Problems with the Activation of Windows 7 Professional
Hello, for a long time, my windows was genuine, but then I ran SpyHunter 4 to end a virus in my computer. But then I had to reset the computer, and then, the windows became a pirate and showing 7601 compilation and I started getting messages that I might be victim of falsification of software. Then, I clicked on the link to activate the window again. And then, I downloaded the WindowsActivationUpdate.exe, and when it ended, I have zero crashed my computer and I received this message, but the windows was always not authentic. Then I went to microsoft.com/genuine and tried to launch the legitcheck.hta, it starts and says that the validation of the window is current and recommended that I do not have to navigate beyond this page. But then, after awhile, it gets with and shows the following script errors:
Line 14
Character 41318
Line 11
Character 102675
Line 1
Character 15126
Line 6
Character 31
Line 0
Character 0
Line 2
Character 1
And then it becomes white forever. I tried to run the MGADiag.exe and here is my diagnosis:
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - CM74G - RPHKF-PW487
Windows product key hash: 71BRYMECVaSXedfumfu8zryHJVY =
Windows product ID: 00371-177-0000061-85051
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {163752C2-0AB7-4A81-9190-57AC32A7D366} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_ldr.160408 - 2045
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Opera\launcher.exe
Download signed ActiveX controls: allowed
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
Other data-->
Office details:
Content Spsys.log: 0 x 80070002
License data-->
Versão Serviço licença software: 6.1.7601.17514
Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, retail channel
Identificacao da Ativacao: e838d943-63ed-4a0b-9fb1-47152908acc9
Identificacao da size: 55c92734-d682-4d71-983e-d6ec3f16059f
Estendido PID: 00371-00170-177-000006-00-1046-7601.0000-0242016
Identificacao da Instalacao: 011474361013629363953701508091790880199835132104999472
Do Certificado Processador URL: http://go.microsoft.com/fwlink/?LinkID=88338
URL Certificado da Máquina: http://go.microsoft.com/fwlink/?LinkID=88339
Da licença of Uso of the URL: http://go.microsoft.com/fwlink/?LinkID=88341
URL do Certificado da Chave Produto (product key): http://go.microsoft.com/fwlink/?LinkID=88340
Chave Produto (product key) Parcial: PW487
Status da licença: calculated
Razão da calculated: 0xC004F009 (o periodo Armony expirou).
Contagem remaining rearmacao do Windows: 0
Confiavel Hora: 14/07/2016 13:31:27
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C532
Beyond: 0 x 0000000000000000
Event timestamp: 7:14:2016 13:23
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
--> HWID data
Current HWID of Hash: PAAAAAEABgABAAEAAQADAAAAAgABAAEAln36/sIWNidiNErd9OPg2 + oC4DRyVhqAumU + k7dYSBLGni5z
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
ALASKA APIC HAS M I
FACP ALASKA A M I
HPET ALASKA A M I
ALASKA MCFG A M I
SSDT IdeRef IdeTable
SSDT IdeRef IdeTable
SSDT IdeRef IdeTable
ADELINE ALASKA A M I
And I can't press the button 'solve '. Could you help me please?
PS: I downloaded all of the Opera browser, also, I am of the Brazil.
My father lost the key. But I managed to post anyway. I did this: before, my computer has lost its properties of activation, I saved the installer of Windows 10 and then, I got a Windows 10 key program necessary to update to Windows 10, and now she's authentic. But thanks for the help guys! Should I delete this post or something like that?
Tags: Windows
Similar Questions
-
Problems with the activation of Windows XP 2002
Help!
Is there someone out there who can help me solve this problem?
I have a PC with Windows XP Professional 2002, Service Pack 2, control my LC - MS instrument that uses the MS Xcalibur software. Four weeks ago, I had a PC crash and re installed Windows XP by using the CD of Installation Re. On Thursday last week, he came a message that Windows must be enabled. I tried by phone, but my install ID has not been accepted. This PC came with Win XP is already installed. I find it very strange that it should be a problem to activate it once more!
Can someone please help me solve this problem?
It is very important to me, because the PC is to control the instrument SM - which is the work horse in my business.
Best regards
Gunnar Hagelin
Aquila Pharma Services AS
Norway
Moved to other/unknown install, upgrade and activate Forum.
Hi Gunnar,
Apologize for the delay in response. You can get the XP operating system correctly using the Activation of phone as described in the following article:
How to activate a Microsoft product using Microsoft Product Activation Center
Back to us for assistance.
