problems with the built-in spellchecker to ff 23

Similar Questions

• Problems with the built-in webcam

  I have a Toshiba laptop Satellite Pro A300. It has a built-in Chicony webcam. The webcam has stopped from windows startup. When I try to boot via the Camera Assistant Software, I get the following error message: "Webcam is either disabled or has failed." Please check your webcam settings. What can I do to solve the problem?

  Hi, SFRichmond,

  Start > type MsConfig

  Select the Startup tab

  Uncheck the box Camera Assistant Software

  Click on apply, Ok

  Restart the system

  Check: Do not show this again on the Configuration window of the system that appears at the start otherwise it will be you harass each reboot.

  Do you have Skype? Close it

  Search for an updated driver and install it.

  Bar close camera assistant

  Check this thread

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162029

  Error message when you connect a portable Windows Vista based computer to a docking station: STOP: 0x000000fe

  http://support.Microsoft.com/kb/934374

  If the previous step fails, then you will need to contact Toshiba support to see if they have an update for the web camera for Windows 7 64-bit.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Problem with the built-in SD card reader.

  Hello

  After many hours of searching through previous post, I am still unable to get my card reader built-in to read.  It worked fine for a while, and then all of a sudden it stopped.  I tried everything, different micro sd adapter mirco sd cards and also read the posts here.  So why I am now posting looking for any help there.

  Thank you.

  Ulster 03.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Z61m + Win7-> the problem with the built-in camera.

  Hello.

  Hi and welcome to the forum!

  Try to install the driver XP for the camera, if it does not then use Windows update, maybe it will install the driver.

• Problem with DPS built app sign in the process

  I'm running into a problem with the ios version of our DPS application.

  We build a right and iTunes subscription app.

  To try the payment custom, I sign in and out as many different users.

  A new installation of the application on the iPad, I connect as a user XYZ.

  Tapping on the machine shows the Disconnect option [XYZ].

  After Sign Out look, I'll then sign up as a user ABC.

  Tapping on the machine always shows the Sign out [XYZ] option.

  I expect the following Sign Out [ABC].

  
  

  Is this a bug? Know the cause? or I'm doing something wrong.
  

  This bug is a known issue. You can see the same problem in the ends of DPS when you connect (dps tips), disconnect, connect (bob bringhurst), and then sign in again. The original user is always displayed until the application is restarted. I don't know when this issue is scheduled to be fixed.

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• Some problems with the Camileo webcam

  Hello!

  as a first step, please excuse me for my poor English writing!

  I have a TV and it seems that many users in France have the same problems as me:

  * When I'm in webcam mode, I cannot use the microphone of the camileo, is this normal?
  * When I try to open my movies in windows movie maker, it crashes. What is the problem? It seems that the video format of the camileo is not recognized by this software,... strange!

  Thank you very much!

  Yann

  I saw this cam but I'm not familiar with the whole feature. The fact is that each webcam with built-in mic should offer its use with different applications such as Skype, MSN, ICQ and others.

  In my opinion, there is a problem with the settings and check these settings in the application, you use. In most of them, you will be able to select the sound source.
  All video format I can say that based on the description you can choose between AVI and MPEG4 format.

  By the way: you try to open the files saved on the HARD drive?

• Starting problem with the gray screen on iMac

  Hello everyone

  I'm a bit puzzled with a problem I'm having with my iMac 27 "a model late 2009, bought in early 2010, I had built at the time with 8 GB ram, 2 TB HD and fastest i7 Quad core processor available at the time.

  I'm running El Capitan, and all wise OS is perfectly up to date.

  The other week, after a systematic restart, I have a gray screen and little else.  Another reboot and everything was "normal", so I did not concern me unduly.

  Today, after that the Mac had been idle for a time during a call, the screen fell asleep as usual (I do not SLEEP the computer itself), but during his return and touch the SPACEBAR and key "ESC", the screen remains black.

  So I made a forced shutdown and restart.

  I get the screen gray and normal startup (no other sounds) chime followed by the apple logo and the startup progress bar.  He gets to halfway through the long, and then instead of bring to the top of the login page, it's just going to a gray screen Uni.

  So I restarted in safe mode, OK and ran disk utility a couple of times - at the first crossing, he noted, there a problem with the map of partition which can cause problems starting, but on the second passes and the following, everything has been noted to be OK - and the SMART status of disk has been verified.

  After a reboot - the same question as above - of carillon, gray screen with the apple logo, progress bar and then just a gray screen.  I did another secure boot and re-run of disk utility, rebooted into recovery mode and run disk utility.  And again, no problems reported.

  Another reboot and the issue was always there.

  So this time I rebooted into recovery again mode and downloaded a new installation of El Capitan.

  Unfortunately, there is no set - it is always start on a gray screen after the startup chime, the apple logo and progress bar.

  I have also removed all my account account startup items and disconnected all USB devices.

  I'm a bit lost for what to do next to be honest!

  Is there anything else I can do software wise, at home, or is it time for the repair material re shop perhaps?

  Thank you very much for your words of wisdom and support

  Kind regards

  John... :-)

  John here again: :-)

  Just a quick update which may help to determine what the problem is: I restarted in safe mode, after the reinstallation of the operating system was unable to initialize properly - grey screen again.

  However, as I have a home network, I found that I can not connect on the network with my MacBook Pro to the iMac, see all my files user on the iMac and even copy them across to the MacBook Pro with no problems.

  Everything on the iMac is saved via Time Machine on a Western Digital Firewire HD 3to.

  I also have uncompressed manual 'straight' copies of my music, movies, documents folders, etc, for an old time Capsule, currently acting as a bridge to my ethernet network wireless, and provide additional backup for those critical files - my music for example is ripped 350 odd CD, all legally purchased in ALAC on iTunes on the iMac - which represents a couple of months of work... lol... no way I want to lose that!

  So I'm a bit of a loss.  Disk utility reported no problem with the drive... I can boot into safe mode and recovery, but normal mode 'mode '... I always get the chime, the screen with apple logo and progress of the gray bar, then goes to just a gray screen instead of the login page.

  Help!

  My beloved Einstein had a hiccup!

  All comments appreciated and thanks again - hope this extra info helps

  Kind regards

  John... :-)

• Problem with the generation of multi-sinus wavefrom of random phase using PXI-5412

  Hello

  I am trying to generate random phase multi-sine waveform using the PXI-5412 14 bits 100 M/s AWG on LabVIEW8.0.

  The version of LabVIEW8.0 for the PXI-5412 comes with a sample VI on multi-tone waveform generation. When I tried with a different combination of frequency and amplitude, there is no problem with the sample VI.

  Because I need the phase to be random for each frequency component, I had tore the tone cluster containing 3 elements, i.e. frequency, amplitude and phase, which feeds the generator of signals, and rebundle the cluster with elements of reading a CSV file by using a loop, a fixed value amplititude and a number of random phase of the frequency generated by a random number (formula lournies elements (: pi - 2pi x r). When the waveform multi-sinusoidale generated on the PXI-5112 100 MHz Digital Oscilloscope, it was pointed out that the waveform would change with the tested frequency range.  However, the amplitude of the wave is always ~1.4V (guess that's always default to 1 V x sqrt (2)).  There is no question also when testing the same combination of frequency and amplitude by using sample VI without modification.

  Please find attached the VI of the sample, snatching up to the version and the CSV file I used. Is there something wrong with the table 1 d of the cluster of 3 elements that I built and assembled causing the signal generator to ignore the value of input amplitude and, possibly, the input value of the same phase (as it seems that the amplititude is always set to the default)?

  The other question that I found on the two sample VI and ripped version is on the news of sampling.  The waveforms appear on digital Oscilloscope PXI-5112 always default to 10 cycles no matter how changed the sampling frequency and the number of samples.  For example, if the frequency is 10 Hz, sampling frequency is 1000 Hz, and I put the number of samples to 10000.  I'm supposed to get 10000/100 = 100 cycles.  However, I could see 10 cycles no matter how, I changed.  What should be the correct way to change the number of cycles?

  Really appreiciate your help and advice. Thank you.

  1 phase unit is in degrees (-180 to 180), no - pi pi.
  2 standardize Waveform.vi always normalize your amplitude of the signal. You can remove it to use your desired amplitue, but must make sure that it is not above 5412 spec.

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• problem with the dell integrated webcam

  Hi guys

  I have dell inspiron 3542

  IAM facing a problem with my built-in webcam. whenever I run it it says connect a supported device.

  I use win 7 6

  bit

  Hi SAMAR-,.

  When the issue started? Which application you use for the webcam? Built in mic work well? The webcam is detected in Device Manager?

  Update the BIOS - http://dell.to/1TO5Xcf

  Run all windows updates and check again.

  Create a new account admin and check - http://bit.ly/1Bgok2R

  Run the test of the webcam and the microphone in pccheckup - http://dell.to/1NEc1Y4

  Restart button f12 system and press on start - choose the diagnosis. Let run diagnostic tests and if you encounter errors - take note of the full error even report for us.

  If the system is under warranty, write me a private conversation with the service number and contact details and attach a screenshot of the Device Manager with expanded imaging devices.

  Keep us updated.

• Problem with the video on the computer.

  Hi, my computer suddenly become glitchy and started screen tearing up about 20 minutes ago.

  I did a survey and found a dmp file that I believe is associated with the problem.

  This problem has never happened before, but I want to fix any damage in the future.

  Online Crash Analysis snapshot, presented by the OSR Open Systems Resources, Inc.. Primary analysis

  Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com)
  Online Crash Dump Analysis Service
  See http://www.osronline.com for more information
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
  Product: WinNt, suite: TerminalServer SingleUserTS Personal
  Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
  Machine Name:
  Kernel base = 0xfffff800`03063000 PsLoadedModuleList = 0xfffff800`032a6890
  Debug session time: Fri Sep 19 22:41:44.936 2014 (UTC - 4:00)
  System Uptime: 1 days 0:59:18.919
  *******************************************************************************
  *                                                                             *
  *                        Bugcheck Analysis                                    *
  *                                                                             *
  *******************************************************************************
  
  VIDEO_TDR_TIMEOUT_DETECTED (117)
  The display driver failed to respond in timely fashion.
  (This code can never be used for real bugcheck).
  Arguments:
  Arg1: fffffa8016a72010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
  Arg2: fffff8800ff9e5c8, The pointer into responsible device driver module (e.g owner tag).
  Arg3: 0000000000000000, The secondary driver specific bucketing key.
  Arg4: 0000000000000000, Optional internal context dependent data.
  
  Debugging Details:
  ------------------
  
  TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
  
  FAULTING_IP:
  nvlddmkm+1575c8
  fffff880`0ff9e5c8 ??              ???
  
  DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_TDR_TIMEOUT
  
  TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b
  
  BUGCHECK_STR:  0x117
  
  PROCESS_NAME:  System
  
  CURRENT_IRQL:  0
  
  STACK_TEXT:
  fffff880`0272e4f0 fffff880`0fd5a72b : fffffa80`16a72010 fffff880`0fda709b fffffa80`16a72010 fffff880`0fd28843 : watchdog!WdDbgReportRecreate+0xa3
  fffff880`0272ea10 fffff880`0fd5b3f0 : fffff8a0`11e66e90 fffff8a0`11e66e90 00000000`00000080 fffffa80`16a72010 : dxgkrnl!TdrUpdateDbgReport+0xcb
  fffff880`0272ea60 fffff880`0fd2f6b3 : 00000000`00000001 fffffa80`11fc9000 00000000`00000000 fffff880`0000009f : dxgkrnl!TdrCollectDbgInfoStage2+0x220
  fffff880`0272ea90 fffff880`0fd5bf43 : fffffa80`1191ea58 ffffffff`fffe7960 fffffa80`16a72010 00000000`00000000 : dxgkrnl!DXGADAPTER::Reset+0xef
  fffff880`0272eb40 fffff880`0f03803d : fffffa80`12608d50 00000000`00000080 00000000`00000000 fffffa80`1191e410 : dxgkrnl!TdrResetFromTimeout+0x23
  fffff880`0272ebc0 fffff800`0337473a : fffffa80`120a3ca0 fffffa80`1617cb50 fffffa80`0ca8c5f0 fffff880`0272ecd8 : dxgmms1!VidSchiWorkerThread+0x101
  fffff880`0272ec00 fffff800`030c98e6 : fffff880`03102180 fffffa80`1617cb50 fffff880`0310d0c0 fffff880`010b17e7 : nt!PspSystemThreadStartup+0x5a
  fffff880`0272ec40 00000000`00000000 : fffff880`0272f000 fffff880`02729000 fffff880`0781fd40 00000000`00000000 : nt!KxStartSystemThread+0x16
  
  STACK_COMMAND:  .bugcheck ; kb
  
  FOLLOWUP_IP:
  nvlddmkm+1575c8
  fffff880`0ff9e5c8 ??              ???
  
  SYMBOL_NAME:  nvlddmkm+1575c8
  
  FOLLOWUP_NAME:  MachineOwner
  
  MODULE_NAME: nvlddmkm
  
  IMAGE_NAME:  nvlddmkm.sys
  
  DEBUG_FLR_IMAGE_TIMESTAMP:  5414a236
  
  FAILURE_BUCKET_ID:  X64_0x117_IMAGE_nvlddmkm.sys
  
  BUCKET_ID:  X64_0x117_IMAGE_nvlddmkm.sys
  
  Followup: MachineOwner
  ---------
  

  This free analysis is provided by the OSR Open Systems Resources, Inc..
  You want a better understanding of the analysis of crash dump? Discover our kernel Crash Dump Analysis and Windows debugging

  Hi Summet

  Problem with the NVIDIA graphics driver

  Please visit the NVIDIA site and install the video driver

  Choose your graphic card model and download it and install it, I m Sure/Hope that will solve the problem

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Problem with the input query mode. FRM 41009, 40301

  Hi all
  
  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.
  
  Now, I've wanted handled. So I created a trigger of error in order to handle the error.
  
  IF ERR_CODE = 41009 THEN
  NULL;
  END IF;
  
  A problem is that when you use the null value, it will not terminate the mode of input query, and then I get frm-40301 error.
  
  Second, it's that I can't use exit_form in a trigger of the error.
  
  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.
  
  Another solution would be to put the following code in the trigger when key pressed for each button in the form:
  
  If: system.mode = "ENTER-QUERY" then
  exit_form;
  end if;
  
  But I don't want to reproduce this code in my form.
  
  Please can you give me an idea how to handle this correctly?
  
  Thank you
  Michael
  
  PS: Version of the form = > ORACLE FORMS 10g (Forms [32 bit] Version 10.1.2.3.0)

  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.

  What is the code in the trigger of your button When-Button-Pressed (WBP)? Maybe you should check to see if the form is in the Mode query in your WBP rather than try and remove the error? In other words, eliminate error - do not delete it. :)

  If you want instead to remove the error, there is a technique to built-ins call restricted to a trigger that does not allow them. Do this by the use of a millisecond zero Timer. For example:

  /* Sample On-Error Trigger */
  DECLARE
    n_err_cd   NUMBER := ERROR_CODE;
    t_on_error TIMER;
    ZERO  NUMBER := 0;
  BEGIN
    IF ( n_err_cd = 41009 ) THEN
      /* Create Timer to execute Exit_Form() */
      /* to Cancel Query-Mode. */
      t_timer := Create_Timer('ON_ERROR', ZERO, NO_REPEAT);
    ELSE
      /* Handle all other errors here... */
    END IF;
  END;
  

  /* Sample When-Timer-Expired Trigger */
  DECLARE
    v_Timer  VARCHAR2(30);
  BEGIN
    v_timer := Get_Application_Property(TIMER_NAME);
  
    IF ( v_timer = 'ON_ERROR' ) THEN
      /* Notice, the timer name is case sensative! */
      Exit_Form;
    END IF;
  END; 
  

  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.

  Well, it's just standard features of Oracle Forms. If you switch the Mode request form - you must run a query or cancel the query Mode! This is how it works. Your users need to understand that and accept it - just as they accept the functional also for other programs. ;) Another option would be to add a "Cancel request" button to your form and make it so it is enabled only when the form is placed in Query Mode. Just a thought...

  I personally prefer to prevent the occurrence of an error rather than remove the error. :)
  I hope this helps.
  Craig...

• Problem with the plugin Update Manager

  I'm having a problem with the update on my VC Server Manager (2.5 build 104215).  Update Manager is not downloaded updates.  In VC when I go to Plugins it shows that Updae Manager is installed and enabled.  If I remove the check mark for Enabled & then turn it back on, I get a message - "the server could not interpret the customer's request" - but the checkbox reappears.  I also have this message when I run VC on the server, but not from my PC.

  If I right click on the download VMware Update Manager update scheduled task and select Properties, I get a message - "the plugin for this task has not been saved.   All VMware services are started.  The Update Manager

  Update Manager is built 1.0.0.63972 and the VI client on the server is 104215

  Thanks for any help.

  He is now in place and running as planned?