problems with the administration console

Similar Questions

• I am running Windows XP and I'm trying to upgrade to Windows 7. There seems to be a problem with the administrator no no not the permission to create a file?

  I am running windows XP.  I try to install the upgrade to windows 7.  I was on the phone with technical support of 4 - 5 times, and they may not always help.  There seems to be a problem with the administrator and with not not permission to create a file?  I have a HP desktop computer. Can anyone help?

  original title: help with Windows 7 install

  Hello

  ·         Account administrator that you use?

  ·         You have the disc to install Windows 7 or upgrade disk?

  Follow these steps and check if that helps.

  Step 1:

  To see if your PC is ready for Windows 7, download free Windows 7 Upgrade Advisor. It scans your PC for potential issues with your hardware, devices, installed programs and recommends what to do before upgrade you.

  Windows 7 Upgrade Advisor

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Step 2:

  Follow the exact steps in this article and check if that helps.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  Note: Make sure that you back up all important data on the computer before you install Windows 7.

• I'm trying to download a game called football superstart, but there is a problem because when I try to open it there is a message that says that there was a problem with the administrator of the House

  OK im trying to download soccer superstar but I can download it but I can't open it because it shows a message that says that there is a problem with the House administrator I will try to find a solution to this problem can you guys please help me thank you.

  Hello

  1. could you give us the exact error message?
  2. based on what site you are trying to download and install the game?
  3 are logged as an administrator of the computer?

  Once the installation file downloaded, I would ask you right-click on it and select run as administrator and then check.

  I hope this helps.

• problems with the administrator account

  I turned on our computer and clicked on my profile which is also be the administrator account and the computer says "service profile Service user has no connection" "could not load the user profile.
  Can I use both the UserProfile with my children.  We tried to access the administrator account, but it requires a password that I don't think we have.  Is this some kind of virus that affected only the profiles?  That is to get the administrator account working again?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the administrator user account

  When I connect to my administrator user account a Windows Sidebar message immediately rises:

  "Settings.ini is being used by another process. Close the other program, and then click Retry, or click Cancel to exit sidebar. »

  The problem is that there is no other program to close so I click on no to cancel. There is also a message from Catalyst Control Centre (program of ATI technology video card) that comes immediately after the message of the sidebar:

  "The host application has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »

  I click Close Program, but no notice is. Try using Windows, I get the message "help topic is not found." I tried the system information (msinfo32.exe) and get the message "cannot collect information cannot access the Windows Management Instrumentation software.» Management of Windows files may be displaced or missing. » !!!

  All the above problem ONLY happens in the administrator user account. Both regular user accounts work fine. Windows help works very well, information system works very well!

  I'd appreciate any help to solve this problem of crazy.

  ZekeF

  If you "move" the files/folders to PUBLIC folders, you can then access them when you are in the new admin account and then you can place them in your personal folders.
  If you do not Move To and copy to options in your context menu, here is the tutorial to "help":
  http://www.Vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.html

  When you have completed the tutorial, try this...
  Right click on any folder/file > click Move To > scroll to the destination where will be moved to the folder/file > click on move.
  That's all. The file/folder is moved.

  Public folders are accessible to all user accounts on the computer.

• I have a problem with the administrator account.

  Original title: administrator account is down: no-show to secure boot, will not take password (no defined) to allow facilities. What now?

  I am the only user on my PC Windows 7 Home Premium and have been using it until as recently as an administrator. After learning that it was better to use a standard-privileges account yesterday, I went to the user accounts and brought a few changes, which I am not convinced that I remember exactly, but which provided for the creation of a new account administrator called "Administrator", giving this account a profile picture and changing my personal account with standard privileges. I may have set the password of the new account to be the same as the former, or may not have specified a password, but I know that I didn't not create a new password. Anyway, now I can't do anything that requires administrator privileges.  When the window opens to allow an action preferred by logging in as 'Administrator', or my old password or all simply hit the "Enter" button works. I know that this is the administrator account, I created, because there the thumbnail profile photo that I assigned to him. A used computer scientist Ophcrack successfully, which correctly specified the password of my account now-standard and said that the password of the administrator account was nothing. The newspaper in the boot prompt, administrator does not appear as an option in profile, and it does not appear in the start Mode menu safe either.  The situation is desperate now? What can I do? Thanks for any help!

  When changes to an administrator account, then the safe way goes like this:

  1. Create, test, and document an admin account to spare, even you have a spare House key.
  2. Change your normal administrator account according to your needs.

  If you don't take these precautions, then you can do this:
  1. Use your repair Windows CD to start the machine in Repair Mode.
  2. Use system restore to set Windows to a point before you did what you did.

• I have a problem with the Java Console is disabled in Mozilla Firefox.

  Original title: Microsoft asked Firefox to disable the Java Console. Why?

  Next to the Java Console in the folder extensions on Firefox, there is a note that says that Microsoft asked us to disable this extension and more information. When I click on details it is a microsoft page but no information. It also covers other extensions that are disabled. No way to know what is the problem? I have Windows 7

  Thank you

  Any problem in FF, see their help or Forums

  You have a reason to use any Console Java plug-in?

• Problem with the administrator account of the domain on Windows 2008 servers

  After changing our domain admin password, all servers 2008 report on the account locked when you try to connect.  The account shows not locked in AD.  2003 servers are not affected.  Anyone can shed some light on this problem?

  Hi patdav_adh,

  Your Windows is beyond the scope of what is handled in this forum of consumer. I suggest you repost among the public IT to Technet Windows Serverprofessionals. Thank you!

• Something wrong with the administrator?

  OK, so when I try to go on my computer as an administrator, it works very well for about 3-5 minutes. But after that, I can't use Ctrl + Alt + Delete, whenever I try to open the Internet, either Chrome or IE, it acts like it's going to open it, but not after 10 seconds. Also, when I try to go in Control Panel configuration, or any other document on my computer, it opens then freezes when I try to view another page, or even close. Now indicated previously I can't use Ctrl + Alt + Delete. What happens when I do, it displays an error message (cannot think of it at the top of my head) and gives me an option to press ok, that brings back me to my office.

  After all that, however, when I go into safe mode and change my Admin user status, for the standard user. Everything works the same, apart from the fact that I can't do things admins can do without a password. In fact, this is how I'm typing this, as a Standard user. If anyone can shed some light on the situation I would be very happy. The only thing I could think is that MSE has found a virus on my computer, but quarantined it. I could not remove without being in safe mode. Any help at all would be greatly appreciated! Thank you
  -Joseph

  Hi Joseph,.

  Thank you for giving us the opportunity to answer your question of Windows.

  I see that you are facing problems with the administrator account.

  The standard user account works fine.

  Method 1:

  You can run Windows Defender Offline tool.

  See the following link for more information about the same:

  What is Windows Defender in offline mode?

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
  
  Windows Defender Offline: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ
  
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  
  
  Try the SFC (System File Checker) scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  I suggest to create a new admin account and check if the problem persists, follow the link:

  Step 1: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2: If the problem does not persist in the new user account, and then copy the files from the existing to the new; profile Follow the link to do this:

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Please let us know if the steps above to solve the problem. Also if you need help on Windows, please keep us informed.

• Problem with editing the content in the administration Console

  Hi I have problems with editing the my site published in the administration Console.

  Everything what top an embeded google map works fine, but everything below is not clickeble/editable.

  Someone else has this problem, and you have any ideas on how to solve the TI?

  Hello

  Will you please try to remove the code embed to Google Map and then check, because it seems that the code used is in conflict.

  Also test with the Google Map widget in the social widgets.

  Thank you

  Sanjit

• I have a problem with the implementation of the administrator.

  Original title: can not become administrator on my own laptop

  When I try to define myself as an administrator on control userpasswords2 it says access denied and I have no idea what do I do

  Hi Lobik,

  Thanks for posting your question in the Microsoft Community Forums.