-
Problem with the upgrade to Windows 7 Professional to Windows 7 Ultimate
Hello
My Dell laptop came pre-installed with Windows 7 Ultimate 64 - bit version. But there was a hardware problem, and I had to re - reinstall Windows 7 on my Dell laptop. But then, without knowing it, I installed Windows 7 Professional 64-bit (for which I had the key too) & began to work on it. Later, when some drivers were not installed correctly because of compatibility issues, I realized the truth.
Then I tried to update my Windows 7 Professional current operating system to Windows 7 Ultimate-operating system by using Windows Anytime Upgrade without having to re - install Windows from scratch, I have so many applications and data on my laptop now. And I used the key of Windows 7 Ultimate version I have with my Dell laptop. But the key is not be accepted by the Windows Anytime Upgrade application and the following error message is displayed:
"Enter a different upgrade key
The upgrade key you have entered is an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. "
Please help me in this regard to solve this problem so that I can improve my Windows 7 operating system without having to re - install from scratch.
Thank you
Romaric
Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and system integrators or keys, this applies also to VL (Volume License), - MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.
The key that came with your mobile PC is an OEM key, which most likely why it fails to upgrade.
J W Stuart: http://www.pagestart.com
-
Problem with the activation of windows 7
Hi, my laptop is using Windows 7 starter 32 bit. He saw error and had been repaired once, but still having some questions such as:
1. cannot install some applications & he said... 'is not a valid Win32 application ".
2. keyboard Fn key cannot be used
3. He said that my Windows 7 not genuine
4. sometimes, can connect to the projector via a VGA cable and sometimes impossible to connect
5. sometimes the Microsoft Office applications cannot be opened, but sometimes it can be opened
I have a few questions:
1. how to make reactive my original Windows 7 starter edition? Since I can remember, technitian which difficulty my laptop had been tempted to reactive my original Windows, but it will be not active & still ask for activation of the Windows operating system
2. how to fix the keyboard Fn key?
3. is there need of all drivers to install for VGA projector & to install all the applications that I want?
4. by setting activation of Windows 7, Microsoft Office can always be opened without any problem?
Sorry for my English is not my mother tongue. I wish I can get the answer as soon as POSSIBLE. Thank you
Honestly, it looks that your system needs a new reinstall of Windows 7. It should reinstall applications such as Microsoft Office and drivers for devices such as your scanner, printer. If you wish not to do this, follow these steps:
Check your hard drive for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
then
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrityRestart your system
Also to perform a clean boot and see if things improve:
You should also check to see if you have installed any rogue programs:
Click Start, type: programs and features
Press enter
See the list and uninstall programs, you are sure that you may not be installed.
See also:
How to speed up your Windows 7 system:
http://techingiteasy.WordPress.com/2010/01/11/speed-up-your-system-for-the-new-year/
Regarding the reactivation:
Try the following:
Click Start, right click on computer
Click on properties
Scroll down to the Windows Activation
Click on the link 'change product key '.
Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.
COA certificate of authenticity:
http://www.Microsoft.com/howtotell/content.aspx?PG=COA
??
What is the certificate of authenticity for Windows?
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
You should also check the updates for your drivers:
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
I bought Parallels for my Macbook and moved my Windows to him, but after a month or two, I was invited for a product key that I have written, but was rejected and I have since then been locked my window and my data lost as a result, I have an installation disc and product key that I "KNOW" is correct doesn't work ' ". Someone please tell me what the matter, is because I'm seriously at my wits end.
The problem is not a software but a licensing of one.
Your existing OEM license cannot be transferred to a new machine--and it is difficult to do a upgrade to a non-genuine system (by design).
You always have your machine 'physical Windows' available? He's still in the original configuration that you want to transfer?
Apply you the full Ultimate who license and activate it, then repeat the virtualization
The new virtual machine will still complain of activation status initially, but you will be able to reactivate in the virtual environment.
You then have to take back the physical machine to the Home Premium of origin by a reinstall license using recovery madia or sale at retail or restore an image from before the upggrade.
-
Having a problem with the activation of Windows 7 Home Premium
Is there a way to "activate" my Windows 7 Home Premium 64 - bit legitely after installing upgrade as full version copy, but it was only a CD upgrade, using the old hard drive to check the previous version of Windows (XP) or do I have to buy a full copy of detail? I own is no longer my Windows XP cd that I had used on the original hard drive I recently replaced due to failure.
problem solved :).
