Re: Satellite C650 - problem with the devices connected to USB ports

Similar Questions

• Problems with the internet connection, Aspire V15 - V3 - 575G

  Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

  The problems are the following:

  • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
  • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

  He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

  I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

  Thank you very much for the reply.

  Plese try this:

  device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

• Satellite A200 - problems with the AC adapter / CC

  Hello

  The problem concerns a Satellite A200 (PSAF6A-02H01N).

  Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
  But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

  The problem got worse now and the laptop will not load Vista end without crashing.
  We have now reduced the computer down to have only a problem when the power adapter is connected.
  The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

  The problem persists with the AC adapter is plugged in and the battery removed.
  The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
  The laptop will not work under the battery power for 30 minutes max.
  I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

  Is this only a problem of AC adapter or the problem with the laptop?

  Thanks in advance...

  The Canada Gazette

  I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

• problems with the internet connectivity and card # 2 microsoft tun miniport

  Hi, I have problems to connect to the internet and my laptop tells me them a problem with the modem / router. However, another laptop computer connected to the modem/router even works very well. in the Device Manager was an exclamation mark beside "teredo tunneling pseudo interface 10. then it disappeared and I found myself with an error with «#2 microsoft Tun miniport map» now his party in error teredo. I still only have a local internet connection i.e. no internet. not really have a lot of knowledge when it comes to computers. any help would be really appreciated.

  Hello

  You can try the steps in the similar thread to the next with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925?page=1

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Problem with the network connection security

  When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.

  How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?

  Can you give an example of the websites that you see this 'error' on?

• Satellite U500 - problem with the cooling system has been detected

  I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
  Before that, I would like to know if anyone has had this problem and if there is a software solution?
  HIERARCHICAL

  Check HERE to see if anyone else had this problem in the past.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• When I try to record photoshop mi account, there is a problem with the internet connection and I can't continue. How can I solve it?

  I bought a book on Photoshop CS many years ago, and once I installed it in my computer it says I should I enroll the account in order to use Photoshop (or something similar), and it also has a link to go directly to the website of the registry. The problem comes when I try to access this link given, which is an internet link. It appears that my Internet connection is not secure, so I'm not allowed to continue the process, even if I don't really no problem with the connection. As I'm talking about an older version of Photoshop CD, the problem might be that something related to the incompatibility with my version of microsoft. How can I solve this problem, if there is no possible solution?

  Hello

  You can try to use a different browser for this. You can also save the product key by following the steps

  (1) connect to Adobe.com/accounts

  2) click on the plans and the product.

  3) click view your products.

  (4) enter your serial under register no. your products

• Satellite A500 - problems with the temperature of the GPU

  The thing is playing Age of Empires online I started having problems with the temperature of the GPU. When you run the AIDA64 the CPU stress test can hold up well, but after 35 minutes the test what AIDA suspended while the GPU fan can't seem to download their revolutions, (I guess that if there was that a rise in temperature would increase the speed of rotation of the fan, don't).

  I consulted the manufacturer of the GPU, nVidia, (the graphic is nVidia GeForce GT 230 M) and tell me to contact Toshiba for other options, since, according to them, the problem is not the GPU.

  Any ideas or suggestions?

  You use your laptop to factory settings?
  Have you installed something that may be responsible for this (non-Toshiba display driver)?

• We get an error "there is a problem with the device' while trying to use it on the computer of Windows 8

  Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/getting-an-error-theres-a-problem-with-your-camera/9c494984-1178-4C3F-884c-80ac750d3fa6

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.

  If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Toshiba 46WL768 - problem with the HDMI connection

  Hello, my problem is the following:
  I have a Toshiba Regza TV 46WL768.
  I bought a Qviart Unic satellite receiver and when I connect to HDMI does not recognize.

  I tried another TV with HDMI decoder and works perfectly.

  I tried different HDMI toshiba configurations and does not.

  Connect another device via HDMI to the TV toshiba and if it works.
  I hope you can help me. Thanks in advance.

  If I understand you just all your TV's HDMI ports are working properly, no?
  In this case, you must contact Qviart Unic support and ask what may be the problem.

• Satellite C650 - stuck with the underscore and black screen boot

  Model: satellite C650

  Operating system: windows 7 Home premium

  Problem: when I try to turn on the computer I see the Toshiba screen and then a black screen with a underscore that blinks several times then stops, and the computer is blocked like that. The fan seems to be working. I can't go to mode without failure or boot options, even if I press f8 or f12 nonstop.

  Last time I started mode, I was stuck on the screen but the connection keyboard touchpad did not work and I couldn't stop. After that I have the strength of closing down and try to restart stuck like that. No beeps or anything like that.

  Any help would be appreciated.
  Thank you

  Good news.
  Thanks for the comments.

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye