabled in the speaker settings

  my system is

  Windows 7 ultimate 64-bit

  Asus p5kc motherboard

  2 GB corsair memory

  Intel quad core q6600

  If you need more information to help me please ask, I just solve this problem, iv never had before

  Ive had to repost this question because I have people stopped talking last time I asked, and I really need to solve this problem please someone help me

  Hello Matt,

  No, sorry, we do not support remotely. If you want, and are able, you can always do a video or take snapshots of your desktop and post a link to them here. A lot of people do.

  Another thing to try that I had some success with is download and install a new set of codecs. This is the 64 Bit freeware game that I use on my bench, give it a try: http://download.cnet.com/K-Lite-Codec-Pack-64-bit/3000-13632_4-75157090.html (make sure to use the Direct download link).

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• Problem with Skype and Windows 8

  Received a new computer with Windows 8.  Skype came on the computer and worked great for a day.  Now it shows people I'm "unavailable" even if I'm registered.  When I make a call, it sounds just and rings and the person I call does not get notification.  Should I uninstall the Skype that came on the computer and download another version?  Any suggestions?  Please make simple answer - I'm NOT techie and I need Skype to work for my company!

  You use the Skype app?  If so try to install Skype to office and use it from the desktop.  The apps are a little more prone to disorder compared to the fuller program.

  How the desktop version of Skype on Windows 8?

  https://support.Skype.com/en/FAQ/FA12162/how-do-i-get-the-desktop-version-of-Skype-on-Windows-8

  You can also restore the system to use to return to happier times.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  See if the program can diagnose any problems with applications and correct.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Another third-party program may be causing a problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

  These options are also integrated to Windows 8.

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.

• problem with java and pogo games

  I use mozilla, and now with the problems with java and hackers cannot play my pogo, what can I do? I disabled my java I tried java 6 does not work or is not safe, what is a safe way to play games on pogo using java?

  Pogo.com is determined as a website SAFE to use Java with Mozilla Firefox?

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935