-
Regarding problems with the drivers of Windows Xp professional
Hello:
Please read this guide on the link below for information on how to install the audio driver. It is difficult to do.
Look under the section titled models difficult.
Find the driver for the wireless card should be relatively easy if you post the ID of the hardware for it.
Go to Device Manager and click the wireless card which need pilots. Then click on the Details tab.
After the string of characters you see here.
Paul
-
Problem with the installation of Windows XP on the Satellite A200-1RK
Hello!
I ve you have a problem with my laptop.
I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
Why?
Can someone help me?Maybe I can use drivers from another laptop A200 series, but which?
Hello
a good explanation how to install XP on a SATA machine can be found here:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342Welcome and good luck
-
I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)
Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.
-
I have a problem with the Activation of the key window expiring.
Original title: recovery partition
Hello
My Windows 7 ultimate activation code has expired, I was wandering if, in case I do a restore system from the recovery partition on my PC I could get it to work again for another year. Thank you.
Hi Casperthe,
If you had a real computer of Windows 7, or a valid Windows 7 product key, try these steps and check if it helps. A recent hardware change can cause this problem. I suggest you activate Windows 7 manually (activate by phone) and check if it helps.
a. click Startand in the search for box type: slui.exe 4
b. press the 'ENTER' key
c. Select your 'country ' in the list.
d. Select the "Phone Activation" option.
e. stay on the phone and wait for a person to help you with the activation.Check out the link for more information:
How to activate Windows 7 by phone
http://support.Microsoft.com/default.aspx/KB/950929/en=us
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
PROBLEM IN THE ACTIVATION OF WINDOWS 7 STARTER
I have the original CD of WINDOWS 7 and the original product key, but when I activate windows online. A context menu appears and displays the following message "THE PRODUCT KEY YOU TAPE cannot BE USED to ACTIVATE WINDOWS on THIS COMPUTER"
I ask why this is happening I formatted my PC several times with this CD and this kind of problem never came.
Help, please
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Original title: Net User ID & Net password
After the upgrade from Vista to W7-64 CV, I have a problem with an active WiFi Seagate GoFlex TV Media Player asking for a "Net User ID & Net password" to log. I used all imaginable combinations of IDs & passwords, but they all lead to logon fails. I'm almost certain that it is a W7 security problem because others with the same players who went to W7 face the same problem. I found many supposed fixes online, but none works.
I am aware that MS W7 works as it should and Seagate is not their problem, but if anyone can recommend a change of security to help this issue, I guarantee a pass towards the sky.
PS: All the sharing, etc. continuously. are installed as they should be.
The only reference to Net User ID and password I can find is on page 46/47 of the User Guide. If this is not the user name and password of the Windows account that you want to share files with, I don't know what it is.
I guess patches that you tried to include those that are mentioned here:
I would have suggested the registry change.
It might be worth checking that you have the latest firmware, just in case.
http://knowledge.Seagate.com/articles/en_US/FAQ/216931en?language=en_US
-
original title: google analytics popups
Ive been having problems with the Google analytic pop-up windows all of a sudden now pages break or redirected, I've ran Malware, Windows Defender, a direct care, Avira, Avast and F-secure, and nothing seems to have read on other forums to help, that his may be a Trojan horse: Trojan.osx.Dnschanger.B... ive also rebooted my router as suggested in some forums , but nothing seems to help?
Hi NicolaaTC,
See the links below and check if it works.
What is the browser hijacking?
http://www.Microsoft.com/protect/terms/hijacking.aspx
Difficulty of your web browser hijacked
http://www.Microsoft.com/security/spyware/browserhijacking.aspx
-
Problems with the upgrade from Windows Vista to Windows 7 error
I try to upgrade Vista Business 32-bit Windows 7 Home Premium, but I get an error at the beginning of the installation message saying "Windows could not retrieve information about the disks on this computer. After clicking on the close button, its takes me back to the opening screen. Its a laptop with 3 GB of RAM. The program compatibility tells that should work, can anyone help?
Are you trying to upgrade Vista while it is running or are you boot from the Windows 7 DVD? Note: Windows 7 Home Premium requires an installation "Custom"and clean up as there is no path inplace upgrade (see below).»
Windows 7 system requirements: http://windows.microsoft.com/en-US/windows7/products/system-requirements
1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
16 GB of disk space available (32-bit) or 20 GB (64-bit)
(Note: 16 GB is a strict minimum and unrealistic, suggests at least 32 GB or more)
Graphical device DirectX 9 with WDDM 1.0 or higher driverWindows 7 upgrade paths
Microsoft has released a downloadable document from MS word with a list of paths to upgrade to Windows 7.