  From your post, it seems that you are getting the error message access denied when you try to set the type of administrator account.

  To change the administrator account type, you need to connect to the computer as an administrator. The default account created during installation time is the administrator account, try to connect with the administrator account, and then try to change the standard account for the administrator account.

  To change the user account ttype, please refer to this link:
  Change the type of user account

  http://Windows.Microsoft.com/en-us/Windows7/change-a-users-account-type

  It will be useful.

  Please come back if you have any questions about this question or any problem with Windows in the future and we will be happy to help you.

• A problem with the web by launching the EAS console - Urgent!

  Hello Experts,
  
  One of my clients has a problem with the web by launching the Regional service console. When tried to start, was inviting to install a .jnlp file. Customers already have Java 2 Platform SE Version 1.5.0 (build 1.5.0_13 - b05) installed on the computer. Make it necessary to install more than that?
  
  Version: 11.1.1.1.00
  
  Please notify. Thanks in advance
  
  Kind regards
  Jingle
  
  Published by: 637223 on January 14, 2009 03:09

  Hello

  They should be able to execute it, it took Java Web Start, which was part of the installation of the JRE from version 1.4
  If you go into control panel - java then java Control Panel click the java tab, under the JNLP section click the button show, if everything is correctly installed, it should show the versions and whether they are enabled or not.

  If they are enabled, then JNLP should work automatically, you may need to reinstall the JRE.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Start-up operations of the worksheet in the administration Console

  If a form that includes four or more dimensions that all the parents value dynamic calc, when these parents owned dynamic calc are selected for all dimensions and you press GO, spreadsheet operations are started in the background that could be seen in the administration Console. The problem is that they won't be stopped once started and this thing picks up the whole performance of the server, unless it is killed from the administration Console. This is the case with our Production Server.

  Another issue that could interesting is that our Production Server takes quite considerable time to retrieve the data of the members of dynamic calc compared to its exact clone on the Test Server where it works very well.

  Someone has an idea?

  Thanks for the reply. The cubes were same. I tried the restructuring of the database and this solved my problem. Thanks for your help.

  Kind regards.

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• My customer is having a serious problem with the Contact form Widget

  My Client is to have a serious problem with the Contact form Widget that I can't seem to figure out how to fix.

  I created a website for a client and inserted a widget of Contact form on the "Contact us" page Whenever someone uses the form, e-mail receive my client shows my e-mail address as the sender. So when they "meet" the email, the response is sent to me and not the person who sent the original message. This creates a major problem in that I get flooded with answers e-mail while my client's potential customers go without a response.

  When I look at ' Site Manager > email system > Workflow information > e-mail address on the site administration Console, it displays my e-mail information. This is what needs to be changed?  If this is the case, what needs to be placed in this field for the email address of my client receives presents information email senders in the field "from".  My client wants to be able to click on reply and the message sent to the right side. They would be very angry if should be cut and past shippers Correo electronico of the body text on all the contacts they receive.

  Their feeling is that if I can't find a way to make the contact form works as it should, then there is no need for them.

  Can someone help me understand this? I really don't want to disappoint my first client.

  Congratulations for your first customer! =>

  Looks like you can have your email in places where your customers email should be.

  Here are the places you need to change your e-mail address.

  First adjust the answering of your web form is your customer email. Screenshot: http://screencast.com/t/YWiZZ30E0jE and http://screencast.com/t/u4t69anTLR

  Second set Emails to come your clients e-mail system. Site management > system email > set default "from" e-mail. Screenshot: http://screencast.com/t/EAr2sfXk

  I always go through each email system and check the e-mail address after you set the default value. I found that it doesn't always change them for some reason any. Note: If you are on a lower to webCommerce plan your list can be shorter than what is shown.

  Make sure that the email you the list of customers is also an email they want in public.

  Also provide information on the TSA that thetrickster888 is good information.

  I hope this helps.

  Lynda