Several screenshots on Tecra A7 (Intel 945GM)

Similar Questions

• Tecra A8, Intel 945GM 90 degree rotation option is missing

  Hi all

  I tried to get the orientation portrait display, but characteristic of rotation of 90 degrees, or 270 degrees are available in the display panel.

  I installed the latest driver from the toshiba Web site but it did not help.

  Is there some hidden settings that I can change to activate the rotation of 90 degrees?

  Best regards
  Swav

  Hello

  Suite of properties Intel there is the solution for you. You can change the display position using the following key combination:
  Turn to normal: CTRL + ALT + UP
  Rotation 90 °: CTRL + ALT + LEFT
  Rotate 180 degrees: CTRL + ALT + DOWN
  Rotation of 270 degrees: CTRL + ALT + RIGHT

  Try it!
  Good bye

• Upgrade video driver Intel 945GM

  I've got an E1505 with Intel 945GM chipset ranked in the latest version from the Dell site. However, I have software that requires Shader 2 technology. Upgrade from the Intel site is not compatible with the Dell printer, so I am at a loss. My laptop stop the BSOD on igxpdx32.dll which is a file for DirectDraw, but there is nothing on this file either. Also completed an update of Directx without result. Any suggestions? Thank you!

  
  

• Driver problem Intel 945GM display after installing Vista on A100 PSAA8

  After the upgrade to Vista on Satellite * 207-A100 PSAA8E-180049EN *, display adapter "* Mobile Intel (r) Express Chipset Family 945GM *" does not work. In Device Manager, it says "* this device cannot find enough free resources that it can use." (Code 12). " By using the Vista driver from Toshiba Web site and also tired last driver from the Intel Web site without result. Re-installed all the Vista drivers in the order recommended on the site Web of Toshiba. Also tried several removal and re-additons of the different drivers, nothing works.

  If anyone out there has the same model, I would be grateful if you could send a screenshot of Device Manager (reduced to display the secondary devices under main devices). Also a second snapshot of Device Manager, showing resources (Device Manager / View / resources by type). My e-mail address is: [email protected].

  Grateful for any other ideas or suggestions.

  Hi Rave

  Thanks for the comments!
  I'm really glad to hear that you have installed all the stuff according to document Instructions of facilities.

  Happy new year!

• Installing XP on Tecra S5 - Intel Matrix Storage Manager

  Hello
  Im trying to install XP on a Tecra S5.
  As described in the manual, I have created a disk with Intel Matrix Storage Manager.
  With a floppydrive USB I tried to install XP with the F6 method.
  I could choose the suitable from the disk driver and was able to create partitions and format them.
  Some time later in the installation process, XP asks for the "Intel Matrix Storage Manager.
  in the A: drive.
  Although disk is still in the drive, there is no reaction.
  Even when I change the disc, nothing happens.

  Any ideas?

  Hello

  Start the installation of Windows XP Home edition again, and when necessary to load the driver from the disk using the F6 option. This will make the disk HARD visible for the installation of Windows XP Home edition. When the HARD drive is recognized properly installing WXP. Later when WXP is installed correctly you can change the structure of the partitions.

  I do not understand why is floppy disk suddenly not accessible anymore. Check the data recorded thereon.

• Tecra R950 Intel SSD 520 and SSD set password = F4 BSOD after reactivation

  Hello
  follwing problem:
  Tecra R950 with Intel SSD and HDD/SSD series 520 passes together = always F4 BSOD after activation of the standby mode.
  OK with no password set.
  OK with Hibernate.
  Same problem with iastor and msahci driver.

  Any ideas? Think it's a problem with the bios. He goes down the ssd when wakeup, same cannot write a dump of memory (error 0xc0000010), the necessary cold start-up.
  Steve

  Hello

  Replace the SSD drive?
  As far as I know a lot of the Tecra R950 was equipped with a 500 GB HARD drive.

  I could be linked to the SSD drive

• Tecra M10: Intel Proset Prelogon fail

  I have a Toshiba Tecra M10, which has an Intel(r) WiFi Link 5100 AGN inside.

  I have wireless installation before opening of session with Intel proset software worm 12.2.

  When I cold start and try to connect immediately he failed to open a session.
  If I'm cold starts, wait 10 minutes, it connects fine.

  Any ideas what could be causng this?
  Is there something to load before I login?

  I inquired with Intel too and waits for a response. By covering just the basics!

  Hey Montana

  Can you please try it for me?
  Can you check the WLAN functionality if you enable mode 802.11 g only?
  This connectivity problem there?

• Tecra A7 - Intel PROSet / Wireless does not respond to the stop

  Hello

  during shutdown of my Tecra A7 the Intel PROSet/Wireless does not react, but must be completed manually.
  The last such Intel driver published by Toshiba download would help solve this problem?

  Thanks in advance for your support!

  Best regards
  ClausP

  Hello Christmas

  You can try to remove Inter PROSet and use the Windows settings for WLAN configuration.

  I don't have this problem, but you can also try installing the latest version of the Toshiba support page.

• How to transfer several screenshots for slides

  I have 25 screenshots in a file I want to add to the slide in the order. I'll need to do that very thing several times, in many projects. Is it possible to transfer them somehow everything to Captivate 8 slides without manually it create slide by slide? To automate it somehow?

  Hello

  Try to create an "Image slideshow" type of project by clicking file > new project > Image slideshow.

  From there, you will be asked for the draft resolution. Once you set it and click OK, the operating system file browser should open and allow you to choose all images.

  Once they arrive, you might simply rearrange in the film.

  See you soon... Rick

• Tecra M5: Intel virtualization technology is really supported?

  Hello
  does anyone know if Intel VT is really supported by a M5? I enabled it in bios, but from a kernel xen would indicate that VT has been disabled in the bios. I updated the bios to 1.70 but still the same.

  Hello

  As far as I know to use this technology, you need an additional software like Xen, VMware or Microsoft Virtual PC.
  Well, most of the Intel CPU supports this technology.

  As far as I know this CPU to use it:
  Intel Core Duo: all models outside T2300E
  Intel Core Solo: Model Ultra low voltage
  Intel Core 2 Duo: all models outside T5500
  Intel Core 2 Extreme: all models
  Intel Pentium 4:6 x 2-models
  Intel Pentium d: 9xx pellets 915, 925 and 945-models,.
  Intel Pentium Extreme Edition: 9xx-models
  Xeon DP / MP: all models with "Paxville MP" - core and the series 7xxx
  Intel® Itanium® 2: 'Montecito' 98 model

• Tecra S3 - Intel PROSet/Wireless window does not respond after changing settings

  Given that I've updated the driver and the utility Intel PROSet version 9.0.4.17 driver and tool PROSet to version 10.5.0.1 for Intel BG2200 WLAN card to build-in the PROSet tool window freezes every time after that I changed a parameter (for example, by adding a new profile).

  Closing the window with ALT - F4 also does not work unless you kill the process in Task Manager.

  Is this a known problem or is there any group of fixes for the driver or the Intel PROSet tool available?

  Hello

  The ProSet utility is a clean product Intel and if there are updates you find on the Intel Web site.
  But in my opinion, there is only a corruption of installation.
  How do you install this app? Have you removed the old version first?

  I think that if you want to update the programs, you must always first remove the old version and then after reboot of the new laptop, you can begin the installation of the new version.

  You could use additional own program register as a CCleaner. It s a freeware application and it checks the registry for some corruptions.

• Tecra A3: Intel 2200bg card compatible with only 11 channels

  As we know Wifi network cards have Channel 13 (European version). Tell me if I'm wrong. I have wifi card Toshiba Tecra A3-184 with 11 chains only (American version). What I would do. I installed the new drivers bu t that nothing has changed.

  Hello

  I found this:

  The European Standard ETS 300328 allows for 13 channels. A card that is able to use all of the 13 channels is a so-called "ETS-map" These cards-ETS can be used in Europe.
  The Canada and the USA, there are only 11 channels authorized use.
  In Japan, there are 13 channels like in Europe.
  In order to use a WiFi card anywhere in the world, a standard of the so-called 'GLOBAL-Card' with 11 channels was created.
  Toshiba WiFi cards are "World-card" class standard, which are allowed for use in the world.

  Note:
  A class of 'World map' WiFi can not be improved to an ETS card with 13 channels.

  This info you can read here on this page:
  http://support.toshiba-tro.de/KB0/FAQ35002P0001R01.htm

• HP Compaq Presario V5000 Intel 945GM motherboard computer laptop - 430198-001What processors can be used

  HP Compaq Presario V5000 Intel 945 GM laptop motherboard - 430198-001, which processors support this mother borard, it says in the spec supports dual core processors, it is unclear at what speed or spec that it comes with a celaron, 1.4 ghz processor. the duel core processors up to 2.0 ghz GS, which I think it would support?

  You are the very welcome.

  Yes, the T7200 is nice because of the 4 MB cache and can run a 64 bit (not necessary and not recommended unless you can install 4 GB of memory or more) OS.

  The T2500 can only run a 32 bit OS, but it will certainly better than celery (I like to call them) processor you have in there now.

• How a slide background holds several screenshots?

  I was under the impression that each captured in a simulation the slide background is a separate screen capture. However, on one of my friends, it turns to the end and I find that I have no control over what I need. It doesn't have an icon showing that it is a complete movement of record, so I am rather confused as to what is happening here.

  This is a simulation where an error message appears and you click on the OK button. This a particular slide is displayed before the error, and in the end, the error box appears. I think that when the error box appears, a separate slide/screen have been captured. I'm having trouble because I can't time the clicking OK on the error correctly because it appears only at the end of the slide, no matter how long I do the last slide.

  I don't have the ability to re - register this simulation, so if you can help separate me these events/slides, which would be very useful!

  Thank you very much!
  JO

  Hello

  I think Adobe has even an article in the knowledge base on the phenomenon.

  Click here to see

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Tecra M5 - cannot install Intel graphics driver 945GM

  Hello

  A few days ago, I bought a Tecra M5 opportunity.
  When I received it, the HARD drive has been formatted and I had no CD with drivers from the laptop.
  So after a while, I found most of the drivers I need... only the driver for the Intel 945GM does not work, I tried the Toshiba homepage and the homepage of Intel, the two do not work...

  One of the Toshiba Homepage gives me the error "one or more files are damaged or are missing. The installation program will be interrupted. »

  [I found this Thread here: http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=83858], but I did not really help, but the problem seams to be the same.

  So please help me.
  Thanks to this day, to read my Post and try to understand my English (I'm German<><>

  Hello

  How have you tried to reinstall the Intel driver?
  Have you tried to do this UN Device Manager?

  Go to Device Manager, select the unknown device (appears if the driver is not installed), and then choose Update driver.
  Then choose the option of advanced installation, then Don t research. I will choose the driver. Point to the place where the driver package was stored and uncompressed.

  Usually, this should help to reinstall the driver.