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e170eba1-5bab-401F-bbf5-00f0ee7fe0fb.
Windows 7 upgrade paths
http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspxDecrypt Windows 7 upgrades: the official rankings
http://mossblog.AllThingsD.com/20090804/deciphering-Windows-7-upgrades-the-official-chart/
(Save the graphic, and then open it using a photo editing software or Viewer to expand to a size more readable)Which is right for you?
http://Windows.Microsoft.com/en-us/Windows7/products/compareList feature that provides each edition of Windows 7:
http://www.SevenForums.com/tutorials/14422-compare-Windows-7-editions.htmlWindows 7 Professional upgrade - Vista owners: be aware that the upgrade to Windows 7 Professional can be used only to perform a upgrade in place for computers that have Vista Business Edition. Unfortunately there is no indication on the box or retail in the EULA/license restrictions of invalid paths to upgrade to Windows 7 Professional.
http://www.PAGESTART.com/windows7proupgade.htmlUsers of Vista Home Basic, your choice of upgrade is: Windows 7 Home Basic Edition, Premium 7 or 7 Ultimate
Users of Vista Home Premium, is your choice of upgrade: Windows 7 Home Premium or Ultimate 7Users of Vista Business, your choice of upgrade is: Windows 7 Professional, Ultimate or Enterprise
Users of Vista Enterprise: only one way of upgrading that is: Windows 7 Enterprise
Vista Ultimate users: once again as a way of upgrading that is: Windows 7 Ultimate.J W Stuart: http://www.pagestart.com
-
problem with the installation of window package
Impossible to install, i-tunes, quick time and I downloaded Security software. Error message indicates a problem with the windows package install. On Vista, this is a fairly new problem
Thanks in advance
JackHi Jack8053,
Thank you for visiting Microsoft Answers.
· The error message you get when you try to install a software, what exactly?
· Remember to make changes on the computer before this problem?
It seems to be that some of the files windows install is corrupt. I have a few steps that might help you to solve the problem:
Method 1
Make sure that the Windows Installer service is running.
1 open run and type services.msc, and then press ENTER.2. in the services window, locate the Windows Installer service in the services list.
3. check that the status is "started". If the condition column is empty,
Right-click Windows Installer, and then select start.
4. change the Startup Type to automatic (default is Manual), then
Restart the computer.Method 2
Run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.
To do this, follow the steps below:
1. click on the Start button.
2. on the Start Menu, click all programs followed by accessories.
3. in the menu accessories, right-click on command line option.
4. in the drop-down menu that appears, click the "Run as Administrator" option.
5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
6. in the command prompt window, type: sfc/scannow then press ENTER.
7. a message is displayed indicating that "the system scan will start.
8. be patient because the analysis may take some time.
9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue.
10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
11. once the scan is finished, close the command prompt window, restart the computer and check.
For more information, see the link below:
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212
Method 3
1. If it does not help, try to uninstall Windows install using the Windows Installer Cleanup utility:Description of the Windows Installer Cleanup utility
http://support.Microsoft.com/kb/290301
2 restart the computer.
3. download and install the latest version of Windows Installer by downloading from the link given below:
Windows install 4.5 Redistributable
4. try to install the program and check that it works.
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer.
Maybe you are looking for
-
Download Messege appears to be blocked because of Norton email scanner
The problem started occurring a couple of weeks (I guess that the latest updates of Norton/Thunderbird). The program works fine however the aspect of substantive progress is stuck on "download message" and does not all messages to download.restart se
-
Not able to print the PDF with firefox 29,0 Preview pdf plugin. Why?
Not able to print the PDF with firefox 29,0 Preview pdf plugin. Why?
-
Helloin my old computer I have used to have the language settings in Office and independent Firefox (write in English in an and the Hebrew in the other, no need to spend). I recently changed computers with office 2010 and Windows 8. Now if I write on
-
How can I get rid of the Yahoo toolbar when using FireFox?
For some unknown reason, the yahoo toolbar gets somehow on my computer. How can I get rid of it please?
-
Several screenshots on Tecra A7 (Intel 945GM)
I have problems with my Tecra A7 to display using a Mobile Intel 945GM chip. At one point I started having multiple copies of my office on my screen - two down, two entering the bottom overall, with the top of the fifth and sixth copy. Initially it w